Searcharxiv⌕ Search

arXiv subjects

J. Varela

Publications and source records attributed to J. Varela.

At least 109 records · Page 6Linked to original sources

Effect of the exoplanet magnetic field topology on its magnetospheric radio emission

The magnetized wind from stars that impact exoplanets should lead to radio emissions. According to the scaling laws derived in the solar system, the radio emission should depend on the stellar wind, interplanetary magnetic field, and topology of the exoplanet magnetosphere. The aim of this study is to calculate the dissipated power and subsequent radio emission from exoplanet magnetospheres with different topologies perturbed by the interplanetary magnetic field and stellar wind, to refine the predictions from scaling laws, and to prepare the interpretation of future radio detections. We use the magnetohydrodynamic (MHD) code PLUTO in spherical coordinates to analyze the total radio emission level resulting from the dissipation of the kinetic and magnetic (Poynting flux) energies inside the exoplanet's magnetospheres. We apply a formalism to infer the detailed contribution in the exoplanet radio emission on the exoplanet's day side and magnetotail. The model is based on Mercury-like conditions, although the study results are extrapolated to exoplanets with stronger magnetic fields, providing the lower bound of the radio emission. The predicted dissipated powers and resulting radio emissions depends critically on the exoplanet magnetosphere topology and interplanetary magnetic field (IMF) orientation. The radio emission on the exoplanet's night and day sides should thus contain information on the exoplanet magnetic field topology. In addition, if the topology of an exoplanet magnetosphere is known, the radio emission measurements can be used as a proxy of the instantaneous dynamic pressure of the stellar wind, IMF orientation, and intensity.

astro-ph.EP↗

Parametric study and optimization trends for the Von-Kármán-Sodium dynamo experiment

We present magneto-hydrodynamic simulations of liquid sodium flow with the PLUTO compressible MHD code. We investigate the influence of the remnant magnetic field orientation and intensity, impinging velocity field due to Ekman pumping as well as the impeller dimensions on the magnetic field collimation by helical flows in between the impeller blades. For a simplified cartesian geometry we model the flow dynamics of a multi-blades impeller inspired by the Von-Karman-Sodium (VKS) experiment. The study shows that a remnant magnetic field oriented in the toroidal direction is the less efficient configuration to collimate the magnetic field, although if the radial or vertical components are not negligible the collimation is significantly improved. If the intensity of the remnant magnetic field increases the system magnetic energy is larger but the magnetic field collimation efficiency is the same, so the gain of magnetic energy is smaller as the remnant magnetic field intensity increases. The magnetic field collimation is modified if the impinging velocity field changes: the collimation is weaker if the impinging velocity increases from Gamma=0.8 to 0.9, slightly larger if the impinging velocity decreases from Gamma=0.8 to 0.7. The analysis of the impeller dimensions points out that the most efficient configuration to collimate the magnetic field requires a ratio between impeller blade height and base longitude between 0.375 - 0.5. The largest enhancement of the hypothetical alpha^2 dynamo loop, compared to the hypothetical Omega-alpha dynamo loop, is observed for the model that mimics TM 73 impeller configuration rotating in the unscooping direction with a remnant magnetic field of 10^-3 T orientated in the radial or vertical direction. The optimization trends obtained in the parametric analysis are also confirmed in simulations with higher resolution and turbulence degree.

physics.plasm-ph↗

Analysis of Alfven Eigenmode destabilization in DIII-D high poloidal $β$ discharges using a Landau closure model

Alfven Eigenmodes are destabilized at the DIII-D pedestal during transient beta drops in high poloidal beta discharges with internal transport barriers (ITBs), driven by n=1 external kink modes, leading to energetic particle losses. There are two different scenarios in the thermal beta recovery phase: with bifurcation (two instability branches with different frequencies) or without bifurcation (single instability branch). We use the reduced MHD equations in a full 3D system, coupled with equations of density and parallel velocity moments for the energetic particles as well as the geodesic acoustic wave dynamics, to study the properties of the instabilities observed in the DIII-D high poloidal beta discharges and identify the conditions to trigger the bifurcation. The simulations suggest that instabilities with lower frequency in the bifurcation case are ballooning modes driven at the plasma pedestal, while the instability branch with higher frequencies are low n (n<4) Toroidal Alfven Eigenmodes nearby the pedestal. The reverse shear region between the middle and plasma periphery in the non-bifurcated case avoids the excitation of ballooning modes at the pedestal, although Toroidal Alfven Eigenmodes and Reverse Shear Alfven Eigenmodes are unstable in the reverse shear region. The n=1 and n=2 Alfven Eigenmode activity can be suppressed or minimized if the neutral beam injector (NBI) intensity is lower than the experimental value (betaf < 0.03). In addition, if the beam energy or neutral beam injector voltage is lower than in the experiment (Vth,f / VA0 < 0.2), the resonance between beam and thermal plasma is weaker. The n=3,4,5 and 6 AE activity can't be fully suppressed, although the growth rate and frequency is smaller for an optimized neutral beam injector operation regime. In conclusion, AE activity in high poloidal beta discharges can be minimized for optimized NBI operation regimes.

physics.plasm-ph↗

The ALHAMBRA survey: tight dependence of the optical mass-to-light ratio on galaxy colour up to z = 1.5

Our goal is to characterise the dependence of the optical mass-to-light ratio on galaxy colour up to z = 1.5, expanding the redshift range explored in previous work. From the ALHAMBRA redshifts, stellar masses, and rest-frame luminosities provided by the MUFFIT code, we derive the mass-to-light ratio vs. colour relation (MLCR) both for quiescent and star-forming galaxies. The intrinsic relation and its physical dispersion are derived with a Bayesian inference model. The rest-frame i-band mass-to-light ratio of quiescent and star-forming galaxies presents a tight correlation with the rest-frame (g - i) colour up to z = 1.5. Such MLCR is linear for quiescent galaxies and quadratic for star-forming galaxies. The intrinsic dispersion in these relations is 0.02 dex for quiescent galaxies and 0.06 dex for star-forming ones. The derived MLCRs do not present a significant redshift evolution and are compatible with previous local results in the literature. Finally, these tight relations also hold for g- and r-band luminosities. The derived MLCRs in ALHAMBRA can be used to predict the mass-to-light ratio from a rest-frame optical colour up to z = 1.5. These tight correlations do not change with redshift, suggesting that galaxies have evolved along the derived relations during the last 9 Gyr.

astro-ph.GA↗

J-PLUS: measuring ${\rm H}α$ emission line fluxes in the nearby universe

In the present paper we aim to validate a methodology designed to extract the Halpha emission line flux from J-PLUS photometric data. J-PLUS is a multi narrow-band filter survey carried out with the 2 deg2 field of view T80Cam camera, mounted on the JAST/T80 telescope in the OAJ, Teruel, Spain. The information of the twelve J-PLUS bands, including the J0660 narrow-band filter located at rest-frame Halpha, is used over 42 deg2 to extract de-reddened and [NII] decontaminated Halpha emission line fluxes of 46 star-forming regions with previous SDSS and/or CALIFA spectroscopic information. The agreement of the inferred J-PLUS photometric Halpha fluxes and those obtained with spectroscopic data is remarkable, with a median comparison ratio R = 1.05 +- 0.25. This demonstrates that it is possible to retrieve reliable Halpha emission line fluxes from J-PLUS photometric data. With an expected area of thousands of square degrees upon completion, the J-PLUS dataset will allow the study of several star formation science cases in the nearby universe, as the spatially resolved star formation rate of nearby galaxies at z < 0.015, and how it is influenced by the environment, morphology or nuclear activity. As an illustrative example, the close pair of interacting galaxies NGC3994 and NGC3995 is analyzed, finding an enhancement of the star formation rate not only in the center, but also in outer parts of the disk of NGC3994.

astro-ph.GA↗

J-PLUS: On the identification of new cluster members in the double galaxy cluster A2589 & A2593 using PDFs

We aim to use multi-band imaging from the Phase-3 Verification Data of the J-PLUS survey to derive accurate photometric redshifts (photo-z) and look for potential new members in the surroundings of the nearby galaxy clusters A2589 (z=0.0414) & A2593 (z=0.0440), using redshift probability distribution functions. The ultimate goal is to demonstrate the usefulness of a 12-band filter system in the study of large-scale structure in the local universe. We present an optimized pipeline for the estimation of photo-z in clusters of galaxies. We tested our photo-z with a sample of 296 spectroscopically confirmed cluster members with a magnitude of = 16.6 and redshift =0.041. The combination of seven narrow and five broadband filters with a typical photometric-depth of r<21.5 provides dz/(1+z)=0.01 photo-z estimates. A precision of dz/(1+z)=0.005 is obtained for the 177 galaxies brighter than magnitude r<17. To foresee the precision beyond the spectroscopic sample, we designed a set of simulations in which real cluster galaxies are modeled and reinjected inside the images at different signal-to-noise. A precision of dz/(1+z)=0.02 and dz/(1+z)=0.03 is expected at = 18-22, respectively. Complementarily, we used SDSS/DR12 data to derive photo-z estimates for the same galaxy sample, demonstrating that the wavelength-resolution of the J-PLUS can double the precision achieved by SDSS for galaxies with a high S/N. We find as much as 170 new candidates across the entire field. The spatial distribution of these galaxies may suggest an overlap between the systems with no evidence of a clear filamentary structure connecting the clusters. These preliminary results show the potential of J-PLUS data to revisit membership of groups and clusters from nearby galaxies, important for the determination of luminosity and mass functions and environmental studies at the intermediate and low-mass regime.

astro-ph.CO↗

J-PLUS: 2-D analysis of the stellar population in NGC 5473 and NGC 5485

The spatial variations of stellar population properties within a galaxy are intimately related to their formation process. Therefore, spatially resolved studies of galaxies are essential to uncover their formation and assembly. The Javalambre Photometric Local Universe Survey (J-PLUS) is a dedicated multi-filter designed to observed ~8500 deg2 using twelve narrow-, intermediate- and broad-band filters in the optical range. In this study, we test the potential of the multi-filter observation carried out with J-PLUS to investigate the properties of spatially-resolved nearby galaxies. We present detailed 2D maps of stellar population properties (age, metallicity, extinction, and stellar mass surface density) for two early-type galaxies observed in both, J-PLUS and CALIFA surveys: NGC 5473 and NGC 5485. Radial structures are also compared and luminosity- and mass-weighted profiles are derived. We use MUFFIT to process the J-PLUS observations, and two different techniques (STARLIGHT and STECKMAP) to analyze IFU CALIFA data. We demonstrate that this novel technique delivers radial stellar population gradients in good agreement with the IFU technique CALIFA/STECKMAP although comparison of the absolute values reveals the existence of intrinsic systematic differences. Radial stellar population gradients differ when CALIFA/STARLIGHT methodology is used. Age and metallicity radial profiles derived from J-PLUS/MUFFIT are very similar when luminosity- or mass-weighted properties are used, suggesting that the contribution of a younger component is small. Comparison between the three methodologies reveals some discrepancies suggesting that the specific characteristics of each method causes important differences. We conclude that the ages, metallicities and extinction derived for individual galaxies not only depend on the chosen models but also depend on the method used.

astro-ph.GA↗

J-PLUS: Morphological star/galaxy classification by PDF analysis

Our goal is to morphologically classify the sources identified in the images of the J-PLUS early data release (EDR) into compact (stars) or extended (galaxies) using a suited Bayesian classifier. J-PLUS sources exhibit two distinct populations in the r-band magnitude vs. concentration plane, corresponding to compact and extended sources. We modelled the two-population distribution with a skewed Gaussian for compact objects and a log-normal function for the extended ones. The derived model and the number density prior based on J-PLUS EDR data were used to estimate the Bayesian probability of a source to be star or galaxy. This procedure was applied pointing-by-pointing to account for varying observing conditions and sky position. Finally, we combined the morphological information from g, r, and i broad bands in order to improve the classification of low signal-to-noise sources. The derived probabilities are used to compute the pointing-by-pointing number counts of stars and galaxies. The former increases as we approach to the Milky Way disk, and the latter are similar across the probed area. The comparison with SDSS in the common regions is satisfactory up to r ~ 21, with consistent numbers of stars and galaxies, and consistent distributions in concentration and (g - i) colour spaces. We implement a morphological star/galaxy classifier based on PDF analysis, providing meaningful probabilities for J-PLUS sources to one magnitude deeper (r ~ 21) than a classical boolean classification. These probabilities are suited for the statistical study of 150k stars and 101k galaxies with 15 < r < 21 present in the 31.7 deg2 of the J-PLUS EDR. In a future version of the classifier, we will include J-PLUS colour information from twelve photometric bands.

astro-ph.GA↗

J-PLUS: The Javalambre Photometric Local Universe Survey

J-PLUS is an ongoing 12-band photometric optical survey, observing thousands of square degrees of the Northern hemisphere from the dedicated JAST/T80 telescope at the Observatorio Astrofísico de Javalambre. T80Cam is a 2 sq.deg field-of-view camera mounted on this 83cm-diameter telescope, and is equipped with a unique system of filters spanning the entire optical range. This filter system is a combination of broad, medium and narrow-band filters, optimally designed to extract the rest-frame spectral features (the 3700-4000Å Balmer break region, H$δ$, Ca H+K, the G-band, the Mgb and Ca triplets) that are key to both characterize stellar types and to deliver a low-resolution photo-spectrum for each pixel of the sky observed. With a typical depth of AB $\sim 21.25$ mag per band, this filter set thus allows for an indiscriminate and accurate characterization of the stellar population in our Galaxy, it provides an unprecedented 2D photo-spectral information for all resolved galaxies in the local universe, as well as accurate photo-z estimates ($Δ\,z\sim 0.01-0.03$) for moderately bright (up to $r\sim 20$ mag) extragalactic sources. While some narrow band filters are designed for the study of particular emission features ([OII]/$λ$3727, H$α$/$λ$6563) up to $z < 0.015$, they also provide well-defined windows for the analysis of other emission lines at higher redshifts. As a result, J-PLUS has the potential to contribute to a wide range of fields in Astrophysics, both in the nearby universe (Milky Way, 2D IFU-like studies, stellar populations of nearby and moderate redshift galaxies, clusters of galaxies) and at high redshifts (ELGs at $z\approx 0.77, 2.2$ and $4.4$, QSOs, etc). With this paper, we release $\sim 36$ sq.deg of J-PLUS data, containing about $1.5\times 10^5$ stars and $10^5$ galaxies at $r<21$ mag.

astro-ph.GA↗

Online energy discrimination at DAQ front-end level on pixelated TOF-PET systems

Pixelated PET systems produce higher count rates as they integrate several detecting channels per detector module. An increased data flow from the detectors posses higher needs on the bandwidth requirements. We aim to optimize the bandwidth usage efficiency by filtering on the fly the detected events with non valid energies. PET systems with a SiPM-ASIC readout scheme are being extensively used to get enhanced images on Time-Of-Flight PET scanners. These kind of digital readout systems are specially interesting for the application of on-line processing techniques given the ease of access to each detected event digital information. This study purses the analysis of on-line processing techniques on the DAQ front-end level (on-detector electronics) for pixelated PET systems with SiPM-ASIC readout. In particular, we worked with a tunable on-line energy discriminating stage. For the optimization of its hardwired internal limits we analyzed the system energy space. We explored different solutions dependent or not on the system's energy calibration. Results obtained through the different filter versions confirm the minimal resources consumption of such processing techniques implemented at DAQ front-end level. Our experiences showed how the filtering process reduces the bandwidth needs excluding from the data stream all non valid energy events and thus improving the system sensitivity under saturation conditions. Additionally, these experiments highlight how setting proper energy limits we ensure the preservation of the system performance, which maintains its original energy and time resolution. Under the light of these findings, we see a great potential on the application of on-line processing techniques for Time-Of-Flight PET at the DAQ font-end level (on-detector electronics) and so we envisaged more complex processing methods.

physics.ins-det↗

High redshift galaxies in the ALHAMBRA survey: II. strengthening the evidence of bright-end excess in UV luminosity functions at 2.5 <= z <= 4.5 by PDF analysis

Context. Knowing the exact shape of the UV luminosity function of high-redshift galaxies is important in order to understand the star formation history of the early universe. However, the uncertainties, especially at the faint and bright ends of the LFs, are still significant. Aims. In this paper, we study the UV luminosity function of redshift z = 2.5 - 4.5 galaxies in 2.38 deg^2 of ALHAMBRA data with I <= 24. Thanks to the large area covered by ALHAMBRA, we particularly constrain the bright end of the luminosity function. We also calculate the cosmic variance and the corresponding bias values for our sample and derive their host dark matter halo masses. Methods. We use a novel methodology based on redshift and magnitude probability distribution functions (PDFs). This methodology robustly takes into account the uncertainties due to redshift and magnitude errors, shot noise and cosmic variance, and models the luminosity function in two dimensions (z; M_UV ). Results. We find an excess of bright ~ M*_UV galaxies as compared to the studies based on broad-band photometric data. However, our results agree well with the luminosity function of the magnitude-selected spectroscopic VVDS data. We measure high bias values, b ~ 8 - 10, that are compatible with the previous measurements considering the redshifts and magnitudes of our galaxies and further reinforce the real high-redshift nature of our bright galaxies. Conclusions. We call into question the shape of the luminosity function at its bright end; is it a double power-law as suggested by the recent broad-band photometric studies or rather a brighter Schechter function, as suggested by our multi-filter analysis and the spectroscopic VVDS data.

astro-ph.GA↗

Galaxy properties from J-PAS narrow-band photometry

We study the consistency of the physical properties of galaxies retrieved from SED-fitting as a function of spectral resolution and signal-to-noise ratio (SNR). Using a selection of physically motivated star formation histories, we set up a control sample of mock galaxy spectra representing observations of the local universe in high-resolution spectroscopy, and in 56 narrow-band and 5 broad-band photometry. We fit the SEDs at these spectral resolutions and compute their corresponding the stellar mass, the mass- and luminosity-weighted age and metallicity, and the dust extinction. We study the biases, correlations, and degeneracies affecting the retrieved parameters and explore the rôle of the spectral resolution and the SNR in regulating these degeneracies. We find that narrow-band photometry and spectroscopy yield similar trends in the physical properties derived, the former being considerably more precise. Using a galaxy sample from the SDSS, we compare more realistically the results obtained from high-resolution and narrow-band SEDs (synthesized from the same SDSS spectra) following the same spectral fitting procedures. We use results from the literature as a benchmark to our spectroscopic estimates and show that the prior PDFs, commonly adopted in parametric methods, may introduce biases not accounted for in a Bayesian framework. We conclude that narrow-band photometry yields the same trend in the age-metallicity relation in the literature, provided it is affected by the same biases as spectroscopy; albeit the precision achieved with the latter is generally twice as large as with the narrow-band, at SNR values typical of the different kinds of data.

astro-ph.GA↗

Effects of turbulence, resistivity and boundary conditions on helicoidal flow collimation: consequences for the Von-Kármán-Sodium dynamo experiment

We present hydrodynamic and magneto-hydrodynamic simulations of a liquid sodium flow using the compressible MHD code PLUTO to investigate the magnetic field regeneration in the Von-Karman-Sodium dynamo experiment. The aim of the study is to analyze the influence of the fluid resistivity and turbulence level on the collimation by helicoidal motions of a remnant magnetic field. We use a simplified cartesian geometry to represent the flow dynamics in the vicinity of one cavity of a multi-blades impeller inspired by those used in the Von-Karman-Sodium (VKS) experiment. We perform numerical simulations with kinetic Reynolds numbers up to 1000 for magnetic Prandtl numbers between 30 and 0.1. Our study shows that perfect ferromagnetic walls favour enhanced collimation of flow and magnetic fields even if the turbulence degree of the model increases. The location of the helicoidal coherent vortex in between the blades changes with the impinging velocity. It becomes closer to the upstream blade and impeller base if the flow incident angle is analogous to the TM73 impeller configuration rotating in the unscooping direction. This result is also obtained at higher kinetic Reynolds numbers when the helicoidal vortex undergoes a precessing motion, leading to a reinforced effect in the vortex evolution and in the magnetic field collimation when using again perfect ferromagnetic boundary conditions. We estimate the efficiency of a hypothetical dynamo loop occurring in the vicinity of the impeller and discuss the relevance of our findings in the context of mean field dynamo theory.

physics.plasm-ph↗

Analysis of Alfven Eigenmodes destabilization by energetic particles in TJ-II using a Landau-closure model

Alfven Eigenmodes (AE) can be destabilized by energetic particles in neutral beam injection (NBI) heated plasmas through inverse Landau damping and couplings with gap modes in the shear Alfven continua. We describe the linear evolution of the poloidal flux and the toroidal component of the vorticity in a full 3D system using the reduced MHD equations, density and parallel velocity moments for the energetic particles as well as the geodesic acoustic wave dynamics. A closure relation adds the Landau damping and resonant destabilization effects in the model. We apply the model to study the Alfven modes stability in TJ-II, performing a parametric analysis in a range of realistic values of energetic particle $β$ (beta_f), ratios of thermal/Alfven velocities (Vth/VA0), energetic particle density profiles and toroidal modes (n) including toroidal and helical couplings. The study predicts a large helical coupling between different toroidal modes and the destabilization of helical Alfven Eigenmodes (HAE) with frequencies similar to the AE activity measured in TJ-II, between 50 - 400 kHz. The analysis has also revealed the destabilization of GAE (Global Alfven Eigenmodes), TAE (Toroidal Alfven Eigenmodes) and EPM (Energetic Particle Modes). For the modes considered here, optimized TJ-II operations require a iota profile in the range of [0.845, 0.979] to stabilize AEs in the inner and middle plasma. AEs in the plasma periphery cannot be fully stabilized, although for a configuration with iota = [0.945, 1.079], only n=7,11,15 AE are unstable with a growth rate 4 times smaller compared to the standard iota = [1.54,1.68] case and a frequency of 100 kHz. We reproduce the frequency sweeping evolution of the AE frequency observed in TJ-II as the iota profile is varied. The AE frequency sweeping is caused by consecutive changes of the instability dominant modes between different helical families.

physics.plasm-ph↗

The ALHAMBRA survey: 2-D analysis of the stellar populations in massive early-type galaxies at z < 0.3

We present a technique that permits the analysis of stellar population gradients in a relatively low cost way compared to IFU surveys analyzing a vastly larger samples as well as out to larger radii. We developed a technique to analyze unresolved stellar populations of spatially resolved galaxies based on photometric multi-filter surveys. We derived spatially resolved stellar population properties and radial gradients by applying a Centroidal Voronoi Tesselation and performing a multi-color photometry SED fitting. This technique has been applied to a sample of 29 massive (M$_{\star}$ > 10$^{10.5}$ M$_{\odot}$), early-type galaxies at $z$ < 0.3 from the ALHAMBRA survey. We produced detailed 2D maps of stellar population properties (age, metallicity and extinction). Radial structures have been studied and luminosity-weighted and mass-weighted gradients have been derived out to 2 - 3.5 R$_\mathrm{eff}$. We find the gradients of early-type galaxies to be on average flat in age ($\nabla$log Age$_\mathrm{L}$ = 0.02 $\pm$ 0.06 dex/R$_\mathrm{eff})$ and negative in metallicity ($\nabla$[Fe/H]$_\mathrm{L}$ = - 0.09 $\pm$ 0.06 dex/R$_\mathrm{eff}$). Overall, the extinction gradients are flat ($\nabla$A$_\mathrm{v}$ = - 0.03 $\pm$ 0.09 mag/R$_\mathrm{eff}$ ) with a wide spread. These results are in agreement with previous studies that used standard long-slit spectroscopy as well as with the most recent integral field unit (IFU) studies. According to recent simulations, these results are consistent with a scenario where early-type galaxies were formed through major mergers and where their final gradients are driven by the older ages and higher metallicity of the accreted systems. We demonstrate the scientific potential of multi-filter photometry to explore the spatially resolved stellar populations of local galaxies and confirm previous spectroscopic trends from a complementary technique.

astro-ph.GA↗

A custom readout electronics for the BESIII CGEM detector

For the upgrade of the inner tracker of the BESIII spectrometer, planned for 2018, a lightweight tracker based on an innovative Cylindrical Gas Electron Multiplier (CGEM) detector is now under development. The analogue readout of the CGEM enables the use of a charge centroid algorithm to improve the spatial resolution to better than 130 um while loosening the pitch strip to 650 um, which allows to reduce the total number of channels to about 10 000. The channels are readout by 160 dedicated integrated 64-channel front-end ASICs, providing a time and charge measurement and featuring a fully-digital output. The energy measurement is extracted either from the time-over-threshold (ToT) or the 10-bit digitisation of the peak amplitude of the signal. The time of the event is generated by quad-buffered low-power TDCs, allowing for rates in excess of 60 kHz per channel. The TDCs are based on analogue interpolation techniques and produce a time stamp (or two, if working in ToT mode) of the event with a time resolution better than 50 ps. The front-end noise, based on a CSA and CR-RC2 shapers, dominate the channel intrinsic time jitter, which is less than 5 ns r.m.s.. The time information of the hit can be used to reconstruct the track path, operating the detector as a small TPC and hence improving the position resolution when the distribution of the cloud, due to large incident angle or magnetic field, is very broad. Event data is collected by an off-detector motherboard, where each GEM-ROC readout card handles 4 ASIC carrier PCBs (512 channels). Configuration upload and data readout between the off-detector electronics and the VME-based data collector cards are managed by bi-directional fibre optical links.

physics.ins-det↗

Internal disruptions and sawtooth like activity in LHD

LHD inward-shifted configurations are unstable to resistive MHD pressure-gradient-driven modes. These modes drive sawtooth like events during LHD operation. In this work, we simulate sawtooth like activity and internal disruptions in order to improve the understanding of these relaxation events and their effect over the device efficiency to confine the plasma, with the aim to improve the LHD present and future operation scenarios minimizing or avoiding the disadvantageous MHD soft and hard limits. By solving a set of reduced non-linear resistive MHD equations, we have studied the evolution of perturbations to equilibria obtained before and after a sawtooth like event in LHD. The equilibrium $β$ value is gradually increased during the simulation until it reaches the experimental value. Sawtooth like events and internal disruption events take place in the simulation for $β_{0}$ values between $1\%$ and $1.48\%$. The main driver of the sawtooth like events is the resonant and non-resonant effect of the $(n=1, m=3)$ mode. The instability is stronger for resonant events, and they only appear when $β_{0} = 1.48 \%$. Internal disruptions are mainly driven by the $(n=1, m=2)$ mode, and they extend throughout the whole plasma core. Internal disruption events do not show up when resonant sawtooth like events are triggered.

physics.plasm-ph↗

Hard MHD limit in $1/3$ sawtooth like activity in LHD

The optimization of LHD discharges in inward-shifted configurations with $1/3$ sawtooth like activity is an open issue. These relaxation events limit the LHD performance driving a periodic plasma deconfinement. The aim of this study is to analyze the $1/3$ sawtooth like activity in plasmas with different stability properties to foreseen the best operation conditions and minimize its undesired effects. We summarize the results of several MHD simulations for plasmas with Lundquist numbers between $10^5$ and $10^6$ in the slow reconnection regime, studying the equilibria properties during the onset of a chain of $1/3$ sawtooth like events. The research conclusions point out that the hard MHD limit can be reached in the inner plasma region after the onset of a strong $1/3$ resonant sawtooth like event and trigger a plasma collapse. The collapse can be avoided if the system remains in the soft MHD limit, namely in a regime with a pressure gradient and a magnetic turbulence below the critical values to drive the soft-hard MHD transition. In the soft MHD limit the system relaxations are the non resonant $1/3$ sawtooth like events or a weak version of the $1/3$ resonant sawtooth like events. A system relaxation in the soft MHD regime drives a minor plasma deconfinement that doesn't limit the LHD performance if the event periodicity is not very high.

physics.plasm-ph↗