arXiv subjects

J. Palomo

Publications and source records attributed to J. Palomo.

10 recordsLinked to original sources

arXiv2024

Tunable Generation of Spatial Entanglement in Nonlinear Waveguide Arrays

Harnessing high-dimensional entangled states of light presents a frontier for advancing quantum information technologies, from fundamental tests of quantum mechanics to enhanced computation and communication protocols. In this context, the spatial degree of freedom stands out as particularly suited for on-chip integration. But while traditional demonstrations produce and manipulate path-entangled states sequentially with discrete optical elements, continuously-coupled nonlinear waveguide systems offer a promising alternative where photons can be generated and interfere along the entire propagation length, unveiling novel capabilities within a reduced footprint. Here we exploit this concept to implement a compact and reconfigurable source of path-entangled photon pairs based on parametric down-conversion in semiconductor nonlinear waveguides arrays. We use a double-pump configuration to engineer the output quantum state and implement various types of spatial correlations, exploiting a quantum interference effect between the biphoton state generated in each pumped waveguide. This demonstration, at room temperature and telecom wavelength, illustrates the potential of continuously-coupled systems as a promising alternative to discrete multi-component quantum circuits for leveraging the high-dimensional spatial degree of freedom of photons.

quant-ph↗

arXiv2023

Spectral signature of high-order photon processes enhanced by Cooper-pair pairing

Inducing interactions between individual photons is key for photonic quantum information and studying many-body photon states. Superconducting circuits are well suited to combine strong interactions with low losses. Typically, microwave photons are stored in an $LC$ oscillator shunted by a Josephson junction, where the zero-point phase fluctuations across the junction determine the strength and order of photon interactions. Most superconducting nonlinear oscillators operate with small phase fluctuations, where two-photon Kerr interactions dominate. In our experiment, we shunt a high-impedance $LC$ oscillator with a dipole element favoring the tunneling of paired Cooper pairs. This leads to large phase fluctuations of 3.4, accessing a regime where transition frequencies shift non-monotonically with excitation number. From spectroscopy, we extract two-, three-, and four-photon interaction energies, all of similar strength and exceeding the photon loss rate. Our results open a new regime of high-order photon interactions in microwave quantum optics.

quant-ph↗

arXiv2023

High-sensitivity AC-charge detection with a MHz-frequency fluxonium qubit

Owing to their strong dipole moment and long coherence times, superconducting qubits have demonstrated remarkable success in hybrid quantum circuits. However, most qubit architectures are limited to the GHz frequency range, severely constraining the class of systems they can interact with. The fluxonium qubit, on the other hand, can be biased to very low frequency while being manipulated and read out with standard microwave techniques. Here, we design and operate a heavy fluxonium with an unprecedentedly low transition frequency of $1.8~\mathrm{MHz}$. We demonstrate resolved sideband cooling of the ``hot'' qubit transition with a final ground state population of $97.7~\%$, corresponding to an effective temperature of $23~μ\mathrm{K}$. We further demonstrate coherent manipulation with coherence times $T_1=34~μ\mathrm{s}$, $T_2^*=39~μ\mathrm{s}$, and single-shot readout of the qubit state. Importantly, by directly addressing the qubit transition with a capacitively coupled waveguide, we showcase its high sensitivity to a radio-frequency field. Through cyclic qubit preparation and interrogation, we transform this low-frequency fluxonium qubit into a frequency-resolved charge sensor. This method results in a charge sensitivity of $33~μ\mathrm{e}/\sqrt{\mathrm{Hz}}$, or an energy sensitivity (in joules per hertz) of $2.8~\hbar$. This method rivals state-of-the-art transport-based devices, while maintaining inherent insensitivity to DC charge noise. The high charge sensitivity combined with large capacitive shunt unlocks new avenues for exploring quantum phenomena in the $1-10~\mathrm{MHz}$ range, such as the strong-coupling regime with a resonant macroscopic mechanical resonator.

quant-ph↗

arXiv2022

One hundred second bit-flip time in a two-photon dissipative oscillator

Current implementations of quantum bits (qubits) continue to undergo too many errors to be scaled into useful quantum machines. An emerging strategy is to encode quantum information in the two meta-stable pointer states of an oscillator exchanging pairs of photons with its environment, a mechanism shown to provide stability without inducing decoherence. Adding photons in these states increases their separation, and macroscopic bit-flip times are expected even for a handful of photons, a range suitable to implement a qubit. However, previous experimental realizations have saturated in the millisecond range. In this work, we aim for the maximum bit-flip time we could achieve in a two-photon dissipative oscillator. To this end, we design a Josephson circuit in a regime that circumvents all suspected dynamical instabilities, and employ a minimally invasive fluorescence detection tool, at the cost of a two-photon exchange rate dominated by single-photon loss. We attain bit-flip times of the order of 100 seconds for states pinned by two-photon dissipation and containing about 40 photons. This experiment lays a solid foundation from which the two-photon exchange rate can be gradually increased, thus gaining access to the preparation and measurement of quantum superposition states, and pursuing the route towards a logical qubit with built-in bit-flip protection.

quant-ph↗

arXiv2022

Magnifying quantum phase fluctuations with Cooper-pair pairing

Remarkably, complex assemblies of superconducting wires, electrodes, and Josephson junctions are compactly described by a handful of collective phase degrees of freedom that behave like quantum particles in a potential. The inductive wires contribute a parabolic confinement, while the tunnel junctions add a cosinusoidal corrugation. Usually, the ground state wavefunction is localized within a single potential well -- that is, quantum phase fluctuations are small -- although entering the regime of delocalization holds promise for metrology and qubit protection. A direct route is to loosen the inductive confinement and let the ground state phase spread over multiple Josephson periods, but this requires a circuit impedance vastly exceeding the resistance quantum and constitutes an ongoing experimental challenge. Here we take a complementary approach and fabricate a generalized Josephson element that can be tuned in situ between one- and two-Cooper-pair tunneling, doubling the frequency of the corrugation and thereby magnifying the number of wells probed by the ground state. We measure a tenfold suppression of flux sensitivity of the first transition energy, implying a twofold increase in the vacuum phase fluctuations.

quant-ph↗

arXiv2022

Dielectric permittivity, conductivity and breakdown field of hexagonal boron nitride

In view of the extensive use of hexagonal boron nitride (hBN) in 2D material electronics, it becomes important to refine its dielectric characterization in terms of low-field permittivity and high-field strength and conductivity up to the breakdown voltage. The present study aims at filling this gap using DC and RF transport in two Au-hBN-Au capacitor series of variable thickness in the 10--100 nm range, made of large high-pressure, high-temperature (HPHT) crystals and a polymer derivative ceramics (PDC) crystals. We deduce an out-of-plane low field dielectric constant $ε_\parallel=3.4\pm0.2$ consistent with the theoretical prediction of Ohba et al., that narrows down the generally accepted window $ε_\parallel=3$--$4$. The DC-current leakage at high-field is found to obey the Frenkel-Pool law for thermally-activated trap-assisted electron transport with a dynamic dielectric constant $ε_\parallel\simeq3.1$ and a trap energy $Φ_B\simeq1.3\;\mathrm{eV}$, that is comparable with standard technologically relevant dielectrics.

cond-mat.mtrl-sci↗

arXiv2020

Edge mode engineering for optimal ultracoherent silicon nitride membranes

Due to their high force sensitivity, mechanical resonators combining low mechanical dissipation with a small motional mass are highly demanded in fields as diverse as resonant force imaging, mass sensing, or cavity optomechanics. "Soft-clamping" is a phononic engineering technique by which mechanical modes of highly-stressed membranes or strings are localized away from lossy regions, thereby enabling ultrahigh-Q for ng-scale devices. Here, we report on parasitic modes arising from the finite size of the structure which can significantly degrade the performance of these membranes. Through interferometric measurements and finite-element simulations, we show that these parasitic modes can hybridize with the localized modes of our structures, reducing the quality factors by up to one order of magnitude. To circumvent this problem, we engineer the spectral profile of the parasitic modes in order to avoid their overlap with the high-Q defect mode. We verify via a statistical analysis that this modal engineering reproducibly yields higher quality factors in fabricated devices, consistent with theoretically predicted values.

physics.app-ph↗

arXiv2018

RF-quantum capacitance of the topological insulator Bi2Se3 in the bulk depleted regime for field-effect transistors

A Metal-dielectric-topological insulator capacitor device based on hBN-encapsulated CVD grown Bi2Se3 is realized and investigated in the radio frequency regime. The RF quantum capacitance and device resistance are extracted for frequencies as a high as 10 GHz, and studied as a function of the applied gate voltage. The combination of the superior quality hBN dielectric gate with the optimized transport characteristics of CVD grown Bi2Se3 (n~10^18cm-3 in 8 nm) allow us to attain a bulk depleted regime by dielectric gating. A quantum capacitance minimum is observed revealing a purely Dirac regime, where the Dirac surface state in proximity to the gate reaches charge neutrality, but the bottom surface Dirac cone remains charged, and couples capacitively to the top surface via the insulating bulk. Our work paves the way towards implementation of topological materials in RF devices.

cond-mat.mes-hall↗

arXiv2014

Stamping single wall nanotubes for circuit quantum electrodynamics

We report on a dry transfer technique for single wall carbon nanotube devices which allows to embed them in high finesse microwave cavity. We demonstrate the ground state charge readout and a quality factor of about 3000 down to the single photon regime. This technique allows to make devices such as double quantum dots which could be instrumental for achieving the strong spin photon coupling. It can easily be extended to generic carbon nanotube based microwave devices.

cond-mat.mes-hall↗

arXiv2007

Computer model validation with functional output

A key question in evaluation of computer models is Does the computer model adequately represent reality? A six-step process for computer model validation is set out in Bayarri et al. [Technometrics 49 (2007) 138--154] (and briefly summarized below), based on comparison of computer model runs with field data of the process being modeled. The methodology is particularly suited to treating the major issues associated with the validation process: quantifying multiple sources of error and uncertainty in computer models; combining multiple sources of information; and being able to adapt to different, but related scenarios. Two complications that frequently arise in practice are the need to deal with highly irregular functional data and the need to acknowledge and incorporate uncertainty in the inputs. We develop methodology to deal with both complications. A key part of the approach utilizes a wavelet representation of the functional data, applies a hierarchical version of the scalar validation methodology to the wavelet coefficients, and transforms back, to ultimately compare computer model output with field output. The generality of the methodology is only limited by the capability of a combination of computational tools and the appropriateness of decompositions of the sort (wavelets) employed here. The methods and analyses we present are illustrated with a test bed dynamic stress analysis for a particular engineering system.

stat.ME↗