arXiv subjects

J. M. Pittard

Publications and source records attributed to J. M. Pittard.

At least 37 records · Page 2Linked to original sources

arXiv2017

Variable millimetre radiation from the colliding-wind binary Cyg OB2 #8A

In the colliding-wind region of massive binaries, non-thermal radio emission occurs. This non-thermal radio emission (due to synchrotron radiation) has so far been observed at centimetre wavelengths. At millimetre wavelengths, the stellar winds and the colliding-wind region emit more thermal free-free radiation, and it is expected that any non-thermal contribution will be difficult or impossible to detect. We aim to determine if the material in the colliding-wind region contributes substantially to the observed millimetre fluxes of a colliding-wind binary. We also try to distinguish the synchrotron emission from the free-free emission. We monitored the massive binary Cyg OB2 #8A at 3 mm with the NOrthern Extended Millimeter Array (NOEMA) interferometer of the Institut de Radioastronomie Millimetrique (IRAM). The data were collected in 14 separate observing runs (in 2014 and 2016), and provide good coverage of the orbital period. The observed millimetre fluxes range between 1.1 and 2.3 mJy, and show phase-locked variability, clearly indicating that a large part of the emission is due to the colliding-wind region. A simple synchrotron model gives fluxes with the correct order of magnitude, but with a maximum that is phase-shifted with respect to the observations. Qualitatively this phase shift can be explained by our neglect of orbital motion on the shape of the colliding-wind region. A model using only free-free emission results in only a slightly worse explanation of the observations. Additionally, on the map of our observations we also detect the O6.5 III star Cyg OB2 #8B, for which we determine a 3 mm flux of 0.21 +- 0.033 mJy. The question of whether synchrotron radiation or free-free emission dominates the millimetre fluxes of Cyg OB2 #8A remains open. More detailed modelling of this system, based on solving the hydrodynamical equations, is required to give a definite answer.

astro-ph.SR↗

arXiv2017

A comparison of shock-cloud and wind-cloud interactions: The longer survival of clouds in winds

The interaction of a hot, high-velocity wind with a cold, dense molecular cloud has often been assumed to resemble the evolution of a cloud embedded in a post-shock flow. However, no direct comparative study of these two processes currently exists in the literature. We present 2D adiabatic hydrodynamical simulations of the interaction of a Mach 10 shock with a cloud of density contrast $χ= 10$ and compare our results with those of a commensurate wind-cloud simulation. We then investigate the effect of varying the wind velocity, effectively altering the wind Mach number $M_{wind}$, on the cloud's evolution. We find that there are significant differences between the two processes: 1) the transmitted shock is much flatter in the shock-cloud interaction; 2) a low-pressure region in the wind-cloud case deflects the flow around the edge of the cloud in a different manner to the shock-cloud case; 3) there is far more axial compression of the cloud in the case of the shock. As $M_{wind}$ increases, the normalised rate of mixing is reduced. Clouds in winds with higher $M_{wind}$ also do not experience a transmitted shock through the cloud's rear and are more compressed axially. In contrast with shock-cloud simulations, the cloud mixing time normalised by the cloud-crushing time-scale $t_{cc}$ increases for increasing $M_{wind}$ until it plateaus (at $t_{mix} \simeq 25 \, t_{cc}$) at high $M_{wind}$, thus demonstrating the expected Mach scaling. In addition, clouds in high Mach number winds are able to survive for long durations and are capable of being moved considerable distances.

astro-ph.GA↗

arXiv2017

Hydrodynamic ablation of protoplanetary disks via supernovae

We present three-dimensional simulations of a protoplanetary disk subject to the effect of a nearby (0.3pc distant) supernova, using a time-dependent flow from a one dimensional numerical model of the supernova remnant (SNR), in addition to constant peak ram pressure simulations. Simulations are performed for a variety of disk masses and inclination angles. We find disk mass-loss rates that are typically 1e-7 to 1e-6 Msol/yr (but peak near 1e-5 Msol/yr during the "instantaneous" stripping phase) and are sustained for around 200 yr. Inclination angle has little effect on the mass loss unless the disk is close to edge-on. Inclined disks also strip asymmetrically with the trailing edge ablating more easily. Since the interaction lasts less than one outer rotation period, there is not enough time for the disk to restore its symmetry, leaving the disk asymmetrical after the flow has passed. Of the low-mass disks considered, only the edge-on disk is able to survive interaction with the SNR (with 50% of its initial mass remaining). At the end of the simulations, disks that survive contain fractional masses of SN material up to 5e-6. This is too low to explain the abundance of short-lived radionuclides in the early solar system, but a larger disk and the inclusion of radiative cooling might allow the disk to capture a higher fraction of SN material.

astro-ph.SR↗

arXiv2016

Magnetohydrodynamic simulations of mechanical stellar feedback in a sheet-like molecular cloud

We have used the AMR hydrodynamic code, MG, to perform 3D magnetohydrodynamic simulations with self-gravity of stellar feedback in a sheet-like molecular cloud formed through the action of the thermal instability. We simulate the interaction of the mechanical energy input from a 15 solar mass star and a 40 solar mass star into a 100 pc-diameter 17000 solar mass cloud with a corrugated sheet morphology that in projection appears filamentary. The stellar winds are introduced using appropriate Geneva stellar evolution models. In the 15 solar mass star case, the wind forms a narrow bipolar cavity with minimal effect on the parent cloud. In the 40 solar mass star case, the more powerful stellar wind creates a large cylindrical cavity through the centre of the cloud. After 12.5 Myrs and 4.97 Myrs respectively, the massive stars explode as supernovae (SNe). In the 15 solar mass star case, the SN material and energy is primarily deposited into the molecular cloud surroundings over ~10^5 years before the SN remnant escapes the cloud. In the 40 solar mass star case, a significant fraction of the SN material and energy rapidly escapes the molecular cloud along the wind cavity in a few tens of kiloyears. Both SN events compress the molecular cloud material around them to higher densities (so may trigger further star formation), and strengthen the magnetic field, typically by factors of 2-3 but up to a factor of 10. Our simulations are relevant to observations of bubbles in flattened ring-like molecular clouds and bipolar HII regions.

astro-ph.GA↗

arXiv2016

The interaction of a magnetohydrodynamical shock with a filament

We present 3D magnetohydrodynamic numerical simulations of the adiabatic interaction of a shock with a dense, filamentary cloud. We investigate the effects of various filament lengths and orientations on the interaction using different orientations of the magnetic field, and vary the Mach number of the shock, the density contrast of the filament, and the plasma beta, in order to determine their effect on the evolution and lifetime of the filament. We find that in a parallel magnetic field filaments have longer lifetimes if they are orientated more 'broadside' to the shock front, and that an increase in the density contrast hastens the destruction of the cloud, in terms of the modified cloud-crushing time-scale, tcs. The combination of a mild shock and a perpendicular or oblique field provides the best condition for extending the life of the filament, with some filaments able to survive almost indefinitely since they are cocooned by the magnetic field. A high value for the density contrast does not initiate large turbulent instabilities in either the perpendicular or oblique field cases but rather draws the filament out into long tendrils which may eventually fragment. In addition, flux ropes are only formed in parallel magnetic fields. The length of the filament is, however, not as important for the evolution and destruction of a filament.

astro-ph.GA↗

arXiv2016

MHD simulation of the formation of clumps and filaments in quiescent diffuse medium by thermal instability

We have used the AMR hydrodynamic code, MG, to perform idealised 3D MHD simulations of the formation of clumpy and filamentary structure in a thermally unstable medium without turbulence. A stationary thermally unstable spherical diffuse atomic cloud with uniform density in pressure equilibrium with low density surroundings was seeded with random density variations and allowed to evolve. A range of magnetic field strengths threading the cloud have been explored, from beta=0.1 to beta=1.0 to the zero magnetic field case (beta=infinity), where beta is the ratio of thermal pressure to magnetic pressure. Once the density inhomogeneities had developed to the point where gravity started to become important, self-gravity was introduced to the simulation. With no magnetic field, clouds and clumps form within the cloud with aspect ratios of around unity, whereas in the presence of a relatively strong field (beta=0.1) these become filaments, then evolve into interconnected corrugated sheets that are predominantly perpendicular to the magnetic field. With magnetic and thermal pressure equality (beta=1.0), filaments, clouds and clumps are formed. At any particular instant, the projection of the 3D structure onto a plane parallel to the magnetic field, i.e. a line of sight perpendicular to the magnetic field, resembles the appearance of filamentary molecular clouds. The filament densities, widths, velocity dispersions and temperatures resemble those observed in molecular clouds. In contrast, in the strong field case beta=0.1, projection of the 3D structure along a line of sight parallel to the magnetic field reveals a remarkably uniform structure.

astro-ph.GA↗

arXiv2016

Numerical Simulations of a Shock-Filament Interaction

We present 3D hydrodynamic adiabatic simulations of a shock interacting with a dense, elongated cloud. We compare how the nature of the interaction changes with the filament's length and its orientation to the shock, and with the shock Mach number and the density contrast of the filament. We then examine the differences with respect to 3D spherical-cloud calculations. We find significant differences in the morphology of the interaction when M=10 and chi=100: in many cases 3 parallel rolls are formed, and spread further apart with time, and periodic vortex shedding can occur off the ends of oblique filaments. Sideways-on filaments are accelerated more quickly, and initially lose mass more quickly than spherical clouds due to their greater surface area to volume ratio. However, at late stages they lose mass more slowly, due to the reduced relative speed between the filament and the postshock flow. The acceleration and mixing timescales can vary by a factor of 2 as the filament orientation changes. Oblique filaments can achieve transverse velocities up to 10% of the shock speed. Some aspects of our simulations are compared against experimental and numerical work on rigid cylinders.

astro-ph.GA↗

arXiv2016

The turbulent destruction of clouds - III. Three dimensional adiabatic shock-cloud simulations

We present 3D hydrodynamic simulations of the adiabatic interaction of a shock with a dense, spherical cloud. We compare how the nature of the interaction changes with the Mach number of the shock, $M$, and the density contrast of the cloud, $χ$. We examine the differences with 2D axisymmetric calculations, perform detailed resolution tests, and compare "inviscid" results to those obtained with the inclusion of a $k$-$ε$ subgrid turbulence model. Resolutions of 32-64 cells per cloud radius are the minimum necessary to capture the dominant dynamical processes in 3D simulations, while the 3D inviscid and $k$-$ε$ simulations typically show very good agreement. Clouds accelerate and mix up to 5 times faster when they are poorly resolved. The interaction proceeds very similarly in 2D and 3D - although non-azimuthal modes lead to different behaviour, there is very little effect on key global quantities such as the lifetime of the cloud and its acceleration. In particular, we do not find significant differences in the hollowing or "voiding" of the cloud between 2D and 3D simulations with $M=10$ and $χ=10$, which contradicts previous work in the literature.

astro-ph.GA↗

arXiv2014

Numerical Simulations of a Shock Interacting with Multiple Magnetized Clouds

We present 2D adiabatic magnetohydrodynamic (MHD) simulations of a shock interacting with groups of two or three cylindrical clouds. We study how the presence of a nearby cloud influences the dynamics of this interaction, and explore the resulting differences and similarities in the evolution of each cloud. The understanding gained from this small-scale study will help to interpret the behaviour of systems with many 10's or 100's of clouds. We observe a wide variety of behaviour in the interactions studied, which is dependent on the initial positions of the clouds and the orientation and strength of the magnetic field. We find: i) some clouds are stretched along their field-lines, whereas others are confined by their field-lines; ii) upstream clouds may accelerate past downstream clouds (though magnetic tension can prevent this); iii) clouds may also change their relative positions transverse to the direction of shock propagation as they "slingshot" past each other; iv) downstream clouds may be offered some protection from the oncoming flow as a result of being in the lee of an upstream cloud; v) the cycle of cloud compression and re-expansion is generally weaker when there are nearby neighbouring clouds; vi) the plasma $β$ in cloud material can vary rapidly as clouds collide with one another, but low values of $β$ are always transitory. This work is relevant to studies of multi-phase regions, where fast, low-density gas interacts with dense clouds, such as in circumstellar bubbles, supernova remnants, superbubbles and galactic winds.

astro-ph.GA↗

arXiv2014

The 2.35 year itch of Cygnus OB2#9 III. X-ray and radio emission analysis based on three dimensional hydrodynamical modelling

X-ray and radio data recently acquired as part of a project to study Cyg OB2#9 are used to constrain physical models of the binary system, providing in-depth knowledge about the wind-wind collision and the thermal, and non-thermal, emission arising from the shocks. We use a three-dimensional, adaptive mesh refinement simulation (including wind acceleration, radiative cooling, and the orbital motion of the stars) to model the gas dynamics of the wind-wind collision. The simulation output is used as the basis for radiative transfer calculations considering the thermal X-ray emission and the thermal/non-thermal radio emission. To obtain good agreement with the X-ray observations, our initial mass-loss rate estimates require a down-shift by a factor of roughly 7.7 to $6.5\times10^{-7}$ and $7.5\times10^{-7}$ solar mass per year for the primary and secondary star, respectively. Furthermore, the low gas densities and high shock velocities in Cyg OB2#9 are suggestive of unequal electron and ion temperatures, and the X-ray analysis indicates that an (immediately post-shock) electron-ion temperature ratio of $\simeq 0.1$ is also required. The radio emission is dominated by (non-thermal) synchrotron emission. A parameter space exploration provides evidence against models assuming equipartition between magnetic and relativistic energy densities. However, fits of comparable quality can be attained with models having stark contrasts in the ratio of magnetic-to-relativistic energy densities. The radio models also reveal a subtle effect whereby inverse Compton cooling leads to an increase in emissivity as a result of the synchrotron characteristic frequency being significantly reduced. Finally, using the results of the radio analysis, we estimate the surface magnetic field strengths to be $\approx 0.3-52\;$G. (Abridged)

astro-ph.HE↗

arXiv2014

Feedback from Winds and Supernovae in Massive Stellar Clusters - II. X-Ray Emission

The X-ray emission from a simulated massive stellar cluster is investigated. The emission is calculated from a 3D hydrodynamical model which incorporates the mechanical feedback from the stellar winds of 3 O-stars embedded in a giant molecular cloud clump containing 3240 M$_{\odot}$ of molecular material within a 4 pc radius. A simple prescription for the evolution of the stars is used, with the first supernova explosion at t=4.4 Myrs. We find that the presence of the GMC clump causes short-lived attenuation effects on the X-ray emission of the cluster. However, once most of the material has been ablated away by the winds the remaining dense clumps do not have a noticable effect on the attenuation compared with the assumed interstellar medium column. We determine the evolution of the cluster X-ray luminosity, L$_X$, and spectra, and generate synthetic images. The intrinsic X-ray luminosity drops from nearly 10$^{34}$ ergs s$^{-1}$ while the winds are `bottled up', to a near constant value of 1.7$\times 10^{32}\rm ergs s^{-1}$ between t=1-4 Myrs. L$_X$ reduces slightly during each star's red supergiant stage due to the depressurization of the hot gas. However, L$_X$ increases to $\approx 10^{34}\rm\,ergs s^{-1}$ during each star's Wolf-Rayet stage. The X-ray luminosity is enhanced by 2-3 orders of magnitude to $\sim 10^{37}\rm ergs s^{-1}$ for at least 4600 yrs after each supernova, at which time the blast wave leaves the grid and the X-ray luminosity drops. The X-ray luminosity of our simulation is generally considerably fainter than predicted from spherically-symmetric bubble models, due to the leakage of hot gas material through gaps in the outer shell. This process reduces the pressure within our simulation and thus the X-ray emission. However, the X-ray luminosities and temperatures which we obtain are comparable to similarly powerful massive young clusters.

astro-ph.SR↗

arXiv2013

Ram pressure stripping of the hot gaseous haloes of galaxies using the k-epsilon sub-grid turbulence model

We perform three dimensional hydrodynamic simulations of the ram pressure stripping of the hot extended gaseous halo of a massive galaxy using the k-epsilon sub-grid turbulence model at Mach numbers 0.9, 1.1 and 1.9. The k-epsilon model is used to simulate high Reynolds number flows by increasing the transport coefficients in regions of high turbulence. We find that the initial, instantaneous stripping is the same whether or not the k-epsilon model is implemented and is in agreement with the results of other studies. However the use of the k-epsilon model leads to five times less gas remaining after stripping by a supersonic flow has proceeded for 10 Gyr, which is more consistent with what simple analytic calculations indicate. Hence the continual Kelvin-Helmholtz stripping plays a significant role in the ram pressure stripping of the haloes of massive galaxies. To properly account for this, simulations of galaxy clusters will require the use of sub-grid turbulence models

astro-ph.CO↗

arXiv2013

Feedback from Winds and Supernovae in Massive Stellar Clusters. I: Hydrodynamics

We use 3D hydrodynamical models to investigate the effects of massive star feedback from winds and supernovae on inhomogeneous molecular material left over from the formation of a massive stellar cluster. We simulate the interaction of the mechanical energy input from a cluster with 3 O-stars into a giant molecular cloud (GMC) clump containing 3240 solar masses of molecular material within a 4 pc radius. The cluster wind blows out of the molecular clump along low-density channels, into which denser clump material is entrained. We find that the densest molecular regions are surprisingly resistant to ablation by the cluster wind, in part due to shielding by other dense regions closer to the cluster. Nonetheless, molecular material is gradually removed by the cluster wind during which mass-loading factors in excess of several 100 are obtained. Because the clump is very porous, 60-75 per cent of the injected wind energy escapes the simulation domain, with the difference being radiated. After 4.4 Myr, the massive stars in our simulation begin to explode as supernovae. The highly structured environment into which the SN energy is released allows even weaker coupling to the remaining dense material and practically all of the SN energy reaches the wider environment. The molecular material is almost completely dispersed and destroyed after 6 Myr. The escape fraction of ionizing radiation is estimated to be about 50 per cent during the first 4 Myr of the cluster's life. A similar model with a larger and more massive GMC clump reveals the same general picture, though more time is needed for it to be destroyed.

astro-ph.SR↗

arXiv2012

The 2.35 year itch of Cyg OB2 #9. II. Radio monitoring

Cyg OB2 #9 is one of a small set of non-thermal radio emitting massive O-star binaries. The non-thermal radiation is due to synchrotron emission in the colliding-wind region. Cyg OB2 #9 was only recently discovered to be a binary system and a multi-wavelength campaign was organized to study its 2011 periastron passage. We report here on the results of the radio observations obtained in this monitoring campaign. We used the Expanded Very Large Array (EVLA) radio interferometer to obtain 6 and 20 cm continuum fluxes. The observed radio light curve shows a steep drop in flux sometime before periastron. The fluxes drop to a level that is comparable to the expected free-free emission from the stellar winds, suggesting that the non-thermal emitting region is completely hidden at that time. After periastron passage, the fluxes slowly increase. We introduce a simple model to solve the radiative transfer in the stellar winds and the colliding-wind region, and thus determine the expected behaviour of the radio light curve. From the asymmetry of the light curve, we show that the primary has the stronger wind. This is somewhat unexpected if we use the astrophysical parameters based on theoretical calibrations. But it becomes entirely feasible if we take into account that a given spectral type - luminosity class combination covers a range of astrophysical parameters. The colliding-wind region also contributes to the free-free emission, which can help to explain the high values of the spectral index seen after periastron passage. Combining our data with older Very Large Array (VLA) data allows us to derive a period P = 860.0 +- 3.7 days for this system. With this period, we update the orbital parameters that were derived in the first paper of this series.

astro-ph.SR↗

arXiv2012

The 2.35 year itch of Cyg OB2 #9 - I. Optical and X-ray monitoring

Context: Nonthermal radio emission in massive stars is expected to arise in wind-wind collisions occurring inside a binary system. One such case, the O-type star Cyg OB2 #9, was proven to be a binary only four years ago, but the orbital parameters remained uncertain. The periastron passage of 2011 was the first one to be observable under good conditions since the discovery of binarity. Aims: In this context, we have organized a large monitoring campaign to refine the orbital solution and to study the wind-wind collision. Methods: This paper presents the analysis of optical spectroscopic data, as well as of a dedicated X-ray monitoring performed with Swift and XMM. Results: In light of our refined orbital solution, Cyg OB2 #9 appears as a massive O+O binary with a long period and high eccentricity; its components (O5-5.5I for the primary and O3-4III for the secondary) have similar masses and similar luminosities. The new data also provide the first evidence that a wind-wind collision is present in the system. In the optical domain, the broad Ha line varies, displaying enhanced absorption and emission components at periastron. X-ray observations yield the unambiguous signature of an adiabatic collision because, as the stars approach periastron, the X-ray luminosity closely follows the 1/D variation expected in that case. The X-ray spectrum appears, however, slightly softer at periastron, which is probably related to winds colliding at slightly lower speeds at that time. Conclusions: It is the first time that such a variation has been detected in O+O systems, and the first case where the wind-wind collision is found to remain adiabatic even at periastron passage.

astro-ph.SR↗

arXiv2012

Numerical simulations of shocks encountering clumpy regions

We present numerical simulations of the adiabatic interaction of a shock with a clumpy region containing many individual clouds. Our work incorporates a sub-grid turbulence model which for the first time makes this investigation feasible. We vary the Mach number of the shock, the density contrast of the clouds, and the ratio of total cloud mass to inter-cloud mass within the clumpy region. Cloud material becomes incorporated into the flow. This "mass-loading" reduces the Mach number of the shock, and leads to the formation of a dense shell. In cases in which the mass-loading is sufficient the flow slows enough that the shock degenerates into a wave. The interaction evolves through up to four stages: initially the shock decelerates; then its speed is nearly constant; next the shock accelerates as it leaves the clumpy region; finally it moves at a constant speed close to its initial speed. Turbulence is generated in the post-shock flow as the shock sweeps through the clumpy region. Clouds exposed to turbulence can be destroyed more rapidly than a similar cloud in an "isolated" environment. The lifetime of a downstream cloud decreases with increasing cloud-to-intercloud mass ratio. We briefly discuss the significance of these results for starburst superwinds and galaxy evolution.

astro-ph.GA↗

arXiv2011

Cosmic Rays and Radiative Instabilities

In the absence of magnetic fields and cosmic rays, radiative cooling laws with a range of dependences on temperature affect the stability of interstellar gas. For about four and a half decades, astrophysicists have recognised the importance of the thermal instablity for the formation of clouds in the interstellar medium. Even in the past several years, many papers have concerned the role of the thermal instability in the production of molecular clouds. About three and a half decades ago, astrophysicists investigating radiative shocks noticed that for many cooling laws such shocks are unstable. Attempts to address the effects of cosmic rays on the stablity of radiative media that are initially uniform or that have just passed through shocks have been made. The simplest approach to such studies involves the assumption that the cosmic rays behave as a fluid. Work based on such an approach is described. Cosmic rays have no effect on the stability of initially uniform, static media with respect to isobaric perturbations, though they do affect the stability of such media with respect to isentropic perturbations. The effect of cosmic rays on the stability of radiative shocked media depends greatly on the efficiency of the conversion of energy in accelerated cosmic rays into thermal energy in the thermalized fluid. If that efficiency is low, radiative cooling makes weak shocks propagating into upstream media with low cosmic-ray pressures more likely to be cosmic-ray dominated than adiabatic shocks of comparable strength. The cosmic-ray dominated shocks do not display radiative overstability. Highly efficient conversion of cosmic-ray energy into thermal energy leads shocked media to behave as they do when cosmic rays are absent.

astro-ph.GA↗

arXiv2011

X-ray emission from the double-binary OB-star system QZ Car (HD 93206)

X-ray observations of the double-binary OB-star system QZ Car (HD 93206) obtained with the Chandra X-ray Observatory over a period of roughly 2 years are presented. The orbit of systems A (O9.7 I+b2 v, PA = 21 d) and B (O8 III+o9 v, PB = 6 d) are reasonably well sampled by the observations, allowing the origin of the X-ray emission to be examined in detail. The X-ray spectra can be well fitted by an attenuated three temperature thermal plasma model, characterised by cool, moderate, and hot plasma components at kT ~ 0.2, 0.7, and 2 keV, respectively, and a circumstellar absorption of ~ 0.2 x 10^22 cm-2. Although the hot plasma component could be indicating the presence of wind-wind collision shocks in the system, the model fluxes calculated from spectral fits, with an average value of ~ 7 x 10^-13 erg s-1 cm-2, do not show a clear correlation with the orbits of the two constituent binaries. A semi-analytical model of QZ Car reveals that a stable momentum balance may not be established in either system A or B. Yet, despite this, system B is expected to produce an observed X-ray flux well in excess of the observations. If one considers the wind of the O8 III star to be disrupted by mass transfer the model and observations are in far better agreement, which lends support to the previous suggestion of mass-transfer in the O8 III + o9 v binary. We conclude that the X-ray emission from QZ Car can be reasonably well accounted for by a combination of contributions mainly from the single stars and the mutual wind-wind collision between systems A and B.

astro-ph.HE↗