SearcharxivSearch

arXiv subjects

J. Smith

Publications and source records attributed to J. Smith.

At least 19 recordsLinked to original sources

Reliable and High Performance IGZO and In2O3 Transistors via Channel Capping

A device and process strategy for achieving reliable indium gallium zinc oxide and indium oxide transistors compatible with a 400oC BEOL thermal budget and without performance degradation is demonstrated by fully exploiting intrinsic oxide material properties. An indium oxide transistor with a novel amorphous In2O3 mixed with SiO2 capping layer exhibits a positive threshold voltage, high extrinsic saturation mobility 33.1 cm2/V.s ,and only a 5mV Vt shift after positive-bias stress at 3 MV/cm for 1000s at room temperature, superior to conventional SiO2 encapsulation.

cond-mat.mtrl-sci

Innovative Oxide Transistor Satisfying Performance and Reliability Simultaneously by Understanding of Physics and Materials Properties

Guided by a comprehensive analysis of accumulation mode transistor physics and oxide semiconductor materials properties, we demonstrate an innovative oxide semiconductor transistor structure and process flow that break the constraint between performance and reliability observed in conventional InGaZnO4 (IGZO) transistors. The newly proposed 10 nm innovative IGZO transistor features high on-current, high extrinsic mobility (20 cm2V-1s-1), near-zero hysteresis, and only 15 mV Vt shift after positive-bias-stress (PBS) of 3 MV/cm stress for 1000s at room temperature.

cond-mat.mtrl-sci

X-ray thermal diffuse scattering as a texture-robust temperature diagnostic for dynamically compressed solids

We present a model of x-ray thermal diffuse scattering (TDS) from a cubic polycrystal with an arbitrary crystallographic texture, based on the classic approach of Warren. We compare the predictions of our model with femtosecond x-ray diffraction patterns obtained from ambient and dynamically compressed rolled copper foils obtained at the High Energy Density (HED) instrument of the European X-Ray Free-Electron Laser (EuXFEL), and find that the texture-aware TDS model yields more accurate results than does the conventional powder model owed to Warren. Nevertheless, we further show that: with sufficient angular detector coverage, the TDS signal is largely unchanged by sample orientation and in all cases strongly resembles the signal from a perfectly random powder; shot-to-shot fluctuations in the TDS signal resulting from grain-sampling statistics are at the percent level, in stark contrast to the fluctuations in the Bragg-peak intensities (which are over an order of magnitude greater); and TDS is largely unchanged even following texture evolution caused by compression-induced plastic deformation. We conclude that TDS is robust against texture variation, making it a flexible temperature diagnostic applicable just as well to off-the-shelf commercial foils as to ideal powders.

physics.app-ph

Proton Transparency and Neutrino Physics: New Methods and Modeling

Extracting accurate results from neutrino oscillation and cross section experiments requires accurate simulation of the neutrino-nucleus interaction. The rescattering of outgoing hadrons (final state interactions) by the rest of the nucleus is an important component of these interactions. We present a new measurement of proton transparency (defined as the fraction of outgoing protons that emerge without significant rescattering) using electron-nucleus scattering data recorded by the CLAS detector at Jefferson Laboratory on helium, carbon, and iron targets. This analysis by the Electrons for Neutrinos ($e4\nu$) collaboration uses a new data-driven method to extract the transparency. It defines transparency as the ratio of electron-scattering events with a detected proton to quasi-elastic electron-scattering events where a proton should have been knocked out. Our results are consistent with previous measurements that determined the transparency from the ratio of measured events to theoretically predicted events. We find that the GENIE event generator, which is widely used by oscillation experiments to simulate neutrino-nucleus interactions, needs to better describe both the nuclear ground state and proton rescattering in order to reproduce our measured transparency ratios, especially at lower proton momenta.

hep-ex

Neutron-induced reaction cross section measurements on carbon at neutron energies up to 55 MeV at LANSCE

Background: Single-crystal chemical vapor deposited (sCVD) diamond detectors offer a unique method to study cross sections of reactions on carbon since they can be used as active targets. Previous studies analyzing neutrons on carbon using these detectors were primarily focused on lower energy neutrons and reactions, and some of these did not have sufficient energy resolution to isolate the contributions of reaction channels with similar Q values. Purpose: This work extends neutron-induced reaction cross section measurements to higher energies, relevant to rare isotope facilities. These measurements can be used to inform and benchmark simulation of experiments that require neutron detection, particularly those utilizing organic scintillators. For some experiments, simulations are used to extract physics information from experimental data, reinforcing the need for accurate simulations. Methods: Two sCVD diamond detectors were used as active targets at LANSCE, where neutrons up to 800 MeV are produced via spallation. Results: Relative cross sections are reported from incident neutron (kinetic) energies E$_n$ = 12 MeV up to 55 MeV for $^{12}$C(n,$\alpha_0$), up to 46 MeV for $^{12}$C(n,d$_0$), and up to 27 MeV for $^{12}$C(n,p$_0$) and $^{12}$C(n,p$_1$). These measurements extend these cross sections to higher energies than those of previous studies. Conclusions: Good agreement is found between this work and recent experimental data from the EXFOR database in the neutron energies where the studies overlap. This work supports the need to update the ENDF evaluation for the (n,$\alpha_0$) channel with more recent data, and provides data that could allow for an evaluation of the (n,p$_0$), (n,p$_1$), and (n,d$_0$) channels. These cross sections will increase the accuracy of simulations by extending the energy range for which empirical cross sections are available.

nucl-ex

Low thermal noise mirror coatings utilising titanium dioxide and germanium dioxide mixtures

Upgrades to ground-based gravitational-wave observatories will require mirror coatings with reduced thermal noise, enabling improved detector sensitivity and extended astrophysical reach. Recent studies have shown that optical coatings utilising amorphous materials that exhibit a larger fraction of corner-sharing between adjacent structural units of metal-centered polyhedra are a promising route for reducing mechanical dissipation and thus thermal noise at room temperature. We report on multilayer optical coatings that are fabricated using germanium dioxide mixed with titanium dioxide (TiO$_2$:GeO$_2$) for the high index layers, and silicon dioxide (SiO$_2$) for the low index material. Single layers of TiO$_2$:GeO$_2$ are characterised to optimise the mixture proportion and based on that highly reflective multilayer stacks were deposited. Exceptional optical absorption at 1064 nm below 1 part-per-million (ppm) is observed in the multilayer stacks after heat treatment. The annealing process also induces the formation of blisters which leads to increased optical scattering. However, there is indication that blisters can be suppressed by decreasing the water partial pressure in the deposition chamber. Direct thermal noise measurements provide experimental verification of a significant 25\% reduction of thermal noise over the mirrors currently employed, which combined with sub-ppm levels of optical absorption show the potential of TiO$_2$:GeO$_2$ to improve the sensitivity of gravitational-wave observatories.

physics.ins-det

Femtosecond temperature measurements of laser-shocked copper deduced from the intensity of the x-ray thermal diffuse scattering

We present 50-fs, single-shot measurements of the x-ray thermal diffuse scattering (TDS) from copper foils that have been shocked via nanosecond laser-ablation up to pressures above 135~GPa. We hence deduce the x-ray Debye-Waller (DW) factor, providing a temperature measurement. The targets were laser-shocked with the DiPOLE 100-X laser at the High Energy Density (HED) endstation of the European X-ray Free-Electron Laser (EuXFEL). Single x-ray pulses, with a photon energy of 18 keV, were scattered from the samples and recorded on Varex detectors. Despite the targets being highly textured (as evinced by large variations in the elastic scattering), and with such texture changing upon compression, the absolute intensity of the azimuthally averaged inelastic TDS between the Bragg peaks is largely insensitive to these changes, and, allowing for both Compton scattering and the low-level scattering from a sacrificial ablator layer, provides a reliable measurement of $T/\Theta_D^2$, where $\Theta_D$ is the Debye temperature. We compare our results with the predictions of the SESAME 3336 and LEOS 290 equations of state for copper, and find good agreement within experimental errors. We thus demonstrate that single-shot temperature measurements of dynamically compressed materials can be made via thermal diffuse scattering of XFEL radation.

cond-mat.mtrl-sci

Finding passive, reciprocal metasurfaces for arbitrary wave transformations

We give a general design method for finding the passive, reciprocal surface impedance tensor required to enact any wave transformation. We do this through characterising the surface in terms of a tensorial surface impedance, showing that a large family of impedance distributions can be found that perform an identical wave transformation. Even when the conditions of reciprocity and passivity are imposed, there still remain many solutions to the design problem.} We exploit this as a design method for metasurfaces, giving two examples where the metasurface rotates the input polarization and reshapes the output field, showing we can parameterize the set of equivalent reciprocal metasurfaces in terms of a single complex parameter. \hl{In addition, through allowing dissipation and gain within the response, the surface can have many different functionalities in the orthogonal polarization, opening up a new route for the design of multiplexed metasurfaces.

physics.app-ph

Materials for Quantum Technologies: a Roadmap for Spin and Topology

In this Perspective article, we explore some of the promising spin and topology material platforms (e.g. spins in semi- and superconductors, skyrmionic, topological and 2D materials) being developed for such quantum components as qubits, superconducting memories, sensing, and metrological standards and discuss their figures of merit. Spin- and topology-related quantum phenomena have several advantages, including high coherence time, topological protection and stability, low error rate, relative ease of engineering and control, simple initiation and read-out. However, the relevant technologies are at different stages of research and development, and here we discuss their state-of-the-art, potential applications, challenges and solutions.

cond-mat.mes-hall

Evolution of the nuclear spin-orbit splitting explored via the $^{32}$Si($d$,$p$)$^{33}$Si reaction using SOLARIS

The spin-orbit splitting between neutron 1$p$ orbitals at $^{33}$Si has been deduced using the single-neutron-adding ($d$,$p$) reaction in inverse kinematics with a beam of $^{32}$Si, a long-lived radioisotope. Reaction products were analyzed by the newly implemented SOLARIS spectrometer at the reaccelerated-beam facility at the National Superconducting Cyclotron Laboratory. The measurements show reasonable agreement with shell-model calculations that incorporate modern cross-shell interactions, but they contradict the prediction of proton density depletion based on relativistic mean-field theory. The evolution of the neutron 1$p$-shell orbitals is systematically studied using the present and existing data in the isotonic chains of $N=17$, 19, and 21. In each case, a smooth decrease in the separation of the $1p_{3/2}$-$1p_{1/2}$ orbitals is seen as the respective $p$-orbitals approach zero binding, suggesting that the finite nuclear potential strongly influences the evolution of nuclear structure in this region.

nucl-ex

Strong evidence for 9N and the limits of existence of atomic nuclei

The boundaries of the Chart of Nuclides contain exotic isotopes that possess extreme proton-toneutron asymmetries. Here we report on strong evidence of 9N, one of the most exotic proton-rich isotopes where more than one half of its constitute nucleons are unbound. With seven protons and two neutrons, this extremely proton-rich system would represent the first-known example of a ground-state five-proton emitter. The invariant-mass spectrum of its decay products can be fit with two peaks whose energies are consistent with the theoretical predictions of an open-quantum-system approach, however we cannot rule out the possibility that only a single resonance-like peak is present in the spectrum.

nucl-ex

Event-by-Event Direction Reconstruction of Solar Neutrinos in a High Light-Yield Liquid Scintillator

The direction of individual $^8$B solar neutrinos has been reconstructed using the SNO+ liquid scintillator detector. Prompt, directional Cherenkov light was separated from the slower, isotropic scintillation light using time information, and a maximum likelihood method was used to reconstruct the direction of individual scattered electrons. A clear directional signal was observed, correlated with the solar angle. The observation was aided by a period of low primary fluor concentration that resulted in a slower scintillator decay time. This is the first time that event-by-event direction reconstruction in high light-yield liquid scintillator has been demonstrated in a large-scale detector.

hep-ex

A na{\i}ve Bayesian graphical elastic net: driving advances in differential network analysis

Differential Networks (DNs), tools that encapsulate interactions within intricate systems, are brought under the Bayesian lens in this research. A novel na{\i}ve Bayesian adaptive graphical elastic net (BAE) prior is introduced to estimate the components of the DN. A heuristic structure determination mechanism and a block Gibbs sampler are derived. Performance is initially gauged on synthetic datasets encompassing various network topologies, aiming to assess and compare the flexibility to those of the Bayesian adaptive graphical lasso and ridge-type procedures. The na{\i}ve BAE estimator consistently ranks within the top two performers, highlighting its inherent adaptability. Finally, the BAE is applied to real-world datasets across diverse domains such as oncology, nephrology, and enology, underscoring its potential utility in comprehensive network analysis.

stat.ME

A Data Driven Bayesian Graphical Ridge Estimator

Bayesian methodologies prioritising accurate associations above sparsity in Gaussian graphical model (GGM) estimation remain relatively scarce in scientific literature. It is well accepted that the $\ell_2$ penalty enjoys a smaller computational footprint in GGM estimation, whilst the $\ell_1$ penalty encourages sparsity in the estimand. The Bayesian adaptive graphical lasso prior is used as a departure point in the formulation of a computationally efficient graphical ridge-type prior for events where accurate associations are prioritised over sparse representations. A novel block Gibbs sampler for simulating precision matrices is constructed using a ridge-type penalisation. The Bayesian graphical ridge-type prior is extended to a Bayesian adaptive graphical ridge-type prior. Synthetic experiments indicate that the graphical ridge-type estimators enjoy computational efficiency, in moderate dimensions, and numerical performance, for relatively non-sparse precision matrices, when compared to their lasso counterparts. The adaptive graphical ridge-type estimator is applied to cell signaling data to infer key associations between phosphorylated proteins in human T cell signalling. All computational workloads are carried out using the baygel R package.

stat.ME

Using spin alignment of inelastically-excited fast beams to make spin assignments: the spectroscopy of 13O as a test case

Excited states in 13O were investigated using inelastic scattering of an E/A=69.5-MeV 13O beam off of a 9Be target. The excited states were identified in the invariant-mass spectra of the decay products. Both single proton and sequential two-proton decays of the excited states were examined. For a number of the excited states, the protons were emitted with strong anisotropy where emissions transverse to the beam axis are favored. The measured proton-decay angular distributions were compared to predictions from distorted-wave born-approximation (DWBA) calculations of the spin alignment which was shown to be largely independent of the excitation mechanism. The deduced $^{13}$O level scheme is compared to ab initio no-core shell model with continuum (NCSMC) predictions. The lowest-energy excited states decay isotropically consistent with predictions of strong proton 1s1/2 structure. Above these states in the level scheme, we observed a number of higher-spin states not predicted within the model. Possibly these are associated with rotational bands built on deformed cluster configurations predicted by antisymmetrized molecular dynamics (AMD) calculations. The spin alignment mechanism is shown to be useful for making spin assignments and may have widespread use.

nucl-ex

TOI-220 $b$: a warm sub-Neptune discovered by TESS

In this paper we report the discovery of TOI-220 $b$, a new sub-Neptune detected by the Transiting Exoplanet Survey Satellite (TESS) and confirmed by radial velocity follow-up observations with the HARPS spectrograph. Based on the combined analysis of TESS transit photometry and high precision radial velocity measurements we estimate a planetary mass of 13.8 $\pm$ 1.0 M$_{Earth}$ and radius of 3.03 $\pm$ 0.15 R$_{Earth}$, implying a bulk density of 2.73 $\pm$ 0.47 $\textrm{g cm}^{-3}$. TOI-220 $b$ orbits a relative bright (V=10.4) and old (10.1$\pm$1.4 Gyr) K dwarf star with a period of $\sim$10.69 d. Thus, TOI-220 $b$ is a new warm sub-Neptune with very precise mass and radius determinations. A Bayesian analysis of the TOI-220 $b$ internal structure indicates that due to the strong irradiation it receives, the low density of this planet could be explained with a steam atmosphere in radiative-convective equilibrium and a supercritical water layer on top of a differentiated interior made of a silicate mantle and a small iron core.

astro-ph.EP

Performance of the ISS-CREAM calorimeter in a calibration beam test

The Cosmic Ray Energetics And Mass experiment for the International Space Station (ISS-CREAM) was installed on the ISS to measure high-energy cosmic-ray elemental spectra for the charge range $\rm Z=1$ to 26. The ISS-CREAM instrument includes a tungsten scintillating-fiber calorimeter preceded by a carbon target for energy measurements. The carbon target induces hadronic interactions, and showers of secondary particles develop in the calorimeter. The energy deposition in the calorimeter is proportional to the particle energy. As a predecessor to ISS-CREAM, the balloon-borne CREAM instrument was successfully flown seven times over Antarctica for a cumulative exposure of 191 days. The CREAM calorimeter demonstrated its capability to measure energies of cosmic-ray particles, and the ISS-CREAM calorimeter is expected to have a similar performance. Before the launch, an engineering-unit calorimeter was shipped to CERN for calibration and performance tests. This beam test included position, energy, and angle scans of electron and pion beams together with a high-voltage scan for calibration and characterization. Additionally, an attenuation effect in the scintillating fibers was studied. In this paper, beam test results, including corrections for the attenuation effect, are presented.

physics.ins-det

First direct measurement of $^{22}$Mg($\alpha$,p)$^{25}$Al and implications for X-ray burst model-observation comparisons

Type-I X-ray burst (XRB) light curves are sensitive to the model's nuclear input and consequently affects the model-observation comparisons. $^{22}$Mg($\alpha$,p)$^{25}$Al is among the most important reactions which directly impact the XRB light curve. We report the first direct measurement of $^{22}$Mg($\alpha$,p)$^{25}$Al using the Active Target Time Projection Chamber. XRB light curve model-observation comparison for the source $\tt{GS 1826-24}$ using new reaction rate implies a less-compact neutron star than previously inferred. Additionally, our result removes an important uncertainty in XRB model calculations that previously hindered extraction of the neutron star compactness.

nucl-ex