SearcharxivSearch

arXiv subjects

J. P. Morgan

Publications and source records attributed to J. P. Morgan.

12 recordsLinked to original sources

Exploring One-Cell Inversion Method for Transient Transport on GPU

To find deterministic solutions to the transient $S_N$ neutron transport equation, iterative schemes are typically used to treat the scattering (and fission) source terms. We explore the one-cell inversion iteration scheme to do this on the GPU and make comparisons to a source iteration scheme. We examine convergence behavior, through the analysis of spectral radii, of both one-cell inversion and source iterations. To further boost the GPU parallel efficiency, we derive a higher-order discretization method, simple corner balance (in space) and multiple balance (in time), to add more work to the threads and gain accuracy. Fourier analysis on this higher-order numerical method shows that it is unconditionally stable, but it can produce negative flux alterations that are critically damped through time. We explore a whole-problem (in all angle and all cell) sparse linear algebra framework, for both iterative schemes, to quickly produce performant code for GPUs. Despite one-cell inversion requiring additional iterations to convergence, those iterations can be done faster to provide a significant speedup over source iteration in quadrature sets at or below $S_{128}$. Going forward we will produce a two-dimensional implementation of this code to experiment with memory and performance impacts of a whole-problem framework including methods of synthetic acceleration and pre-conditioners for this scheme, then we will begin making direct comparisons to traditionally implemented source iteration in production code.

physics.comp-ph

Hybrid-Delta Tracking on a Structured Mesh in MCATK

Monte Carlo Application Toolkit (MCATK) commonly uses surface tracking on a structured mesh to compute scalar fluxes. In this mode, higher fidelity requires more mesh cells and isotopes and thus more computational overhead -- since every time a particle changes cells, new cross-sections must be found for all materials in a given cell -- even if no collision occurs in that cell. We implement a hybrid version of Woodcock (delta) tracking on this imposed mesh to alleviate the number of cross-section lookups. This algorithm computes an energy-dependent microscopic majorant cross section is computed for the problem. Each time a particle enters a new cell, rather than computing a true macroscopic cross-section over all isotopes in the cell, the microscopic majorant cross-section is simply multiplied by the total number density of the cell to obtain a macroscopic majorant cross-section for the cell. Delta tracking is then performed within that single cell. This increases performance with minimal code changes, speeding up the solve time by a factor of 1.5 -- 1.75 for k-eigenvalue simulations and 1.2 -- 1.6 for fixed source simulations in a series of materially complex criticality benchmarks.

physics.comp-ph

Development of MC/DC: a performant, scalable, and portable Python-based Monte Carlo neutron transport code

We discuss the current development of MC/DC (Monte Carlo Dynamic Code). MC/DC is primarily designed to serve as an exploratory Python-based MC transport code. However, it seeks to offer improved performance, massive scalability, and backend portability by leveraging Python code-generation libraries and implementing an innovative abstraction strategy and compilation scheme. Here, we verify MC/DC capabilities and perform an initial performance assessment. We found that MC/DC can run hundreds of times faster than its pure Python mode and about 2.5 times slower, but with comparable parallel scaling, than the high-performance MC code Shift for simple problems. Finally, to further exercise MC/DC's time-dependent MC transport capabilities, we propose a challenge problem based on the C5G7-TD benchmark model.

physics.comp-ph

Muon (g-2) Technical Design Report

The Muon (g-2) Experiment, E989 at Fermilab, will measure the muon anomalous magnetic moment a factor-of-four more precisely than was done in E821 at the Brookhaven National Laboratory AGS. The E821 result appears to be greater than the Standard-Model prediction by more than three standard deviations. When combined with expected improvement in the Standard-Model hadronic contributions, E989 should be able to determine definitively whether or not the E821 result is evidence for physics beyond the Standard Model. After a review of the physics motivation and the basic technique, which will use the muon storage ring built at BNL and now relocated to Fermilab, the design of the new experiment is presented. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-2/3 approval.

physics.ins-det

Towards commissioning the Fermilab Muon G-2 Experiment

Starting this summer, Fermilab will host a key experiment dedicated to the search for signals of new physics: The Fermilab Muon g-2 Experiment. Its aim is to precisely measure the anomalous magnetic moment of the muon. In full operation, in order to avoid contamination, the newly born secondary beam is injected into a 505 m long Delivery Ring (DR) wherein it makes several revolutions before being sent to the experiment. Part of the commissioning scenario will execute a running mode wherein the passage from the DR will be skipped. With the aid of numerical simulations, we provide estimates of the expected performance.

physics.acc-ph

Generation of unstructured meshes in 2-D, 3-D, and spherical geometries with embedded high resolution sub-regions

We present 2-D, 3-D, and spherical mesh generators for the Finite Element Method (FEM) using triangular and tetrahedral elements. The mesh nodes are treated as if they were linked by virtual springs that obey Hooke's law. Given the desired length for the springs, the FEM is used to solve for the optimal nodal positions for the static equilibrium of this spring system. A 'guide-mesh' approach allows the user to create embedded high resolution sub-regions within a coarser mesh. The method converges rapidly. For example, in 3-D, the algorithm is able to refine a specific region within an unstructured tetrahedral spherical shell so that the edge-length factor $l_{0r}/l_{0c} = 1/33$ within a few iterations, where $l_{0r}$ and $l_{0c}$ are the desired spring length for elements inside the refined and coarse regions respectively. One use for this type of mesh is to model regional problems as a fine region within a global mesh that has no fictitious boundaries, at only a small additional computational cost. The algorithm also includes routines to locally improve the quality of the mesh and to avoid badly shaped 'slivers-like' tetrahedra.

cs.CG

Simulated performance of the production target for the Muon g-2 Experiment

The Muon g-2 Experiment plans to use the Fermilab Recycler Ring for forming the proton bunches that hit its production target. The proposed scheme uses one RF system, 80 kV of 2.5 MHz RF. In order to avoid bunch rotations in a mismatched bucket, the 2.5 MHz is ramped adiabatically from 3 to 80 kV in 90 ms. In this study, the interaction of the primary proton beam with the production target for the Muon g-2 Experiment is numerically examined.

physics.acc-ph

Performance analysis for the new G-2 experiment

The new g-2 experiment at Fermilab aims to measure the muon anomalous magnetic moment by a fourfold improvement in precision compared to the BNL experiment. Achieving this goal requires the delivery of highly polarized 3.094 GeV/c muons with a narrow +-0.5% Δp/p acceptance to the storage ring. In this study, we describe a muon capture and transport scheme that should meet this requirement. First, we present the conceptual design of our proposed scheme wherein we describe its basic features. Then, we detail our numerical model and present a complete end-to-end simulation of all g-2 beamlines.

physics.acc-ph

Manipulation of Magnetic Solitons on Odd-Numbered Macrospin Rings

We report simulations of a frustrated odd-numbered macrospin ring system, with full point dipolar interactions, driven by a rotating uniform applied magnetic field of constant magnitude. The system is designed with equally-spaced radially-aligned macrospins, which must carry a frustrated soliton defect in its ground state. It is shown how correctly tuning the applied field magnitude can allow for non-trivial unidirectional propagation of the soliton, the required directional pressure acquired via the curvature of the ring. Furthermore, the system, which may be employed as a multiple rotation counter, is tested for robustness against quenched disorder as would be present in an experimental realization.

cond-mat.mtrl-sci

Disorder strength and field-driven ground state domain formation in artificial spin ice: experiment, simulation and theory

Quenched disorder affects how non-equilibrium systems respond to driving. In the context of artificial spin ice, an athermal system comprised of geometrically frustrated classical Ising spins with a two-fold degenerate ground state, we give experimental and numerical evidence of how such disorder washes out edge effects, and provide an estimate of disorder strength in the experimental system. We prove analytically that a sequence of applied fields with fixed amplitude is unable to drive the system to its ground state from a saturated state. These results should be relevant for other systems where disorder does not change the nature of the ground state.

cond-mat.mes-hall

Domain dynamics and fluctuations in artificial square ice at finite temperatures

The thermally-driven formation and evolution of vertex domains is studied for square artificial spin ice. A self consistent mean field theory is used to show how domains of ground state ordering form spontaneously, and how these evolve in the presence of disorder. The role of fluctuations is studied, using Monte Carlo simulations and analytical modelling. Domain wall dynamics are shown to be driven by a biasing of random fluctuations towards processes that shrink closed domains, and fluctuations within domains are shown to generate isolated small excitations, which may stabilise as the effective temperature is lowered. Domain dynamics and fluctuations are determined by interaction strengths, which are controlled by inter-element spacing. The role of interaction strength is studied via experiments and Monte Carlo simulations. Our mean field model is applicable to ferroelectric `spin' ice, and we show that features similar to that of magnetic spin ice can be expected, but with different characteristic temperatures and rates.

cond-mat.stat-mech

Resolvable designs with large blocks

Resolvable designs with two blocks per replicate are studied from an optimality perspective. Because in practice the number of replicates is typically less than the number of treatments, arguments can be based on the dual of the information matrix and consequently given in terms of block concurrences. Equalizing block concurrences for given block sizes is often, but not always, the best strategy. Sufficient conditions are established for various strong optimalities and a detailed study of E-optimality is offered, including a characterization of the E-optimal class. Optimal designs are found to correspond to balanced arrays and an affine-like generalization.

math.ST