arXiv subjects

J. S. Li

Publications and source records attributed to J. S. Li.

13 recordsLinked to original sources

arXiv2026

Kinetic temperature of massive star-forming molecular clumps measured with formaldehyde VI. The photodissociation region M17SW

The kinetic temperature structure of the photodissociation region M17SW was mapped using the IRAM 30 m telescope. This mapping employed the para-H2CO triplet (J(KaKc) = 303-202, 322-221, and 321-220) near 218 GHz on a scale of ~0.2 pc. The kinetic temperatures were derived by modeling the average H2CO line ratios (322-221/303-202 + 321-220/303-202) with the RADEX non-local thermodynamic equilibrium approach. These temperatures range from 28 to 181 K with an average of 54.2 +/- 0.3 K at a spatial density of 5.5x10^5 cm^-3. Comparing with the temperature measurements obtained from multiple transitions of NH3 (1,1)-(6,6) and the far infrared (FIR) dust continuum, the H2CO lines show temperatures similar to those measured by NH3 but slightly higher than values derived from FIR observations. The high kinetic temperatures observed from H2CO are associated with the ultracompact H II region UC1, dense clumps, as well as H2O and CH3OH masers, showing a similar distribution as NH3. This indicates that dense gas in the M17SW region is heated by star formation activity. The presence of a significant gas temperature gradient across the M17SW region, as measured by H2CO and NH3, provides direct evidence for gas heated predominantly by radiation emitted from the OB star cluster NGC 6618. On a smaller scale, the dense gas surrounding the dense clumps experiences significant heating from internal protostars and/or young stellar objects. Higher temperatures traced by H2CO are linked to turbulence on a scale of ~0.2 pc. The complex temperature structure of the M17SW region is revealed by H2CO and NH3, which may be attributed to both large-scale external radiative heating and small-scale internal radiative and turbulent heating.

astro-ph.GA↗

arXiv2026

Molecular Clouds at the Edge of the Galaxy II. Physical properties and scaling relations

The outer Galaxy presents an optimal setting for investigating molecular clouds and star formation in environments with low metallicity. A total of 72 Galactic edge clouds were surveyed using the CO\,(2--1) line with the IRAM\,30\,m telescope, leading to the identification of 112 CO clumps within molecular clouds with linear resolutions of 0.5--0.9\,pc. Parameters such as size, mass, surface density, and velocity dispersion of these CO clumps, derived from CO\,(2--1) observations, exhibit ranges of 0.6--3.4\,pc, 34--8250\,M$_\odot$, 12--1025\,M$_{\odot}$\,pc$^{-2}$, and 0.3--1.7\,km\,s$^{-1}$, respectively. Over the Galactocentric distance range of 14--23\,kpc, no systematic variations are found in these parameters. The velocity dispersion-size relationship of the Galactic edge clumps is modeled as $σ_{\rm v}$\,=\,0.69($\pm$0.03)$R_{\rm eff}^{0.36(\pm0.10)}$, indicating that turbulence is present within the Galactic edge clumps, akin to observations in the inner Galactic disk clouds. Furthermore, the luminous mass-size relation of the Galactic edge clumps is described by $M_{\rm lum}$\,=\,196($\pm$17)$R_{\rm eff}^{\,2.18\,(\pm0.26)}$, suggesting the average column density remains almost constant for clouds of different sizes. The virial parameters range from 0.6 to 15.3, with a median value of 2.8\,$\pm$\,0.6, suggesting that most clumps are gravitationally unbound. Furthermore, the virial parameters of our Galactic edge clumps show a decreasing trend with increasing Galactocentric distances, described by an exponential relation $α_{\rm vir}$\,=\,33.0($\pm$\,10.4)\,e$^{-R_{\rm g}/6.7(\pm0.9)}$, consistent with previous results.

astro-ph.GA↗

arXiv2025

Molecular Clouds at the Edge of the Galaxy I. Variation of CO J=2-1/1-0 Line Ratio

The Galactic edge at Galactocentric distances of 14\,--\,22\,kpc provides an ideal laboratory to study molecular clouds in an environment that is different from the solar neighborhood, due to its lower gas density, lower metallicity, and little or no perturbation from the spiral arms. Observations of CO\,($J$\,=\,2--1) spectral lines were carried out towards 72 molecular clouds located at the Galactic edge using the IRAM\,30\,m telescope. Combined with CO\,($J$\,=\,1--0) data from the MWISP project, we investigate the variations of $R_{21}$ across these Galactic edge clouds, with $R_{21}$ representing CO(2-1)/CO(1-0) integrated intensity ratios. These are found to range from 0.3 to 3.0 with a mean of 1.0\,$\pm$\,0.1 in the Galactic edge clouds. The proportions of very low ratio gas (VLRG; $R_{21}$\,<\,0.4), low ratio gas (LRG; 0.4\,$\le$\,$R_{21}$\,<\,0.7), high ratio gas (HRG; 0.7\,$\le$\,$R_{21}$\,<\,1.0), and very high ratio gas (VHRG; $R_{21}$\,$\ge$\,1.0) are 6.9\%, 29.2\%, 26.4\%, and 37.5\%, respectively, indicating a significant presence of high $R_{21}$ ratio molecular gas within these regions. In our Galaxy, the $R_{21}$ ratio exhibits a gradient of initial radial decline followed by a high dispersion with increasing Galacticentric distance and a prevalence for high ratio gas. There is no apparent systematic variation within the Galactocentric distance range of 14 to 22\,kpc. A substantial proportion of HRG and VHRG is found to be associated with compact clouds and regions displaying star-forming activity, suggesting that the high $R_{21}$ ratios may stem from dense gas concentrations and recent episodes of star formation.

astro-ph.GA↗

arXiv2024

Kinetic temperature of massive star-forming molecular clumps measured with formaldehyde V. The massive filament DR21

The kinetic temperature structure of the massive filament DR21 has been mapped using the IRAM 30 m telescope. This mapping employed the para-H$_2$CO triplet ($J_{\rm K_aK_c}$ = 3$_{03}$--2$_{02}$, 3$_{22}$--2$_{21}$, and 3$_{21}$--2$_{20}$) on a scale of $\sim$0.1 pc. By modeling the averaged line ratios of para-H$_{2}$CO with RADEX under non-LTE assumptions, the kinetic temperature of the dense gas was derived at a density of $n$(H$_{2}$) = 10$^{5}$ cm$^{-3}$. The para-H$_2$CO lines reveal significantly higher temperatures than NH$_3$ (1,1)/(2,2) and FIR wavelengths. The dense clumps appear to correlate with the notable kinetic temperature. Among the four dense cores (N44, N46, N48, and N54), temperature gradients are observed on a scale of $\sim$0.1-0.3 pc. This suggests that the warm dense gas is influenced by internal star formation activity. With the exception of N54, the temperature profiles of these cores were fitted with power-law indices ranging from $-$0.3 to $-$0.5. This indicates that the warm dense gas is heated by radiation emitted from internally embedded protostar(s) and/or clusters. While there is no direct evidence supporting the idea that the dense gas is heated by shocks resulting from a past explosive event in the DR21 region, our measurements toward the DR21W1 region provide compelling evidence that the dense gas is indeed heated by shocks originating from the western DR21 flow. Higher temperatures appear to be associated with turbulence. The physical parameters of the dense gas in the DR21 filament exhibit a remarkable similarity to the results obtained in OMC-1 and N113. This may imply that the physical mechanisms governing the dynamics and thermodynamics of dense gas traced by H$_{2}$CO in diverse star formation regions may be dominated by common underlying principles despite variations in specific environmental conditions. (abbreviated)

astro-ph.GA↗

arXiv2024

Magnetic structure and magnetoelectric coupling in antiferromagnet Co5(TeO3)4Cl2

The van der Waals (vdW) layered multiferroics, which host simultaneous ferroelectric and magnetic orders, have attracted attention not only for their potentials to be utilized in nanoelectric devices and spintronics, but also offer alternative opportunities for emergent physical phenomena. To date, the vdW layered multiferroic materials are still very rare. In this work, we have investigated the magnetic structure and magnetoelectric effects in Co5(TeO3)4Cl2, a promising new multiferroic compound with antiferromagnetic (AFM) Neel point TN = 18 K. The neutron powder diffraction reveals the non-coplanar AFM state with preferred Neel vector along the c-axis, while a spin re-orientation occurring between 8 K and 15 K is identified, which results from the distinct temperature dependence of the non-equivalent Co sites moment in Co5(TeO3)4Cl2. What is more, it is found that Co5(TeO3)4Cl2 is one of the best vdW multiferroics studied so far in terms of the multiferroic performance. The measured linear ME coefficient exhibits the emergent oscillation dependence of the angle between magnetic field and electric field, and the maximal value is as big as 45 ps/m. It is suggested that Co5(TeO3)4Cl2 is an appreciated platform for exploring the emergent multiferroicity in vdW layered compounds.

cond-mat.mtrl-sci↗

arXiv2023

The Lobster Eye Imager for Astronomy Onboard the SATech-01 Satellite

The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (FoV) of 346 square degrees (18.6 degrees * 18.6 degrees) of the X-ray imager is realized. An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons, and four large-format complementary metal-oxide semiconductor (CMOS) sensors, each of 6 cm * 6 cm, are used as the focal plane detectors. The instrument has an angular resolution of 4 - 8 arcmin (in FWHM) for the central focal spot of the point spread function, and an effective area of 2 - 3 cm2 at 1 keV in essentially all the directions within the field of view. The detection passband is 0.5 - 4 keV in the soft X-rays and the sensitivity is 2 - 3 * 10-11 erg s-1 cm-2 (about 1 mini-Crab) at 1,000 second observation. The total weight of LEIA is 56 kg and the power is 85 W. The satellite, with a design lifetime of 2 years, operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes. LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation, and by optimizing the working setups of the instrumental parameters. In addition, LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band, albeit limited useful observing time available.

astro-ph.IM↗

arXiv2021

Kinetic temperature of massive star-forming molecular clumps measured with formaldehyde IV. The ALMA view of N113 and N159W in the LMC

We mapped the kinetic temperature structure of two massive star-forming regions, N113 and N159W, in the Large Magellanic Cloud (LMC). We have used $\sim$1\hbox{$\,.\!\!^{\prime\prime}$}6\,($\sim$0.4\,pc) resolution measurements of the para-H$_2$CO\,$J_{\rm K_ aK_c}$\,=\,3$_{03}$--2$_{02}$, 3$_{22}$--2$_{21}$, and 3$_{21}$--2$_{20}$ transitions near 218.5\,GHz to constrain RADEX non-LTE models of the physical conditions. The gas kinetic temperatures derived from the para-H$_2$CO line ratios 3$_{22}$--2$_{21}$/3$_{03}$--2$_{02}$ and 3$_{21}$--2$_{20}$/3$_{03}$--2$_{02}$ range from 28 to 105\,K in N113 and 29 to 68\,K in N159W. Distributions of the dense gas traced by para-H$_2$CO agree with those of the 1.3\,mm dust and \emph{Spitzer}\,8.0\,$μ$m emission, but do not significantly correlate with the H$α$ emission. The high kinetic temperatures ($T_{\rm kin}$\,$\gtrsim$\,50\,K) of the dense gas traced by para-H$_2$CO appear to be correlated with the embedded infrared sources inside the clouds and/or YSOs in the N113 and N159W regions. The lower temperatures ($T_{\rm kin}$\,$<$\,50\,K) are measured at the outskirts of the H$_2$CO-bearing distributions of both N113 and N159W. It seems that the kinetic temperatures of the dense gas traced by para-H$_2$CO are weakly affected by the external sources of the H$α$ emission. The non-thermal velocity dispersions of para-H$_2$CO are well correlated with the gas kinetic temperatures in the N113 region, implying that the higher kinetic temperature traced by para-H$_2$CO is related to turbulence on a $\sim$0.4\,pc scale. The dense gas heating appears to be dominated by internal star formation activity, radiation, and/or turbulence. It seems that the mechanism heating the dense gas of the star-forming regions in the LMC is consistent with that in Galactic massive star-forming regions located in the Galactic plane.

astro-ph.GA↗

arXiv2021

On the complete interface development of Al/Cu magnetic pulse welding via experimental characterizations and multiphysics numerical simulations

A complex Al/Cu magnetic pulse welding interface is systematically investigated using experimental characterizations and numerical simulations. A Coupled electromagnetic-mechanical simulation is proposed to compute the impact velocity and impact angle along the entire interface. This model allows to further understand the formation mechanism of various interface characteristics during MPW. The results revealed that the impact velocity gradually decreases in conjunction with the gradual increase of the impact angle. These simulations elucidate the experimentally observed successive interface morphologies, i.e., the unwelded zone, vortex zone, intermediate (IM) layers and wavy interface. Microstructural characterizations show that the IM layers are formed by mechanical mixing combined with melting and are characterized by highly heterogeneous porous zone with random sizes and distributions of void. Subsequently, an Eulerian simulation is proposed to investigate the thermomechanical effects during the wave formation which vastly influence the joint quality. The predicted wavy morphologies, temperature distribution and average equivalent plastic strain along the interface provided a better understanding on the formation steps of the experimentally observed wave morphologies. The actual kinematics during wave generation revealed that the wave was formed with repeated deformation of the interface material. The wave amplitude increases with increasing jetting angle; while the wavelength increases with increasing collision point velocity.

physics.app-ph↗

arXiv2013

Projectile fragment emission in fragmentation of $^{56}$Fe on C, Al,and CH$_{2}$ targets at 471 A MeV

The emission angle and the transverse momentum distributions of projectile fragments produced in fragmentation of $^{56}$Fe on CH$_{2}$, C, and Al targets at 471 A MeV are measured. It is found that for the same target the average value and width of angular distribution decrease with increase of the projectile fragment charge, and for the same projectile fragment the average value of the distribution increases and the width of the distribution decreases with increasing the target charge number. The transverse momentum distribution of projectile fragment can be explained by a single Gaussian distribution and the averaged transverse momentum per nucleon decreases with the increase of the charge of projectile fragment. The cumulated squared transverse momentum distribution of projectile fragment can be well explained by a single Rayleigh distribution. The temperature parameter of emission source of projectile fragment, calculated from the cumulated squared transverse momentum distribution, decreases with the increase of the size of projectile fragment.

nucl-ex↗

arXiv2006

Improved Superconducting Properties in Bulk MgB2 Prepared by High Energy Milling of Mg and B Powder

The MgB2 bulks were prepared by high energy milling of Mg and B powder. The correlations among milling times, microstructure and superconducting properties were investigated in MgB2 bulks. Samples were characterized by x-ray diffraction (XRD), energy dispersive spectrometry (EDX) and scanning electron microscope (SEM), and the magnetization properties were examined by a Superconducting quantum interfere device (SQUID) magnetometer. It showed that the high energy milling is an effective approach to get fine crystalline (40-100nm) bulk MgB2 with good grain connectivity and high Jc performance. The critical current density reaches to 2.0X10E6A/cm2 at 15K and 0.59T, 5.7X10E5A/cm2 at 2T and 3.0X10E4A/cm2 at 5T.

cond-mat.supr-con↗

arXiv2006

Influence of Preparation Process on Microstructure, Critical Current Density and Tc of MgB2/Fe/Cu Wires

The powder-in-tube MgB2 wires were prepared by high energy milling of Mg and B powder. The powder was not mechanically alloyed for 2h short milling time. However, the MgB2 grains in wires are very small (20 100nm) and resembled to the dimple after post-heat treatment. The clear evidence for transcrystlline fracture is observed. It indicated that the grain connection was greatly improved and the fluxing pinning was significantly enhanced. Another point to view is no intermediate annealing was adopted during the whole rolling process. The influence of the post-heat treatment on the transport current density was studied. Despite the lower Tc of about 35K, the transport current density reaches to 3X10E4A/cm2 at 15K and 3.5T for 700 sintered wires.

cond-mat.supr-con↗

arXiv2006

The Influence of Synthesis Parameters on Microstructures and Superconducting Properties of MgB2 Bulks

We succeeded in the synthesis of high-Jc MgB2 bulks via high energy ball-milling of elemental Mg and B powder at ambient temperatures. Alternatively to longtime mechanical alloying technique, the mixed powder was ball-milled for only 1h and the completed reaction is achieved by subsequent annealing. The correlations among synthesis parameters, microstructures and superconducting properties in MgB2 bulks were investigated. Samples were characterized by XRD and SEM, and the magnetization properties were examined in a SQUID magnetometer. The high- Jc, approximately 1.7*106A/cm2(15K, 0.59T), and improved flux pinning were attribute to a large number of grain boundaries provided by small grain size.

cond-mat.supr-con↗

arXiv2004

Broadband Relaxation-Optimized Polarization Transfer in Magnetic Resonance

Many applications of magnetic resonance are limited by rapid loss of spin coherence caused by large transverse relaxation rates. In nuclear magnetic resonance (NMR) of large proteins, increased relaxation losses lead to poor sensitivity of experiments and increased measurement time. In this paper we develop broadband relaxation optimized pulse sequences (BB-CROP) which approach fundamental limits of coherence transfer efficiency in the presence of very general relaxation mechanisms that include cross-correlated relaxation. These broadband transfer schemes use new techniques of chemical shift refocusing (STAR echoes) that are tailored to specific trajectories of coupled spin evolution. We present simulations and experimental data indicating significant enhancement in the sensitivity of multi-dimensional NMR experiments of large molecules by use of these methods.

quant-ph↗