arXiv subjects

J. Rault

Publications and source records attributed to J. Rault.

10 recordsLinked to original sources

arXiv2021

Coexistence of ferromagnetism and spin-orbit coupling by incorporation of platinum in two-dimensional VSe$_2$

We report on a novel material, namely two-dimensional (2D) V$_{1-x}$Pt$_x$Se$_2$ alloy, exhibiting simultaneously ferromagnetic order and Rashba spin-orbit coupling. While ferromagnetism is absent in 1T-VSe$_2$ due to the competition with the charge density wave phase, we demonstrate theoretically and experimentally that the substitution of vanadium by platinum in VSe$_2$ (10-50 %) to form an homogeneous 2D alloy restores ferromagnetic order with Curie temperatures of 6 K for 5 monolayers and 25 K for one monolayer of V$_{0.65}$Pt$_{0.35}$Se$_2$. Moreover, the presence of platinum atoms gives rise to Rashba spin-orbit coupling in (V,Pt)Se$_2$ providing an original platform to study the interplay between ferromagnetism and spin-orbit coupling in the 2D limit.

cond-mat.mtrl-sci↗

arXiv2020

Photoemission study on pristine and Ni-doped SrTiO$_{3}$ thin films

We combined photoelemission spectroscopy with first-principle calculations to investigate structural and electronic properties of SrTiO$_{3}$ doped with Ni impurities. In SrTiO$_{3}$ polycrystalline thin films, grown by magnetron sputtering, the mean size of the crystallites increases with the concentration of Ni. To determine the electronic band structure of SrTiO$_{3}$ films doped with Ni, high quality ordered pristine and SrTiO3:Ni$_{x}$ films with x=0.06 and 0.12 were prepared by pulsed laser deposition. Electronic band structure calculations for the ground state, as well as one-step model photoemission calculations, which were obtained by means of the Korringa-Khon-Rostoker Greens's function method, predicted the formation of localised $3d$-impurity bands in the band gap of SrTiO$_{3}$ close to the valence band maxima. The measured valence bands at the resonance Ni2p excitation and band dispersion confirm these findings.

cond-mat.mtrl-sci↗

arXiv2019

Ultra-low magnetic damping in Co 2 Mn-based Heusler compounds: promising materials for spintronic

The prediction of ultra-low magnetic damping in Co 2 MnZ Heusler half-metal thin-film magnets is explored in this study and the damping response is shown to be linked to the underlying electronic properties. By substituting the Z elements in high crystalline quality films (Co 2 MnZ with Z=Si, Ge, Sn, Al, Ga, Sb), electronic properties such as the minority spin band gap, Fermi energy position in the gap and spin polarization can be tuned and the consequence on magnetization dynamics analyzed. The experimental results allow us to directly explore the interplay of spin polarization, spin gap, Fermi energy position and the magnetic damping obtained in these films, together with ab initio calculation predictions. The ultra-low magnetic damping coefficients measured in the range 4.1 10-4-9 10-4 for Co 2 MnSi, Ge, Sn, Sb are the lowest values obtained on a conductive layer and offers a clear experimental demonstration of theoretical predictions on Half-Metal Magnetic Heusler compounds and a pathway for future materials design.

cond-mat.mtrl-sci↗

arXiv2019

Hard x-ray standing-wave photoemission insights into the structure of an epitaxial Fe/MgO multilayer magnetic tunnel junction

The Fe/MgO magnetic tunnel junction is a classic spintronic system, with current importance technologically, and interest for future innovation. The key magnetic properties are linked directly to the structure of hard-to-access buried interfaces, and the Fe and MgO components near the surface are unstable when exposed to air, making a deeper probing, non-destructive, in-situ measurement ideal for this system. We have thus applied hard x-ray photoemission spectroscopy (HXPS) and standing-wave (SW) HXPS in the few keV energy range to probe the structure of an epitaxially-grown MgO/Fe superlattice. The superlattice consists of 9 repeats of MgO grown on Fe by magnetron sputtering on an MgO (001) substrate, with a protective Al2O3 capping layer. We determine through SW-HXPS that 8 of the 9 repeats are similar and ordered, with a period of 33 $\pm$ 4 angstrom, with minor presence of FeO at the interfaces and a significantly distorted top bilayer with ca. 3 times the oxidation of the lower layers at the top MgO/Fe interface. There is evidence of asymmetrical oxidation on the top and bottom of the Fe layers. We find agreement with dark-field scanning transmission electron microscope (STEM) and x-ray reflectivity measurements. Through the STEM measurements we confirm an overall epitaxial stack with dislocations and warping at the interfaces of ca. 5 angstrom. We also note a distinct difference in the top bilayer, especially MgO, with possible Fe inclusions. We thus demonstrate that SW-HXPS can be used to probe deep buried interfaces of novel magnetic devices with few angstrom precision.

cond-mat.mtrl-sci↗

arXiv2019

Electronic band structure of ultimately thin silicon oxide on Ru(0001)

Silicon oxide can be formed in a crystalline form, when prepared on a metallic substrate. It is a candidate support catalyst and possibly the ultimately-thin version of a dielectric host material for two-dimensional materials (2D) and heterostructures. We determine the atomic structure and chemical bonding of the ultimately thin version of the oxide, epitaxially grown on Ru(0001). In particular, we establish the existence of two sub-lattices defined by metal-oxygen-silicon bridges involving inequivalent substrate sites. We further discover four electronic bands below Fermi level, at high binding energies, two of them forming a Dirac cone at K point, and two others forming semi-flat bands. While the latter two correspond to hybridized states between the oxide and the metal, the former relate to the topmost silicon-oxygen plane, which is not directly coupled to the substrate. Our analysis is based on high resolution X-ray photoelectron spectroscopy, angle-resolved photoemission spectroscopy, scanning tunneling microscopy, and density functional theory calculations.

cond-mat.mtrl-sci↗

arXiv2018

Coherent and incoherent bands in La and Rh doped Sr3Ir2O7

In Sr2IrO4 and Sr3Ir2O7, correlations, magnetism and spin-orbit coupling compete on similar energy scales, creating a new context to study metal-insulator transitions (MIT). We use here Angle-Resolved photoemission to investigate the MIT as a function of hole and electron doping in Sr3Ir2O7, obtained respectively by Ir/Rh and Sr/La substitutions. We show that there is a clear reduction as a function of doping of the gap between a lower and upper band on both sides of the Fermi level, from 0.2eV to 0.05eV. Although these two bands have a counterpart in band structure calculations, they are characterized by a very different degree of coherence. The upper band exhibits clear quasiparticle peaks, while the lower band is very broad and loses weight as a function of doping. Moreover, their ARPES spectral weights obey different periodicities, reinforcing the idea of their different nature. We argue that a very similar situation occurs in Sr2IrO4 and conclude that the physics of the two families is essentially the same.

cond-mat.str-el↗

arXiv2018

Influence of the ferroelectric polarization on the electronic structure of BaTiO3 thin films

Micrometric domains of precise ferroelectric polarization have been written into a 20 nm thick epitaxial thin film of BaTiO3(001) (BTO) on a Nb doped SrTiO3 (STO) substrate using PiezoForce Microscopy (PFM). The domain dependent electronic structure has been studied using fully energy-filtered PhotoEmission Microscopy (PEEM) and synchrotron radiation. Shifts, induced by ferroelectric polarization, of up to 300 meV are observed in the work function of the sample. The surface is Ba-O terminated. Polarization-induced distortion of the electronic structure is observed in the valence band and on the Ba 3d, Ti 2p and O 1s core levels of BTO. Polarization dependent surface adsorption is observed. A simple electrostatic model based on net surface charge is not sufficient to explain the observed modifications in the electronic levels.

cond-mat.mtrl-sci↗

arXiv2017

The structure and evolution of semiconducting buffer graphene grown on SiC(0001)

Using highly controlled coverages of graphene on SiC(0001), we have studied the structure of the first graphene layer that grows on the SiC interface. This layer, known as the buffer layer, is semiconducting. Using x-ray reflectivity and x-ray standing waves analysis we have performed a comparative study of the buffer layer structure with and without an additional monolayer graphene layer above it. We show that no more than 26\% of the buffer carbon is covalently bonded to Si in the SiC interface. We also show that the top SiC bilayer is Si depleted and is the likely the cause of the incommensuration previously observed in this system. When a monolayer graphene layer forms above the buffer, the buffer layer becomes less corrugated with signs of a change in the bonding geometry with the SiC interface. At the same time, the entire SiC interface becomes more disordered, presumably due to entropy associated with the higher growth temperature.

cond-mat.mtrl-sci↗

arXiv2015

Observation by resonant angle-resolved photoemission of a critical thickness for 2-dimensional electron gas formation in SrTiO$_3$ embedded in GdTiO$_3$

For certain conditions of layer thickness, the interface between GdTiO$_3$ (GTO) and SrTiO$_3$ (STO) in multilayer samples has been found to form a two-dimensional electron gas (2DEG) with very interesting properties including high mobilities and ferromagnetism. We have here studied two trilayer samples of the form [2 nm GTO/1.0 or 1.5 unit cells STO/10 nm GTO] as grown on (001) (LaAlO$_3$)$_{0.3}$(Sr$_2$AlTaO$_6$)$_{0.7}$ (LSAT), with the STO layer thicknesses being at what has been suggested is the critical thickness for 2DEG formation. We have studied these with Ti-resonant angle-resolved (ARPES) and angle-integrated photoemission and find that the spectral feature in the spectra associated with the 2DEG is present in the 1.5 unit cell sample, but not in the 1.0 unit cell sample. We also observe through core-level spectra additional states in Ti and Sr, with the strength of a low-binding-energy state for Sr being associated with the appearance of the 2DEG, and we suggest it to have an origin in final-state core-hole screening.

cond-mat.mtrl-sci↗

arXiv2011

Microscopic correlation between chemical and electronic states in epitaxial graphene on SiC(000-1)

We present energy filtered electron emission spectromicroscopy with spatial and wave-vector resolution on few layer epitaxial graphene on SiC$(000-1) grown by furnace annealing. Low energy electron microscopy shows that more than 80% of the sample is covered by 2-3 graphene layers. C1s spectromicroscopy provides an independent measurement of the graphene thickness distribution map. The work function, measured by photoelectron emission microscopy (PEEM), varies across the surface from 4.34 to 4.50eV according to both the graphene thickness and the graphene-SiC interface chemical state. At least two SiC surface chemical states (i.e., two different SiC surface structures) are present at the graphene/SiC interface. Charge transfer occurs at each graphene/SiC interface. K-space PEEM gives 3D maps of the k_|| pi - pi* band dispersion in micron scale regions show that the Dirac point shifts as a function of graphene thickness. Novel Bragg diffraction of the Dirac cones via the superlattice formed by the commensurately rotated graphene sheets is observed. The experiments underline the importance of lateral and spectroscopic resolution on the scale of future electronic devices in order to precisely characterize the transport properties and band alignments.

cond-mat.mtrl-sci↗