SearcharxivSearch

arXiv subjects

J. Ruan

Publications and source records attributed to J. Ruan.

At least 19 recordsLinked to original sources

Exoplanet Search and Characterization with the Proposed POET Canadian Space Mission

The Photometric Observations of Exoplanet Transits (POET) is a proposed micro-satellite mission dedicated to the characterization and discovery of transiting exoplanets. POET has been identified as a top priority small-sat space mission in the Canadian Astronomy Long Range Plan 2020-2030. POET is being proposed as Canada's next astronomy space mission, with launch possible in late 2029. POET is an iteration on the designs of the Canadian MOST and NEOSSat space missions, which had 15 cm-sized telescopes and observed only in the visible band pass. POET will have a larger 20 cm telescope aperture and three band passes: near-ultraviolet (nUV; 300-400 nm), visible near-infrared (VNIR; 400-900 nm), and short-wavelength infrared (SWIR; 900-1700 nm). All mission components either already have significant space heritage or are seeing rapid adoption in commercial space missions. POET's simultaneous tri-band 300-1700 nm photometric monitoring will allow it to separate the impact of star spots on the transmission spectrum of extended atmospheres on super-Earth or larger exoplanets. POET's SWIR band is optimally sensitive to the emission peak of ultracool dwarf stars and would enable a systematic search for Earth-sized planets around them. POET aims to discover some of the nearest potentially habitable Earth-sized exoplanets that could be scrutinized for biosignatures with JWST or future telescopes. Herein we present the assembly of the POET Input Catalog of Ultracool Dwarfs and simulations of the expected yield of rocky planets with POET.

astro-ph.EP

Experimental demonstration of OSC at IOTA: IOTA Run #3 Report

Optical Stochastic Cooling (OSC) is an optical-bandwidth extension of Stochastic Cooling that could advance the state-of-the-art cooling rate in beam cooling by three to four orders of magnitude [1-3]. The concept of OSC was first suggested in the early 1990s by Zolotorev, Zholents and Mikhailichenko, and replaced the microwave hardware of SC with optical analogs, such as wigglers and optical amplifiers. A number of variations on the original OSC concept have been proposed, and while a variety of proof-of-principle demonstrations and operational uses have been considered, the concept was not experimentally demonstrated up to now [4-9]. An OSC R&D program has been underway at IOTA for the past several years [4]. Run #3 of the IOTA ring, which began in Nov. 2020 and concluded in Aug. 2021, was focused on the worlds first experimental demonstration of OSC. The experimental program was successful in demonstrating and characterizing the OSC physics with the major outcomes including strong cooling in one, two and three dimensions, validation of the theoretical models of OSC and the demonstration of OSC with a single electron. This report briefly describes the activities and major milestones of the OSC program during Run #3. Detailed descriptions of the OSC theory, conceptual design and hardware elements can be found in reference [4].

physics.acc-ph

First Experimental Demonstration of Optical Stochastic Cooling

Particle accelerators and storage rings have been transformative instruments of discovery, and, for many applications, innovations in particle-beam cooling have been a principal driver of that success1. Beam cooling reduces the spread in particle positions and momenta, while keeping the number of particles constant, and combats diffusive effects, thereby enabling particle accumulation and the production and preservation of intense beams. In the case of particle colliders, cooling increases the likelihood of observing rare physics events. One of the most important conceptual and technological advances in this area was stochastic cooling (SC), which was instrumental in the discovery of the W and Z bosons at CERN and the top quark at Fermilab2-6. SC reduces the random motion of the beam particles through granular sampling and correction of the beams phase-space structure, thus bearing resemblance to a Maxwells demon. The extension of SC from the microwave regime up to optical frequencies and bandwidths has long been pursued as it could increase the achievable cooling rates by three to four orders of magnitude and provide a powerful new tool for future accelerators. First proposed nearly thirty years ago, Optical Stochastic Cooling (OSC) replaces the conventional microwave elements of SC with optical-frequency analogs and is, in principle, compatible with any species of charged-particle beam7,8. Here we describe the first experimental demonstration of OSC in a proof-of-principle experiment9 at the Fermi National Accelerator Laboratorys Integrable Optics Test Accelerator10.

physics.acc-ph

Submacropulse electron-beam dynamics correlated with higher-order modes in a Tesla-type cryomodule

Experiments were performed at the Fermilab Accelerator Science and Technology (FAST) facility to elucidate the effects of long-range wakefields (LRWs) in TESLA-type superconducting rf cavities. In particular, we investigated the higher-order modes (HOMs) generated in the eight cavities of a cryomodule (CM) due to off-axis steering with correctors located ~4 m upstream of the CM. We have observed correlated submacropulse centroid slews of a few-hundred microns and centroid oscillations at ~240 kHz in the rf BPM data after the CM. The entrance energy into the CM was 25 MeV, and the exit energy was 100 MeV with 125 pC/b and 400 pC/b in 50-bunch pulse trains. These experimental results were evaluated for machine learning training aspects which will be used to inform the commissioning plan for the Linac Coherent Light Source-II injector CM.

physics.acc-ph

Photoinjector Generation of High-Charge Magnetized Beams for Electron-Cooling Applications

Electron-cooling offers a relatively simple scheme to enable high-luminosity collisions in future electron-ion and hadron colliders. Contemplated TeV-energy hadron colliders require relativistic (sub 100 MeV) high-charge [${\cal O}(\mbox{nC})$] electron beams with a specific transverse eigenemittance partition. This paper discusses the generation of high-charge ($Q\le 3.2$~nC) 40 MeV electron bunches with eigenemittance partition consistent with requirements associated with electron-cooling option for future electron-ion colliders. The supporting experiment was performed at the FAST facility at FermiLab. The data are compared with numerical simulations and the results discussed in the context of beam requirement for future electron-ion colliders.

physics.acc-ph

Conceptual Design Report: Optical Stochastic Cooling at IOTA

The paper presents a journal version of the Design Report on the Optical Stochastic Cooling experiment to be carried out at IOTA ring in Fermilab later this year. It discusses the theory which experiment is based on, beam parameters, major requirements to the storage ring systems and technical details of the experiment implementation.

physics.acc-ph

Revealing the Origin and Cosmic Evolution of Supermassive Black Holes

The next generation of electromagnetic and gravitational wave observatories will open unprecedented windows to the birth of the first supermassive black holes. This has the potential to reveal their origin and growth in the first billion years, as well as the signatures of their formation history in the local Universe. With this in mind, we outline three key focus areas which will shape research in the next decade and beyond: (1) What were the "seeds" of the first quasars; how did some reach a billion solar masses before z$\sim7$? (2) How does black hole growth change over cosmic time, and how did the early growth of black holes shape their host galaxies? What can we learn from intermediate mass black holes (IMBHs) and dwarf galaxies today? (3) Can we unravel the physics of black hole accretion, understanding both inflows and outflows (jets and winds) in the context of the theory of general relativity? Is it valid to use these insights to scale between stellar and supermassive BHs, i.e., is black hole accretion really scale invariant? In the following, we identify opportunities for the Canadian astronomical community to play a leading role in addressing these issues, in particular by leveraging our strong involvement in the Event Horizon Telescope, the {\it James Webb Space Telescope} (JWST), Euclid, the Maunakea Spectroscopic Explorer (MSE), the Thirty Meter Telescope (TMT), the Square Kilometer Array (SKA), the Cosmological Advanced Survey Telescope for Optical and ultraviolet Research (CASTOR), and more. We also discuss synergies with future space-based gravitational wave (LISA) and X-ray (e.g., Athena, Lynx) observatories, as well as the necessity for collaboration with the stellar and galactic evolution communities to build a complete picture of the birth of supermassive black holes, and their growth and their influence over the history of the Universe.

astro-ph.GA

Commissioning and Operation of FAST Electron Linac at Fermilab

We report results of the beam commissioning and first operation of the 1.3 GHz superconducting RF electron linear accelerator at Fermilab Accelerator Science and Technology (FAST) facility. Construction of the linac was completed and the machine was commissioned with beam in 2017. The maximum total beam energy of about 300 MeV was achieved with the record energy gain of 250 MeV in the ILC-type SRF cryomodule. The photoinjector was tuned to produce trains of 200 pC bunches with a frequency of 3 MHz at a repetition rate of 1 Hz. This report describes the aspects of machine commissioning such as tuning of the SRF cryomodule and beam optics optimization. We also present highlights of an experimental program carried out parasitically during the two-month run, including studies of wake-fields, and advanced beam phase space manipulation.

physics.acc-ph

X-ray and multi-epoch optical/UV investigations of BAL to non-BAL quasar transformations

We report on an X-ray and optical/UV study of eight Broad Absorption Line (BAL) to non-BAL transforming quasars at $z\,\approx\,$1.7-2.2 over 0.29-4.95 rest-frame years with at least three spectroscopic epochs for each quasar from the SDSS, BOSS, $Gemini$, and ARC 3.5-m telescopes. New $Chandra$ observations obtained for these objects show their values of $α_{\rm ox}$ and $Δα_{\rm ox}$, as well as their spectral energy distributions, are consistent with those of non-BAL quasars. Moreover, our targets have X-ray spectral shapes that are, on average, consistent with weakened absorption with an effective power-law photon index of $Γ_{\rm eff}\,=\,1.69^{+0.25}_{-0.25}$. The newer $Gemini$ and ARC 3.5-m spectra reveal that the BAL troughs have remained absent since the BOSS observations where the BAL disappearance was discovered. The X-ray and optical/UV results in tandem are consistent with at least the X-ray absorbing material moving out of the line-of-sight, leaving an X-ray unabsorbed non-BAL quasar. The UV absorber might have become more highly ionized (in a shielding-gas scenario) or also moved out of the line-of-sight (in a wind-clumping scenario).

astro-ph.GA

Optical Stochastic Cooling Experiment At The Fermilab IOTA Ring

Beam cooling enables an increase of peak and average luminosities and significantly expands the discovery potential of colliders; therefore, it is an indispensable component of any modern design. Optical Stochastic Cooling (OSC) is a high-bandwidth, beam-cooling technique that will advance the present state-of-the-art, stochastic cooling rate by more than three orders of magnitude. It is an enabling technology for next-generation, discovery-science machines at the energy and intensity frontiers including hadron and electron-ion colliders. This paper presents the status of our experimental effort to demonstrate OSC at the Integrable Optics Test Accelerator (IOTA) ring, a testbed for advanced beam-physics concepts and technologies that is currently being commissioned at Fermilab. Our recent efforts are centered on the development of an integrated design that is prepared for final engineering and fabrication. The paper also presents a comparison of theoretical calculations and numerical simulations of the pickup-undulator radiation and its interaction with electrons in the kicker-undulator.

physics.acc-ph

Micro-Bunched Beam Production at FAST for Narrow Band THz Generation Using a Slit-Mask

We discuss simulations and experiments on creating micro-bunch beams for generating narrow band THz radiation at the Fermilab Accelerator Science and Technology (FAST) facility. The low-energy electron beamline at FAST consists of a photoinjector-based RF gun, two L-band superconducting accelerating cavities, a chicane, and a beam dump. The electron bunches are lengthened with cavity phases set off-crest for better longitudinal separation and then micro-bunched with a slit-mask installed in the chicane. We carried out the experiments with 30 MeV electron beams and detected signals of the micro-bunching using a skew quadrupole magnet in the chicane. In this paper, the details of micro-bunch beam production, the detection of micro-bunching and comparison with simulations are described.

physics.acc-ph

Submacropulse Electron-Beam Dynamics Correlated With Higher-Order Modes In Tesla-Type Superconducting RF Cavities

We report the direct observations of sub-macropulse beam centroid oscillations correlated with higher order modes (HOMs) which were generated by off-axis electron beam steering in TESLA-type superconducting RF cavities. The experiments were performed at the Fermilab Accelerator Science and Technology (FAST) facility using its unique configuration of a photocathode rf gun injecting beam into two separated 9-cell cavities in series with corrector magnets and beam position monitors (BPMs) located before, between, and after them. Oscillations of ~100 kHz in the vertical plane and ~380 kHz in the horizontal plane with up to 600-μm amplitudes were observed in a 3-MHz micropulse repetition rate beam with charges of 100, 300, 500, and 1000 pC/b. However, the effects were much reduced at 100 pC/b. The measurements were based on HOM detector circuitry targeting the first and second dipole passbands, rf BPM bunch-by-bunch array data, imaging cameras, and a framing camera. Calculations reproduced the oscillation frequencies of the phenomena in the vertical case. In principle, these fundamental results may be scaled to cryomodule configurations of major accelerator facilities.

physics.acc-ph

Diagnostics upgrades for investigations of HOM effects in Tesla-type SCRF cavities

We describe the upgrades to diagnostic capabilities on the Fermilab Accelerator Science and Technology (FAST) electron linear accelerator that will allow investigations of the effects of high-order modes (HOMs) in SCRF cavities on macropulse-average beam quality. We examine the dipole modes in the first pass-band generally observed in the 1.6-1.9 GHz regime for TESLA-type SCRF cavities due to uniform transverse beam offsets of the electron beam. Such cavities are the basis of the accelerators such as the European XFEL and the proposed MaRIE XFEL facility. Preliminary HOM detector data, prototype BPM test data, and first framing camera OTR data with ~20 micron spatial resolution at 250 pC per bunch will be presented.

physics.acc-ph

Initial observations of micropulse elongation of electron beams in a SCRF accelerator

Commissioning at the SCRF accelerator at the Fermilab Accelerator Science and Technology (FAST) Facility has included the implementation of a versatile bunch-length monitor located after the 4-dipole chicane bunch compressor for electron beam energies of 20-50 MeV and integrated charges in excess of 10 nC. The team has initially used a Hamamatsu C5680 synchroscan streak camera to assess the effects of space charge on the electron beam bunch lengths. An Al-coated Si screen was used to generate optical transition radiation (OTR) resulting from the beam's interaction with the screen. The chicane bypass beamline allowed the measurements of the bunch length without the compression stage at the downstream beamline location using OTR and the streak camera. We have observed electron beam bunch lengths from 5 to 16 ps (sigma) for micropulse charges of 60 pC to 800 pC, respectively. We also report a compressed sub-ps micropulse case.

physics.acc-ph

Initial Demonstration Of 9-MHz Framing Camera Rates On The FAST Drive Laser Pulse Trains

We report the configuration of a Hamamatsu C5680 streak camera as a framing camera to record transverse spatial information of green-component laser micropulses at 3- and 9-MHz rates for the first time. The latter is near the time scale of the ~7.5-MHz revolution frequency of the Integrable Optics Test Accelerator (IOTA) ring and its expected synchroton radiation source temporal structure. The 2-D images are recorded with a Gig-E readout CCD camera. We also report a first proof of principle with an OTR source using the linac streak camera in a semi-framing mode.

physics.acc-ph

Wave-Optics Modeling of the Optical-Transport Line for Passive Optical Stochastic Cooling

Optical stochastic cooling (OSC) is expected to enable fast cooling of dense particle beams. Transition from microwave to optical frequencies enables an achievement of stochastic cooling rates which are orders of magnitude higher than ones achievable with the classical microwave based stochastic cooling systems. A subsytem critical to the OSC scheme is the focusing optics used to image radiation from the upstream "pickup" undulator to the downstream "kicker" undulator. In this paper, we present simulation results using wave-optics calculation carried out with the {\sc Synchrotron Radiation Workshop} (SRW). Our simulations are performed in support to a proof-of-principle experiment planned at the Integrable Optics Test Accelerator (IOTA) at Fermilab. The calculations provide an estimate of the energy kick received by a 100-MeV electron as it propagates in the kicker undulator and interacts with the electromagnetic pulse it radiated at an earlier time while traveling through the pickup undulator.

physics.acc-ph

Analysis and Measurement of the Transfer Matrix of a 9-cell 1.3-GHz Superconducting Cavity

Superconducting linacs are capable of producing intense, stable, high-quality electron beams that have found widespread applications in science and industry. The 9-cell 1.3-GHz superconducting standing-wave accelerating RF cavity originally developed for $e^+/e^-$ linear-collider applications [B. Aunes, {\em et al.} Phys. Rev. ST Accel. Beams {\bf 3}, 092001 (2000)] has been broadly employed in various superconducting-linac designs. In this paper we discuss the transfer matrix of such a cavity and present its measurement performed at the Fermilab Accelerator Science and Technology (FAST) facility. The experimental results are found to be in agreement with analytical calculations and numerical simulations.

physics.acc-ph

Commissioning and First Results From Channeling Radiation At FAST

X-rays have widespread applications in science and industry, but developing a simple, compact, and high-quality X-ray source remains a challenge. Our collaboration has explored the possible use of channeling radiation driven by a 50 MeV low-emittance electron beam to produce narrowband hard X-rays with photon energy of 40 to 140 keV. Here we present the simulated X-ray spectra including the background bremsstrahlung contribution, and a description of the required optimization of the relevant electron-beam parameters necessary to maximize brilliance of the resulting X-ray beam. Results are presented from our test of this, carried out at the Fermilab Accelerator Science & Technology (FAST) facility's 50-MeV low-energy electron injector. As a result of the beam parameters, made possible by the photo-injector based SRF linac, the average brilliance at FAST was expected to be about one order of magnitude higher than that in previous experiments.

physics.acc-ph