arXiv subjects

J. Varela

Publications and source records attributed to J. Varela.

At least 37 records · Page 2Linked to original sources

arXiv2025

J-PAS: Discovery of RaJav, a bright spatially extended Ly$α$ Nebula at z=2.25

We report the discovery of a massive and potentially largest Ly$α$ Nebula, RaJav, at z=2.25, associated with a quasar pair: the bright SDSS~J162029.07+433451.1 (hereafter J1620+4334) and the faint newly discovered quasar JPAS-9600-10844, at 2.265 $\pm$ 0.021 using the early data release (17 deg$^{2}$) of the J-PAS. The quasar JPAS-9600-10844 embedded in the nebula is located at ~ 60.2 kpc (7.3'') from J1620+4334, and shows a compact structure with broad emission lines (> 3000 km/s), typical of active galactic nuclei. At a 2$σ$ surface brightness (SB) contour of $\sim 1.86 \times 10^{-16}$ erg s$^{-1}$ cm$^{-2}$ arcsec$^{-2}$, the nebula extends > 100 kpcs and has a total Ly$α$ luminosity of $\sim 5.8 \pm 0.7 \times 10^{44}$ erg s$^{-1}$ signify the presence of a giant Enormous Ly$α$ Nebula (ELAN). The nebula traces an over density of quasars at redshift of 2.2-2.3 consistent with the progenitor of a massive galaxy cluster. The extended CIV emission indicates that the circum-galactic medium (CGM) is metal-enriched and not primordial. The current J-PAS observations suggest photoionization and shocks due to outflows as possible ionization mechanisms. The faint extended FUV and NUV continuum emission likely points to ongoing star formation around the two quasars, suggesting a complex interaction in their environments. These findings provide new insights into the environment of quasars and their role in shaping the dynamics and evolution of the CGM at cosmic noon. Further spectroscopic observations will be required to fully characterize the object's nature and its kinematic properties. This study demonstrates the unique capability of J-PAS to detect massive and rare Ly$α$ nebulae, providing new insights into their properties, environments, and connections to large-scale structures in the cosmic web such as filaments and overdensities in a large cosmological volume.

astro-ph.GA↗

arXiv2025

J-PLUS: Understanding outlier white dwarfs in the third data release via dimensionality reduction

We present the white dwarf catalog derived from the third data release of the Javalambre Photometric Local Universe Survey (J-PLUS DR3), which covers 3284 deg2 using 12 optical filters. A particular focus is given to the classification of outlier sources. We applied a Bayesian fitting process to the 12-band J-PLUS photometry of white dwarf candidates from Gaia EDR3. The derived parameters were effective temperature, surface gravity, and parallax. We used theoretical models from H- and He-dominated atmospheres, with priors applied to parallax and spectral type. From the posteriors, we derived the probability of an H-dominated atmosphere and of calcium absorption for each source. Outliers were identified as sources with chi2 > 23.2, indicating significant deviations from the best-fitting model. We analyzed the residuals from the fits using the UMAP technique, which enables the classification of outliers into distinct categories. The catalog includes 14844 white dwarfs with r < 20 mag and 1 < parallax < 100 mas, with 72% of the sources lacking spectroscopic (R > 500) classification. The application of UMAP identified three main types of outliers: random measurement fluctuations (391 sources), metal-polluted white dwarfs (98 sources), and two-component systems (282 sources). The last category also includes white dwarfs with strong carbon absorption lines. We validated the J-PLUS classifications by comparison with spectroscopy from SDSS and DESI, and with Gaia BP/RP spectra, confirming a one-to-one correspondence between J-PLUS photometric and spectroscopic classifications. The J-PLUS DR3 white dwarf catalog provides a robust dataset for statistical studies. The use of dimensionality reduction techniques enhances the identification of peculiar objects, making this catalog a valuable resource for the selection of interesting targets such as metal-polluted white dwarfs or binary systems.

astro-ph.SR↗

arXiv2025

The J-PLUS collaboration. Additive versus multiplicative systematics in surveys of the large scale structure of the Universe

Observational and/or astrophysical systematics modulating the observed number of luminous tracers can constitute a major limitation in the cosmological exploitation of surveys of the large scale structure of the universe. Part of this limitation arises on top of our ignorance on how such systematics actually impact the observed galaxy/quasar fields. In this work we develop a generic, hybrid model for an arbitrary number of systematics that may modulate observations in both an additive and a multiplicative way, after applying a nonlinear power law transformation. This model allows us devising a novel algorithm that addresses the identification and correction for either additive and/or multiplicative contaminants. We test this model on galaxy mocks and systematics templates inspired from data of the third data release of the {\it Javalambre Photometric Local Universe Survey} (J-PLUS). We find that our method clearly outperforms standard methods that assume either an additive or multiplicative character for all contaminants in scenarios where both characters are actually acting on the observed data. In simpler scenarios where only an additive or multiplicative imprint on observations is considered, our hybrid method does not lie far behind the corresponding simplified, additive/multiplicative methods. Nonetheless, in scenarios of mild/low impact of systematics, we find that our hybrid approach converges towards the standard method that assumes additive contamination, as predicted by our model describing systematics. Our methodology also allows for the estimation of biases induced by systematics residuals on different angular scales and under different observational configurations, although these predictions necessarily restrict to the subset of {\em known/identified} potential systematics, and say nothing about ``unknown unknowns" possibly impacting the data.

astro-ph.CO↗

arXiv2025

J-PLUS: Tomographic analysis of galaxy angular density and redshift fluctuations in Data Release 3. Constraints on photo-$z$ errors, linear bias, and peculiar velocities

The {\it Javalambre Photometric Local Universe Survey} (J-PLUS) is a {\it spectro-photometric} survey covering about 3,000~deg$^2$ in its third data release (DR3), and containing about 300,000 galaxies with high quality ({\it odds}$>0.8$) photometric redshifts (hereafter photo-$z$s). We use this galaxy sample to conduct a tomographic study of the counts and redshift angular fluctuations under Gaussian shells sampling the redshift range $z\in[0.05,0.25]$. We confront the angular power spectra of these observables measured under shells centered on 11 different redshifts with theoretical expectations derived from a linear Boltzmann code ({\tt ARFCAMB}). Overall we find that J-PLUS DR3 data are well reproduced by our linear, simplistic model. We obtain that counts (or density) angular fluctuations (hereafter ADF) are very sensitive to the linear galaxy bias $b_g(z)$, although weakly sensitive to radial peculiar velocities of the galaxy field, while suffering from systematics residuals for $z>0.15$. Angular redshift fluctuations (ARF), instead, show higher sensitivity to radial peculiar velocities and also higher sensitivity to the average uncertainty in photo-$z$s ($σ_{\rm Err}$), with no obvious impact from systematics. For $z<0.15$ both ADF and ARF agree on measuring a monotonically increasing linear bias varying from $b_g(z=0.05)\simeq 0.9\pm 0.06$ up to $b_g(z=0.15)\simeq 1.5\pm 0.05$, while, by first time, providing consistent measurements of $σ_{\rm Err}(z)\sim 0.014$ that are $\sim 40~\%$ higher than estimates from the photo-$z$ code {\tt LePhare}, ($σ_{\rm Err}^{\rm LePhare}=0.010$). As expected, this photo-$z$ uncertainty level prevents the detection of radial peculiar velocities in the modest volume sampled by J-PLUS DR3, although prospects for larger galaxy surveys of similar (and higher) photo-$z$ precision are promising.

astro-ph.CO↗

arXiv2025

Spatially resolved stellar populations and emission lines properties in nearby galaxies with J-PLUS -- I. Method and first results for the M101 group

Spatially resolved maps of stellar populations and nebular emission are key tools for understanding the physical properties and evolutionary stages of galaxies. We aim to characterize the spatially resolved stellar population and emission line properties of galaxies in the M101 group using Javalambre Photometric Local Universe Survey (J-PLUS) data. The datacubes first go through pre-processing steps, which include masking, noise suppression, PSF homogenization, and spatial binning. The improved data are then analyzed with the spectral synthesis code \alstar, which has been previously shown to produce excellent results with the unique 12 bands filter system of J-PLUS and S-PLUS. We produce maps of stellar mass surface density ($Σ_\star$), mean stellar age and metallicity, star formation rate surface density ($Σ_{\rm SFR}$), dust attenuation, and emission line properties such as fluxes and equivalent widths of the main optical lines. Relations among these properties are explored. All galaxies exhibit a well-defined age-$Σ_\star$ relation, except for the dwarfs. Similarly, all of the galaxies follow local $Σ_\star$-$Σ_{\rm SFR}$ star-forming MS relations, with specific star formation rates that grow for less massive systems. A stellar $Σ_\star$-metallicity relation is clearly present in M101, while other galaxies have either flatter or undefined relations. Nebular metallicities correlate with $Σ_\star$ for all galaxies. This study demonstrates the ability of J-PLUS to perform IFS-like analysis of galaxies, offering robust spatially resolved measurements of stellar populations and emission lines over large fields of view. The M101 group analysis showcases the potential for expanding such studies to other groups and clusters, contributing to the understanding of galaxy evolution across different environments.

astro-ph.GA↗

arXiv2025

MHD Simulations Preliminarily Predict The Habitability and Radio Emission of TRAPPIST-1e

As the closest Earth-like exoplanet within the habitable zone of the M-dwarf star TRAPPIST-1, TRAPPIST-1e exhibits a magnetic field topology that is dependent on space weather conditions. Variations in these conditions influence its habitability and contribute to its radio emissions. Our objective is to analyze the response of different terrestrial magnetosphere structures of TRAPPIST-1e to various space weather conditions, including events analogous to coronal mass ejections (CMEs). We assess its habitability by computing the magnetopause standoff distance and predict the resulting radio emissions using scaling laws. This study provides some priors for future radio observations. We perform three-dimensional magnetohydrodynamic (MHD) simulations of the TRAPPIST-1e system using the PLUTO code in spherical coordinates. Our analysis indicates that the predicted habitability and radio emission of TRAPPIST-1e strongly depend on the planet's magnetic field intensity and magnetic axis inclination. Within sub-Alfvenic, super-Alfvenic, and transitional stellar wind regimes, the radio emission intensity positively correlates with both planetary magnetic field strength and axial tilt, while planetary habitability, quantified by the magnetopause standoff distance, shows a positive correlation with magnetic field strength and a negative correlation with magnetic axis tilt...

astro-ph.EP↗

arXiv2025

The J-PAS survey: The effect of photometric redshift errors on cosmic voids

We investigated the impact of photometric redshift errors in the ongoing Javalambre Physics of the Accelerating Universe Astrophysical Survey (J-PAS) on void identification and properties using a watershed-based method, aiming to assess the recovery of individual voids and the overall void environment. We created galaxy mock catalogues for redshift z = 0.1 using the IllustrisTNG300-1 simulation, defining two datasets: an $ideal$ sample ($m_r < 21$ mag) and a $perturbed$ sample with the Z-coordinate errors mimicking J-PAS's line-of-sight errors, derived from the precursor miniJPAS survey data. We identified voids using ZOBOV, a watershed algorithm. We found 1065 voids in the $ideal$ sample and 2558 voids in the $perturbed$ sample. The $perturbed$ sample voids have, on average, smaller sizes and denser interiors. We filtered out voids based on density and radius in order to eliminate overdense and small spurious instances. The stacked density profile of filtered voids in the $perturbed$ sample remains close to the average density even at the boundary peak, indicating a strong blurring of structures by the redshift errors. The number of $ideal$ sample voids for which at least $50\%$ of the volume is recovered by a void in the $perturbed$ sample is 53 (29 for the filtered sample). The volume occupied by these voids is less than $10\%$ of the simulation volume. Merging voids in the $perturbed$ sample marginally improves the recovery. The overall volumes defined as voids in the two samples have an overlap of $80\%$, making up $61\%$ of the simulation box volume. While some statistical properties of voids might be recovered sufficiently well, the watershed algorithms may not be optimal for recovering the large-scale structure voids if applied straight to photometric redshift survey data.

astro-ph.CO↗

arXiv2024

Optimization of LYSO crystals and SiPM parameters for the CMS MIP timing detector

For the High-Luminosity (HL-LHC) phase, the upgrade of the Compact Muon Solenoid (CMS) experiment at CERN will include a novel MIP Timing Detector (MTD). The central part of MTD, the barrel timing layer (BTL), is designed to provide a measurement of the time of arrival of charged particles with a precision of 30 ps at the beginning of HL-LHC, progressively degrading to 60 ps while operating in an extremely harsh radiation environment for over a decade. In this paper we present a comparative analysis of the time resolution of BTL module prototypes made of LYSO:Ce crystal bars read out by silicon photo-multipliers (SiPMs). The timing performance measured in beam test campaigns is presented for prototypes with different construction and operation parameters, such as different SiPM cell sizes (15, 20, 25 and 30 $\rm μm$), SiPM manufacturers and crystal bar thicknesses. The evolution of time resolution as a function of the irradiation level has been studied using non-irradiated SiPMs as well as SiPMs exposed up to $2\times 10^{14}~n_{eq}/cm^2$ fluence. The key parameters defining the module time resolution such as SiPM characteristics (gain, photon detection efficiency, radiation induced dark count rate) and crystal properties (light output and dimensions) are discussed. These results have informed the final choice of the MTD barrel sensor configuration and offer a unique starting point for the design of future large-area scintillator-based timing detectors in either low or high radiation environments.

physics.ins-det↗

arXiv2024

J-PLUS: The fraction of calcium white dwarfs along the cooling sequence

We used the Javalambre Photometric Local Universe Survey (J-PLUS) DR2 photometry in twelve optical bands over 2176 deg2 to estimate the fraction of white dwarfs with presence of CaII H+K absorption along the cooling sequence. We compared the J-PLUS photometry against metal-free theoretical models to estimate the equivalent width in the J0395 passband of 10 nm centered at 395 nm (EW_J0395), a proxy to detect calcium absorption. A total of 4399 white dwarfs within 30000 > Teff > 5500 K and mass M > 0.45 Msun were analyzed. Their EW_J0395 distribution was modeled using two populations, corresponding to polluted and non-polluted systems, to estimate the fraction of calcium white dwarfs (f_Ca) as a function of Teff. The probability for each individual white dwarf of presenting calcium absorption, pca, was also computed. The comparison with both the measured Ca/He abundance and the metal pollution from spectroscopy shows that EW_J0395 correlates with the presence of calcium. The fraction of calcium white dwarfs increases from f_Ca = 0 at Teff = 13500 K to f_Ca = 0.15 at Teff = 5500 K. We compare our results with the fractions derived from the 40 pc spectroscopic sample and from SDSS spectra. The trend found in J-PLUS observations is also present in the 40 pc sample, however SDSS shows a deficit of metal-polluted objects at Teff < 12000 K. Finally, we found 39 white dwarfs with pca > 0.99. Twenty of them have spectra presented in previous studies, whereas we observed six additional targets. These 26 objects were all confirmed as metal-polluted systems. The J-PLUS optical data provide a robust statistical measurement for the presence of CaII H+K absorption in white dwarfs. We find a 15 +- 3 % increase in the fraction of calcium white dwarfs from Teff = 13500 K to 5500 K, which reflects their selection function in the optical from the total population of metal-polluted systems.

astro-ph.SR↗

arXiv2024

J-PLUS: Bayesian object classification with a strum of BANNJOS

With its 12 optical filters, the Javalambre-Photometric Local Universe Survey (J-PLUS) provides an unprecedented multicolor view of the local Universe. The third data release (DR3) covers 3,192 deg$^2$ and contains 47.4 million objects. However, the classification algorithms currently implemented in its pipeline are deterministic and based solely on the sources morphology. Our goal is classify the sources identified in the J-PLUS DR3 images into stars, quasi-stellar objects (QSOs), and galaxies. For this task, we present BANNJOS, a machine learning pipeline that uses Bayesian neural networks to provide the probability distribution function (PDF) of the classification. BANNJOS is trained on photometric, astrometric, and morphological data from J-PLUS DR3, Gaia DR3, and CatWISE2020, using over 1.2 million objects with spectroscopic classification from SDSS DR18, LAMOST DR9, DESI EDR, and Gaia DR3. Results are validated using $1.4 10^5$ objects and cross-checked against theoretical model predictions. BANNJOS outperforms all previous classifiers in terms of accuracy, precision, and completeness across the entire magnitude range. It delivers over 95% accuracy for objects brighter than $r = 21.5$ mag, and ~90% accuracy for those up to $r = 22$ mag, where J-PLUS completeness is < 25%. BANNJOS is also the first object classifier to provide the full probability distribution function (PDF) of the classification, enabling precise object selection for high purity or completeness, and for identifying objects with complex features, like active galactic nuclei with resolved host galaxies. BANNJOS has effectively classified J-PLUS sources into around 20 million galaxies, 1 million QSOs, and 26 million stars, with full PDFs for each, which allow for later refinement of the sample. The upcoming J-PAS survey, with its 56 color bands, will further enhance BANNJOS's ability to detail each source's nature.

astro-ph.GA↗

arXiv2024

TOFHIR2: The readout ASIC of the CMS Barrel MIP Timing Detector

The CMS detector will be upgraded for the HL-LHC to include a MIP Timing Detector (MTD). The MTD will consist of barrel and endcap timing layers, BTL and ETL respectively, providing precision timing of charged particles. The BTL sensors are based on LYSO:Ce scintillation crystals coupled to SiPMs with TOFHIR2 ASICs for the front-end readout. A resolution of 30-60 ps for MIP signals at a rate of 2.5 Mhit/s per channel is expected along the HL-LHC lifetime. We present an overview of the TOFHIR2 requirements and design, simulation results and measurements with TOFHIR2 ASICs. The measurements of TOFHIR2 associated to sensor modules were performed in different test setups using internal test pulses or blue and UV laser pulses emulating the signals expected in the experiment. The measurements show a time resolution of 24 ps initially during Beginning of Operation (BoO) and 58 ps at End of Operation (EoO) conditions, matching well the BTL requirements. We also showed that the time resolution is stable up to the highest expected MIP rate. Extensive radiation tests were performed, both with x-rays and heavy ions, showing that TOFHIR2 is not affected by the radiation environment during the experiment lifetime.

physics.ins-det↗

arXiv2024

The miniJPAS survey: Maximising the photo-z accuracy from multi-survey datasets with probability conflation

We present a new method for obtaining photometric redshifts (photo-z) for sources observed by multiple photometric surveys using a combination (conflation) of the redshift probability distributions (PDZs) obtained independently from each survey. The conflation of the PDZs has several advantages over the usual method of modelling all the photometry together, including modularity, speed, and accuracy of the results. Using a sample of galaxies with narrow-band photometry in 56 bands from J-PAS and deeper grizy photometry from the Hyper-SuprimeCam Subaru Strategic program (HSC-SSP), we show that PDZ conflation significantly improves photo-z accuracy compared to fitting all the photometry or using a weighted average of point estimates. The improvement over J-PAS alone is particularly strong for i>22 sources, which have low signal-to-noise ratio in the J-PAS bands. For the entire i<22.5 sample, we obtain a 64% (45%) increase in the number of sources with redshift errors |Dz|<0.003, a factor 3.3 (1.9) decrease in the normalised median absolute deviation of the errors (sigma_NMAD), and a factor 3.2 (1.3) decrease in the outlier rate compared to J-PAS (HSC-SSP) alone. The photo-z accuracy gains from combining the PDZs of J-PAS with a deeper broadband survey such as HSC-SSP are equivalent to increasing the depth of J-PAS observations by ~1.2--1.5 magnitudes. These results demonstrate the potential of PDZ conflation and highlight the importance of including the full PDZs in photo-z catalogues.

astro-ph.GA↗

arXiv2023

The miniJPAS survey: Optical detection of galaxy clusters with PZWav

Galaxy clusters are an essential tool to understand and constrain the cosmological parameters of our Universe. Thanks to its multi-band design, J-PAS offers a unique group and cluster detection window using precise photometric redshifts and sufficient depths. We produce galaxy cluster catalogues from the miniJPAS, which is a pathfinder survey for the wider J-PAS survey, using the PZWav algorithm. Relying only on photometric information, we provide optical mass tracers for the identified clusters, including richness, optical luminosity, and stellar mass. By reanalysing the Chandra mosaic of the AEGIS field, alongside the overlapping XMM-Newton observations, we produce an X-ray catalogue. The analysis reveals the possible presence of structures with masses of 4$\times 10^{13}$ M$_\odot$ at redshift 0.75, highlighting the depth of the survey. Comparing results with those from two other cluster catalogues, provided by AMICO and VT, we find $43$ common clusters with cluster centre offsets of 100$\pm$60 kpc and redshift differences below 0.001. We provide a comparison of the cluster catalogues with a catalogue of massive galaxies and report on the significance of cluster selection. In general, we are able to recover approximately 75$\%$ of the galaxies with $M^{\star} >$2$\times 10^{11}$ M$_\odot$. This study emphasises the potential of the J-PAS survey and the employed techniques down to the group scales.

astro-ph.CO↗

arXiv2023

The miniJPAS survey. Evolution of the luminosity and stellar mass functions of galaxies up to $z \sim 0.7$

We aim at developing a robust methodology for constraining the luminosity and stellar mass functions (LMFs) of galaxies by solely using data from multi-filter surveys and testing the potential of these techniques for determining the evolution of the miniJPAS LMFs up to $z\sim0.7$. Stellar mass and $B$-band luminosity for each of the miniJPAS galaxies are constrained using an updated version of the SED-fitting code MUFFIT, whose values are based on composite stellar population models and the probability distribution functions of the miniJPAS photometric redshifts. Galaxies are classified through the stellar mass versus rest-frame colour diagram corrected for extinction. Different stellar mass and luminosity completeness limits are set and parametrised as a function of redshift, for setting limits in our flux-limited sample ($r_\mathrm{SDSS}<22$). The miniJPAS LMFs are parametrised according to Schechter-like functions via a novel maximum likelihood method accounting for uncertainties, degeneracies, probabilities, completeness, and priors. Overall, our results point to a smooth evolution with redshift ($0.05 10.7$).

astro-ph.GA↗

arXiv2023

Slow-mode rarefaction and compression fronts in the Hermean magnetosphere: From MESSENGER insights to future BepiColombo observations

Context. Standing slow-mode rarefaction and compression front structures may appear in the Mercury magnetosheath under particular solar wind conditions. Aims. The aim of the study is to identify the wind conditions required for the formation of slow-mode structures (SMS) in the Mercury magnetosphere by comparing MESSENGER magnetometer data and magnetohydrodynamics simulations. Methods. We used the magnetohydrodynamics code PLUTO in spherical coordinates to reproduce the interaction of the solar wind with the Mercury magnetosphere. First, the optimal wind conditions for the SMS formation were identified with respect to the orientation of the interplanetary magnetic field (IMF) and dynamic pressure. Next, the magnetic field calculated in the simulations along the MESSENGER trajectory was compared to MESSENGER magnetometer data to identify tracers of the satellite encounter with the SMS. Results. Optimal wind conditions for the formation of SMS require that the IMF is oriented in the northward or radial directions. The MESSENGER orbit on 8th September 2011 takes place during wind conditions that are close to the optimal configuration for SMS formation near the north pole, leading to the possible intersection of the satellite trajectory with the SMS. MESSENGER magnetometer data show a rather strong decrease in the magnetic field module after the satellite crossed nearby the compression front that is observed in the simulation, providing indirect evidence of the SMS.

astro-ph.EP↗

arXiv2023

On Earth's habitability over the Sun's main-sequence history: joint influence of space weather and Earth's magnetic field evolution

The aim of this study is to analyze the Earth habitability with respect to the direct exposition of the Earth atmosphere to the solar wind along the Suns evolution on the main sequence including the realistic evolution of the space weather conditions and the Earth magnetic field. The MHD code PLUTO in spherical coordinates is applied to perform parametric studies with respect to the solar wind dynamic pressure and the interplanetary magnetic field intensity for different Earth magnetic field configurations. Quiet space weather conditions may not impact the Earth habitability. On the other hand, the impact of interplanetary coronal mass ejections (ICME) could lead to the erosion of the primary Earth atmosphere during the Hadean eon. A dipolar field of 30 microT is strong enough to shield the Earth from the Eo-Archean age as well as 15 and 5 microT dipolar fields from the Meso-Archean and Meso-Proterozoic, respectively. Multipolar weak field period during the Meso-Proterozoic age may not be a threat for ICME-like space weather conditions if the field intensity is at least 15 microT and the ratio between the quadrupolar (Q) and dipolar (D) coefficients is Q/D <= 0.5. By contrast, the Earth habitability in the Phanerozoic eon (including the present time) can be hampered during multipolar low field periods with a strength of 5 microT and Q/D >= 0.5 associated to geomagnetic reversals. Consequently, the effect of the solar wind should be considered as a possible driver of Earth's habitability.

astro-ph.EP↗

arXiv2023

J-PLUS DR3: Galaxy-Star-Quasar classification

The Javalambre Photometric Local Universe Survey (J-PLUS) is a 12-band photometric survey using the 83-cm JAST telescope. Data Release 3 includes 47.4 million sources. J-PLUS DR3 only provides star-galaxy classification so that quasars are not identified from the other sources. Given the size of the dataset, machine learning methods could provide a valid alternative classification and a solution to the classification of quasars. Our objective is to classify J-PLUS DR3 sources into galaxies, stars and quasars, outperforming the available classifiers in each class. We use an automated machine learning tool called TPOT to find an optimized pipeline to perform the classification. The supervised machine learning algorithms are trained on the crossmatch with SDSS DR18, LAMOST DR8 and Gaia. We checked that the training set of about 660 thousand galaxies, 1.2 million stars and 270 thousand quasars is both representative and contain a minimal presence of contaminants (less than 1%). We considered 37 features: the twelve photometric bands with respective errors, six colors, four morphological parameters, galactic extinction with its error and the PSF relative to the corresponding pointing. With TPOT genetic algorithm, we found that XGBoost provides the best performance: the AUC for galaxies, stars and quasars is above 0.99 and the average precision is above 0.99 for galaxies and stars and 0.96 for quasars. XGBoost outperforms the classifiers already provided in J-PLUS DR3 and also classifies quasars.

astro-ph.GA↗

arXiv2023

J-PLUS: Photometric Re-calibration with the Stellar Color Regression Method and an Improved Gaia XP Synthetic Photometry Method

We employ the corrected Gaia Early Data Release 3 (EDR3) photometric data and spectroscopic data from the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) DR7 to assemble a sample of approximately 0.25 million FGK dwarf photometric standard stars for the 12 J-PLUS filters using the Stellar Color Regression (SCR) method. We then independently validated the J-PLUS DR3 photometry, and uncovered significant systematic errors: up to 15 mmag in the results of Stellar Locus (SL) method, and up to 10 mmag mainly caused by magnitude-, color-, and extinction-dependent errors of the Gaia XP spectra with the Gaia BP/RP (XP) Synthetic Photometry (XPSP) method. We have also further developed the XPSP method using the corrected Gaia XP spectra by Huang et al. (2023) and applied it to the J-PLUS DR3 photometry. This resulted in an agreement of 1-5 mmag with the SCR method, and a two-fold improvement in the J-PLUS zero-point precision. Finally, the zero-point calibration for around 91% of the tiles within the LAMOST observation footprint is determined through the SCR method, with the remaining approximately 9% of tiles outside this footprint relying on the improved XPSP method. The re-calibrated J-PLUS DR3 photometric data establishes a solid data foundation for conducting research that depends on high-precision photometric calibration.

astro-ph.SR↗