Searcharxiv⌕ Search

arXiv subjects

J. M. Pearson

Publications and source records attributed to J. M. Pearson.

36 records · Page 2Linked to original sources
arXiv2012

Inner crust of neutron stars with mass-fitted Skyrme functionals

The equation of state and composition of the inner crust of neutron stars at zero temperature are calculated, using the T = 0 version of the TETFSI (temperature-dependent extended Thomas-Fermi plus Strutinsky integral) method, for each of a family of three functionals based on Skyrme-type forces BSk19, BSk20 and BSk21, which are characterized by different degrees of symmetry-energy stiffness, and also for the SLy4 functional. We also solve the Tolman-Oppenheimer-Volkoff equations to calculate the distribution of mass within the inner crust. Qualitatively similar results are found for all four functionals, and in particular the number of protons per Wigner-Seitz cell is in all cases equal to 40 throughout the inner crust.

nucl-th↗
arXiv2012

Pairing: from atomic nuclei to neutron-star crusts

Nuclear pairing is studied both in atomic nuclei and in neutron-star crusts in the unified framework of the energy-density functional theory using generalized Skyrme functionals complemented with a local pairing functional obtained from many-body calculations in homogeneous nuclear matter using realistic forces.

nucl-th↗
arXiv2011

Masses of neutron stars and nuclei

We calculate the maximum mass of neutron stars for three different equations of state (EOS) based on generalized Skyrme functionals that are simultaneously fitted to essentially all the 2003 nuclear mass data (the rms deviation is 0.58 MeV in all three cases) and to one or other of three different equations of state of pure neutron matter, each determined by a different many-body calculation using realistic two- and three-body interactions but leading to significantly different degrees of stiffness at the high densities prevailing in neutron-star interiors. The observation of a neutron star with mass 1.97 $\pm$ 0.04 $\mathcal{M}_{\odot}$ eliminates the softest of our models (BSk19), but does not discriminate between BSk20 and BSk21. However, nuclear-mass measurements that have been made since our models were constructed strongly favor BSk21, our stiffest functional.

nucl-th↗
arXiv2011

The decompression of the outer neutron star crust and r-process nucleosynthesis

The rapid neutron-capture process, or r-process, is known to be fundamental for explaining the origin of approximately half of the A>60 stable nuclei observed in nature. In recent years nuclear astrophysicists have developed more and more sophisticated r-process models, by adding new astrophysical or nuclear physics ingredients to explain the solar system composition in a satisfactory way. Despite these efforts, the astrophysical site of the r-process remains unidentified. The composition of the neutron star outer crust material is investigated after the decompression that follows its possible ejection. The composition of the outer crust of a neutron star is estimated before and after decompression. Two different possible initial conditions are considered, namely an idealized crust composed of cold catalyzed matter and a crust initially in nuclear statistical equilibrium at temperatures around 10 GK. We show that in this second case before decompression and at temperatures typically corresponding to 8 GK, the Coulomb effect due to the high densities in the crust leads to an overall composition of the outer crust in neutron-rich nuclei with a mass distribution close to the solar system r-abundance distribution. Such distributions differ, however, from the solar one due to a systematic shift in the second peak to lower values. After decompression, the capture of the few neutrons per seed nucleus available in the hot outer crust leads to a final distribution of stable neutron-rich nuclei with a mass distribution of 80 < A < 140 nuclei in excellent agreement with the solar distribution, provided the outer crust is initially at temperatures around 8 GK and all layers of the outer crust are ejected. The decompression of the neutron star matter from the outer crust provides suitable conditions for a robust r-processing of the light species, i.e., r-nuclei with A < 140.

astro-ph.SR↗
arXiv2010

Generalized equation of state for cold superfluid neutron stars

Mature neutron stars are expected to contain various kinds of superfluids in their interiors. Modeling such stars requires the knowledge of the mutual entrainment couplings between the different condensates. We present a unified equation of state describing the different regions of a neutron star with superfluid neutrons and superconducting protons in its core.

astro-ph.HE↗
arXiv2010

Further explorations of Skyrme-Hartree-Fock-Bogoliubov mass formulas. XII: Stiffness and stability of neutron-star matter

We construct three new Hartree-Fock-Bogoliubov (HFB) mass models, labeled HFB-19, HFB-20, and HFB-21, with unconventional Skyrme forces containing $t_4$ and $t_5$ terms, i.e., density-dependent generalizations of the usual $t_1$ and $t_2$ terms, respectively. The new forces underlying these models are fitted respectively to three different realistic equations of state of neutron matter for which the density dependence of the symmetry energy ranges from the very soft to the very stiff, reflecting thereby our present lack of complete knowledge of the high-density behavior of nuclear matter. All unphysical instabilities of nuclear matter, including the transition to a polarized state in neutron-star matter, are eliminated with the new forces. At the same time the new models fit essentially all the available mass data with rms deviations of 0.58 MeV and give the same high quality fits to measured charge radii that we obtained in earlier models with conventional Skyrme forces. Being constrained by neutron matter, these new mass models, which all give similar extrapolations out to the neutron drip line, are highly appropriate for studies of the $r$-process and the outer crust of neutron stars. Moreover, the underlying forces, labeled BSk19, BSk20 and BSk21, respectively, are well adapted to the study of the inner crust and core of neutron stars. The new family of Skyrme forces thus opens the way to a unified description of all regions of neutron stars.

nucl-th↗
arXiv2010

Breathing-mode measurements in Sn isotopes and isospin dependence of nuclear incompressibility

T. Li {\it et al.}[Phys. Rev. C {\bf 81}, 034309 (2010)] have analyzed their measured breathing-mode energies of some tin isotopes in terms of a first-order leptodermous expansion, and find for the symmetry-incompressibility coefficient $K_τ$ the value of -550 $\pm$ 100 MeV. Removing an approximation that they made, we find that the first-order estimate of $K_τ$ shifts to -661 $\pm$ 144 MeV. However, taking into account higher-order terms in the leptodermous expansion shows that the data are compatible with the significantly lower magnitudes indicated by both another experiment and some theoretical estimates.

nucl-th↗
arXiv2010

Unified description of neutron superfluidity in the neutron-star crust with analogy to anisotropic multi-band BCS superconductors

The neutron superfluidity in the inner crust of a neutron star has been traditionally studied considering either homogeneous neutron matter or only a small number of nucleons confined inside the spherical Wigner-Seitz cell. Drawing analogies with the recently discovered multi-band superconductors, we have solved the anisotropic multi-band BCS gap equations with Bloch boundary conditions, thus providing a unified description taking consistently into account both the free neutrons and the nuclear clusters. Calculations have been carried out using the effective interaction underlying our recent Hartree-Fock-Bogoliubov nuclear mass model HFB-16. We have found that even though the presence of inhomogeneities lowers the neutron pairing gaps, the reduction is much less than that predicted by previous calculations using the Wigner-Seitz approximation. We have studied the disappearance of superfluidity with increasing temperature. As an application we have calculated the neutron specific heat, which is an important ingredient for modeling the thermal evolution of newly-born neutron stars. This work provides a new scheme for realistic calculations of superfluidity in neutron-star crusts.

nucl-th↗
arXiv2009

Further explorations of Skyrme-Hartree-Fock-Bogoliubov mass formulas. XI: Stabilizing neutron stars against a ferromagnetic collapse

We construct a new Hartree-Fock-Bogoliubov (HFB) mass model, labeled HFB-18, with a generalized Skyrme force. The additional terms that we have introduced into the force are density-dependent generalizations of the usual $t_1$ and $t_2$ terms, and are chosen in such a way as to avoid the high-density ferromagnetic instability of neutron stars that is a general feature of conventional Skyrme forces, and in particular of the Skyrme forces underlying all the HFB mass models that we have developed in the past. The remaining parameters of the model are then fitted to essentially all the available mass data, an rms deviation $σ$ of 0.585 MeV being obtained. The new model thus gives almost as good a mass fit as our best-fit model HFB-17 ($σ$ = 0.581 MeV), and has the advantage of avoiding the ferromagnetic collapse of neutron stars.

nucl-th↗
arXiv2009

Recent breakthroughs in Skyrme-Hartree-Fock-Bogoliubov mass formulas

We review our recent achievements in the construction of microscopic mass tables based on the Hartree-Fock-Bogoliubov method with Skyrme effective interactions. In the latest of our series of HFB-mass models, we have obtained our best fit ever to essentially all the available mass data, by treating the pairing more realistically than in any of our earlier models. The rms deviation on the 2149 measured masses of nuclei with N and Z>8 has been reduced for the first time in a mean field approach to 0.581 MeV. With the additional constraint on the neutron-matter equation of state, this new force is thus very well-suited for the study of neutron-rich nuclei and for the description of astrophysical environments like supernova cores and neutron-star crusts.

nucl-th↗
arXiv2009

Skyrme-Hartree-Fock-Bogoliubov nuclear mass formulas: Crossing the 0.6 MeV threshold with microscopically deduced pairing

We present a new Skyrme-Hartree-Fock-Bogoliubov nuclear-mass model in which the contact-pairing force is constructed from microscopic pairing gaps of symmetric nuclear matter and neutron matter calculated from realistic two- and three-body forces, with medium-polarization effects included. With the pairing being treated more realistically than in any of our earlier models, the rms deviation with respect to essentially all the available mass data falls to 0.581 MeV, the best value ever found within the mean-field framework. Since our Skyrme force is also constrained by the properties of pure neutron matter, this new model is particularly well suited for application to astrophysical problems involving a neutron-rich environment, such as the elucidation of the r process of nucleosynthesis, and the description of supernova cores and neutron-star crusts.

nucl-th↗
arXiv2008

Further explorations of Skyrme-Hartree-Fock-Bogoliubov mass formulas. IX: Constraint of pairing force to $^1S_0$ neutron-matter gap

In this latest of our series of Skyrme-HFB mass models, HFB-16, we introduce the new feature of requiring that the contact pairing force reproduce at each density the $^1S_0$ pairing gap of neutron matter as determined in microscopic calculations with realistic nucleon-nucleon forces. We retain the earlier constraints on the Skyrme force of reproducing the energy-density curve of neutron matter, and of having an isoscalar effective mass of $0.8M$ in symmetric infinite nuclear matter at the saturation density; we also keep the recently adopted device of dropping Coulomb exchange. Furthermore, the correction term for the spurious energy of collective motion has a form that is known to favour fission barriers that are in good agreement with experiment. Despite the extra constraints on the effective force, we have achieved a better fit to the mass data than any other mean field model, the rms error on the 2149 measured masses of nuclei with $N$ and $Z \ge$ 8 having been reduced to 0.632 MeV; the improvement is particularly striking for the most neutron-rich nuclei. Moreover, it turns out that even with no flexibility at all remaining for the pairing force, the spectral pairing gaps that we find suggest that level densities in good agreement with experiment should be obtained. This new force is thus particularly well-suited for astrophysical applications, such as stellar nucleosynthesis and neutron-star crusts.

nucl-th↗
arXiv2008

Semi-classical equation of state and specific heats for neutron-star inner crust with proton shell corrections

An approach to the equation of state for the inner crust of neutron stars based on Skyrme-type forces is presented. Working within the Wigner-Seitz picture, the energy is calculated by the TETF (temperature-dependent extended Thomas-Fermi) method, with proton shell corrections added self-consistently by the Strutinsky-integral method. Using a Skyrme force that has been fitted to both neutron matter and to essentially all the nuclear mass data, we find strong proton shell effects: proton numbers $Z$ = 50, 40 and 20 are the only values possible in the inner crust, assuming that nuclear equilibrium is maintained in the cooling neutron star right down to the ambient temperature. Convergence problems with the TETF expansion for the entropy, and our way of handling them, are discussed. Full TETF expressions for the specific heat of inhomogeneous nuclear matter are presented. Our treatment of the electron gas, including its specific heat, is essentially exact, and is described in detail.

nucl-th↗
arXiv2004

The r-process nucleosynthesis: a continued challenge for nuclear physics and astrophysics

The identification of the astrophysical site and the specific conditions in which r-process nucleosynthesis takes place remain unsolved mysteries of astrophysics. The present paper emphasizes some important future challenges faced by nuclear physics in this problem, particularly in the determination of the radiative neutron capture rates by exotic nuclei close to the neutron drip line and the fission probabilities of heavy neutron-rich nuclei. These quantities are particularly relevant to determine the composition of the matter resulting from the decompression of initially cold neutron star matter. New detailed r-process calculations are performed and the final composition of ejected inner and outer neutron star crust material is estimated. We discuss the impact of the many uncertainties in the astrophysics and nuclear physics on the final composition of the ejected matter. The similarity between the predicted and the solar abundance pattern for A > 140 nuclei as well as the robustness of the prediction with varied input parameters makes this scenario one of the most promising that deserves further exploration.

astro-ph↗
arXiv2004

Further explorations of Skyrme-Hartree-Fock-Bogoliubov mass formulas. III: Role of particle-number projection

Starting from HFB-6, we have constructed a new mass table, referred to as HFB-8, including all the 9200 nuclei lying between the two drip lines over the range of Z and N > 6 and Z < 122. It differs from HFB-6 in that the wave function is projected on the exact particle number. Like HFB-6, the isoscalar effective mass is constrained to the value 0.80 M and the pairing is density independent. The rms errors of the mass-data fit is 0.635 MeV, i.e. better than almost all our previous HFB mass formulas. The extrapolations of this new mass formula out to the drip lines do not differ significantly from the previous HFB-6 mass formula.

nucl-th↗
arXiv2003

Further explorations of Skyrme-Hartree-Fock-Bogoliubov mass formulas. II: Role of the effective mass

We have constructed four new complete mass tables, referred to as HFB-4 to HFB-7, each one including all the 9200 nuclei lying between the two drip lines over the range of Z and N>8 and Z<120. HFB-4 and HFB-5 have the isoscalar effective mass M*_s$ constrained to the value 0.92 M, with the former having a density-independent pairing, and the latter a density-dependent pairing. HFB-6 and HFB-7 are similar, except that M*_s is constrained to 0.8 M. The rms errors of the mass-data fits are 0.680, 0.675, 0.686, and 0.676 MeV, respectively, almost as good as for the HFB-2 mass formula, for which M*_s was unconstrained. However, as usual, the single-particle spectra depend significantly on M*_s. This decoupling of the mass fits from the fits to the single-particle spectra has been achieved only by making the cutoff parameter of the delta-function pairing force a free parameter. An improved treatment of the center-of-mass correction was adopted, but although this makes a difference to individual nuclei it does not reduce the overall rms error of the fit. The extrapolations of all four new mass formulas out to the drip lines are essentially the same as for the original HFB-2 mass formula.

nucl-th↗
arXiv2000

Fission barriers of neutron-rich and superheavy nuclei calculated with the ETFSI method

Using the ETFSI (extended Thomas-Fermi plus Strutinsky integral) method, we have calculated the fission barriers of nearly 2000 exotic nuclei, including all the neutron-rich nuclei up to A=318 that are expected to be relevant to the r-process, and all the superheavy nuclei in the vicinity of N=184, with Z<=120. Our calculations were performed with the Skyrme force SkSC4, which was determined in the ETFSI-1 mass fit. For proton-deficient nuclei in the region of N=184 we find the barriers to be much higher than previously believed, which suggests that the r-process path might continue to mass numbers well beyond 300. For the superheavy nuclei we typically find barrier heights of 6-7 MeV.

nucl-th↗