arXiv subjects

J. Schmoll

Publications and source records attributed to J. Schmoll.

15 recordsLinked to original sources

arXiv2020

Download by Parachute: Retrieval of Assets from High Altitude Balloons

We present a publicly-available toolkit of flight-proven hardware and software to retrieve 5 TB of data or small physical samples from a stratospheric balloon platform. Before launch, a capsule is attached to the balloon, and rises with it. Upon remote command, the capsule is released and descends via parachute, continuously transmitting its location. Software to predict the trajectory can be used to select a safe but accessible landing site. We dropped two such capsules from the SuperBIT telescope, in September 2019. The capsules took ~37 minutes to descend from ~30 km altitude. They drifted 32 km and 19 km horizontally, but landed within 300 m and 600 m of their predicted landing sites. We found them easily, and successfully recovered the data. We welcome interest from other balloon teams for whom the technology would be useful.

astro-ph.IM↗

arXiv2016

The Gamma-ray Cherenkov Telescope for the Cherenkov Telescope Array

The Cherenkov Telescope Array (CTA) is a forthcoming ground-based observatory for very-high-energy gamma rays. CTA will consist of two arrays of imaging atmospheric Cherenkov telescopes in the Northern and Southern hemispheres, and will combine telescopes of different types to achieve unprecedented performance and energy coverage. The Gamma-ray Cherenkov Telescope (GCT) is one of the small-sized telescopes proposed for CTA to explore the energy range from a few TeV to hundreds of TeV with a field of view $\gtrsim 8^\circ$ and angular resolution of a few arcminutes. The GCT design features dual-mirror Schwarzschild-Couder optics and a compact camera based on densely-pixelated photodetectors as well as custom electronics. In this contribution we provide an overview of the GCT project with focus on prototype development and testing that is currently ongoing. We present results obtained during the first on-telescope campaign in late 2015 at the Observatoire de Paris-Meudon, during which we recorded the first Cherenkov images from atmospheric showers with the GCT multi-anode photomultiplier camera prototype. We also discuss the development of a second GCT camera prototype with silicon photomultipliers as photosensors, and plans toward a contribution to the realisation of CTA.

astro-ph.IM↗

arXiv2016

Inauguration and First Light of the GCT-M Prototype for the Cherenkov Telescope Array

The Gamma-ray Cherenkov Telescope (GCT) is a candidate for the Small Size Telescopes (SSTs) of the Cherenkov Telescope Array (CTA). Its purpose is to extend the sensitivity of CTA to gamma-ray energies reaching 300 TeV. Its dual-mirror optical design and curved focal plane enables the use of a compact camera of 0.4 m diameter, while achieving a field of view of above 8 degrees. Through the use of the digitising TARGET ASICs, the Cherenkov flash is sampled once per nanosecond continuously and then digitised when triggering conditions are met within the analogue outputs of the photosensors. Entire waveforms (typically covering 96 ns) for all 2048 pixels are then stored for analysis, allowing for a broad spectrum of investigations to be performed on the data. Two prototypes of the GCT camera are under development, with differing photosensors: Multi-Anode Photomultipliers (MAPMs) and Silicon Photomultipliers (SiPMs). During November 2015, the GCT MAPM (GCT-M) prototype camera was integrated onto the GCT structure at the Observatoire de Paris-Meudon, where it observed the first Cherenkov light detected by a prototype instrument for CTA.

astro-ph.IM↗

arXiv2016

The GCT camera for the Cherenkov Telescope Array

The Gamma-ray Cherenkov Telescope (GCT) is proposed for the Small-Sized Telescope component of the Cherenkov Telescope Array (CTA). GCT's dual-mirror Schwarzschild-Couder (SC) optical system allows the use of a compact camera with small form-factor photosensors. The GCT camera is ~0.4 m in diameter and has 2048 pixels; each pixel has a ~0.2 degree angular size, resulting in a wide field-of-view. The design of the GCT camera is high performance at low cost, with the camera housing 32 front-end electronics modules providing full waveform information for all of the camera's 2048 pixels. The first GCT camera prototype, CHEC-M, was commissioned during 2015, culminating in the first Cherenkov images recorded by a SC telescope and the first light of a CTA prototype. In this contribution we give a detailed description of the GCT camera and present preliminary results from CHEC-M's commissioning.

astro-ph.IM↗

arXiv2015

The first GCT camera for the Cherenkov Telescope Array

The Gamma Cherenkov Telescope (GCT) is proposed to be part of the Small Size Telescope (SST) array of the Cherenkov Telescope Array (CTA). The GCT dual-mirror optical design allows the use of a compact camera of diameter roughly 0.4 m. The curved focal plane is equipped with 2048 pixels of ~0.2° angular size, resulting in a field of view of ~9°. The GCT camera is designed to record the flashes of Cherenkov light from electromagnetic cascades, which last only a few tens of nanoseconds. Modules based on custom ASICs provide the required fast electronics, facilitating sampling and digitisation as well as first level of triggering. The first GCT camera prototype is currently being commissioned in the UK. On-telescope tests are planned later this year. Here we give a detailed description of the camera prototype and present recent progress with testing and commissioning.

astro-ph.IM↗

arXiv2013

The dual-mirror Small Size Telescope for the Cherenkov Telescope Array

In this paper, the development of the dual mirror Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA) is reviewed. Up to 70 SST, with a primary mirror diameter of 4 m, will be produced and installed at the CTA southern site. These will allow investigation of the gamma-ray sky at the highest energies accessible to CTA, in the range from about 1 TeV to 300 TeV. The telescope presented in this contribution is characterized by two major innovations: the use of a dual mirror Schwarzschild-Couder configuration and of an innovative camera using as sensors either multi-anode photomultipliers (MAPM) or silicon photomultipliers (SiPM). The reduced plate-scale of the telescope, achieved with the dual-mirror optics, allows the camera to be compact (40 cm in diameter), and low-cost. The camera, which has about 2000 pixels of size 6x6 mm^2, covers a field of view of 10°. The dual mirror telescopes and their cameras are being developed by three consortia, ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana, Italy/INAF), GATE (Gamma-ray Telescope Elements, France/Paris Observ.) and CHEC (Compact High Energy Camera, universities in UK, US and Japan) which are merging their efforts in order to finalize an end-to-end design that will be constructed for CTA. A number of prototype structures and cameras are being developed in order to investigate various alternative designs. In this contribution, these designs are presented, along with the technological solutions under study.

astro-ph.IM↗

arXiv2013

SST-GATE: A dual mirror telescope for the Cherenkov Telescope Array

The Cherenkov Telescope Array (CTA) will be the world's first open observatory for very high energy gamma-rays. Around a hundred telescopes of different sizes will be used to detect the Cherenkov light that results from gamma-ray induced air showers in the atmosphere. Amongst them, a large number of Small Size Telescopes (SST), with a diameter of about 4 m, will assure an unprecedented coverage of the high energy end of the electromagnetic spectrum (above ~1TeV to beyond 100 TeV) and will open up a new window on the non-thermal sky. Several concepts for the SST design are currently being investigated with the aim of combining a large field of view (~9 degrees) with a good resolution of the shower images, as well as minimizing costs. These include a Davies-Cotton configuration with a Geiger-mode avalanche photodiode (GAPD) based camera, as pioneered by FACT, and a novel and as yet untested design based on the Schwarzschild-Couder configuration, which uses a secondary mirror to reduce the plate-scale and to allow for a wide field of view with a light-weight camera, e.g. using GAPDs or multi-anode photomultipliers. One objective of the GATE (Gamma-ray Telescope Elements) programme is to build one of the first Schwarzschild-Couder prototypes and to evaluate its performance. The construction of the SST-GATE prototype on the campus of the Paris Observatory in Meudon is under way. We report on the current status of the project and provide details of the opto-mechanical design of the prototype, the development of its control software, and simulations of its expected performance.

astro-ph.IM↗

arXiv2013

A Compact High Energy Camera for the Cherenkov Telescope Array

The Compact High Energy Camera (CHEC) is a camera-development project involving UK, US, Japanese and Dutch institutes for the dual-mirror Small-Sized Telescopes (SST-2M) of the Cherenkov Telescope Array (CTA). Two CHEC prototypes, based on different photosensors are funded and will be assembled and tested in the UK over the next ~18 months. CHEC is designed to record flashes of Cherenkov light lasting from a few to a hundred nanoseconds, with typical RMS image width and length of ~0.2 x 1.0 degrees, and has a 9 degree field of view. The physical camera geometry is dictated by the telescope optics: a curved focal surface with radius of curvature 1m and diameter ~35cm is required. CHEC is designed to work with both the ASTRI and GATE SST-2M telescope structures and will include an internal LED flasher system for calibration. The first CHEC prototype will be based on multi-anode photomultipliers (MAPMs) and the second on silicon photomultipliers (SiPMs or MPPCs). The first prototype will soon be installed on the ASTRI SST-2M prototype structure on Mt. Etna.

astro-ph.IM↗

arXiv2005

Optical replication techniques for image slicers

The Smart Focal Planes (SmartFP) activity is a European Joint Research Activity funded to develop novel optical technologies for future large telescope instrumentation. In this paper, we will discuss the image slicer developments being carried out as part of this initiative. Image slicing technique s have many applications in the plans for instrumentation on Extremely Large Telescopes and will be central to the delivery of the science case. A study of a virtual "multi-object multi-ifu spectrograph and imager" (MOMSI) for a hypothetical OWL-class telescope reveals the need for focal plane splitting, deployable imagers and very small beam steering elements like deployable IFUs. The image slicer workpackage, lead from Durham University in collaboration with LFM Bremen, TNO Delft, UKATC Edinburgh, CRAL Lyon, LAM Marseille, Padua University and REFLEX Prague, is evaluating technologies for manufacturing micro optics in large numbers to enable multi-object integral field spectroscopy.

astro-ph↗

arXiv2005

The Durham Micro-Optics Programme

The Durham Microoptics Programme was established to develop key components to be used for integral field spectrographs for upcoming instrumentation projects, focussing on currently existing telescopes as well as on the next generation of ELTs. These activities include monolithic multi-optics machining and grinding, optical surface improvement using various post polishing techniques and replication of micro-optical components. While these developments have mostly slicer-type IFUs in mind, also new types of microlens arrays are in development for fiber based high contrast IFU systems.

astro-ph↗

arXiv2005

PMAS, the Potsdam Multi-Aperture Spectrophotometer. I. Design, Manufacture, and Performance

We describe the design, manufacture, commissioning, and performance of PMAS, the Potsdam Multi-Aperture Spectrophotometer. PMAS is a dedicated integral field spectrophotometer, optimized to cover the optical wavelength regime of 0.35--1um. It is based on the lens array -- fiber bundle principle of operation. The instrument employs an all-refractive fiber spectrograph, built with CaF2 optics, to provide good transmission and high image quality over the entire nominal wavelength range. A set of user-selectable reflective gratings provides low to medium spectral resolution in first order of approx. 1.5, 3.2, and 7 A, depending on the groove density (1200, 600, 300 gr/mm). While the standard integral field unit (IFU) uses a 16x16 element lens array, which provides seeing-limited sampling in a relatively small field-of-view (FOV) in one of three magnifications (8x8, 12x12, or 16x16 arcsec^2, respectively), a recently retrofitted bare fiber bundle IFU (PPak) expands the FOV to a hexagonal area with a footprint of 65x74 arcsec^2. Other special features include a cryogenic CCD camera for field acquisition and guiding, a nod-shuffle mode for beam switching and improved sky background subtraction, and a scanning Fabry-Perot etalon in combination with the standard IFU (PYTHEAS mode). PMAS was initially designed and built as an experimental traveling instrument with optical interfaces to various telescopes (Calar Alto 3.5m, ESO-VLT, LBT). It is offered as a common user instrument at Calar Alto under contract with MPIA Heidelberg since 2002.

astro-ph↗

arXiv2004

Design and construction of the IMACS-IFU, a 2000-element integral field unit

The IMACS-IFU is an Integral Field Unit built for the IMACS spectrograph at the Magellan-I-Telescope at Las Campanas Observatory. It consists of two rectangular fields of 5 by 7 arcseconds, separated by roughly one arcminute. With a total number of 2000 spatial elements it is the second largest fiber-lenslet based IFU worldwide, working in a wavelength range between 400 and 900 nm. Due to the equally sized fields classical background subtraction, beam switching and shuffling are possible observation techniques. One particular design challenge was the single, half a metre long curved slit in combination with a non telecentric output. Besides the construction some preliminary results are described.

astro-ph↗

arXiv2003

3D Spectrophotometry of Planetary Nebulae in the Bulge of M31

We introduce crowded field integral field (3D) spectrophotometry as a useful technique for the study of resolved stellar populations in nearby galaxies. As a methodological test, we present a pilot study with selected extragalactic planetary nebulae (XPN) in the bulge of M31, demonstrating how 3D spectroscopy is able to improve the limited accuracy of background subtraction which one would normally obtain with classical slit spectroscopy. It is shown that due to the absence of slit effects, 3D is a most suitable technique for spectrophometry. We present spectra and line intensities for 5 XPN in M31, obtained with the MPFS instrument at the Russian 6m BTA, INTEGRAL at the WHT, and with PMAS at the Calar Alto 3.5m Telescope. Using 3D spectra of bright standard stars, we demonstrate that the PSF is sampled with high accuracy, providing a centroiding precision at the milli-arcsec level. Crowded field 3D spectrophotometry and the use of PSF fitting techniques is suggested as the method of choice for a number of similar observational problems, including luminous stars in nearby galaxies, supernovae, QSO host galaxies, gravitationally lensed QSOs, and others.

astro-ph↗

arXiv2003

Statistical Test of Optical Fibers for use in PMAS, the Potsdam Multi-Aperture Spectrophotometer

Focal ratio degradation measurements of optical fibers for the PMAS integral field instrument have been performed using the Photometric Testbench of the Potsdam Astrophysical Institute (AIP). An effort has been made to obtain sufficiently large statistical samples of individual fiber measurements. The optimization of the measurement process has made it possible to study quantitatively the effects of different coupling methods (air--glass vs.\ immersion) and of imperfections like defocus, lateral displacement, and angular misalignment. Furthermore, the effects of mechanical stress on focal ratio degradation have been investigated, confirming the presumed cause of modal noise which is known to limit the maximum signal-to-noise one can achieve with fiber-coupled echelle spectrographs.

astro-ph↗

arXiv1999

BUSCA: A Telescope Instrumentation for Simultaneous Imaging in 4 Optical Bands

The "Bonn University Simultaneous CAmera" (BUSCA) is a CCD camera system which allows simultaneous direct imaging of the same sky area in four colors. The optics are designed for an f/8 beam and four 4Kx4K CCDs with 15m pixels covering a field of view of 12 arcmin x 12 arcmin at a 2m class telescope. In September 1998 BUSCA has seen "First Light". The instrument is based on three dichroic beam splitters which separate optical wavelength bands such (at 430nm, 540nm, 730nm) that standard astronomical intermediate-band filter systems can be used. The dichroics are made of plane-parallel glass plates mounted at an angle of 45 degrees. Astigmatism in the transmitted beams (f/8) is completely cancelled by identical plane-parallel glass plates of suitable orientation. BUSCA offers new perspectives in astronomical multicolor photometry: i) The broadband spectral properties (e.g. color indices) of astronomical objects in the optical can be determined with high reliability even in non-photometric atmospheric conditions. ii) Precious observing time is used very efficiently. iii) With the large field of view, extended objects like globular and open star clusters or galaxies are covered in a single exposure. iv) Each exposure results in a complete data set.

astro-ph↗