SearcharxivSearch

arXiv subjects

J. Terradas

Publications and source records attributed to J. Terradas.

At least 19 recordsLinked to original sources

Fast Bayesian spectral analysis using Convolutional Neural Networks: Applications over GONG H$\alpha$ solar data

Context. Solar filament oscillations have been observed for many years, but recent advances in telescope capabilities now enable daily monitoring of these periodic motions, offering valuable insights into the structure of filaments. A systematic study of filament oscillations over the solar cycle can shed light on the evolution of the prominences. Until now, only manual techniques have been used to analyze these oscillations. Aims. This work serves as a proof of concept, aiming to demonstrate the effectiveness of Convolutional Neural Networks (CNNs). These networks automatically detect filament oscillations by applying power-spectrum analysis to H$\alpha$ data from the GONG telescope network. Methods. The proposed technique studies periodic fluctuations of every pixel of the H$\alpha$ data cubes. Using the Lomb Scargle periodogram, we computed the power spectral density (PSD) of the dataset. The background noise is well fitted to a combination of red and white noise. Using Bayesian statistics and Markov chains -- Monte Carlo (MCMC) algorithms we can fit the spectra and determine the confidence threshold of a given percentage to search for real oscillations. We built two CNN models to obtain the same results as the MCMC approach. Results. We applied the CNN models to some observations reported in the literature, proving its reliability in detecting the same events as the classical methods. A day with events not previously reported has been studied to check for the model capabilities outside of a controlled dataset where we can check with previous reports. Conclusions. CNNs proved to be a useful tool to study solar filament oscillations, using spectral techniques. Computing times have been reduced significantly while getting results similar enough to the classical methods. This is a relevant step towards the automatic detection of filament oscillations.

astro-ph.SR

The influence of different coronal hole geometries on simulations of coronal wave -- coronal hole interaction

The geometry of a coronal hole (CH) affects the density profile of the reflected part of an incoming global coronal wave (CW). In this study, we perform for the first time magnetohydrodynamic (MHD) simulations of fast-mode MHD waves interacting with CHs of different geometries, such as circular, elliptic, convex, and concave shapes. We analyse the influence these geometries have on the density profiles of the reflected waves and we generate the corresponding simulation-based time-distance plots. Within these time-distance plots we determine regions that exhibit specific density features, such as large reflected density amplitudes. In a further step, these interaction features can be compared to actual observed CW-CH interaction events which makes it possible to explain interaction parameters from the observed interaction events, such as the density structure of the reflected wave, which are usually difficult to comprehensively understand by only analysing the measurements. Moreover, we show that the interaction between a concave shaped CH and CWs, whose density profile include an enhanced as well as a depleted wave, can lead to reflected density amplitudes that are more than two times larger than the incoming ones. Another effect of the interplay between the constructive and destructive interference of the reflected wave parts is a strongly depleted region in the middle of the CW-CH interaction process. In addition, we show how important the choice of the path is that is used to generate the time-distance plots and how this choice affects the interpretation of the CW-CH interaction results.

astro-ph.SR

The role of initial density profiles in simulations of coronal wave - coronal hole interaction

Interactions between global coronal waves (CWs) and coronal holes (CHs) reveal many interesting features of reflected waves and coronal hole boundaries (CHB) but have fairly been studied so far. Magnetohydrodynamic (MHD) simulations can help us to better understand what is happening during these interaction events, and therefore, to achieve a broader understanding of the parameters involved. In this study, we perform for the first time 2D MHD simulations of a CW-CH interaction including a realistic initial wave density profile that consists of an enhanced as well as a depleted wave part. We vary several initial parameters, such as the initial density amplitudes of the incoming wave, the CH density, and the CHB width, which are all based on actual measurements. We analyse the effects of different incident angles on the interaction features and we use the corresponding time-distance plots to detect specific features of the incoming and the reflected wave. We found that a particular combination of a small CH density, a realistic initial density profile and a sufficiently small incident angle leads to remarkable interaction features, such as a large density amplitude of the reflected wave with respect to the incoming one. The parameter studies in this paper provide a tool to compare time-distance plots based on observational measurements to those created from simulations and therefore enable us to derive interaction parameters from observed CW-CH interaction events that usually cannot be obtained directly. The simulation results in this study are augmented by analytical expressions for the reflection coefficient of the CW-CH interaction which allows us to verify the simulations results in an additional way. This work is the first of a series of studies aiming to finally reconstruct actual observed CW-CH interaction events by means of MHD-simulations.

astro-ph.SR

Extension and validation of the pendulum model for longitudinal solar prominence oscillations

Longitudinal oscillations in prominences are common phenomena on the Sun. These oscillations can be used to infer the geometry and intensity of the filament magnetic field. Previous theoretical studies of longitudinal oscillations made two simplifying assumptions: uniform gravity and semi-circular dips on the supporting flux tubes. However, the gravity is not uniform and realistic dips are not semi-circular. To understand the effects of including the nonuniform solar gravity on longitudinal oscillations, and explore the validity of the pendulum model with different flux-tube geometries. We first derive the equation describing the motion of the plasma along the flux tube including the effects of nonuniform gravity, yielding corrections to the original pendulum model. We also compute the full numerical solutions for the normal modes, and compare them with the new pendulum approximation. We have found that the nonuniform gravity introduces a significant modification in the pendulum model. We have also found a cut-off period, i.e. the longitudinal oscillations cannot have a period longer than 167 minutes. In addition, considering different tube geometries, the period depends almost exclusively on the radius of curvature at the bottom of the dip. We conclude that nonuniform gravity significantly modifies the pendulum model. These corrections are important for prominence seismology, because the inferred values of the radius of curvature and minimum magnetic-field strength differ substantially from those of the old model. However, we find that the corrected pendulum model is quite robust and is still valid for non-circular dips.

astro-ph.SR

Construction of coronal hole and active region magnetohydrostatic solutions in two dimensions: Force and energy balance

Coronal holes and active regions are typical magnetic structures found in the solar atmosphere. We propose several magnetohydrostatic equilibrium solutions that are representative of these structures in two dimensions. Our models include the effect of a finite plasma-$β$ and gravity, but the distinctive feature is that we incorporate a thermal structure with properties similar to those reported by observations. We developed a semi-analytical method to compute the equilibrium configuration. Using this method, we obtain cold and under-dense plasma structures in open magnetic fields representing coronal holes, while in closed magnetic configurations, we achieve the characteristic hot and over-dense plasma arrangements of active regions. Although coronal holes and active regions seem to be antagonistic structures, we find that they can be described using a common thermal structure that depends on the flux function. In addition to the force balance, the energy balance is included in the constructed models using an a posteriori approach. From the two-dimensional computation of thermal conduction and radiative losses in our models, we infer the required heating function to achieve energy equilibrium. We find that the temperature dependence on height is an important parameter that may prevent the system from accomplishing thermal balance at certain spatial locations. The implications of these results are discussed in detail.

astro-ph.SR

Kink oscillations of coronal loops

Kink oscillations of coronal loops, i.e., standing kink waves, is one of the most studied dynamic phenomena in the solar corona. The oscillations are excited by impulsive energy releases, such as low coronal eruptions. Typical periods of the oscillations are from a few to several minutes, and are found to increase linearly with the increase in the major radius of the oscillating loops. It clearly demonstrates that kink oscillations are natural modes of the loops, and can be described as standing fast magnetoacoustic waves with the wavelength determined by the length of the loop. Kink oscillations are observed in two different regimes. In the rapidly decaying regime, the apparent displacement amplitude reaches several minor radii of the loop. The damping time which is about several oscillation periods decreases with the increase in the oscillation amplitude, suggesting a nonlinear nature of the damping. In the decayless regime, the amplitudes are smaller than a minor radius, and the driver is still debated. The review summarises major findings obtained during the last decade, and covers both observational and theoretical results. Observational results include creation and analysis of comprehensive catalogues of the oscillation events, and detection of kink oscillations with imaging and spectral instruments in the EUV and microwave bands. Theoretical results include various approaches to modelling in terms of the magnetohydrodynamic wave theory. Properties of kink oscillations are found to depend on parameters of the oscillating loop, such as the magnetic twist, stratification, steady flows, temperature variations and so on, which make kink oscillations a natural probe of these parameters by the method of magnetohydrodynamic seismology.

astro-ph.SR

One dimensional prominence threads: I. Equilibrium models

Threads are the building blocks of solar prominences and very often show longitudinal oscillatory motions that are strongly attenuated with time. The damping mechanism responsible for the reported oscillations is not fully understood yet. To understand the oscillations and damping of prominence threads it is mandatory to investigate first the nature of the equilibrium solutions that arise under static conditions and under the presence of radiative losses, thermal conduction and background heating. This provides the basis to calculate the eigenmodes of the thread models. The nonlinear ordinary differential equations for hydrostatic and thermal equilibrium under the presence of gravity are solved using standard numerical techniques and simple analytical expressions are derived under certain approximations. The solutions to the equations represent a prominence thread, i.e., a dense and cold plasma region of a certain length that connects with the corona through a prominence corona transition region (PCTR). The solutions can also match with a chromospheric-like layer if a spatially dependent heating function localised around the footpoints is considered. We have obtained static solutions representing prominence threads and have investigated in detail the dependence of these solutions on the different parameters of the model. Among other results, we have shown that multiple condensations along a magnetic field line are possible, and that the effect of partial ionisation in the model can significantly modify the thermal balance in the thread and therefore their length. This last parameter is also shown to be comparable to that reported in the observations when the radiative losses are reduced for typical thread temperatures.

astro-ph.SR

Gravitational instability of solar prominence threads I. Curved magnetic fields without dips

Prominence threads are dense and cold structures lying on curved magnetic fields that can be suspended in the solar atmosphere against gravity. The gravitational stability of threads, in the absence of non-ideal effects, is comprehensively investigated in the present work by means of an elementary but effective model. Based on purely hydrodynamic equations in one spatial dimension and applying line-tying conditions at the footpoints of the magnetic field lines, we derive analytical expressions for the different feasible equilibria and the corresponding frequencies of oscillation. We find that the system allows for stable and unstable equilibrium solutions subject to the initial position of the thread, its density contrast and length, and the total length of the magnetic field lines. The transition between the two types of solutions is produced at specific bifurcation points that have been determined analytically in some particular cases. When the thread is initially at the top of the concave magnetic field, that is at the apex, we find a supercritical pitchfork bifurcation, while for a shifted initial thread position with respect to this point the symmetry is broken and the system is characterised by an S-shaped bifurcation. The plain results presented in this paper shed new light on the behaviour of threads in curved magnetic fields under the presence of gravity and help to interpret more complex numerical magnetohydrodynamics (MHD) simulations about similar structures.

astro-ph.SR

Geometrical properties of the interaction between oblique incoming coronal waves and coronal holes

Observations of coronal waves (CWs) interacting with coronal holes (CHs) show the formation of typical wave-like features, such as reflected, refracted and transmitted waves (collectively, secondary waves). In accordance with these observations, numerical evidence for the wave characteristics of CWs is given by simulations which demonstrate effects of deflection and reflection when a CW interacts with regions exhibiting a sudden density drop, such as CHs. However, secondary waves are usually weak in their signal and simulations are limited in the way the according idealisations have to be chosen. Hence, several properties of the secondary waves during a CW-CH interaction are unclear or ambiguous and might lead to misinterpretations. In this study we follow a theoretical approach and focus in particular on the geometrical properties of secondary waves caused by the interaction between oblique incoming CWs and CHs. Based on a linear theory, we derive analytical expressions for reflection and transmission coefficients, which tell us how strongly the amplitudes of the secondary waves increase and decrease with respect to the incoming wave, respectively. Additionally, we provide analytical terms for crucial incidence angles that are capable of giving information about the energy flux, the phase and the reflection properties of the secondary waves. These novel expressions provide a supplementary tool for estimating CW properties in a fast and straightforward way and, therefore, might have relevant consequences for a possible new interpretation of already studied CW-CH interaction events and the clarification of ambiguous observational data.

astro-ph.SR

A novel approach to identify resonant MHD wave modes in solar pores and sunspot umbrae: $B-ω$ analysis

The umbral regions of sunspots and pores in the solar photosphere are generally dominated by $3$~mHz oscillations, which are due to $p$-modes penetrating the magnetic region. In these locations, wave power is also significantly reduced with respect to the quiet Sun. However, here we study a pore where the power of the oscillations in the umbra is not only comparable, or even larger than that of the quiet Sun, but the main dominant frequency is not $3$~mHz as expected, but instead $5$~mHz. By combining Doppler velocities and spectropolarimetry and analysing the relationship between magnetic field strength and frequency, the resultant $B-ω$ diagram reveals distinct ridges which are remarkably clear signatures of resonant MHD oscillations confined within the pore umbra. In addition to velocity oscillations, we demonstrate that these modes are also accompanied by magnetic oscillations, as predicted from MHD theory. The novel technique of $B-ω$ analysis, proposed in this Letter, opens an exciting new avenue for identifying MHD wave modes in the umbral regions of both pores and sunspots.

astro-ph.SR

A new method for estimating global coronal wave properties from their interaction with solar coronal holes

Global coronal waves (CWs) and their interaction with coronal holes (CHs) result, among other effects, in the formation of reflected and transmitted waves. Observations of such events provide us with measurements of different CW parameters, such as phase speed and intensity amplitudes. However, several of these parameters are provided with only intermediate observational quality, other parameters, such as the phase speed of transmitted waves, can hardly be observed in general. We present a new method to estimate crucial CW parameters, such as density and phase speed of reflected as well as transmitted waves, Mach numbers and density values of the CH's interior, by using analytical expressions in combination with basic and most accessible observational measurements. The transmission and reflection coefficients are derived from linear theory and subsequently used to calculate estimations for phase speeds of incoming, reflected and transmitted waves. The obtained analytical expressions are validated by performing numerical simulations of CWs interacting with CHs. This new method enables to determine in a fast and straightforward way reliable CW and CH parameters from basic observational measurements which provides a powerful tool to better understand the observed interaction effects between CWs and CHs.

astro-ph.SR

3D numerical simulations of oscillations in solar prominences

Oscillations in solar prominences are a frequent phenomenon, and they have been the subject of many studies. A full understanding of the mechanisms that drive them and their attenuation has not been reached yet. We numerically investigate the periodicity and damping of transverse and longitudinal oscillations in a 3D model of a curtain-shaped prominence. We carried out a set of numerical simulations of vertical, transverse and longitudinal oscillations with the high-order finite-difference Pencil Code. We solved the ideal magnetohydrodynamic (MHD) equations for a wide range of parameters, including the width and density of the prominence, and the magnetic field strength (B) of the solar corona. We studied the periodicity and attenuation of the induced oscillations. We found that longitudinal oscillations can be fit with the pendulum model, whose restoring force is the field aligned component of gravity, but other mechanisms such as pressure gradients may contribute to the movement. On the other hand, transverse oscillations are subject to magnetic forces. The analysis of the parametric survey shows, in agreement with observational studies, that the oscillation period (P) increases with the prominence width. For transverse oscillations we obtained that P increases with density and decreases with B. For longitudinal oscillations we also found that P increases with density, but there are no variations with B. The attenuation of transverse oscillations was investigated by analysing the velocity distribution and computing the Alfvén continuum modes. We conclude that resonant absorption is the mean cause. Damping of longitudinal oscillations is due to some kind of shear numerical viscosity.

astro-ph.SR

Normal modes of transverse coronal loop oscillations from numerical simulations: I. Method and test case

The purpose of this work is to develop a procedure to obtain the normal modes of a coronal loop from time-dependent numerical simulations with the aim of better understanding observed transverse loop oscillations. To achieve this goal, in this paper we present a new method and test its performance with a problem for which the normal modes can be computed analytically. In a follow-up paper, the application to the simulations of \citet{rial2013} is tackled. The method proceeds iteratively and at each step consists of (i) a time-dependent numerical simulation followed by (ii) the Complex Empirical Orthogonal Function (CEOF) analysis of the simulation results. The CEOF analysis provides an approximation to the normal mode eigenfunctions that can be used to set up the initial conditions for the numerical simulation of the following iteration, in which an improved normal mode approximation is obtained. The iterative process is stopped once the global difference between successive approximate eigenfunctions is below a prescribed threshold. The equilibrium used in this paper contains material discontinuities that result in one eigenfunction with a jump across these discontinuities and two eigenfunctions whose normal derivatives are discontinuous there. After 6 iterations, the approximation to the frequency and eigenfunctions are accurate to $\lesssim 0.7$\% except for the eigenfunction with discontinuities, which displays a much larger error at these positions.

astro-ph.SR

Effect of magnetic twist on nonlinear transverse kink oscillations

Magnetic twist is thought to play an important role in many structures of the solar atmosphere. One of the effects of twist is to modify the properties of the eigenmodes of magnetic tubes. In the linear regime standing kink solutions are characterized by a change in polarization of the transverse displacement along the twisted tube. In the nonlinear regime, magnetic twist affects the development of shear instabilities that appear at the tube boundary when it is oscillating laterally. These Kelvin-Helmholtz instabilities (KHI) are produced either by the jump in the azimuthal component of the velocity at the edge of the sharp boundary between the internal and external part of the tube, or either by the continuous small length-scales produced by phase-mixing when there is a smooth inhomogeneous layer. In this work the effect of twist is consistently investigated by solving the time-dependent problem including the process of energy transfer to the inhomogeneous layer. It is found that twist always delays the appearance of the shear instability but for tubes with thin inhomogeneous layers the effect is relatively small for moderate values of twist. On the contrary, for tubes with thick layers, the effect of twist is much stronger. This can have some important implications regarding observations of transverse kink modes and the KHI itself.

astro-ph.SR

The effects of magnetic-field geometry on longitudinal oscillations of solar prominences: Cross-sectional area variation for thin tubes

Solar prominences are subject to both field-aligned (longitudinal) and transverse oscillatory motions, as evidenced by an increasing number of observations. Large-amplitude longitudinal motions provide valuable information on the geometry of the filament-channel magnetic structure that supports the cool prominence plasma against gravity. Our pendulum model, in which the restoring force is the gravity projected along the dipped field lines of the magnetic structure, best explains these oscillations. However, several factors can influence the longitudinal oscillations, potentially invalidating the pendulum model. The aim of this work is to study the influence of large-scale variations in the magnetic field strength along the field lines, i.e., variations of the cross-sectional area along the flux tubes supporting prominence threads. We studied the normal modes of several flux tube configurations, using linear perturbation analysis, to assess the influence of different geometrical parameters on the oscillation properties. We found that the influence of the symmetric and asymmetric expansion factors on longitudinal oscillations is small.}{We conclude that the longitudinal oscillations are not significantly influenced by variations of the cross-section of the flux tubes, validating the pendulum model in this context.

astro-ph.SR

Solar prominences embedded in flux ropes: morphological features and dynamics from 3D MHD simulations

The temporal evolution of a solar prominence inserted in a three-dimensional magnetic flux rope is investigated numerically. Using the model of Titov Demoulin (1999) under the regime of weak twist, the cold and dense prominence counteracts gravity by modifying the initially force-free magnetic configuration. In some cases a quasi-stationary situation is achieved after the relaxation phase, characterized by the excitation of standing vertical oscillations. These oscillations show a strong attenuation with time produced by the mechanism of continuum damping due to the inhomogeneous transition between the prominence and solar corona. The characteristic period of the vertical oscillations does not depend strongly on the twist of the flux rope. Nonlinearity is the responsible for triggering the Kelvin-Helmholtz instability associated to the vertical oscillations and that eventually produces horizontal structures. Contrary to other configurations in which the longitudinal axis of the prominence is permeated by a perpendicular magnetic field, like in unsheared arcades, the orientation of the prominence along the flux rope axis prevents the development of Rayleigh-Taylor instabilities and therefore the appearance of vertical structuring along this axis.

astro-ph.SR

On the robustness of the pendulum model for large-amplitude longitudinal oscillations in prominences

Large-amplitude longitudinal oscillations (LALOs) in prominences are spectacular manifestations of the solar activity. In such events nearby energetic disturbances induce periodic motions on filaments with displacements comparable to the size of the filaments themselves and with velocities larger than 20 km/s. The pendulum model, in which the gravity projected along a rigid magnetic field is the restoring force, was proposed to explain these events. However, it can be objected that in a realistic situation where the magnetic field reacts to the mass motion of the heavy prominence, the simplified pendulum model could be no longer valid. We have performed non-linear time-dependent numerical simulations of LALOs considering a dipped magnetic field line structure. In this work we demonstrate that for even relatively weak magnetic fields the pendulum model works very well. We therefore validate the pendulum model and show its robustness, with important implications for prominence seismology purposes. With this model it is possible to infer the geometry of the dipped field lines that support the prominence.

astro-ph.SR

Dynamics of coronal rain and descending plasma blobs in solar prominences: II. partially ionized case

Coronal rain clumps and prominence knots are dense condensations with chromospheric to transition region temperatures that fall down in the much hotter corona. Their typical speeds are in the range 30--150~km~s$^{-1}$ and of the order of 10--30~km~s$^{-1}$, respectively, i.e., they are considerably smaller than free fall velocities. These cold blobs contain a mixture of ionized and neutral material that must be dynamically coupled in order to fall together, as observed. We investigate this coupling by means of hydrodynamic simulations in which the coupling arises from the friction between ions and neutrals. The numerical simulations presented here are an extension of those of \citet{oliver2014} to the partially ionized case. We find that, although the relative drift speed between the two species is smaller than 1~m~s$^{-1}$ at the blob center, it is sufficient to produce the forces required to strongly couple charged particles and neutrals. The ionization degree has no discernible effect on the main results of our previous work for a fully ionized plasma: the condensation has an initial acceleration phase followed by a period with roughly constant velocity and, in addition, the maximum descending speed is clearly correlated with the ratio of initial blob to environment density.

astro-ph.SR