arXiv subjects

J. Martignac

Publications and source records attributed to J. Martignac.

14 recordsLinked to original sources

arXiv2025

Very High Precision Astrometry for Exoplanets and Dark Matter with the Habitable Worlds Observatory

Astrometry, one of the oldest branches of astronomy, has been revolutionized by missions like Hipparcos and especially Gaia, which mapped billions of stars with extraordinary precision. However, challenges such as detecting Earth-like exoplanets in nearby habitable zones and probing the influence of dark matter in galactic environments require sub-microarcsecond accuracy. With a 6--8 meter large-aperture telescope operating across at visible wavelengths, the Habitable Worlds Observatory by NASA can combine astrometry and direct imaging to detect rocky exoplanets within 10 parsecs and study their atmospheres. We consider here the scientific requirements and present a concept for a dedicated astrometric instrument on HWO. It is capable to produce diffraction-limited images of large fields, achieving a point-spread function (PSF) precision of 20 milliarcseconds. Equipped with a detector calibration system, HWO can perform high precision astrometry, and, detect and measure the orbit of Earth-mass planets in the habitable zone of Nearby Solar-type stars. HWO can dramatically improve current constraints on the self- interaction cross-section of heavy dark matter particles (WIMPs) and on the masses of ultra-high dark matter particles, through the study of stellar motions in galactic environments. The visible channel of the instrument features a large CMOS-based focal plane with stitched pixel arrays, enabling a large field of view. The ``Detector Calibration Unit'' system uses interferometric laser fringes to calibrate pixel positions. Using differential astrometry and pointed observations with a stable telescope design enables extended integration times, enhancing sensitivity to sub-microarcsecond precision for detecting exoplanets and studying dark matter through stellar motion.

astro-ph.IM↗

arXiv2024

Euclid. II. The VIS Instrument

This paper presents the specification, design, and development of the Visible Camera (VIS) on the ESA Euclid mission. VIS is a large optical-band imager with a field of view of 0.54 deg^2 sampled at 0.1" with an array of 609 Megapixels and spatial resolution of 0.18". It will be used to survey approximately 14,000 deg^2 of extragalactic sky to measure the distortion of galaxies in the redshift range z=0.1-1.5 resulting from weak gravitational lensing, one of the two principal cosmology probes of Euclid. With photometric redshifts, the distribution of dark matter can be mapped in three dimensions, and, from how this has changed with look-back time, the nature of dark energy and theories of gravity can be constrained. The entire VIS focal plane will be transmitted to provide the largest images of the Universe from space to date, reaching m_AB>24.5 with S/N >10 in a single broad I_E~(r+i+z) band over a six year survey. The particularly challenging aspects of the instrument are the control and calibration of observational biases, which lead to stringent performance requirements and calibration regimes. With its combination of spatial resolution, calibration knowledge, depth, and area covering most of the extra-Galactic sky, VIS will also provide a legacy data set for many other fields. This paper discusses the rationale behind the VIS concept and describes the instrument design and development before reporting the pre-launch performance derived from ground calibrations and brief results from the in-orbit commissioning. VIS should reach fainter than m_AB=25 with S/N>10 for galaxies of full-width half-maximum of 0.3" in a 1.3" diameter aperture over the Wide Survey, and m_AB>26.4 for a Deep Survey that will cover more than 50 deg^2. The paper also describes how VIS works with the other Euclid components of survey, telescope, and science data processing to extract the cosmological information.

astro-ph.IM↗

arXiv2021

Probing the structure of a massive filament: ArTeMiS 350 and 450 micron mapping of the integral-shaped filament in Orion A

(abridged) Within the Orion A molecular cloud, the integral-shaped filament (ISF) is a prominent, degree-long structure of dense gas and dust, with clear signs of recent and on-going high-mass star formation. We used the ArTeMiS bolometer camera at APEX to map a 0.6x0.2 deg^2 region covering OMC-1, OMC-2, OMC-3 at 350 and 450 micron. We combined these data with Herschel-SPIRE maps to recover extended emission. The combined Herschel-ArTeMiS maps provide details on the distribution of dense, cold material, with a high spatial dynamic range, from our 8'' resolution (0.016 pc) up to the size of the map ~10-15 deg. By combining Herschel and ArTeMiS data at 160, 250, 350 and 450 micron, we constructed high-resolution temperature and H2 column density maps. We extracted radial profiles from the column density map in several, representative portions of the ISF, that we fitted with Gaussian and Plummer models to derive their intrinsic widths. We also compared the distribution of material traced by ArTeMiS with that seen in the higher density tracer N2H+(1-0) recently observed with the ALMA interferometer. All the radial profiles that we extracted show clear deviation from a Gaussian, with evidence for an inner plateau, previously not seen using Herschel-only data. We measure intrinsic half-power widths in the range 0.06 to 0.11 pc. This is significantly larger than the Gaussian widths measured for fibers seen in N2H+, which probably traces only the dense innermost regions of the large-scale filament. These half-power widths are within a factor of two of the value of 0.1 pc found for a large sample of nearby filaments in various low-mass star-forming regions, which tends to indicate that the physical conditions governing the fragmentation of prestellar cores within transcritical or supercritical filaments are the same over a large range of masses per unit length.

astro-ph.GA↗

arXiv2016

VIS: the visible imager for Euclid

Euclid-VIS is the large format visible imager for the ESA Euclid space mission in their Cosmic Vision program, scheduled for launch in 2020. Together with the near infrared imaging within the NISP instrument, it forms the basis of the weak lensing measurements of Euclid. VIS will image in a single r+i+z band from 550-900 nm over a field of view of ~0.5 deg2. By combining 4 exposures with a total of 2260 sec, VIS will reach to deeper than mAB=24.5 (10sigma) for sources with extent ~0.3 arcsec. The image sampling is 0.1 arcsec. VIS will provide deep imaging with a tightly controlled and stable point spread function (PSF) over a wide survey area of 15000 deg2 to measure the cosmic shear from nearly 1.5 billion galaxies to high levels of accuracy, from which the cosmological parameters will be measured. In addition, VIS will also provide a legacy dataset with an unprecedented combination of spatial resolution, depth and area covering most of the extra-Galactic sky. Here we will present the results of the study carried out by the Euclid Consortium during the period up to the Critical Design Review.

astro-ph.IM↗

arXiv2016

Characterizing filaments in regions of high-mass star formation: High-resolution submilimeter imaging of the massive star-forming complex NGC 6334 with ArTéMiS

Herschel observations of nearby molecular clouds suggest that interstellar filaments and prestellar cores represent two fundamental steps in the star formation process. The observations support a picture of low-mass star formation according to which ~ 0.1 pc-wide filaments form first in the cold interstellar medium, probably as a result of large-scale compression of interstellar matter by supersonic turbulent flows, and then prestellar cores arise from gravitational fragmentation of the densest filaments. Whether this scenario also applies to regions of high-mass star formation is an open question, in part because Herschel data cannot resolve the inner width of filaments in the nearest regions of massive star formation. We used the bolometer camera ArTeMiS on the APEX telescope to map the central part of the NGC6334 complex at a factor of > 3 higher resolution than Herschel at 350 microns. Combining ArTeMiS data with Herschel data allowed us to study the structure of the main filament of the complex with a resolution of 8" or < 0.07 pc at d ~ 1.7 kpc. Our study confirms that this filament is a very dense, massive linear structure with a line mass ranging from ~ 500 Msun/pc to ~ 2000 Msun/pc over nearly 10 pc. It also demonstrates that its inner width remains as narrow as W ~ 0.15 +- 0.05 pc all along the filament length, within a factor of < 2 of the characteristic 0.1 pc value found with Herschel for lower-mass filaments in the Gould Belt. While it is not completely clear whether the NGC 6334 filament will form massive stars or not in the future, it is two to three orders of magnitude denser than the majority of filaments observed in Gould Belt clouds, and yet has a very similar inner width. This points to a common physical mechanism for setting the filament width and suggests that some important structural properties of nearby clouds also hold in high-mass star forming regions.

astro-ph.GA↗

arXiv2012

Resolving the Vela C ridge with P-ArTeMiS and Herschel

We present APEX/P-ArTéMiS 450μm continuum observations of RCW 36 and the adjacent ridge, a high-mass high-column density filamentary structure at the centre of the Vela C molecular cloud. These observations, at higher resolution than Herschel's SPIRE camera, reveal clear fragmentation of the central star-forming ridge. Combined with PACS far-infrared and SPIRE sub-millimetre observations from the Herschel HOBYS project we build a high resolution column density map of the region mapped with P-ArTéMiS. We extract the radial density profile of the Vela C ridge which with a ~ 0.1pc central width is consistent with that measured for low-mass star-forming filaments in the Herschel Gould Belt survey. Direct comparison with Serpens South, of the Gould Belt Aquila complex, reveals many similarities between the two regions. Despite likely different formation mechanisms and histories, the Vela C ridge and Serpens South filament share common characteristics, including their filament central widths.

astro-ph.SR↗

arXiv2012

VIS: the visible imager for Euclid

Euclid-VIS is a large format visible imager for the ESA Euclid space mission in their Cosmic Vision program, scheduled for launch in 2019. Together with the near infrared imaging within the NISP instrument it forms the basis of the weak lensing measurements of Euclid. VIS will image in a single r+i+z band from 550-900 nm over a field of view of ~0.5 deg2. By combining 4 exposures with a total of 2240 sec, VIS will reach to V=24.5 (10σ) for sources with extent ~0.3 arcsec. The image sampling is 0.1 arcsec. VIS will provide deep imaging with a tightly controlled and stable point spread function (PSF) over a wide survey area of 15000 deg2 to measure the cosmic shear from nearly 1.5 billion galaxies to high levels of accuracy, from which the cosmological parameters will be measured. In addition, VIS will also provide a legacy imaging dataset with an unprecedented combination of spatial resolution, depth and area covering most of the extra-Galactic sky. Here we will present the results of the study carried out by the Euclid Consortium during the Euclid Definition phase.

astro-ph.IM↗

arXiv2011

Euclid Definition Study Report

Euclid is a space-based survey mission from the European Space Agency designed to understand the origin of the Universe's accelerating expansion. It will use cosmological probes to investigate the nature of dark energy, dark matter and gravity by tracking their observational signatures on the geometry of the universe and on the cosmic history of structure formation. The mission is optimised for two independent primary cosmological probes: Weak gravitational Lensing (WL) and Baryonic Acoustic Oscillations (BAO). The Euclid payload consists of a 1.2 m Korsch telescope designed to provide a large field of view. It carries two instruments with a common field-of-view of ~0.54 deg2: the visual imager (VIS) and the near infrared instrument (NISP) which contains a slitless spectrometer and a three bands photometer. The Euclid wide survey will cover 15,000 deg2 of the extragalactic sky and is complemented by two 20 deg2 deep fields. For WL, Euclid measures the shapes of 30-40 resolved galaxies per arcmin2 in one broad visible R+I+Z band (550-920 nm). The photometric redshifts for these galaxies reach a precision of dz/(1+z) < 0.05. They are derived from three additional Euclid NIR bands (Y, J, H in the range 0.92-2.0 micron), complemented by ground based photometry in visible bands derived from public data or through engaged collaborations. The BAO are determined from a spectroscopic survey with a redshift accuracy dz/(1+z) =0.001. The slitless spectrometer, with spectral resolution ~250, predominantly detects Ha emission line galaxies. Euclid is a Medium Class mission of the ESA Cosmic Vision 2015-2025 programme, with a foreseen launch date in 2019. This report (also known as the Euclid Red Book) describes the outcome of the Phase A study.

astro-ph.CO↗

arXiv2011

The COSPIX mission: focusing on the energetic and obscured Universe

Tracing the formation and evolution of all supermassive black holes, including the obscured ones, understanding how black holes influence their surroundings and how matter behaves under extreme conditions, are recognized as key science objectives to be addressed by the next generation of instruments. These are the main goals of the COSPIX proposal, made to ESA in December 2010 in the context of its call for selection of the M3 mission. In addition, COSPIX, will also provide key measurements on the non thermal Universe, particularly in relation to the question of the acceleration of particles, as well as on many other fundamental questions as for example the energetic particle content of clusters of galaxies. COSPIX is proposed as an observatory operating from 0.3 to more than 100 keV. The payload features a single long focal length focusing telescope offering an effective area close to ten times larger than any scheduled focusing mission at 30 keV, an angular resolution better than 20 arcseconds in hard X-rays, and polarimetric capabilities within the same focal plane instrumentation. In this paper, we describe the science objectives of the mission, its baseline design, and its performances, as proposed to ESA.

astro-ph.IM↗

arXiv2010

The Photodetector Array Camera and Spectrometer (PACS) on the Herschel Space Observatory

The Photodetector Array Camera and Spectrometer (PACS) is one of the three science instruments on ESA's far infrared and submillimetre observatory. It employs two Ge:Ga photoconductor arrays (stressed and unstressed) with 16x25 pixels, each, and two filled silicon bolometer arrays with 16x32 and 32x64 pixels, respectively, to perform integral-field spectroscopy and imaging photometry in the 60-210μ m wavelength regime. In photometry mode, it simultaneously images two bands, 60-85μ m or 85-125μ\m and 125-210μ m, over a field of view of ~1.75'x3.5', with close to Nyquist beam sampling in each band. In spectroscopy mode, it images a field of 47"x47", resolved into 5x5 pixels, with an instantaneous spectral coverage of ~1500km/s and a spectral resolution of ~175km/s. We summarise the design of the instrument, describe observing modes, calibration, and data analysis methods, and present our current assessment of the in-orbit performance of the instrument based on the Performance Verification tests. PACS is fully operational, and the achieved performance is close to or better than the pre-launch predictions.

astro-ph.IM↗

arXiv2009

Evidence of triggered star formation in G327.3-0.6. Dust-continuum mapping of an infrared dark cloud with P-ArTéMiS

Aims. Expanding HII regions and propagating shocks are common in the environment of young high-mass star-forming complexes. They can compress a pre-existing molecular cloud and trigger the formation of dense cores. We investigate whether these phenomena can explain the formation of high-mass protostars within an infrared dark cloud located at the position of G327.3-0.6 in the Galactic plane, in between two large infrared bubbles and two HII regions. Methods: The region of G327.3-0.6 was imaged at 450 ? m with the CEA P-ArTéMiS bolometer array on the Atacama Pathfinder EXperiment telescope in Chile. APEX/LABOCA and APEX-2A, and Spitzer/IRAC and MIPS archives data were used in this study. Results: Ten massive cores were detected in the P-ArTéMiS image, embedded within the infrared dark cloud seen in absorption at both 8 and 24 ?m. Their luminosities and masses indicate that they form high-mass stars. The kinematical study of the region suggests that the infrared bubbles expand toward the infrared dark cloud. Conclusions: Under the influence of expanding bubbles, star formation occurs in the infrared dark areas at the border of HII regions and infrared bubbles.

astro-ph.GA↗

arXiv2008

First 450-micron dust continuum mapping of the massive star-forming region NGC 3576 with the P-ArTeMiS bolometer camera

Context: The earliest phases of massive star formation are currently much debated. Aims. In an effort to make progress, we took a census of Class0-like protostellar dense cores in the NGC 3576 region, one of the nearest and most luminous embedded sites of high-mass star formation in the Galaxy. Methods: We used the P-ArTeMiS bolometer camera on the APEX telescope to produce the first 450-micron dust continuum map of the filamentary dense clump associated with NGC 3576. Results: Combining our 450-micron observations with existing data at other wavelengths, we have identified seven massive protostellar sources along the NGC 3576 filament and placed them in the M_env - L_bol evolutionary diagram for protostars. Conclusions: Comparison with theoretical evolutionary tracks suggests that these seven protostellar sources will evolve into massive stars with masses M* ~ 15-50 Msun. Four sources are classified as candidate high-mass Class 0 objects, two sources as massive Class I objects, and one source appears to be at an intermediate stage.

astro-ph↗

arXiv2006

Recent Achievements on the development of the Herschel/PACS Bolometer arrays

A new type of bolometer arrays sensitive in the Far Infrared and Submillimeter range has been developped and manufactured by CEA/LETI/SLIR and will be integrated in the PACS instrument onboard the Herschel Space Observatory (launch date 2008). The main innovations are their collective manufacturing technique (production of 3-side buttable 16x16 arrays) and their high mapping efficiency (large format detector and instantaneous Nyquist sampling). Their measured NEP is 2x10^-16 W/Hz^-0.5 and their thermometric passband about 4-5 Hz. In this paper we describe CEA bolometers and present the results obtained during the last test campaign.

astro-ph↗

arXiv2005

SIMBOL-X, a formation flying-mission for hard X-ray astrophysics

SIMBOL-X is a hard X-ray mission, operating in the ~ 0.5-70 keV range, which is proposed by a consortium of European laboratories in response to the 2004 call for ideas of CNES for a scientific mission to be flown on a formation flying demonstrator. Relying on two spacecrafts in a formation flying configuration, SIMBOL-X uses for the first time a ~ 30 m focal length X-ray mirror to focus X-rays with energy above 10 keV, resulting in a two orders of magnitude improvement in angular resolution and sensitivity in the hard X-ray range with respect to non focusing techniques. The SIMBOL-X revolutionary instrumental capabilities will allow to elucidate outstanding questions in high energy astrophysics, related in particular to the physics of accretion onto compact objects, to the acceleration of particles to the highest energies, and to the nature of the Cosmic X-Ray background. The mission, which has gone through a thorough assessment study performed by CNES, is expected to start a competitive phase A in autumn 2005, leading to a flight decision at the end of 2006, for a launch in 2012. The mission science objectives, the current status of the instrumentation and mission design, as well as potential trade-offs are presented in this paper.

astro-ph↗