Searcharxiv⌕ Search

arXiv subjects

J. R. Hörandel

Publications and source records attributed to J. R. Hörandel.

At least 19 recordsLinked to original sources

Investigating double bump air showers with the SKA-Low

Double-bump showers are a rare class of extensive air showers (EAS) predicted by Monte Carlo simulations. They occur when a high-energy secondary particle, the leading particle, travels significantly farther than the rest, creating a distinct double-peaked longitudinal profile. So far, no experiment has been able to directly detect these showers. The unique radio footprint of double-bump showers, characterized by multiple Cherenkov rings, provides a way to reconstruct longitudinal profiles from radio observations. With its dense antenna array and broad frequency range, the Square Kilometer Array Observatory (SKAO) will be the first experiment capable of detecting these features, offering a new opportunity to probe hadronic interactions and constrain particle cross sections at high energies. In our analysis, we simulate the EAS using CORSIKA with the CoREAS plugin for radio. We developed a new method based on the Akaike information criterion to identify double bump showers in simulations by analyzing their longitudinal profiles. Then we investigate the prevalence of these double bump showers across different cosmic ray primary particles and various hadronic interaction models. We create a skeleton of the EAS which consists of all the particles with at least $1\%$ of the primary energy, allowing us to confirm the leading particle hypothesis and track shower development following these particles. This will enable us to relate the attributes of the leading particle to measurable parameters. Depending on the exact shower properties, the radio footprint of a double bump shower can create a complex interference pattern, consisting of multiple rings. From this information, the longitudinal profiles can be extracted. SKA due to its dense antenna array and frequency range will be the first experiment able to observe these double bump showers in detail.

astro-ph.HE↗

Cosmic ray energy spectra derived from KASCADE-Grande data using post-LHC hadronic interaction models

KASCADE-Grande was dedicated to measuring the energy spectrum and mass composition of cosmic rays in the energy range of 10 PeV to 1 EeV. We observed a knee-like structure in the heavy mass component at around 100 PeV and an ankle-like structure in the light component. In this contribution, we present updated energy spectra based on shower size measurements, using the post-LHC hadronic models QGSJet-II-04, EPOS-LHC, and SIBYLL 2.3d, including accounting for shower-to-shower fluctuations. In addition, the newly released EPOS-LHC-R model is tested for the first time with KASCADE-Grande. We will compare and discuss the results obtained using the different hadronic interaction models.

astro-ph.HE↗

A novel approach for air shower profile reconstruction with dense radio antenna arrays using Information Field Theory

Reconstructing the longitudinal profile of extensive air showers, generated from the interaction of cosmic rays in the Earth's atmosphere, is crucial to understanding their mass composition, which in turn provides valuable insight on their possible sources of origin. Dense radio antenna arrays such as the LOw Frequency ARray (LOFAR) telescope as well as the upcoming Square Kilometre Array Observatory (SKAO) are ideal instruments to explore the potential of air shower profile reconstruction, as their high antenna density allows cosmic ray observations with unprecedented accuracy. However, current analysis approaches can only recover $X_\mathrm{max}$, the atmospheric depth at shower maximum, and heavily rely on computationally expensive simulations. As such, it is ever more crucial to develop new analysis approaches that can perform a full air shower profile reconstruction efficiently. In this work, we develop a novel framework to reconstruct the longitudinal profile of air showers using measurements from radio detectors with Information Field Theory (IFT), a state-of-the-art reconstruction framework based on Bayesian inference. Through IFT, we are able to exploit all available information in the signal (amplitude, phase, and pulse shape) at each antenna position simultaneously and explicitly utilise models that are motivated through our current understanding of air shower physics. We verify our framework on simulated datasets prepared for LOFAR, showcasing that we can not only reconstruct the air shower profile with uncertainties in each atmospheric depth bin but also recover the reconstructed trace at each antenna position. Our framework demonstrates that radio measurements with dense antenna layouts such as LOFAR and SKAO have the capability to go beyond reconstruction of $X_\mathrm{max}$ and will thus aid in our understanding of the mass composition of cosmic rays.

astro-ph.IM↗

A LOFAR-style reconstruction of cosmic-ray air showers with SKA-Low

Cosmic-ray air shower detection with the low-frequency part of the Square Kilometre Array (SKA) radio telescope is envisioned to yield very high precision measurements of the particle composition of cosmic rays between $10^{16}$ and $10^{18}$ eV. This is made possible by the extreme antenna density of the core of SKA-Low, surpassing the current most dense radio air shower observatory LOFAR by over an order of magnitude. In order to make these measurements, the technical implementation of this observation mode and the development of reconstruction methods have to happen hand-in-hand. As a first lower limit of what is obtainable, we apply the current most precise reconstruction methods as used at LOFAR to a first complete simulation of air shower signals for the SKA-Low array. We describe this simulation setup and discuss the obtainable accuracy and resolution. A special focus is put on effects of the dynamic range of the system, beamforming methods to lower the energy threshold, as well as the limits to the mass composition accuracy given by statistical and systematic uncertainties.

astro-ph.HE↗

Cosmic ray detection with the LOFAR radio telescope

The LOw Frequency ARray (LOFAR) has successfully measured cosmic rays for over a decade now. With its dense core of antenna fields in the Netherlands, it is an ideal tool for studying the radio emission from extensive air showers in the $10^{16}$ eV to $10^{18.5}$ eV range. Every air shower is measured with a small particle detector array and hundreds of antennas, which sets LOFAR apart from other air shower arrays. We present our current achievements and progress in reconstruction, interpolation, and software development during the final phases of measurement of LOFAR 1.0, before the LOFAR array gets a significant upgrade, including also plans for the final data release and refined analyses.

astro-ph.HE↗

Latest Analysis Results from the KASCADE-Grande Data

KASCADE-Grande, the extension of the multi-detector setup of KASCADE, was devoted to measure the properties of extensive air showers initiated by high-energy cosmic rays in the primary energy range of 1 PeV up to 1 EeV. The observations of the energy spectrum and mass composition of cosmic rays contribute with great detail to the understanding of the transition from galactic to extragalactic origin of cosmic rays, and furthermore to validate the properties of hadronic interaction models in the air shower development. Although the experiment is fully dismantled, the analysis of the entire KASCADE-Grande data set continues. We have recently investigated the impact of different post-LHC hadronic interaction models, QGSJETII-04, EPOS-LHC, Sibyll 2.3d, on air shower predictions in terms of the reconstructed spectra of heavy and light primary masses, including systematic uncertainties. In addition, the conversely discussed evolution of the muon content of high-energy air showers in the atmosphere is compared with the predictions of different interaction models. In this contribution, the latest results from the KASCADE-Grande measurements will be discussed.

astro-ph.HE↗

A high-precision interpolation method for pulsed radio signals from cosmic-ray air showers

Analysis of radio signals from cosmic-ray induced air showers has been shown to be a reliable method to extract shower parameters such as primary energy and depth of shower maximum. The required detailed air shower simulations take 1 to 3 days of CPU time per shower for a few hundred antennas. With nearly $60,000$ antennas envisioned to be used for air shower studies at the Square Kilometre Array (SKA), simulating all of these would come at unreasonable costs. We present an interpolation algorithm to reconstruct the full pulse time series at any position in the radio footprint, from a set of antennas simulated on a polar grid. Relying on Fourier series representations and cubic splines, it significantly improves on existing linear methods. We show that simulating about 200 antennas is sufficient for high-precision analysis in the SKA era, including e.g. interferometry which relies on accurate pulse shapes and timings. We therefore propose the interpolation algorithm and its implementation as a useful extension of radio simulation codes, to limit computational effort while retaining accuracy.

astro-ph.IM↗

Reconstructing Air Shower Parameters with MGMR3D

Measuring the radio emission from cosmic ray particle cascades has proven to be a very efficient method to determine their properties such as the mass composition. Efficient modeling of the radio emission from air showers is crucial in order to extract the cosmic ray physics parameters from the measured radio emission. MGMR3D is a fast semi-analytic code that calculates the complete radio footprint, i.e.\ intensity, polarization, and pulse shapes, for a parametrized shower-current density and can be used in a chi-square optimization to fit a given radio data. It is many orders of magnitude faster than its Monte Carlo counterparts. We provide a detailed comparative study of MGMR3D to Monte Carlo simulations, where, with improved parametrizations, the shower maximum $\Xmax$ is found to have very strong agreement with a small dependency on the incoming zenith angle of the shower. Another interesting feature we observe with MGMR3D is sensitivity to the shape of the longitudinal profile in addition to $\Xmax$. This is achieved by probing the distinguishable radio footprint produced by a shower having a different longitudinal profile than usual. Furthermore, for the first time, we show the results of reconstructing shower parameters for LOFAR data using MGMR3D, and obtaining a $\Xmax$ resolution of 22 g/cm$^2$ and energy resolution of 19\%.

astro-ph.HE↗

Constraining the cosmic-ray mass composition by measuring the shower length with SKA

The current generation of air shower radio arrays has demonstrated that the atmospheric depth of the shower maximum Xmax can be reconstructed with high accuracy. These experiments are now contributing to mass composition studies in the energy range where a transition from galactic to extragalactic cosmic-ray sources is expected. However, we are still far away from an unambiguous interpretation of the data. Here we propose to use radio measurements to derive a new type of constraint on the mass composition, by reconstructing the shower length L. The low-frequency part of the Square Kilometer Array will have an extremely high antenna density of roughly 60.000 antennas within one square kilometer, and is the perfect site for high-resolution studies of air showers. In this contribution, we discuss the impact of being able to reconstruct L, and the unique contribution that SKA can make to cosmic-ray science.

astro-ph.HE↗

Ultra-High-Energy Cosmic Rays: The Intersection of the Cosmic and Energy Frontiers

The present white paper is submitted as part of the "Snowmass" process to help inform the long-term plans of the United States Department of Energy and the National Science Foundation for high-energy physics. It summarizes the science questions driving the Ultra-High-Energy Cosmic-Ray (UHECR) community and provides recommendations on the strategy to answer them in the next two decades.

astro-ph.HE↗

Prospects for measuring the longitudinal particle distribution of cosmic-ray air showers with SKA

We explore the possibilities of measuring the longitudinal profile of individual air showers beyond $X_{\rm max}$ when using very dense radio arrays such as SKA. The low-frequency part of the Square Kilometre Array, to be built in Australia, features an enormous antenna density of about $50,000$ antennas in the inner core region of radius 500 m, with a frequency band from 50 to 350 MHz. From CoREAS simulations, a SKA-Low antenna model plus noise contributions, and adapted LOFAR analysis scripts, we obtain a resolution in the shower maximum $X_{\rm max}$ and energy that is considerably better than at LOFAR. Already from this setup, we show that at least one additional parameter of the longitudinal profile can be measured. This would improve mass composition analysis by measuring an additional composition-dependent quantity. Moreover, it would offer an opportunity to discriminate between the different predictions of hadronic interaction models, hence contributing to hadronic physics at energy levels beyond man-made accelerators.

astro-ph.HE↗

Results from recent analysis of KASCADE-Grande data

KASCADE and its extension array of KASCADE-Grande were devoted to measure individual air showers of cosmic rays in the primary energy range of 100 TeV to 1 EeV. The experiment has substantially contributed to investigate the energy spectrum and mass composition of cosmic rays in the transition region from galactic to extragalactic origin of cosmic rays as well as to quantify the characteristics of hadronic interaction models in the air shower development through validity tests using the multi-detector information from KASCADE-Grande. Although the data accumulation was completed in 2013, data analysis is still continuing. Recently, we investigated the reliability of the new hadronic interactions models of the SIBYLL version 2.3d only with the energy spectra from the KASCADE-Grande data. The evolution of the muon content of high energy air showers in the atmosphere is studied as well, using EPOS-LHC, SIBYLL 2.3, QGSJET-II-04 and SIBYLL 2.3c. In this talk, recent results from KASCADE-Grande and the update of the KASCADE Cosmic Ray Data Centre (KCDC) will be discussed.

astro-ph.HE↗

LOPES 3D -- studies on the benefits of EAS-radio measurements with vertically aligned antennas

The LOPES experiment was a radio interferometer built at the existing air shower array KASCADE-Grande in Karlsruhe, Germany. The last configuration of LOPES was called LOPES 3D and consisted of ten tripole antennas. Each of these antennas consisted of three crossed dipoles east-west, north-south, and vertically aligned. With this, LOPES 3D had the unique possibility to study the benefits of measurements with vertically aligned antennas in the environment of the well understood and calibrated particle detector array KASCADE-Grande. The measurements with three spatially coincident antennas allows a redundant reconstruction of the electric field vector. Several methods to exploit the redundancy were developed and tested. Furthermore, for the first time in LOPES, the background noise could be studied polarization- and direction dependent. With LOPES 3D it could be demonstrated that radio detection reaches a higher efficiency for inclined showers when including measurements with vertically aligned antennas and that the vertical component gets more important for the measurement of inclined showers. In this contribution we discuss a weighting scheme for the best combination of three redundant reconstructed electric field vectors. Furthermore, we discuss the influence of these weighting schemes on the ability to reconstruct air showers using the radio method. We show an estimate of the radio efficiency for inclined showers with focus on the benefits of measurements with vertically aligned antennas and we present the direction dependent noise in the different polarizations.

astro-ph.IM↗

Results from the KASCADE-Grande Data Analysis

KASCADE-Grande and its original array of KASCADE were dedicated to measure individual air showers of cosmic rays with great detail in the primary energy range of 100 TeV up to 1 EeV. The experiment has significantly contributed to investigations of the energy spectrum and chemical composition of cosmic rays in the transition region from galactic to extragalactic origin of cosmic rays as well as to the further development of hadronic interaction models through validity tests using the multi-detector information from KASCADE-Grande. Though the data accumulation was completed in 2013, the data analysis is still continuing. Recently, we investigate the reliability of the new hadronic interactions model of the Sibyll version 2.3d with the combined data from KASCADE and KASCADE-Grande, and compare it to the predictions of different hadronic interaction models. In addition, we update the web-based platform of the KASCADE Cosmic Ray Data Centre (KCDC), where now full datasets from KASCADE and KASCADE-Grande and the corresponding Monte-Carlo simulated events are available.

astro-ph.HE↗

Depth of shower maximum and mass composition of cosmic rays from 50 PeV to 2 EeV measured with the LOFAR radio telescope

We present an updated cosmic-ray mass composition analysis in the energy range $10^{16.8}$ to $10^{18.3}$ eV from 334 air showers measured with the LOFAR radio telescope, and selected for minimal bias. In this energy range, the origin of cosmic rays is expected to shift from galactic to extragalactic sources. The analysis is based on an improved method to infer the depth of maximum $X_{\rm max}$ of extensive air showers from radio measurements and air shower simulations. We show results of the average and standard deviation of $X_{\rm max}$ versus primary energy, and analyze the $X_{\rm max}$-dataset at distribution level to estimate the cosmic ray mass composition. Our approach uses an unbinned maximum likelihood analysis, making use of existing parametrizations of $X_{\rm max}$-distributions per element. The analysis has been repeated for three main models of hadronic interactions. Results are consistent with a significant light-mass fraction, at best fit $23$ to $39$ $\%$ protons plus helium, depending on the choice of hadronic interaction model. The fraction of intermediate-mass nuclei dominates. This confirms earlier results from LOFAR, with systematic uncertainties on $X_{\rm max}$ now lowered to 7 to $9$ $\mathrm{g/cm^2}$. We find agreement in mass composition compared to results from Pierre Auger Observatory, within statistical and systematic uncertainties. However, in line with earlier LOFAR results, we find a slightly lower average $X_{\rm max}$. The values are in tension with those found at Pierre Auger Observatory, but agree with results from other cosmic ray observatories based in the Northern hemisphere.

astro-ph.HE↗

Final results of the LOPES radio interferometer for cosmic-ray air showers

LOPES, the LOFAR prototype station, was an antenna array for cosmic-ray air showers operating from 2003 - 2013 within the KASCADE-Grande experiment. Meanwhile, the analysis is finished and the data of air-shower events measured by LOPES are available with open access in the KASCADE Cosmic Ray Data Center (KCDC). This article intends to provide a summary of the achievements, results, and lessons learned from LOPES. By digital, interferometric beamforming the detection of air showers became possible in the radio-loud environment of the Karlsruhe Institute of Technology (KIT). As a prototype experiment, LOPES tested several antenna types, array configurations and calibration techniques, and pioneered analysis methods for the reconstruction of the most important shower parameters, i.e., the arrival direction, the energy, and mass-dependent observables such as the position of the shower maximum. In addition to a review and update of previously published results, we also present new results based on end-to-end simulations including all known instrumental properties. For this, we applied the detector response to radio signals simulated with the CoREAS extension of CORSIKA, and analyzed them in the same way as measured data. Thus, we were able to study the detector performance more accurately than before, including some previously inaccessible features such as the impact of noise on the interferometric cross-correlation beam. These results led to several improvements, which are documented in this paper and can provide useful input for the design of future cosmic-ray experiments based on the digital radio-detection technique.

astro-ph.HE↗

On the cosmic-ray energy scale of the LOFAR radio telescope

Cosmic rays are routinely measured at LOFAR, both with a dense array of antennas and with the LOFAR Radboud air shower Array (LORA) which is an array of plastic scintillators. In this paper, we present two results relating to the cosmic-ray energy scale of LOFAR. First, we present the reconstruction of cosmic-ray energy using radio and particle techniques along with a discussion of the event-by-event and absolute scale uncertainties. The resulting energies reconstructed with each method are shown to be in good agreement, and because the radio-based reconstructed energy has smaller uncertainty on an event-to-event basis, LOFAR analyses will use that technique in the future. Second, we present the radiation energy of air showers measured at LOFAR and demonstrate how radiation energy can be used to compare the energy scales of different experiments. The radiation energy scales quadratically with the electromagnetic energy in an air shower, which can in turn be related to the energy of the primary particle. Once the local magnetic field is accounted for, the radiation energy allows for a direct comparison between the LORA particle-based energy scale and that of the Pierre Auger Observatory. They are shown to agree to within (6$\pm$20)% for a radiation energy of 1 MeV, where the uncertainty on the comparison is dominated by the antenna calibrations of each experiment. This study motivates the development of a portable radio array which will be used to cross-calibrate the energy scales of different experiments using radiation energy and the same antennas, thereby significantly reducing the uncertainty on the comparison.

astro-ph.HE↗

The initial stage of cloud lightning imaged in high-resolution

With LOFAR we have been able to image the development of lightning flashes with meter-scale accuracy and unprecedented detail. We discuss the primary steps behind our most recent lightning mapping method. To demonstrate the capabilities of our technique we show and interpret images of the first few milliseconds of two intra-cloud flashes. In all our flashes the negative leaders propagate in the charge layer below the main negative charge. Among several interesting features we show that in about 2~ms after initiation the Primary Initial Leader triggers the formation of a multitude (more than ten) negative leaders in a rather confined area of the atmosphere. From these only one or two continue to propagate after about 30~ms to extend over kilometers horizontally while another may propagate back to the initiation point. We also show that normal negative leaders can transition into an initial-leader like state, potentially in the presence of strong electric fields. In addition, we show some initial breakdown pulses that occurred during the primary initial leader, and even during two "secondary" initial leaders that developed out of stepped leaders.

physics.ao-ph↗