arXiv subjects

J. M. Parpia

Publications and source records attributed to J. M. Parpia.

18 recordsLinked to original sources

arXiv2020

Fragility of surface states in topological superfluid $^3$He

Topological superfluid $^3$He, with unconventional spin-triplet p-wave pairing, provides a model system for topological superconductors, which have attracted significant interest through potential applications in topologically protected quantum computing. In topological insulators and quantum Hall systems, the surface/edge states, arising from bulk-surface correspondence and the momentum space topology of the band structure, are robust. Here we demonstrate that in topological superconductors the surface Andreev bound states, which depend on the momentum space topology of the emergent order parameter, are fragile with respect to the details of surface scattering. We confine superfluid $^3$He within a cavity of height comparable to the Cooper pair diameter. We precisely determine the superfluid transition temperature $T_{\mathrm{c}}$ and the suppression of the superfluid energy gap, for different scattering conditions tuned in situ, and compare to the predictions of quasi-classical theory. We discover that surface magnetic scattering leads to unexpectedly large suppression of $T_{\mathrm{c}}$, corresponding to an increased density of low energy bound states.

cond-mat.supr-con↗

arXiv2019

Thermal transport of helium-3 in a strongly confining channel

In a neutral system such as liquid helium-3, transport of mass, heat, and spin provide information analogous to electrical counterparts in metals, superconductors and topological materials. Of particular interest is transport in strongly confining channels of height approaching the superfluid coherence length, where new quantum states are found and excitations bound to surfaces and edges should be present. Here we report on the thermal conduction of helium-3 in a 1.1~$μ$m high microfabricated channel. In the normal state we observe a diffusive thermal conductivity that is approximately temperature independent, consistent with recent work on the interference of bulk and boundary scattering. In the superfluid state we measure diffusive thermal transport in the absence of thermal counterflow. An anomalous thermal response is also detected in the superfluid which we suggest may arise from a flux of surface excitations.

cond-mat.other↗

arXiv2018

New Phases of Superfluid $^3$He Confined in Aerogels

Liquid $^3$He confined in low-density, highly porous random solids such as silica aerogel provides tuneable systems to study the effects of disorder and confinement on the properties of a quantum liquid. New superfluid phases result from the interplay between disorder, confinement and complex symmetry-breaking. An extended bibliography is appended. An edited and abbreviated version of this article appeared in Physics Today 71, 11, 30 (2018).

cond-mat.supr-con↗

arXiv2018

Fabrication of micro fluidic cavities using Si-to-glass anodic bonding

We demonstrate the fabrication of $\sim$1.08 $μ$m deep microfluidic cavities with characteristic size as large as 7 mm $\times$ 11 mm or 11 mm diameter, using a silicon$-$glass anodic bonding technique that does not require posts to act as separators to define cavity height. Since the phase diagram of $^3$He is significantly altered under confinement, posts might act as pinning centers for phase boundaries. The previous generation of cavities relied on full wafer-bonding which is more prone to failure and requires dicing post-bonding, whereas the these cavities are made by bonding a pre-cut piece of Hoya SD-2 glass to a patterned piece of silicon in which the cavity is defined by etching. Anodic bonding was carried out at 425 $^{\circ}$C with 200 V, and we observe that pressurizing the cavity to failure ($>$ 30 bar pressure) results in glass breaking, rather than the glass-silicon bond separation. In this article, we discuss the detailed fabrication of the cavity, its edges, and details of the junction between the coin silver fill line and the silicon base of the cavity that enables a low internal-friction joint. This feature is important for mass coupling torsional oscillator experimental assays of the superfluid inertial contribution where a high quality factor ($Q$) improves frequency resolution. The surface preparation that yields well-characterized smooth surfaces to eliminate pinning sites, the use of transparent glass as a cover permitting optical access, low temperature capability and attachment of pressure-capable ports for fluid access may be features that are important in other applications.

physics.app-ph↗

arXiv2016

The A-B transition in superfluid 3He under confinement in a thin slab geometry

The influence of confinement on the topological phases of superfluid 3He is studied using the torsional pendulum method. We focus on the phase transition between the chiral A-phase and the time-reversal-invariant B-phase, motivated by the prediction of a spatiallymodulated (stripe) phase at the A-B phase boundary. We confine superfluid 3He to a single 1.08 μm thick nanofluidic cavity incorporated into a high-precision torsion pendulum, and map the phase diagram between 0.1 and 5.6 bar. We observe only small supercooling of the A-phase, in comparison to bulk or when confined in aerogel. This has a non-monotonic pressure dependence, suggesting that a new intrinsic B-phase nucleation mechanism operates under confinement, mediated by the putative stripe phase. Both the phase diagram and the relative superfluid fraction of the A and B phases, show that strong coupling is present at all pressures, with implications for the stability of the stripe phase.

cond-mat.supr-con↗

arXiv2016

Tunable phonon cavity coupling in graphene membranes

A major achievement of the past decade has been the realization of macroscopic quantum systems by exploiting interactions between optical cavities and mechanical resonators. In these systems, phonons are coherently annihilated or created in exchange for photons. Similar phenomena have recently been observed through "phonon cavity" coupling -- energy exchange between modes of a single system as mediated by intrinsic material nonlinearity. To date, this has been demonstrated primarily for bulk crystalline, high-quality-factor (Q>100,000) mechanical systems operated at cryogenic temperatures. Here we propose graphene as an ideal candidate for the study of such nonlinear mechanics. The large elastic modulus of this material and capability for spatial symmetry breaking via electrostatic forces is expected to generate a wealth of nonlinear phenomena, including tunable inter-modal coupling. We have fabricated circular graphene membranes and report strong phonon cavity effects at room temperature, despite the modest Q (~100) of this system. We observe both amplification into parametric instability ("mechanical lasing") and cooling of Brownian motion in the fundamental mode through excitation of cavity sidebands. Furthermore, we characterize quenching of these parametric effects at large vibrational amplitudes, offering a window on the all-mechanical analogue of cavity optomechanics, where observation of such effects has proven elusive.

cond-mat.mes-hall↗

arXiv2013

Dissipation signatures of the normal and superfluid phases in torsion pendulum experiments with 3He in aerogel

We present data for energy dissipation factor (Q^{-1}) over a broad temperature range at various pressures of a torsion pendulum setup used to study 3He confined in a 98% open silica aerogel. Values for Q^{-1} above T_c are temperature independent and have a weak pressure dependence. Below T_c, a deliberate axial compression of the aerogel by 10% widens the range of metastability for a superfluid Equal Spin Pairing (ESP) state; we observe this ESP phase on cooling and the B phase on warming over an extended temperature region. While the dissipation for the B phase tends to zero as T goes to 0, Q^{-1} exhibits a peak value greater than that at T_c at intermediate temperatures. Values for Q^{-1} in the ESP phase are consistently higher than in the B phase and are proportional to ρ_s/ρuntil the ESP to B phase transition is attained. We apply a viscoelastic collision-drag model, which couples the motion of the helium and the aerogel through a frictional relaxation time τ_f. Our dissipation data is not sensitive to the damping due to the presumed small but non-zero value of τ_f. The result is that an additional mechanism to dissipate energy not captured in the collision-drag model and related to the emergence of the superfluid order must exist. The extra dissipation below T_c is possibly associated with mutual friction between the superfluid phases and the clamped normal fluid. The pressure dependence of the measured dissipation in both superfluid phases is likely related to the pressure dependence of the gap structure of the "dirty" superfluid. The large dissipation in the ESP state is consistent with the phase being the A or the Polar with the order parameter nodes oriented in the plane of the cell and perpendicular to the aerogel anisotropy axis.

cond-mat.supr-con↗

arXiv2013

Simultaneous Electrical and Optical Readout of Graphene-Coated High Q Silicon Nitride Resonators

We have fabricated and tested mechanical resonators consisting of a single-atomic-layer of graphene deposited on suspended silicon nitride membranes. With the addition of the graphene layer we retain the desirable mechanical properties of silicon nitride but utilize the electrical and optical properties of graphene to transduce resonant motion by both optical and electrical means. By positioning the graphene-on-silicon-nitride drums in a tunable optical cavity we observe position dependent damping and resonant frequency control of the devices due to optical absorption by graphene.

cond-mat.mes-hall↗

arXiv2012

Contribution of Acoustic Losses in the Quality Factor of a Micromechanical Resonator

A semi-analytical study of the acoustic radiation losses associated with various transverse vibration modes of a micromechanical (MEMS) annular resonator is presented. The quality factor, Q, of such resonators is of interest in many applications and depends on structural geometry, interaction with the external environment, and the encapsulation method. Resonators with at least one surface exposed to air can display losses through acoustic radiation even at micro meter dimensions. Published experimental results suggest the dominance of acoustic losses in the Q of a MEMS drum resonator. In this study, a well established mathematical techniques to analytically model resonator vibration modes and fluid-structure interaction are used, and a semi-analytical procedure for computing Q due to acoustic radiation losses, Qac, in any vibrational mode outlined. Present technique includes calculation of the exact mode shape and its utilization in computing Qac. The dependence of Qac on the first 15 mode shapes is computed. Results are compared for the lowest 2 modes of a solid circular resonator using exact mode shapes to those of Lamb's approximate mode shapes. Comparison to published experimental results validates the predictive utility of the technique, especially for higher modes where acoustic radiation seems to be the dominant constituent of Q.

physics.flu-dyn↗

arXiv2012

Stamp transferred suspended graphene mechanical resonators for radio-frequency electrical readout

We present a simple micromanipulation technique to transfer suspended graphene flakes onto any substrate and to assemble them with small localized gates into mechanical resonators. The mechanical motion of the graphene is detected using an electrical, radio-frequency (RF) reflection readout scheme where the time-varying graphene capacitor reflects a RF carrier at f=5-6 GHz producing modulation sidebands at f +/- fm. A mechanical resonance frequency up to fm=178 MHz is demonstrated. We find both hardening/softening Duffing effects on different samples, and obtain a critical amplitude of ~40 pm for the onset of nonlinearity in graphene mechanical resonators. Measurements of the quality factor of the mechanical resonance as a function of DC bias voltage Vdc indicate that dissipation due to motion-induced displacement currents in graphene electrode is important at high frequencies and large Vdc.

cond-mat.mes-hall↗

arXiv2011

Modification of the 3He Phase Diagram by Anisotropic Disorder

Motivated by the recent prediction that uniaxially compressed aerogel can stabilize the anisotropic A phase over the isotropic B phase, we measure the pressure dependent superfluid fraction of 3He entrained in 10% axially compressed, 98% porous aerogel. We observe that a broad region of the temperature-pressure phase diagram is occupied by the metastable A phase. The reappearance of the A phase on warming from the B phase, before superfluidity is extinguished at Tc, is in contrast to its absence in uncompressed aerogel. The phase diagram is modified from that of pure 3He, with the disappearance of the polycritical point (PCP) and the appearance of a region of A phase extending below the PCP of bulk 3He, even in zero applied magnetic field. The expected alignment of the A phase texture by compression is not observed.

cond-mat.other↗

arXiv2011

Quantum transport in mesoscopic $^3$He films: experimental study of the interference of bulk and boundary scattering

We discuss the mass transport of a degenerate Fermi liquid $^3$He film over a rough surface, and the film momentum relaxation time, in the framework of theoretical predictions. In the mesoscopic régime, the anomalous temperature dependence of the relaxation time is explained in terms of the interference between elastic boundary scattering and inelastic quasiparticle-quasiparticle scattering within the film. We exploit a quasiclassical treatment of quantum size effects in the film in which the surface roughness, whose power spectrum is experimentally determined, is mapped into an effective disorder potential within a film of uniform thickness. Confirmation is provided by the introduction of elastic scattering centres within the film. We model further studies on $^3$He confined in nanofluidic sample chambers with lithographically defined surface roughness. The improved understanding of surface roughness scattering may impact on enhancing the conductivity in thin metallic films.

cond-mat.mtrl-sci↗

arXiv2010

Mass coupling and $Q^{-1} of impurity-limited normal $^3$He in a torsion pendulum

We present results of the $Q^{-1}$ and period shift, $ΔP$, for $^3$He confined in a 98% nominal open aerogel on a torsion pendulum. The aerogel is compressed uniaxially by 10% along a direction aligned to the torsion pendulum axis and was grown within a 400 $μ$m tall pancake (after compression) similar to an Andronikashvili geometry. The result is a high $Q$ pendulum able to resolve $Q^{-1}$ and mass coupling of the impurity-limited $^3$He over the whole temperature range. After measuring the empty cell background, we filled the cell above the critical point and observe a temperature dependent period shift, $ΔP$, between 100 mK and 3 mK that is 2.9$%$ of the period shift (after filling) at 100 mK. The $Q^{-1}$ due to the $^3$He decreases by an order of magnitude between 100 mK and 3 mK at a pressure of $0.14\pm0.03$ bar. We compare the observable quantities to the corresponding calculated $Q^{-1}$ and period shift for bulk $^3$He.

cond-mat.mtrl-sci↗

arXiv2010

High-Q Nanomechanics via Destructive Interference of Elastic Waves

Mechanical dissipation poses an ubiquitous challenge to the performance of nanomechanical devices. Here we analyze the support-induced dissipation of high-stress nanomechanical resonators. We develop a model for this loss mechanism and test it on silicon nitride membranes with circular and square geometries. The measured Q-values of different harmonics present a non-monotonic behavior which is successfully explained. For azimuthal harmonics of the circular geometry we predict that destructive interference of the radiated waves leads to an exponential suppression of the clamping loss in the harmonic index. Our model can also be applied to graphene drums under high tension.

cond-mat.mes-hall↗

arXiv2003

Dissipation in Nanocrystalline-Diamond Nanomechanical Resonators

We have measured the dissipation and frequency of nanocrystalline-diamond nanomechanical resonators with resonant frequencies between 13.7 MHz and 157.3 MHz, over a temperature range of 1.4-274 K. Using both magnetomotive network analysis and a novel time-domain ring-down technique, we have found the dissipation in this material to have a temperature dependence roughly following T^0.2, with Q^-1 = 10^-4 at low temperatures. The frequency dependence of a large dissipation feature at ~35-55 K is consistent with thermal activation over a 0.02 eV barrier with an attempt frequency of 10 GHz.

cond-mat↗

arXiv2002

Heat Capacity of ^3He in Aerogel

The heat capacity of pure ^3He in low density aerogel is measured at 22.5 bar. The superfluid response is simultaneously monitored with a torsional oscillator. A slightly rounded heat capacity peak, 65 mu K in width, is observed at the ^3He-aerogel superfluid transition, T_{ca}. Subtracting the bulk ^3He contribution, the heat capacity shows a Fermi-liquid form above T_{ca}. The heat capacity attributed to superfluid within the aerogel can be fit with a rounded BCS form, and accounts for 0.30 of the non-bulk fluid in the aerogel, indicating a substantial reduction in the superfluid order parameter consistent with earlier superfluid density measurements.

cond-mat.supr-con↗

arXiv1999

Universal Behaviour of the Superfluid Fraction and Tc of He-3 in 99.5% Open Aerogel

We have investigated the superfluid transition of He-3 in a 99.5% porosity silica aerogel. This very dilute sample shows behaviour intermediary between bulk He-3 and He-3 confined to the denser aerogels previously studied. We present data on both the superfluid transition temperature and the superfluid density and compare our results with previous measurements. Finally, we show that the suppression of the superfluid transition temperature and suppression of the superfluid density of He-3 in aerogel follow a universal relation for a range of aerogel samples.

cond-mat↗

arXiv1999

Low temperature acoustic properties of amorphous silica and the Tunneling Model

Internal friction and speed of sound of a-SiO(2) was measured above 6 mK using a torsional oscillator at 90 kHz, controlling for thermal decoupling, non-linear effects, and clamping losses. Strain amplitudes e(A) = 10^{-8} mark the transition between the linear and non-linear regime. In the linear regime, excellent agreement with the Tunneling Model was observed for both the internal friction and speed of sound, with a cut-off energy of E(min) = 6.6 mK. In the non-linear regime, two different behaviors were observed. Above 10 mK the behavior was typical for non-linear harmonic oscillators, while below 10 mK a different behavior was found. Its origin is not understood.

cond-mat.dis-nn↗