arXiv subjects

J. W. Wang

Publications and source records attributed to J. W. Wang.

18 recordsLinked to original sources

arXiv2024

Tracing Rayleigh-Taylor instability from measured periodic modulation in laser driven proton beams

Rayleigh-Taylor (RT) instability occurs in a variety of scenario as a consequence of fluids of different densities pushing against the density gradient. For example, it is expected to occur in the ion acceleration of solid density targets driven by high intensity lasers and is crucial for the acceleration process. Yet, it is essential to understand the dynamics of the RT instability, a typical way to measure this phenomenon requires sophisticated diagnostics such as streak X ray radiography. Here, we report on experimental observation on periodic modulation in the energy spectrum of laser accelerated proton beams. Interestingly, theoretical model and two-dimensional particle-in-cell simulations, in good agreement with the experimental finding, indicated that such modulation is associated with periodic modulated electron density induced by transverse Rayleigh-Taylor-like instability. Furthermore, the correlation between the RT instability and the ion acceleration provides an interpretation to trace the development of the RT instability from the modulated proton spectrum. Our results thus suggest a possible tool to diagnose the evolution of the RT instability, and may have implications for further understanding for the accelerating mechanisms as well as optimization strategies for laser driven ion acceleration.

physics.plasm-ph↗

arXiv2019

Triple Range Imager and POLarimeter (TRIPOL) --- A Compact and Economical Optical Imaging Polarimeter for Small Telescopes

We report the design concept and performance of a compact, light-weight, and economic imaging polarimeter, TRIPOL (the Triple Range Imager and POLarimeter), capable of simultaneous optical imagery and polarimetry. TRIPOL splits the beam from wavelength 400 to 830 nm into g'-, r'-, and i'-bands with two dichroic mirrors, and measures polarization with an achromatic half-waveplate and a wire-grid. The simultaneity makes TRIPOL a useful tool for small telescopes for photometry and polarimetry of time variable and wavelength dependent phenomena. TRIPOL is devised for a Cassegrain telescope of an aperture of ~1 m. This paper presents the engineering considerations of TRIPOL and compares the expected with the observed performance. Using the Lulin 1-m telescope and 100 seconds integration, the limiting magnitudes are g' ~ 19.0 mag, r' ~ 18.5 mag and i' ~ 18.0 mag with a signal-to-noise of 10, in agreement with design expectation. The instrumental polarization is measured to be ~ 0.3% at three bands. Two applications, one to the star-forming cloud IC 5146, and the other to the young variable GM Cep, are presented as demonstration.

astro-ph.IM↗

arXiv2017

Magetostatic amplifier with tunable maximum by twisted-light plasma interactions

Laser beams with Laguerre-Gaussian (LG) mode carry orbital angular momentum (OAM), however when interacting with plasmas, the net OAM acquired by plasmas is basically zero after interaction. Here, we find when there exist a small magetostatic seed along laser propagation direction, the barrier would be broken, giving rise to dramatic OAM transfer from LG lasers to plasmas. Hence, the net OAM remained in plasmas system would continuously enhance the magetostatic field, until the corresponding Larmor frequency of electrons is comparable to the laser frequency in vacuum. Three-dimensional particle-in-cell (3D-PIC) simulations are performed to confirm our theory, producing space-uniform, time-stable and extremely intense magetostatic fields.

physics.plasm-ph↗

arXiv2003

Energy dispersion compensation and beam loading in X-band linacs for the JLC/NLC

The shape of an RF pulse is distorted upon propagating through an X-band accelerator structure due to dispersive effects. This distortion together with beam loading introduce energy spread between 192 bunches. In order to minimize this energy spread we modify the input RF pulse shape. The pulse propagation, energy gain, and beam loading are modelled with a mode-matching computer code and a circuit model. A 2D model and a circuit model of a complete 60 cm structure, consisting of 55 cells and input and output couplers is analyzed. This structure operates with a 5pi/6 phase advance per cell. Dispersive effects for this structure are more significant than for previously studied 2pi/3 phase advance accelerating structures. Experimental results are compared with the theoretical model and excellent agreement is obtained for the propagation of an RF pulse through the structure.

physics.acc-ph↗

arXiv2002

Impedance Measurement Setup for Higher-Order Mode Studies in NLC Accelerator Structures with the Wire Method

Dipole modes are the main cause of transverse emittance dilution in the Japanese Linear Collider / Next Linear Collider (JLC/NLC). A diagnostic setup has been built in order to investigate them. The method is based on using a coaxial wire to excite and measure electromagnetic modes of accelerating structures. This method can offer a more efficient and less expensive procedure than the ASSET facility. Initial measurements have been made and are presented in this paper.

physics.acc-ph↗

arXiv2002

Manifold Damping Of Wakefields In High Phase Advance Linacs For The NLC

Earlier RDDS (Rounded Damped Detuned Structures) [1,2], designed, fabricated and tested at SLAC, in collaboration with KEK, have been shown to damp wakefields successfully. However, electrical breakdown has been found to occur in these structures and this makes them inoperable at the desired gradient. Recent results [3] indicate that lowering the group velocity of the accelerating mode reduces electrical breakdown events. In order to preserve the filling time of each structure a high synchronous phase advance (150 degrees as opposed to 120 used in previous NLC designs) has been chosen. Here, damping of the wakefield is analyzed. Manifold damping and interleaving of structure cell frequencies is discussed. These wakefields impose alignment tolerances on the cells and on the structure as a whole. Tolerance calculations are performed and these are compared with analytic estimations.

physics.acc-ph↗

arXiv2002

Tuning And Field Sensitivity Of Pi-Mode Standing Wave Linacs For The NLC

In order to mitigate the effects of electrical breakdown (which have been found to occur in SLAC X-band traveling wave structures) standing wave structures are being considered for the NLC linac. At SLAC, structures consisting of 15 cells operating in the p accelerating mode are being tested for their electrical breakdown characteristics. In this paper the tuning requirement on the cavities is elucidated by utilizing a circuit model of the structure. The sensitivity of the field to both random and systematic errors is also discussed.

physics.acc-ph↗

arXiv2002

Coaxial Wire Measurements In NLC Accelerating Structures

The coaxial wire method provides an experimental way of measuring wake fields without the need for a particle beam. A special setup has been designed and is in the process of being fabricated at SLAC to measure the loss factors and synchronous frequencies of dipole modes in both traveling and standing wave structures for the Next Linear Collider (NLC). The method is described and predictions based on electromagnetic field simulations are discussed

physics.acc-ph↗

arXiv2001

Room temperature accelerator structures for linear colliders

Early tests of short low group velocity and standing wave structures indicated the viability of operating X-band linacs with accelerating gradients in excess of 100 MeV/m. Conventional scaling of traveling wave traveling wave linacs with frequency scales the cell dimensions with l. Because Q scales as l1/2, the length of the structures scale not linearly but as l3/2 in order to preserve the attenuation through each structure. For NLC we chose not to follow this scaling from the SLAC S-band linac to its fourth harmonic at X-band. We wanted to increase the length of the structures to reduce the number of couplers and waveguide drives which can be a significant part of the cost of a microwave linac. Furthermore, scaling the iris size of the disk-loaded structures gave unacceptably high short range dipole wakefields. Consequently, we chose to go up a factor of about 5 in average group velocity and length of the structures, which increases the power fed to each structure by the same factor and decreases the short range dipole wakes by a similar factor. Unfortunately, these longer (1.8 m) structures have not performed nearly as well in high gradient tests as the short structures. We believe we have at least a partial understanding of the reason and will discuss it below. We are now studying two types of short structures with large apertures with moderately good efficiency including: 1) traveling wave structures with the group velocity lowered by going to large phase advance per period with bulges on the iris, 2) pi mode standing wave structures

physics.acc-ph↗

arXiv2001

Processing Studies of X-Band Accelerator Structures at the NLCTA

RF processing studies of 1.8-m X-band (11.4 GHz) traveling wave structures at the Next Linear Collider Test Accelerator (NLCTA) have revealed breakdown-related damage at gradients lower than expected from earlier tests with standing wave and shorter, lower group velocity traveling wave structures. To understand this difference, a series of structures with different group velocities and lengths are being processed. In parallel, efforts are being made to improve processing procedures and to reduce structure contaminants and absorbed gases. This paper presents results from these studies.

physics.acc-ph↗

arXiv2001

Dipole Wakefield Suppression In High Phase Advance Detuned Linear Accelerators For The JLC/NLC Designed To Minimise Electrical Breakdown And Cumulative BBU

Recent experiments at SLAC [1,2] and CERN [3] have revealed evidence of significant deformation in the form of "pitting" of the cells of the 1.8m series of structures DDS/RDDS (Damped Detuned Structure/Rounded Damped Detuned Structure). This pitting occurs in the high group velocity (vg /c = 0.012) end of the accelerating structure and little evidence of breakdown has been found in the lower group velocity end of the structure. Additional, albeit preliminary experimental evidence, suggests that shorter and lower group velocity structures have reduced breakdown events with increasing accelerating field strengths. Two designs are presented here, firstly a 90cm structure consisting of 83 cells with an initial vg/c = 0.0506 (known as H90VG5) and secondly, an even shorter structure of length 60cm consisting of 55 cells with an initial vg /c = 0.03 (known as H60VG3). The feasibility of using these structures to accelerate a charged beam over 10km is investigated. The particular issue focussed upon is suppression of the dipole wakefields via detuning of the cell frequencies and by locally damping individual cells in order to avoid BBU (Beam Break Up). Results are presented on beam-induced dipole wakefields and on the beam dynamics encountered on tracking the progress of the beam through several thousand accelerating structures. [1] C. Adolphsen, ROAA003, this conf. [2] R.H. Miller et al, FPAH062, this conf. [3] L. Groening et al, MPPH039, this conf

physics.acc-ph↗

arXiv2000

Design of the JLC/NLC RDDS Structure Using Parallel Eigensolver Omega3p

The complexity of the Round Damped Detuned Structue (RDDS) for the JLC/NLC main linac is driven by the considerations of rf efficiency and dipole wakefield suppression. As a time and cost saving measure for the JLC/NLC, the dimensions of the 3D RDDS cell are being determined through computer modeling to within fabrication precision so that no tuning may be needed once the structures are assembled. The tolerances on the frequency errors for the RDDS structure are about one MHz for the fundamental mode and a few MHz for the dipole modes. At the X-band frequency, these correspond to errors of a micron level on the major cell dimensions. Such a level of resolution requires highly accurate field solvers and vast amount of computer resources. A parallel finite-element eigensolver Omega3P was developed at SLAC that runs on massively parallel computers such as the Cray T3E at NERSC. The code was applied in the design of the RDDS cell dimensions that are accurate to within fabrication precision. We will present the numerical approach of using these codes to determine the RDDS dimensions and compare the numerical predictions with the cold test measurements on RDDS prototypes that are diamond-turned using these dimensions.

physics.acc-ph↗

arXiv2000

Design, fabrication and measurement of the first rounded damped detuned accelerator structure (RDDS1)

As a joint effort in the JLC/NLC research program, we have developed a new type of damped detuned accelerator structure with optimized round-shaped cavities (RDDS). This paper discusses some important R&D aspects of the first structure in this series (RDDS1). The design aspects covered are the cell design with sub-MHz precision, HOM detuning, coupling and damping technique and wakefield simulation. The fabrication issues covered are ultra-precision cell machining with micron accuracy, assembly and diffusion bonding technologies to satisfactorily meet bookshelf, straightness and cell rotational alignment requirements. The measurements described are the RF properties of single cavities and complete accelerator section, as well as wakefields from the ASSET tests at SLAC. Finally, future improvements are also discussed.

physics.acc-ph↗

arXiv2000

Local and Fundamental Mode Coupler Damping of the Transverse Wakefield in RDDS1 Linacs

In damping the wakefield generated by an electron beam traversing several thousand X-band linacs in the NLC we utilise a Gaussian frequency distribution of dipole modes to force the modes to deconstructively interfere, supplemented with moderate damping achieved by coupling these modes to four attached manifolds. Most of these modes are adequately damped by the manifolds. However, the modes towards the high frequency end of the lower dipole band are not adequately damped because the last few cells are, due to mechanical fabrication requirements, not coupled to the manifolds. To mitigate this problem in the present RDDS1 design, the output coupler for the accelerating mode has been designed so as to also couple out those dipole modes which reach the output coupler cell. In order to couple out both dipole mode polarizations, the output coupler has four ports. We also report on the results of a study of the benefits which can be achieved by supplementing manifold damping with local damping for a limited number of cells at the downstream end of the structure.

physics.acc-ph↗

arXiv2000

RF Processing of X-band Accelerator Structures at the NLCTA

During the initial phase of operation, the linacs of the Next Linear Collider (NLC) will contain roughly 5000 X-Band accelerator structures that will accelerate beams of electrons and positrons to 250 GeV. These structures will nominally operate at an unloaded gradient of 72 MV/m. As part of the NLC R&D program, several prototype structures have been built and operated at the Next Linear Collider Test Accelerator (NLCTA) at SLAC. Here, the effect of high gradient operation on the structure performance has been studied. Significant progress was made during the past year after the NLCTA power sources were upgraded to reliably produce the required NLC power levels and beyond. This paper describes the structures, the processing methodology and the observed effects of high gradient operation.

physics.acc-ph↗

arXiv2000

Comparisons Of Equivalent Circuit Predictions With Measurements For Short Stacks Of Rdds1 Discs, And Their Potential Application To Improved Wakefield Prediction

In fabricating the first X-Band RDDS (Rounded Damped Detuned Structure) accelerator structure, microwave measurements are made on short groups of discs prior to bonding the discs of the entire structure. The design dispersion curves are compared with the frequency measurements. The theory utilised is based on a circuit model adapted to a short stack of slowly varying non-uniform discs. The model reveals the nature of the modes in the structure and may also be used to refit the experimental data to the parameters in a model of the wakefield given earlier [1]. This method allows a more faithful determination of the wakefield that a beam will experience as it traverses the structure. Results obtained on the frequencies are compared to the original design. [1] R.M.Jones, et al, EPAC96 (also SLAC-PUB-7187)

physics.acc-ph↗

arXiv2000

Meeting Tight Frequency Requirement of Rounded Damped Detuned Structure

Following successful design and fabrication of damped detuned structures, the R&D for the accelerating structures of the NLC/JLC linear collider project proceeded to studies of Rounded Damped Detuned Structure with curved cross section of the cavity shape for increased shunt impedance. The important features of the structure are the accurately tuned accelerating mode frequency and the distribution of the first dipole modes smooth and close to the design distribution. These requirements were met based on the high-accuracy diamond turning with its capability to realize the periphery tolerance of two microns. The lowest dipole mode frequencies scattered by 0.6 MHz RMS. The error in the accelerating mode frequency averaged over a structure was 0.1 MHz by applying a feed-forward method.

hep-ex↗

arXiv2000

Report of the Beyond the MSSM Subgroup for the Tevatron Run II SUSY/Higgs Workshop

There are many low-energy models of supersymmetry breaking parameters which are motivated by theoretical and experimental considerations. Here, we discuss some of the lesser-known theories of low-energy supersymmetry, and outline their phenomenological consequences. In some cases, these theories have more gauge symmetry or particle content than the Minimal Supersymmetric Standard Model. In other cases, the parameters of the Lagrangian are unusual compared to commonly accepted norms (e.g., Wino LSP, heavy gluino LSP, light gluino, etc.). The phenomenology of supersymmetry varies greatly between the different models. Correspondingly, particular aspects of the detectors assume greater or lesser importance. Detection of supersymmetry and the determination of all parameters may well depend upon having the widest possible view of supersymmetry phenomenology.

hep-ph↗