arXiv subjects

J. Piqueras

Publications and source records attributed to J. Piqueras.

6 recordsLinked to original sources

arXiv2025

TuMag: the tunable magnetograph for the Sunrise III mission

One of the instruments aboard the Sunrise III mission, the Tunable Magnetograph (TuMag), is a tunable imaging spectropolarimeter in visible wavelengths. It is designed to probe the vector magnetic field and the line-of-sight velocity of the photosphere and the lower chromosphere. The quasi-simultaneous observation of two spectral lines provides excellent diagnostic measurements of the magnetic and dynamic coupling in these layers. The key technologies employed for TuMag are an LCVR-based polarimeter and a solid, LiNbO3 Fabry-Pérot etalon as a spectrometer. However, it also incorporates several innovative features, such as home-made high-sensitivity scientific cameras and a double filter wheel. TuMag can sequentially observe any two out of the three spectral lines of Fe I at 525.02 and 525.06 nm and of Mg I at 517.3 nm. Laboratory measurements have demonstrated outstanding performance, including a wavefront root-mean-square error better than λ/13 for image quality, a full-width-at-half-maximum of 8.7 pm for the filtergraph transmission profile, and polarimetric efficiencies > 0.54. Here we report on the concept, design, calibration, and integration phases of the instrument, as well as on the data reduction pipeline.

astro-ph.IM↗

arXiv2021

Light guiding and optical resonances in ZnS microstructures doped with Ga or In

The high refractive index of ZnS (about 2.4 in the visible range) makes ZnS microstructures good candidates for the fabrication of light guides and resonant microcavities. Light guiding behaviour has been studied in several ZnS structures. In particular, in this work the behavior of rods and plates has been investigated and it is has been shown that the morphology of the studied structures plays a determinant role on the supported resonant modes. In ZnS:Ga and ZnS:In structures investigated in the present work Fabry-Perot as well as Whispering Gallery resonant modes are supported. A good agreement has been found between the experimental results and the theoretical model used to describe both types of resonances, which have been used to estimate the refractive index of the doped material. In ZnS:Ga wires with triangular cross-section a lasing effect has been observed in the blue-green range. To our knowledge, it is the first time that resonant modes in visible region have been studied in doped ZnS.

physics.optics↗

arXiv2011

Lucky Imaging Adaptive Optics of the brown dwarf binary GJ569Bab

The potential of combining Adaptive Optics (AO) and Lucky Imaging (LI) to achieve high precision astrometry and differential photometry in the optical is investigated by conducting observations of the close 0\farcs1 brown dwarf binary GJ569Bab. We took 50000 $I$-band images with our LI instrument FastCam attached to NAOMI, the 4.2-m William Herschel Telescope (WHT) AO facility. In order to extract the most of the astrometry and photometry of the GJ569Bab system we have resorted to a PSF fitting technique using the primary star GJ569A as a suitable PSF reference which exhibits an $I$-band magnitude of $7.78\pm0.03$. The AO+LI observations at WHT were able to resolve the binary system GJ569Bab located at $4\farcs 92 \pm 0\farcs05$ from GJ569A. We measure a separation of $98.4 \pm 1.1$ mas and $I$-band magnitudes of $13.86 \pm 0.03$ and $14.48 \pm 0.03$ and $I-J$ colors of 2.72$\pm$0.08 and 2.83$\pm$0.08 for the Ba and Bb components, respectively. Our study rules out the presence of any other companion to GJ569A down to magnitude I$\sim$ 17 at distances larger than 1\arcsec. The $I-J$ colors measured are consistent with M8.5-M9 spectral types for the Ba and Bb components. The available dynamical, photometric and spectroscopic data are consistent with a binary system with Ba being slightly (10-20%) more massive than Bb. We obtain new orbital parameters which are in good agreement with those in the literature.

astro-ph.IM↗

arXiv2010

High contrast optical imaging of companions: the case of the brown dwarf binary HD-130948BC

High contrast imaging at optical wavelengths is limited by the modest correction of conventional near-IR optimized AO systems.We take advantage of new fast and low-readout-noise detectors to explore the potential of fast imaging coupled to post-processing techniques to detect faint companions to stars at small separations. We have focused on I-band direct imaging of the previously detected brown dwarf binary HD130948BC,attempting to spatially resolve the L2+L2 benchmark system. We used the Lucky-Imaging instrument FastCam at the 2.5-m Nordic Telescope to obtain quasi diffraction-limited images of HD130948 with ~0.1" resolution.In order to improve the detectability of the faint binary in the vicinity of a bright (I=5.19 \pm 0.03) solar-type star,we implemented a post-processing technique based on wavelet transform filtering of the image which allows us to strongly enhance the presence of point-like sources in regions where the primary halo dominates. We detect for the first time the BD binary HD130948BC in the optical band I with a SNR~9 at 2.561"\pm 0.007" (46.5 AU) from HD130948A and confirm in two independent dataset that the object is real,as opposed to time-varying residual speckles.We do not resolve the binary, which can be explained by astrometric results posterior to our observations that predict a separation below the NOT resolution.We reach at this distance a contrast of dI = 11.30 \pm 0.11, and estimate a combined magnitude for this binary to I = 16.49 \pm 0.11 and a I-J colour 3.29 \pm 0.13. At 1", we reach a detectability 10.5 mag fainter than the primary after image post-processing. We obtain on-sky validation of a technique based on speckle imaging and wavelet-transform processing,which improves the high contrast capabilities of speckle imaging.The I-J colour measured for the BD companion is slightly bluer, but still consistent with what typically found for L2 dwarfs(~3.4-3.6).

astro-ph.IM↗

arXiv2010

High spatial resolution and high contrast optical speckle imaging with FASTCAM at the ORM

In this paper, we present an original observational approach, which combines, for the first time, traditional speckle imaging with image post-processing to obtain in the optical domain diffraction-limited images with high contrast (1e-5) within 0.5 to 2 arcseconds around a bright star. The post-processing step is based on wavelet filtering an has analogy with edge enhancement and high-pass filtering. Our I-band on-sky results with the 2.5-m Nordic Telescope (NOT) and the lucky imaging instrument FASTCAM show that we are able to detect L-type brown dwarf companions around a solar-type star with a contrast DI~12 at 2" and with no use of any coronographic capability, which greatly simplifies the instrumental and hardware approach. This object has been detected from the ground in J and H bands so far only with AO-assisted 8-10 m class telescopes (Gemini, Keck), although more recently detected with small-class telescopes in the K band. Discussing the advantage and disadvantage of the optical regime for the detection of faint intrinsic fluxes close to bright stars, we develop some perspectives for other fields, including the study of dense cores in globular clusters. To the best of our knowledge this is the first time that high contrast considerations are included in optical speckle imaging approach.

astro-ph.IM↗

arXiv2010

The Imaging Magnetograph eXperiment (IMaX) for the Sunrise balloon-borne solar observatory

The Imaging Magnetograph eXperiment (IMaX) is a spectropolarimeter built by four institutions in Spain that flew on board the Sunrise balloon-borne telesocope in June 2009 for almost six days over the Arctic Circle. As a polarimeter IMaX uses fast polarization modulation (based on the use of two liquid crystal retarders), real-time image accumulation, and dual beam polarimetry to reach polarization sensitivities of 0.1%. As a spectrograph, the instrument uses a LiNbO3 etalon in double pass and a narrow band pre-filter to achieve a spectral resolution of 85 mAA. IMaX uses the high Zeeman sensitive line of Fe I at 5250.2 AA and observes all four Stokes parameters at various points inside the spectral line. This allows vector magnetograms, Dopplergrams, and intensity frames to be produced that, after reconstruction, reach spatial resolutions in the 0.15-0.18 arcsec range over a 50x50 arcsec FOV. Time cadences vary between ten and 33 seconds, although the shortest one only includes longitudinal polarimetry. The spectral line is sampled in various ways depending on the applied observing mode, from just two points inside the line to 11 of them. All observing modes include one extra wavelength point in the nearby continuum. Gauss equivalent sensitivities are four Gauss for longitudinal fields and 80 Gauss for transverse fields per wavelength sample. The LOS velocities are estimated with statistical errors of the order of 5-40 m/s. The design, calibration and integration phases of the instrument, together with the implemented data reduction scheme are described in some detail.

astro-ph.SR↗