arXiv subjects

J. Richard Shaw

Publications and source records attributed to J. Richard Shaw.

At least 19 recordsLinked to original sources

arXiv2026

Detection of the Cosmological 21 cm Signal in Auto-correlation at z ~ 1 with the Canadian Hydrogen Intensity Mapping Experiment

We present the first detection of the cosmological 21 cm intensity mapping signal in auto-correlation at z ~ 1 with the Canadian Hydrogen Intensity Mapping Experiment (CHIME). Using 94 nights of observation, we have measured the 21 cm auto-power spectrum over a frequency range from 608.2 MHz to 707.8 MHz (z = 1.34 to 1.01) at 0.4 h Mpc^-1 < k < 1.5 h Mpc^-1, with a detection significance of 12.5 sigma. Our analysis employs significant improvements to the CHIME data processing pipeline compared to previous work, including novel radio frequency interference (RFI) detection and masking algorithms, achromatic beamforming techniques, and foreground filtering before time averaging to minimize spectral leakage. We establish the robustness and reliability of our detection through a comprehensive suite of validation tests. We also measure the 21 cm signal in two independent sub-bands centered at z ~ 1.08 and z ~ 1.24 with detection significance of 8.7 sigma and 9.2 sigma, respectively. We briefly discuss the theoretical interpretation of these measurements in terms of a power spectrum model, deferring the details to a companion paper. This auto-power spectrum detection demonstrates CHIME's capability to probe large-scale structure through 21 cm intensity mapping without reliance on external galaxy surveys.

astro-ph.CO↗

arXiv2026

Discovery of a 21 cm absorption system at z=2.327 with CHIME

We report the detection of a new 21 cm absorption system associated with the radio source NVSS J164725+375218 at a redshift of z=2.327, identified through a pilot survey conducted by the Canadian Hydrogen Intensity Mapping Experiment (CHIME). This is the fifth detection of an associated system at z > 2. By analyzing a subset of available data, we conduct a spectrally blind survey for 21 cm absorption systems within the redshift range of 0.78 to 2.55 along 202 lines of sight toward known sources in the declination range of 35 to 60 degrees. We detect three 21 cm absorbers: two previously known intervening systems and one newly discovered associated system. By fitting the absorption profiles with models containing one to three Gaussian components and selecting the best model using the Bayesian information criterion, we estimate the optical depth, velocity-integrated optical depth, and the ratio between the HI column density and the spin temperature of the absorption systems. These results demonstrate CHIME's ability to discover new absorbers, even in a small subset of its full dataset.

astro-ph.GA↗

arXiv2025

Beam Maps of the Canadian Hydrogen Intensity Mapping Experiment (CHIME) Measured with a Drone

We present beam measurements of the CHIME telescope using a radio calibration source deployed on a drone payload. During test flights, the pulsing calibration source and the telescope were synchronized to GPS time, enabling in-situ background subtraction for the full $N^{2}$ visibility matrix for one CHIME cylindrical reflector. We use the autocorrelation products to estimate the primary beam width and centroid location, and compare these quantities to solar transit measurements and holographic measurements where they overlap on the sky. We find that the drone, solar, and holography data have similar beam parameter evolution across frequency and both spatial coordinates. This paper presents the first drone-based beam measurement of a large cylindrical radio interferometer. Furthermore, the unique analysis and instrumentation described in this paper lays the foundation for near-field measurements of experiments like CHIME.

astro-ph.IM↗

arXiv2024

Faraday tomography with CHIME: the `tadpole' feature G137+7

A direct consequence of Faraday rotation is that the polarized radio sky does not resemble the total intensity sky at long wavelengths. We analyze G137+7, which is undetectable in total intensity but appears as a depolarization feature. We use the first polarization maps from the Canadian Hydrogen Intensity Mapping Experiment. Our $400-729$ MHz bandwidth and angular resolution, $17'$ to $30'$, allow us to use Faraday synthesis to analyze the polarization structure. In polarized intensity and polarization angle maps, we find a "tail" extending $10^\circ$ from the "head" and designate the combined object the "tadpole". Similar polarization angles, distinct from the background, indicate that the head and tail are physically associated. The head appears as a depolarized ring in single channels, but wideband observations show that it is a Faraday rotation feature. Our investigations of H I and H$α$ find no connections to the tadpole. The tail suggests motion of either the gas or an ionizing star through the ISM; the B2(e) star HD 20336 is a candidate. While the head features a coherent, $\sim -8$ rad m$^2$ Faraday depth, Faraday synthesis also identifies multiple components in both the head and tail. We verify the locations of the components in the spectra using QU fitting. Our results show that $\sim$octave-bandwidth Faraday rotation observations at $\sim 600$ MHz are sensitive to low-density ionized or partially-ionized gas which is undetectable in other tracers.

astro-ph.GA↗

arXiv2024

CHIME/FRB Outriggers: KKO Station System and Commissioning Results

Localizing fast radio bursts (FRBs) to their host galaxies is an essential step to better understanding their origins and using them as cosmic probes. The CHIME/FRB Outrigger program aims to add VLBI-localization capabilities to CHIME, such that FRBs may be localized to tens of milliarcsecond precision at the time of their discovery, more than sufficient for host galaxy identification. The first-built outrigger telescope is KKO, located 66 kilometers west of CHIME. Cross-correlating KKO with CHIME can achieve arcsecond-scale localization in right ascension while avoiding the worst effects of the ionosphere. This paper presents measurements of KKO's performance throughout its commissioning phase, as well as a summary of its design and function. We demonstrate KKO's capabilities as a standalone instrument by producing full-sky images, mapping the angular and frequency structure of the primary beam, and measuring feed positions. To demonstrate the localization capabilities of the CHIME -- KKO baseline, we collected five separate observations each for a set of twenty bright pulsars, and aimed to measure their positions to within 5~arcseconds. All of these pulses were successfully localized to within this specification. The next two outriggers are expected to be commissioned in 2024, and will enable subarcsecond localizations for approximately hundreds of FRBs each year.

astro-ph.IM↗

arXiv2023

A Detection of Cosmological 21 cm Emission from CHIME in Cross-correlation with eBOSS Measurements of the Lyman-$α$ Forest

We report the detection of 21 cm emission at an average redshift $\bar{z} = 2.3$ in the cross-correlation of data from the Canadian Hydrogen Intensity Mapping Experiment (CHIME) with measurements of the Lyman-$α$ forest from eBOSS. Data collected by CHIME over 88 days in the $400-500$~MHz frequency band ($1.8 < z < 2.5$) are formed into maps of the sky and high-pass delay filtered to suppress the foreground power, corresponding to removing cosmological scales with $k_\parallel \lesssim 0.13\ \text{Mpc}^{-1}$ at the average redshift. Line-of-sight spectra to the eBOSS background quasar locations are extracted from the CHIME maps and combined with the Lyman-$α$ forest flux transmission spectra to estimate the 21 cm-Lyman-$α$ cross-correlation function. Fitting a simulation-derived template function to this measurement results in a $9σ$ detection significance. The coherent accumulation of the signal through cross-correlation is sufficient to enable a detection despite excess variance from foreground residuals $\sim6-10$ times brighter than the expected thermal noise level in the correlation function. These results are the highest-redshift measurement of \tcm emission to date, and set the stage for future 21 cm intensity mapping analyses at $z>1.8$.

astro-ph.CO↗

arXiv2023

The First CHIME/FRB Fast Radio Burst Catalog

We present a catalog of 536 fast radio bursts (FRBs) detected by the Canadian Hydrogen Intensity Mapping Experiment Fast Radio Burst (CHIME/FRB) Project between 400 and 800 MHz from 2018 July 25 to 2019 July 1, including 62 bursts from 18 previously reported repeating sources. The catalog represents the first large sample, including bursts from repeaters and non-repeaters, observed in a single survey with uniform selection effects. This facilitates comparative and absolute studies of the FRB population. We show that repeaters and apparent non-repeaters have sky locations and dispersion measures (DMs) that are consistent with being drawn from the same distribution. However, bursts from repeating sources differ from apparent non-repeaters in intrinsic temporal width and spectral bandwidth. Through injection of simulated events into our detection pipeline, we perform an absolute calibration of selection effects to account for systematic biases. We find evidence for a population of FRBs - comprising a large fraction of the overall population - with a scattering time at 600 MHz in excess of 10 ms, of which only a small fraction are observed by CHIME/FRB. We infer a power-law index for the cumulative fluence distribution of $α=-1.40\pm0.11(\textrm{stat.})^{+0.06}_{-0.09}(\textrm{sys.})$, consistent with the $-3/2$ expectation for a non-evolving population in Euclidean space. We find $α$ is steeper for high-DM events and shallower for low-DM events, which is what would be expected when DM is correlated with distance. We infer a sky rate of $[525\pm30(\textrm{stat.})^{+140}_{-130}({\textrm{sys.}})]/\textrm{sky}/\textrm{day}$ above a fluence of 5 Jy ms at 600 MHz, with scattering time at $600$ MHz under 10 ms, and DM above 100 pc cm$^{-3}$.

astro-ph.HE↗

arXiv2022

Characterization of the John A. Galt telescope for radio holography with CHIME

The Canadian Hydrogen Intensity Mapping Experiment (CHIME) will measure the 21 cm emission of astrophysical neutral hydrogen to probe large scale structure at redshifts z=0.8-2.5. However, detecting the 21 cm signal beneath substantially brighter foregrounds remains a key challenge. Due to the high dynamic range between 21 cm and foreground emission, an exquisite calibration of instrument systematics, notably the telescope beam, is required to successfully filter out the foregrounds. One technique being used to achieve a high fidelity measurement of the CHIME beam is radio holography, wherein signals from each of CHIME's analog inputs are correlated with the signal from a co-located reference antenna, the 26 m John A. Galt telescope, as the 26 m Galt telescope tracks a bright point source transiting over CHIME. In this work we present an analysis of several of the Galt telescope's properties. We employ driftscan measurements of several bright sources, along with background estimates derived from the 408 MHz Haslam map, to estimate the Galt system temperature. To determine the Galt telescope's beam shape, we perform and analyze a raster scan of the bright radio source Cassiopeia A. Finally, we use early holographic measurements to measure the Galt telescope's geometry with respect to CHIME for the holographic analysis of the CHIME and Galt interferometric data set.

astro-ph.IM↗

arXiv2022

Sub-second periodicity in a fast radio burst

Fast radio bursts (FRBs) are millisecond-duration flashes of radio waves that are visible at distances of billions of light-years. The nature of their progenitors and their emission mechanism remain open astrophysical questions. Here we report the detection of the multi-component FRB 20191221A and the identification of a periodic separation of 216.8(1) ms between its components with a significance of 6.5 sigmas. The long (~3 s) duration and nine or more components forming the pulse profile make this source an outlier in the FRB population. Such short periodicity provides strong evidence for a neutron-star origin of the event. Moreover, our detection favours emission arising from the neutron-star magnetosphere, as opposed to emission regions located further away from the star, as predicted by some models.

astro-ph.HE↗

arXiv2022

An Overview of CHIME, the Canadian Hydrogen Intensity Mapping Experiment

The Canadian Hydrogen Intensity Mapping Experiment (CHIME) is a drift scan radio telescope operating across the 400-800 MHz band. CHIME is located at the Dominion Radio Astrophysical Observatory near Penticton, BC Canada. The instrument is designed to map neutral hydrogen over the redshift range 0.8 to 2.5 to constrain the expansion history of the Universe. This goal drives the design features of the instrument. CHIME consists of four parallel cylindrical reflectors, oriented north-south, each 100 m $\times$ 20 m and outfitted with a 256 element dual-polarization linear feed array. CHIME observes a two degree wide stripe covering the entire meridian at any given moment, observing 3/4 of the sky every day due to Earth rotation. An FX correlator utilizes FPGAs and GPUs to digitize and correlate the signals, with different correlation products generated for cosmological, fast radio burst, pulsar, VLBI, and 21 cm absorber backends. For the cosmology backend, the $N_\mathrm{feed}^2$ correlation matrix is formed for 1024 frequency channels across the band every 31 ms. A data receiver system applies calibration and flagging and, for our primary cosmological data product, stacks redundant baselines and integrates for 10 s. We present an overview of the instrument, its performance metrics based on the first three years of science data, and we describe the current progress in characterizing CHIME's primary beam response. We also present maps of the sky derived from CHIME data; we are using versions of these maps for a cosmological stacking analysis as well as for investigation of Galactic foregrounds.

astro-ph.IM↗

arXiv2022

Using the Sun to Measure the Primary Beam Response of the Canadian Hydrogen Intensity Mapping Experiment

We present a beam pattern measurement of the Canadian Hydrogen Intensity Mapping Experiment (CHIME) made using the Sun as a calibration source. As CHIME is a pure drift scan instrument, we rely on the seasonal North-South motion of the Sun to probe the beam at different elevations. This semiannual range in elevation, combined with the radio brightness of the Sun, enables a beam measurement which spans ~7,200 square degrees on the sky without the need to move the telescope. We take advantage of observations made near solar minimum to minimize the impact of solar variability, which is observed to be <10% in intensity over the observation period. The resulting data set is highly complementary to other CHIME beam measurements -- both in terms of angular coverage and systematics -- and plays an important role in the ongoing program to characterize the CHIME primary beam.

astro-ph.IM↗

arXiv2022

On the use of CHIME to Detect Long-Duration Radio Transients from Neutron Star Mergers

Short gamma-ray burst (SGRB) GRB 170817A was found to be related to a binary neutron star (BNS) merger. It is uncertain whether all SGRBs are caused by BNS mergers, and also under what conditions a BNS merger can cause a SGRB. As BNS mergers can cause SGRBs, afterglow observations will also provide an alternative measurement of the BNS merger rate independent of gravitational-wave observations. In previous work by Feng et al. (2014), the feasibility of the detection of afterglows was considered using a variety of radio observatories and a simple flux threshold detection algorithm. Here, we consider a more sophisticated detection algorithm for SGRB afterglows, and provide an estimate of the trials factors for a realistic search to obtain an updated estimate of the possibility of observing afterglows with the Canadian Hydrogen Intensity Mapping Experiment (CHIME). We estimate 893 and 312 afterglows per year can be detected using a $3 σ$ confidence level threshold with two jet models, one with half opening angle uniformly distributed in $6^\circ$ to $30^\circ$ and the other uniformly distributed in $3^\circ$ to $8^\circ$ with the median $6^\circ$. We also find 88% and 98%, respectively, of the detectable afterglows for each jet opening distribution are off-axis, which are candidates for orphan afterglows. Our result predicts fewer detectable sources per year than the earlier analysis, but confirms the essential conclusion that using CHIME to search for afterglows will be effective at constraining the astrophysical merger rate.

astro-ph.HE↗

arXiv2022

Detection of Cosmological 21 cm Emission with the Canadian Hydrogen Intensity Mapping Experiment

We present a detection of 21-cm emission from large-scale structure (LSS) between redshift 0.78 and 1.43 made with the Canadian Hydrogen Intensity Mapping Experiment (CHIME). Radio observations acquired over 102 nights are used to construct maps which are foreground filtered and stacked on the angular and spectral locations of luminous red galaxies (LRG), emission line galaxies (ELG), and quasars (QSO) from the eBOSS clustering catalogs. We find decisive evidence for a detection when stacking on all three tracers of LSS, with the logarithm of the Bayes Factor equal to 18.9 (LRG), 10.8 (ELG), and 56.3 (QSO). An alternative frequentist interpretation, based on the likelihood-ratio test, yields a detection significance of $7.1σ$ (LRG), $5.7σ$ (ELG), and $11.1σ$ (QSO). These are the first 21-cm intensity mapping measurements made with an interferometer. We constrain the effective clustering amplitude of neutral hydrogen (HI), defined as $\mathcal{A}_{\rm HI}\equiv 10^{3}\,Ω_\mathrm{HI}\left(b_\mathrm{HI}+\langle\,fμ^{2}\rangle\right)$, where $Ω_\mathrm{HI}$ is the cosmic abundance of HI, $b_\mathrm{HI}$ is the linear bias of HI, and $\langle\,fμ^{2}\rangle=0.552$ encodes the effect of redshift-space distortions at linear order. We find $\mathcal{A}_\mathrm{HI}=1.51^{+3.60}_{-0.97}$ for LRGs $(z=0.84)$, $\mathcal{A}_\mathrm{HI}=6.76^{+9.04}_{-3.79}$ for ELGs $(z=0.96)$, and $\mathcal{A}_\mathrm{HI}=1.68^{+1.10}_{-0.67}$ for QSOs $(z=1.20)$, with constraints limited by modeling uncertainties at nonlinear scales. We are also sensitive to bias in the spectroscopic redshifts of each tracer, and find a non-zero bias $Δ\,v= -66 \pm 20 \mathrm{km/s}$ for the QSOs. We split the QSO catalog into three redshift bins and have a decisive detection in each, with the upper bin at $z=1.30$ producing the highest redshift 21-cm intensity mapping measurement thus far.

astro-ph.CO↗

arXiv2022

The Hydrogen Intensity and Real-time Analysis eXperiment: 256-Element Array Status and Overview

The Hydrogen Intensity and Real-time Analysis eXperiment (HIRAX) is a radio interferometer array currently in development, with an initial 256-element array to be deployed at the South African Radio Astronomy Observatory (SARAO) Square Kilometer Array (SKA) site in South Africa. Each of the 6m, $f/0.23$ dishes will be instrumented with dual-polarisation feeds operating over a frequency range of 400-800 MHz. Through intensity mapping of the 21 cm emission line of neutral hydrogen, HIRAX will provide a cosmological survey of the distribution of large-scale structure over the redshift range of $0.775 < z < 2.55$ over $\sim$15,000 square degrees of the southern sky. The statistical power of such a survey is sufficient to produce $\sim$7 percent constraints on the dark energy equation of state parameter when combined with measurements from the Planck satellite. Additionally, HIRAX will provide a highly competitive platform for radio transient and HI absorber science while enabling a multitude of cross-correlation studies. In this paper, we describe the science goals of the experiment, overview of the design and status of the sub-components of the telescope system, and describe the expected performance of the initial 256-element array as well as the planned future expansion to the final, 1024-element array.

astro-ph.IM↗

arXiv2020

Packed Ultra-wideband Mapping Array (PUMA): Astro2020 RFI Response

The Packed Ultra-wideband Mapping Array (PUMA) is a proposed low-resolution transit interferometric radio telescope operating over the frequency range 200 - 1100MHz. Its rich science portfolio will include measuring structure in the universe from redshift z = 0.3 to 6 using 21cm intensity mapping, detecting one million fast radio bursts, and monitoring thousands of pulsars. It will allow PUMA to advance science in three different areas of physics (the physics of dark energy, the physics of cosmic inflation and time-domain astrophysics). This document is a response to a request for information (RFI) by the Panel on Radio, Millimeter, and Submillimeter Observations from the Ground (RMS) of the Decadal Survey on Astronomy and Astrophysics 2020. We present the science case of PUMA, the development path and major risks to the project.

astro-ph.IM↗

arXiv2019

Data Analysis for Precision 21 cm Cosmology

The redshifted 21 cm line is an emerging tool in cosmology, in principle permitting three-dimensional surveys of our Universe that reach unprecedentedly large volumes, previously inaccessible length scales, and hitherto unexplored epochs of our cosmic timeline. Large radio telescopes have been constructed for this purpose, and in recent years there has been considerable progress in transforming 21 cm cosmology from a field of considerable theoretical promise to one of observational reality. Increasingly, practitioners in the field are coming to the realization that the success of observational 21cm cosmology will hinge on software algorithms and analysis pipelines just as much as it does on careful hardware design and telescope construction. This review provides a pedagogical introduction to state-of-the-art ideas in 21 cm data analysis, covering a wide variety of steps in a typical analysis pipeline, from calibration to foreground subtraction to mapmaking to power spectrum estimation to parameter estimation.

astro-ph.IM↗

arXiv2019

Inflation and Early Dark Energy with a Stage II Hydrogen Intensity Mapping Experiment

This white paper envisions a revolutionary post-DESI, post-LSST dark energy program based on intensity mapping of the redshifted 21cm emission line from neutral hydrogen at radio frequencies. The proposed intensity mapping survey has the unique capability to quadruple the volume of the Universe surveyed by optical programs, provide a percent-level measurement of the expansion history to $z \sim 6$, open a window to explore physics beyond the concordance $Λ$CDM model, and to significantly improve the precision on standard cosmological parameters. In addition, characterization of dark energy and new physics will be powerfully enhanced by cross-correlations with optical surveys and cosmic microwave background measurements. The rich dataset obtained by the proposed intensity mapping instrument will be simultaneously useful in exploring the time-domain physics of fast radio transients and pulsars, potentially in live "multi-messenger" coincidence with other observatories. The core dark energy/inflation science advances enabled by this program are the following: (i) Measure the expansion history of the universe over $z=0.3-6$ with a single instrument, extending the range deep into the pre-acceleration era, providing an unexplored window for new physics; (ii) Measure the growth rate of structure in the universe over the same redshift range; (iii) Observe, or constrain, the presence of inflationary relics in the primordial power spectrum, improving existing constraints by an order of magnitude; (iv) Observe, or constrain, primordial non-Gaussianity with unprecedented precision, improving constraints on several key numbers by an order of magnitude. Detailed mapping of the enormous, and still largely unexplored, volume of cosmic space will thus provide unprecedented information on fundamental questions of the vacuum energy and early-universe physics.

astro-ph.CO↗

arXiv2019

Packed Ultra-wideband Mapping Array (PUMA): A Radio Telescope for Cosmology and Transients

PUMA is a proposal for an ultra-wideband, low-resolution and transit interferometric radio telescope operating at $200-1100\,\mathrm{MHz}$. Its design is driven by six science goals which span three science themes: the physics of dark energy (measuring the expansion history and growth of the universe up to $z=6$), the physics of inflation (constraining primordial non-Gaussianity and primordial features) and the transient radio sky (detecting one million fast radio bursts and following up SKA-discovered pulsars). We propose two array configurations composed of hexagonally close-packed 6m dish arrangements with 50% fill factor. The initial 5,000 element 'petite array' is scientifically compelling, and can act as a demonstrator and a stepping stone to the full 32,000 element 'full array'. Viewed as a 21cm intensity mapping telescope, the program has the noise equivalent of a traditional spectroscopic galaxy survey comprised of 0.6 and 2.5 billion galaxies at a comoving wavenumber of $k=0.5\,h\mathrm{Mpc}^{-1}$ spanning the redshift range $z = 0.3 - 6$ for the petite and full configurations, respectively. At redshifts beyond $z=2$, the 21cm technique is a uniquely powerful way of mapping the universe, while the low-redshift range will allow for numerous cross-correlations with existing and upcoming surveys. This program is enabled by the development of ultra-wideband radio feeds, cost-effective dish construction methods, commodity radio-frequency electronics driven by the telecommunication industry and the emergence of sufficient computing power to facilitate real-time signal processing that exploits the full potential of massive radio arrays. The project has an estimated construction cost of 55 and 330 million FY19 USD for the petite and full array configurations. Including R&D, design, operations and science analysis, the cost rises to 125 and 600 million FY19 USD, respectively.

astro-ph.IM↗