arXiv subjects

J. Pratt

Publications and source records attributed to J. Pratt.

At least 19 recordsLinked to original sources

arXiv2026

The science of compressional heating on the LM26 magnetized target fusion experiment

The Lawson Machine 26 (LM26) at General Fusion has demonstrated compressional heating of a spherical tokamak deuterium plasma as it was compressed by an imploding solid lithium liner. Results from the first 11 compression shots on LM26 are presented, the highest-performing of which show more than a 3x increase in $T_e$, a 10x increase in $n_e$, and a 10x increase in $B_{pol}$ within the plasma driven by 3x radial compression. The experimental device and instrumentation are reviewed in detail, followed by observations about the liner trajectory and evolution of plasma properties, including increases in emission of neutrons, X-rays, and visible radiation. Observations from fast-camera images during compression provide context for interpreting the spatial structure of plasma-wall interaction. Overviews of relevant models and analysis are presented. Diagnostic data are used to reconstruct the experimental equilibrium state in computational framework as a function of time. The results build confidence in the stability and transport analyses that support the primary conclusions. Trends across the full set of 11 compression shots are presented, and detailed examinations of the high-performance shots are given individually. The central conclusions of the integrated physics model specifically indicate that compressional heating was achieved in this set of experiments, as evidenced by the balance of heating power from compression, Ohmic heating from plasma current, and losses to the boundary needed to match the experimental data. A majority of the temperature rise is attributable to compressional heating. An increase in neutron flux is also observed during compression. The results provide a basis for planned improvements to the LM26 facility that will enable the compression of magnetized plasma to increasingly higher densities and temperatures.

physics.plasm-ph↗

arXiv2026

Closure models for the feedback of energetic particles on plasma turbulence

Energetic particles interact with the plasma surrounding them, resonating with certain plasma waves to stabilize them while destabilizing others, and changing the character of the background turbulence in ways that have not been fully quantified or understood. Interaction with the turbulent background plasma is key to the acceleration of many types of energetic particles including high-energy cosmic rays, solar energetic particles, and pick-up ions. This is a process that would ideally be described by a kinetic model, a type of model that follows a probability distribution function (PDF) for all particles in 7-dimensional space. Because of the high dimensionality of a kinetic model, such simulations use the largest computational resources available, and are yet unable to simulate a realistic number of particles, reach the large scales necessary for astrophysical problems, or use high-precision numerical methods. Two available alternatives to kinetic plasma models have been explored: a multi-fluid model, and a hybrid fluid/Fokker-Planck model. These methods are hampered by the physical modeling of the coupling. We develop a new model, which follows the PDF for all particles; this can be viewed as a step toward physical realism above a multi-fluid MHD model, while also being more computationally efficient than a kinetic model. The equations we develop model both the background plasma and the energetic particles self-consistently. Over the last decade, similar PDF methods have been developed to a high level of sophistication to model reactive flows and turbulent combustion for engineering applications. For treatment of the feedback of the energetic particles on a background plasma, a PDF closure approach should evaluate the mean characteristics, including the density, with better statistical quality than will particle-sampling procedures.

astro-ph.HE↗

arXiv2025

Optimal Control from a Fluid Dynamics Perspective

An optimal control problem described by the Hamilton-Jacobi-Bellman equation can be developed into a problem that can be solved by general computational fluid dynamics packages. We describe how this formulation would allow a classical problem in optimal control, Zermelo's problem, to be treated as a multi-fluid problem. This approach has the advantage of allowing optimal navigation problems to be conducted over large areas, as well as to include moderately larger numbers of ships. We draw comparisons between this approach and the field of fluid control for fluid animations in movies.

physics.flu-dyn↗

arXiv2025

Mass dependence of overshooting beneath convective envelopes

Although the dependence of convective core overshooting on mass has attracted much attention, no corresponding work exists for overshooting below a convective envelope. We aim to quantify this relationship for pre-main sequence stars of intermediate mass ranging from $1.2 M_{\mathsf{sun}}$ to $6 M_{\mathsf{sun}}$. These stars have a similar thermal and density structure, making this a suitable choice to isolate the effect of changing mass. We produce a series of two-dimensional global simulations of stars using MUSIC, a fully compressible, time-implicit hydrodynamics code. The stars that we select for this study are near the end of the pre-main sequence and are convectively unstable above 80% of their stellar radius; they thus have a convective envelope that is shallower than the current sun. For this series of stellar models, a simple scaling with luminosity, with a scaling exponent of 1/4, accounts for the increasing overshooting with stellar mass. This result has interesting similarities with the scaling found by Baraffe et al. [2023] for a range of intermediate mass and massive stars at the zero-age main sequence (ZAMS) that have convective cores.

astro-ph.SR↗

arXiv2024

The shape of convection in 2D and 3D global simulations of stellar interiors

Theoretical descriptions of convective overshooting often rely on a one-dimensional parameterization of the flow called the filling factor for convection. Several definitions of the filling factor have been developed, based on: (1) the percentage of the volume, (2) the mass flux, and (3) the convective flux that moves through the boundary. We examine these definitions of the filling factor with the goal of establishing their ability to explain differences between 2D and 3D global simulations of stellar interiors that include fully compressible hydrodynamics and realistic microphysics for stars. We study pairs of identical two- and three-dimensional global simulations of stars produced with MUSIC, a fully compressible, time-implicit hydrodynamics code. We examine (1) a $3 M_\odot$ red giant star near the first dredge-up point, (2) a $1 M_\odot$ pre-main-sequence star with a large convection zone, (3) the current sun, and (4) a $20 M_\odot$ main-sequence star with a large convective core. Our calculations of the filling factor based on the volume percentage and the mass flux indicate asymmetrical convection near the surface for each star with an outer convection zone. However, near the convective boundary, convective flows achieve inward-outward symmetry; for 2D and 3D simulations, these filling factors are indistinguishable. A filling factor based on the convective flux is contaminated by boundary-layer-like flows, making theoretical interpretation difficult. We present two new alternatives to these standard definitions, which compare flows at two different radial points. The first is the penetration parameter of Anders et al. (2022). The second is a new statistic, the plume interaction parameter. We demonstrate that both of these parameters capture systematic differences between 2D and 3D simulations around the convective boundary.

astro-ph.SR↗

arXiv2023

Two-dimensional simulations of internal gravity waves in a 5 $M_{\odot}$ Zero-Age-Main-Sequence model

Main-sequence intermediate-mass stars present a radiative envelope that supports internal gravity waves (IGWs). Excited at the boundary with the convective core, IGWs propagate towards the stellar surface and are suspected to impact physical processes such as rotation and chemical mixing. Using the fully compressible time-implicit code MUSIC, we study IGWs in two-dimensional simulations of a zero-age-main-sequence 5 solar mass star model up to 91\% of the stellar radius with different luminosity and radiative diffusivity enhancements. Our results show that low frequency waves excited by core convection are strongly impacted by radiative effects as they propagate. This impact depends on the radial profile of radiative diffusivity which increases by almost 5 orders of magnitude between the centre of the star and the top of the simulation domain. In the upper layers of the simulation domain, we observe an increase of the temperature. Our study suggests that this is due to heat added in these layers by IGWs damped by radiative diffusion. We show that non-linear effects linked to large amplitude IGWs may be relevant just above the convective core. Both these effects are intensified by the artificial enhancement of the luminosity and radiative diffusivity, with enhancement factors up to $10^4$ times the realistic values. Our results also highlight that direct comparison between numerical simulations with enhanced luminosity and observations must be made with caution. Finally, our work suggests that thermal effects linked to the damping of IGWs could have a non-negligible impact on stellar structure.

astro-ph.SR↗

arXiv2023

A study of convective core overshooting as a function of stellar mass based on two-dimensional hydrodynamical simulations

We perform two-dimensional numerical simulations of core convection for zero-age-main-sequence stars covering a mass range from 3 $M_\odot$ to 20 $M_\odot$. The simulations are performed with the fully compressible time-implicit code MUSIC. We study the efficiency of overshooting, which describes the ballistic process of convective flows crossing a convective boundary, as a function of stellar mass and luminosity. We also study the impact of artificially increasing the stellar luminosity for 3 $M_\odot$ models. The simulations cover hundreds to thousands of convective turnover timescales. Applying the framework of extreme plume events previously developed for convective envelopes, we derive overshooting lengths as a function of stellar masses. We find that the overshooting distance ($d_{\rm ov}$) scales with the stellar luminosity ($L$) and the convective core radius ($r_{\rm conv}$). We derive a scaling law $d_{\rm ov} \propto L^{1/3} r_{\rm conv}^{1/2}$ which is implemented in a 1D stellar evolution code and the resulting stellar models are compared to observations. The scaling predicts values for the overshooting distance that significantly increase with stellar mass, in qualitative agreement with observations. Quantitatively, however, the predicted values are underestimated for masses $\gtrsim 10 M_\odot$. Our 2D simulations show the formation of a nearly-adiabatic layer just above the Schwarzschild boundary of the convective core, as exhibited in recent 3D simulations of convection. The most luminous models show a growth in size with time of the nearly-adiabatic layer. This growth seems to slow down as the upper edge of the nearly-adiabatic layer gets closer to the maximum overshooting length and as the simulation time exceeds the typical thermal diffusive timescale in the overshooting layer.

astro-ph.SR↗

arXiv2022

Reynolds number dependence of Lagrangian dispersion in direct numerical simulations of anisotropic magnetohydrodynamic turbulence

Large-scale magnetic fields thread through the electrically conducting matter of the interplanetary and interstellar medium, stellar interiors, and other astrophysical plasmas, producing anisotropic flows with regions of high-Reynolds-number turbulence. It is common to encounter turbulent flows structured by a magnetic field with a strength approximately equal to the root-mean-square magnetic fluctuations. In this work, direct numerical simulations of anisotropic magnetohydrodynamic (MHD) turbulence influenced by such a magnetic field are conducted for a series of cases that have identical resolution, and increasing grid sizes up to $2048^3$. The result is a series of closely comparable simulations at Reynolds numbers ranging from 1,400 up to 21,000. We investigate the influence of the Reynolds number from the Lagrangian viewpoint by tracking fluid particles and calculating single-particle and two-particle statistics. The influence of Alfv\'enic fluctuations and the fundamental anisotropy on the MHD turbulence in these statistics is discussed. Single-particle diffusion curves exhibit mildly superdiffusive behaviors that differ in the direction aligned with the magnetic field and the direction perpendicular to it. Competing alignment processes affect the dispersion of particle pairs, in particular at the beginning of the inertial subrange of time scales. Scalings for relative dispersion, which become clearer in the inertial subrange for larger Reynolds number, can be observed that are steeper than indicated by the Richardson prediction.

physics.flu-dyn↗

arXiv2022

Impact of radial truncation on global 2D hydrodynamic simulations for a Sun-like model

Stellar convection is a non-local process responsible for the transport of heat and chemical species. It can lead to enhanced mixing through convective overshooting and excitation of internal gravity waves (IGWs) at convective boundaries. The relationship between these processes is still not well understood and requires global hydrodynamic simulations to capture the important large-scale dynamics. The steep stratification in stellar interiors suggests that the radial extent of such simulations can affect the convection dynamics, the IGWs in the stably stratified radiative zone, and the depth of the overshooting layer. We investigate these effects using two-dimensional global simulations performed with the fully compressible stellar hydrodynamics code MUSIC. We compare eight different radial truncations of the same solar-like stellar model evolved over approximately 400 convective turnover times. We find that the location of the inner boundary has an insignificant effect on the convection dynamics, the convective overshooting and the travelling IGWs. We relate this to the background conditions at the lower convective boundary which are unaffected by the truncation, as long as a significantly deep radiative layer is included in the simulation domain. However, we find that extending the outer boundary by only a few percent of the stellar radius significantly increases the velocity and temperature perturbations in the convection zone, the overshooting depth, the power and the spectral slope of the IGWs. The effect is related to the background conditions at the outer boundary, which are determined in essence by the hydrostatic stratification and the given luminosity.

astro-ph.SR↗

arXiv2022

Two-dimensional simulations of solar-like models with artificially enhanced luminosity. II. Impact on internal gravity waves

Artificially increasing the luminosity and the thermal diffusivity of a model is a common tactic adopted in hydrodynamical simulations of stellar convection. In this work, we analyse the impact of these artificial modifications on the physical properties of stellar interiors and specifically on internal gravity waves. We perform two-dimensional simulations of solar-like stars with the MUSIC code. We compare three models with different luminosity enhancement factors to a reference model. The results confirm that properties of the waves are impacted by the artificial enhancement of the luminosity and thermal diffusivity. We find that an increase in the stellar luminosity yields a decrease in the bulk convective turnover timescale and an increase in the characteristic frequency of excitation of the internal waves. We also show that a higher energy input in a model, corresponding to a larger luminosity, results in higher energy in high frequency waves. Across our tests with the luminosity and thermal diffusivity enhanced together by up to a factor of 104, our results are consistent with theoretical predictions of radiative damping. Increasing the luminosity also has an impact on the amplitude of oscillatory motions across the convective boundary. One must use caution when interpreting studies of internal gravity waves based on hydrodynamical simulations with artificially enhanced luminosity.

astro-ph.SR↗

arXiv2021

Dynamics in a stellar convective layer and at its boundary: Comparison of five 3D hydrodynamics codes

Our ability to predict the structure and evolution of stars is in part limited by complex, 3D hydrodynamic processes such as convective boundary mixing. Hydrodynamic simulations help us understand the dynamics of stellar convection and convective boundaries. However, the codes used to compute such simulations are usually tested on extremely simple problems and the reliability and reproducibility of their predictions for turbulent flows is unclear. We define a test problem involving turbulent convection in a plane-parallel box, which leads to mass entrainment from, and internal-wave generation in, a stably stratified layer. We compare the outputs from the codes FLASH, MUSIC, PPMSTAR, PROMPI, and SLH, which have been widely employed to study hydrodynamic problems in stellar interiors. The convection is dominated by the largest scales that fit into the simulation box. All time-averaged profiles of velocity components, fluctuation amplitudes, and fluxes of enthalpy and kinetic energy are within $\lesssim 3\sigma$ of the mean of all simulations on a given grid ($128^3$ and $256^3$ grid cells), where $\sigma$ describes the statistical variation due to the flow's time dependence. They also agree well with a $512^3$ reference run. The $128^3$ and $256^3$ simulations agree within $9\%$ and $4\%$, respectively, on the total mass entrained into the convective layer. The entrainment rate appears to be set by the amount of energy that can be converted to work in our setup and details of the small-scale flows in the boundary layer seem to be largely irrelevant. Our results lend credence to hydrodynamic simulations of flows in stellar interiors. We provide in electronic form all outputs of our simulations as well as all information needed to reproduce or extend our study.

astro-ph.SR↗

arXiv2021

Two-dimensional simulations of solar-like models with artificially enhanced luminosity -- I. Impact on convective penetration

We perform 2D, fully compressible, time-implicit simulations of convection in a solar-like model with the MUSIC code. Our main motivation is to explore the impact of a common tactic adopted in numerical simulations of convection that use realistic stellar conditions. This tactic is to artificially increase the luminosity and to modify the thermal diffusivity of the reference stellar model. This work focuses on the impact of these modifications on convective penetration (or overshooting) at the base of the convective envelope of a solar-like model. We explore a range of enhancement factors for the energy input and confirm the increase in the characteristic overshooting depth with the increase in the energy input. Our results highlight the importance of the impact of penetrative downflows on the thermal background below the convective boundary. This is a result of compression and shear which induce local heating and thermal mixing. The artificial increase in the energy flux intensifies the heating process by increasing the velocities in the convective zone and at the convective boundary, revealing a subtle connection between the local heating of the thermal background and the plume dynamics. This heating also increases the efficiency of heat transport by radiation which may counterbalance further heating and helps to establish a steady state. The modification of the thermal background by penetrative plumes impacts the width of the overshooting layer. Our results suggest that an artificial modification of the radiative diffusivity in the overshooting layer, rather than only accelerating the thermal relaxation, could also alter the dynamics of the penetrating plumes and thus the width of the overshooting layer. Results from simulations with an artificial modification of the energy flux and of the thermal diffusivity should be regarded with caution if used to determine an overshooting width.

astro-ph.SR↗

arXiv2020

Comparison of two- and three-dimensional compressible convection in a pre-main sequence star

Extending our recent studies of two-dimensional stellar convection to 3D, we compare three-dimensional hydrodynamic simulations to identically set-up two-dimensional simulations, for a realistic pre-main sequence star. We compare statistical quantities related to convective flows including: average velocity, vorticity, local enstrophy, and penetration depth beneath a convection zone. These statistics are produced during stationary, steady-state compressible convection in the star's convection zone. Our simulations with the MUSIC code confirm the common result that two-dimensional simulations of stellar convection have a higher magnitude of velocity on average than three-dimensional simulations. Boundary conditions and the extent of the spherical shell can affect the magnitude and variability of convective velocities. The difference between 2D and 3D velocities is dependent on these background points; in our simulations this can have an effect as large as the difference resulting from the dimensionality of the simulation. Nevertheless, radial velocities near the convective boundary are comparable in our 2D and 3D simulations. The average local enstrophy of the flow is lower for two-dimensional simulations than for three-dimensional simulations, indicating a different shape and structuring of 3D stellar convection. We perform a statistical analysis of the depth of convective penetration below the convection zone, using the model proposed in our recent study (Pratt et al. 2017). Here we analyze the convective penetration in three dimensional simulations, and compare the results to identically set-up 2D simulations. In 3D the penetration depth is as large as the penetration depth calculated from 2D simulations.

astro-ph.SR↗

arXiv2019

A well-balanced scheme for the simulation tool-kit A-MaZe: implementation, tests, and first applications to stellar structure

Characterizing stellar convection in multiple dimensions is a topic at the forefront of stellar astrophysics. Numerical simulations are an essential tool for this task. We present an extension of the existing numerical tool-kit A-MaZe that enables such simulations of stratified flows in a gravitational field. The finite-volume based, cell-centered, and time-explicit hydrodynamics solver of A-MaZe was extended such that the scheme is now well-balanced in both momentum and energy. The algorithm maintains an initially static balance between gravity and pressure to machine precision. Quasi-stationary convection in slab-geometry preserves gas energy (internal plus kinetic) on average despite strong local up- and down-drafts. By contrast, a more standard numerical scheme is demonstrated to result in substantial gains of energy within a short time on purely numerical grounds. The test is further used to point out the role of dimensionality, viscosity, and Rayleigh number for compressible convection. Applications to a young sun in 2D and 3D, covering a part of the inner radiative zone as well as the outer convective zone, demonstrate that the scheme meets its initial design goal. Comparison with results obtained for a physically identical setup with a time-implicit code show qualitative agreement.

astro-ph.SR↗

arXiv2017

Lithium depletion in solar-like stars: effect of overshooting based on realistic multi-dimensional simulations

We study lithium depletion in low-mass and solar-like stars as a function of time, using a new diffusion coefficient describing extra-mixing taking place at the bottom of a convective envelope. This new form is motivated by multi-dimensional fully compressible, time implicit hydrodynamic simulations performed with the MUSIC code. Intermittent convective mixing at the convective boundary in a star can be modeled using extreme value theory, a statistical analysis frequently used for finance, meteorology, and environmental science. In this letter, we implement this statistical diffusion coefficient in a one-dimensional stellar evolution code, using parameters calibrated from multi-dimensional hydrodynamic simulations of a young low-mass star. We propose a new scenario that can explain observations of the surface abundance of lithium in the Sun and in clusters covering a wide range of ages, from $\sim$ 50 Myr to $\sim$ 4 Gyr. Because it relies on our physical model of convective penetration, this scenario has a limited number of assumptions. It can explain the observed trend between rotation and depletion, based on a single additional assumption, namely that rotation affects the mixing efficiency at the convective boundary. We suggest the existence of a threshold in stellar rotation rate above which rotation strongly prevents the vertical penetration of plumes and below which rotation has small effects. In addition to providing a possible explanation for the long standing problem of lithium depletion in pre-main sequence and main sequence stars, the strength of our scenario is that its basic assumptions can be tested by future hydrodynamic simulations.

astro-ph.SR↗

arXiv2017

Extreme value statistics for two-dimensional convective penetration in a pre-Main Sequence star

We examine a penetration layer formed between a central radiative zone and a large convection zone in the deep interior of a young low-mass star. Using the Multidimensional Stellar Implicit Code (MUSIC) to simulate two-dimensional compressible stellar convection in a spherical geometry over long times, we produce statistics that characterize the extent and impact of convective penetration in this layer. We apply extreme value theory to the maximal extent of convective penetration at any time. We compare statistical results from simulations which treat non-local convection, throughout a large portion of the stellar radius, with simulations designed to treat local convection in a small region surrounding the penetration layer. For each of these situations, we compare simulations of different resolution, which have different velocity magnitudes. We also compare statistical results between simulations that radiate energy at a constant rate to those that allow energy to radiate from the stellar surface according to the local surface temperature. Based on the frequency and depth of penetrating convective structures, we observe two distinct layers that form between the convection zone and the stable radiative zone. We show that the probability density function of the maximal depth of convective penetration at any time corresponds closely in space with the radial position where internal waves are excited. We find that the maximal penetration depth can be modeled by a Weibull distribution with a small shape parameter. Using these results, and building on established scalings for diffusion enhanced by large-scale convective motions, we propose a new form for the diffusion coefficient that may be used for one-dimensional stellar evolution calculations in the large Péclet number regime. These results should contribute to the 321D link.

astro-ph.SR↗

arXiv2017

Extreme-value statistics from Lagrangian convex hull analysis for homogeneous turbulent Boussinesq convection and MHD convection

We investigate the utility of the convex hull of many Lagrangian tracers to analyze transport properties of turbulent flows with different anisotropy. In direct numerical simulations of statistically homogeneous and stationary Navier-Stokes turbulence, neutral fluid Boussinesq convection, and MHD Boussinesq convection a comparison with Lagrangian pair dispersion shows that convex hull statistics capture the asymptotic dispersive behavior of a large group of passive tracer particles. Moreover, convex hull analysis provides additional information on the sub-ensemble of tracers that on average disperse most efficiently in the form of extreme value statistics and flow anisotropy via the geometric properties of the convex hulls. We use the convex hull surface geometry to examine the anisotropy that occurs in turbulent convection. Applying extreme value theory, we show that the maximal square extensions of convex hull vertices are well described by a classic extreme value distribution, the Gumbel distribution. During turbulent convection, intermittent convective plumes grow and accelerate the dispersion of Lagrangian tracers. Convex hull analysis yields information that supplements standard Lagrangian analysis of coherent turbulent structures and their influence on the global statistics of the flow.

physics.flu-dyn↗

arXiv2016

Benchmarking the Multi-dimensional Stellar Implicit Code MUSIC

We present the results of a numerical benchmark study for the MUlti-dimensional Stellar Implicit Code (MUSIC) based on widely applicable two- and three-dimensional compressible hydrodynamics problems relevant to stellar interiors. MUSIC is an implicit large eddy simulation code that uses implicit time integration, implemented as a Jacobian-free Newton Krylov method. A physics based preconditioning technique which can be adjusted to target varying physics is used to improve the performance of the solver. The problems used for this benchmark study include the Rayleigh-Taylor and Kelvin-Helmholtz instabilities, and the decay of the Taylor-Green vortex. Additionally we show a test of hydrostatic equilibrium, in a stellar environment which is dominated by radiative effects. In this setting the flexibility of the preconditioning technique is demonstrated. This work aims to bridge the gap between the hydrodynamic test problems typically used during development of numerical methods and the complex flows of stellar interiors. A series of multi-dimensional tests are performed and analysed. Each of these test cases is analysed with a simple, scalar diagnostic, with the aim of enabling direct code comparisons. As the tests performed do not have analytic solutions we verify MUSIC by comparing to established codes including ATHENA and the PENCIL code. MUSIC is able to both reproduce behaviour from established and widely-used codes as well as results expected from theoretical predictions. This benchmarking study concludes a series of papers describing the development of the MUSIC code and provides confidence in the future applications.

astro-ph.IM↗