arXiv subjects

J. M. Foster

Publications and source records attributed to J. M. Foster.

11 recordsLinked to original sources

arXiv2024

Multiple scales homogenisation of a porous viscoelastic material with rigid inclusions: application to lithium-ion battery electrodes

This paper explores the mechanical behaviour of the composite materials used in modern lithium-ion battery electrodes. These contain relatively high modulus active particle inclusions within a two-component matrix of liquid electrolyte which penetrates the pore space within a viscoelastic polymer binder. Deformations are driven by a combination of (i) swelling/contraction of the electrode particles in response to lithium insertion/extraction, (ii) swelling of the binder as it absorbs electrolyte, (iii) external loading and (iv) flow of the electrolyte within the pores. We derive the macroscale response of the composite using systematic multiple scales homomgenisation by exploiting the disparity in lengthscales associated with the size of an electrode particle and the electrode as a whole. The resulting effective model accurately replicates the behaviour of the original model (as is demonstrated by a series of relevant case studies) but, crucially, is markedly {simpler and hence} cheaper to solve. This is significant practical value because it facilitates low-cost, realistic computations of the mechanical states of battery electrodes, thereby allowing model-assisted development of battery designs that are better able to withstand the mechanical abuse encountered in practice and ultimately paving the way for longer-lasting batteries.

physics.comp-ph↗

arXiv2021

Parameterising continuum level Li-ion battery models & the LiionDB database

The Doyle-Fuller-Newman framework is the most popular physics-based continuum-level description of the chemical and dynamical internal processes within operating lithium-ion-battery cells. With sufficient flexibility to model a wide range of battery designs and chemistries, the framework provides an effective balance between detail, needed to capture key microscopic mechanisms, and simplicity, needed to solve the governing equations at a relatively modest computational expense. Nevertheless, implementation requires values of numerous model parameters, whose ranges of applicability, estimation, and validation pose challenges. This article provides a critical review of the methods to measure or infer parameters for use within the isothermal DFN framework, discusses their advantages or disadvantages, and clarifies limitations attached to their practical application. Accompanying this discussion we provide a searchable database, available at www.liiondb.com, which aggregates many parameters and state functions for the standard Doyle-Fuller-Newman model that have been reported in the literature.

physics.chem-ph↗

arXiv2021

Crystal plasticity finite element simulation of lattice rotation and x-ray diffraction during laser shock-compression of Tantalum

Wehrenberg et. al. [Nature 550 496 (2017)] used ultrafast in situ x-ray diffraction at the LCLS x-ray free-electron laser facility to measure large lattice rotations resulting from slip and deformation twinning in shock-compressed laser-driven [110] fibre textured tantalum polycrystal. We employ a crystal plasticity finite element method model, with slip kinetics based closely on the isotropic dislocation-based Livermore Multiscale Model [Barton et. al., J. Appl. Phys. 109 (2011)], to analyse this experiment. We elucidate the link between the degree of lattice rotation and the kinetics of plasticity, demonstrating that a transition occurs at shock pressures of $\sim$27 GPa, between a regime of relatively slow kinetics, resulting in a balanced pattern of slip system activation and therefore relatively small net lattice rotation, and a regime of fast kinetics, due to the onset of nucleation, resulting in a lop-sided pattern of deformation-system activation and therefore large net lattice rotations. We demonstrate a good fit between this model and experimental x-ray diffraction data of lattice rotation, and show that this data is constraining of deformation kinetics.

cond-mat.mtrl-sci↗

arXiv2020

Observations of Pressure Anisotropy Effects within Semi-Collisional Magnetized-Plasma Bubbles

Magnetized plasma interactions are ubiquitous in astrophysical and laboratory plasmas. Various physical effects have been shown to be important within colliding plasma flows influenced by opposing magnetic fields, however, experimental verification of the mechanisms within the interaction region has remained elusive. Here we discuss a laser-plasma experiment whereby experimental results verify that Biermann battery generated magnetic fields are advected by Nernst flows and anisotropic pressure effects dominate these flows in a reconnection region. These fields are mapped using time-resolved proton probing in multiple directions. Various experimental, modelling and analytical techniques demonstrate the importance of anisotropic pressure in semi-collisional, high-$β$ plasmas, causing a reduction in the magnitude of the reconnecting fields when compared to resistive processes. Anisotropic pressure dynamics are crucial in collisionless plasmas, but are often neglected in collisional plasmas. We show pressure anisotropy to be essential in maintaining the interaction layer, redistributing magnetic fields even for semi-collisional, high energy density physics (HEDP) regimes

physics.plasm-ph↗

arXiv2019

Generalised single particle models for high-rate operation of graded lithium-ion electrodes: systematic derivation and validation

A derivation of the single particle model (SPM) is made from a porous electrode theory model (or Newman model) of half-cell (dis)charge for an electrode composed of uniformly sized spherical electrode particles of a single chemistry. The derivation uses a formal asymptotic method based on the disparity between the size of the thermal voltage and that of the characteristic change in overpotential that occurs during (de)lithiation. Comparison is made between solutions to the SPM and to the porous electrode theory (PET) model for NMC, graphite and LFP. These are used to identify regimes where the SPM gives accurate predictions. For most chemistries, even at moderate (dis)charge rates, there are appreciable discrepancies between the PET model and the SPM which can be attributed to spatial non-uniformities in the electrolyte. This motivates us to calculate a correction term to the SPM. Once this has been incorporated into the model its accuracy is significantly improved. Generalised versions of the SPM, that can describe graded electrodes containing multiple electrode particle sizes (or chemistries), are also derived. The results of the generalised SPM, with the correction term, compare favourably to the full PET model where the active electrode material is either NMC or graphite.

physics.chem-ph↗

arXiv2018

A fast and robust numerical scheme for solving models of charge carrier transport and ion vacancy motion in perovskite solar cells

Drift-diffusion models that account for the motion of both electronic and ionic charges are important tools for explaining the hysteretic behaviour and guiding the development of metal halide perovskite solar cells. Furnishing numerical solutions to such models for realistic operating conditions is challenging owing to the extreme values of some of the parameters. In particular, those characterising (i) the short Debye lengths (giving rise to rapid changes in the solutions across narrow layers), (ii) the relatively large potential differences across devices and (iii) the disparity in timescales between the motion of the electronic and ionic species give rise to significant stiffness. We present a finite difference scheme with an adaptive time step that is posed on a non-uniform staggered grid that provides second order accuracy in the mesh spacing. The method is able to cope with the stiffness of the system for realistic parameters values whilst providing high accuracy and maintaining modest computational costs. For example, a transient sweep of a current-voltage curve can be computed in only a few minutes on a standard desktop computer.

physics.app-ph↗

arXiv2017

Systematic derivation of a surface polarization model for planar perovskite solar cells

Increasing evidence suggests that the presence of mobile ions in perovskite solar cells can cause a current-voltage curve hysteresis. Steady state and transient current-voltage characteristics of a planar metal halide CH$_3$NH$_3$PbI$_3$ perovskite solar cell are analysed with a drift-diffusion model that accounts for both charge transport and ion vacancy motion. The high ion vacancy density within the perovskite layer gives rise to narrow Debye layers (typical width $\sim$2nm), adjacent to the interfaces with the transport layers, over which large drops in the electric potential occur and in which significant charge is stored. Large disparities between (I) the width of the Debye layers and that of the perovskite layer ($\sim$600nm) and (II) the ion vacancy density and the charge carrier densities motivate an asymptotic approach to solving the model, while the stiffness of the equations renders standard solution methods unreliable. We derive a simplified surface polarisation model in which the slow ion dynamic are replaced by interfacial (nonlinear) capacitances at the perovskite interfaces. Favourable comparison is made between the results of the asymptotic approach and numerical solutions for a realistic cell over a wide range of operating conditions of practical interest.

physics.app-ph↗

arXiv2017

Counter-propagating radiative shock experiments on the Orion laser

We present new experiments to study the formation of radiative shocks and the interaction between two counter-propagating radiative shocks. The experiments were performed at the Orion laser facility which was used to drive shocks in xenon inside large aspect ratio gas-cells. The collision between the two shocks and their respective radiative precursors, combined with the formation of inherently 3-dimensional shocks, provides a novel platform particularly suited for benchmarking of numerical codes. The dynamics of the shocks before and after the collision were investigated using point-projection X-ray backlighting while, simultaneously, the electron density in the radiative precursor was measured via optical laser interferometry. Modelling of the experiments using the 2-D radiation hydrodynamic codes NYM/PETRA show a very good agreement with the experimental results.

physics.plasm-ph↗

arXiv2017

Counter-propagating radiative shock experiments on the Orion laser and the formation of radiative precursors

We present results from new experiments to study the dynamics of radiative shocks, reverse shocks and radiative precursors. Laser ablation of a solid piston by the Orion high-power laser at AWE Aldermaston UK was used to drive radiative shocks into a gas cell initially pressurised between $0.1$ and $1.0 \ bar$ with different noble gases. Shocks propagated at {$80 \pm 10 \ km/s$} and experienced strong radiative cooling resulting in post-shock compressions of { $\times 25 \pm 2$}. A combination of X-ray backlighting, optical self-emission streak imaging and interferometry (multi-frame and streak imaging) were used to simultaneously study both the shock front and the radiative precursor. These experiments present a new configuration to produce counter-propagating radiative shocks, allowing for the study of reverse shocks and providing a unique platform for numerical validation. In addition, the radiative shocks were able to expand freely into a large gas volume without being confined by the walls of the gas cell. This allows for 3-D effects of the shocks to be studied which, in principle, could lead to a more direct comparison to astrophysical phenomena. By maintaining a constant mass density between different gas fills the shocks evolved with similar hydrodynamics but the radiative precursor was found to extend significantly further in higher atomic number gases ($\sim$$4$ times further in xenon than neon). Finally, 1-D and 2-D radiative-hydrodynamic simulations are presented showing good agreement with the experimental data.

physics.plasm-ph↗

arXiv2011

Fluid Dynamics of Stellar Jets in Real Time: Third Epoch HST Images of HH 1, HH 34, and HH 47

We present new, third-epoch HST H-alpha and [S II] images of three HH jets (HH 1 and 2, HH 34, and HH 47) and compare these images with those from the previous epochs. The high-spatial resolution, coupled with a time-series whose cadence is of order both the hydrodynamical and radiative cooling timescales of the flow allows us to follow the hydrodynamical/magnetohydrodynamical evolution of an astrophysical plasma system in which ionization and radiative cooling play significant roles. Cooling zones behind the shocks are resolved, so it is possible to identify which way material flows through a given shock wave. The images show that heterogeneity is paramount in these jets, with clumps dominating the morphologies of both bow shocks and their Mach disks. This clumpiness exists on scales smaller than the jet widths and determines the behavior of many of the features in the jets. Evidence also exists for considerable shear as jets interact with their surrounding molecular clouds, and in several cases we observe shock waves as they form and fade where material emerges from the source and as it proceeds along the beam of the jet. Fine-structure within two extended bow shocks may result from Mach stems that form at the intersection points of oblique shocks within these clumpy objects. Taken together, these observations represent the most significant foray thus far into the time domain for stellar jets, and comprise one of the richest data sets in existence for comparing the behavior of a complex astrophysical plasma flows with numerical simulations and laboratory experiments.

astro-ph.SR↗

arXiv2009

Laboratory Experiments, Numerical Simulations, and Astronomical Observations of Deflected Supersonic Jets: Application to HH 110

Collimated supersonic flows in laboratory experiments behave in a similar manner to astrophysical jets provided that radiation, viscosity, and thermal conductivity are unimportant in the laboratory jets, and that the experimental and astrophysical jets share similar dimensionless parameters such as the Mach number and the ratio of the density between the jet and the ambient medium. Laboratory jets can be studied for a variety of initial conditions, arbitrary viewing angles, and different times, attributes especially helpful for interpreting astronomical images where the viewing angle and initial conditions are fixed and the time domain is limited. Experiments are also a powerful way to test numerical fluid codes in a parameter range where the codes must perform well. In this paper we combine images from a series of laboratory experiments of deflected supersonic jets with numerical simulations and new spectral observations of an astrophysical example, the young stellar jet HH 110. The experiments provide key insights into how deflected jets evolve in 3-D, particularly within working surfaces where multiple subsonic shells and filaments form, and along the interface where shocked jet material penetrates into and destroys the obstacle along its path. The experiments also underscore the importance of the viewing angle in determining what an observer will see. The simulations match the experiments so well that we can use the simulated velocity maps to compare the dynamics in the experiment with those implied by the astronomical spectra. The experiments support a model where the observed shock structures in HH 110 form as a result of a pulsed driving source rather than from weak shocks that may arise in the supersonic shear layer between the Mach disk and bow shock of the jet's working surface.

astro-ph.GA↗