arXiv subjects

J. Wabnig

Publications and source records attributed to J. Wabnig.

11 recordsLinked to original sources

arXiv2013

Reference frame independent quantum key distribution server with telecom tether for on-chip client

We demonstrate a client-server quantum key distribution (QKD) scheme, with large resources such as laser and detectors situated at the server-side, which is accessible via telecom-fibre, to a client requiring only an on-chip polarisation rotator, that may be integrated into a handheld device. The detrimental effects of unstable fibre birefringence are overcome by employing the reference frame independent QKD protocol for polarisation qubits in polarisation maintaining fibre, where standard QKD protocols fail, as we show for comparison. This opens the way for quantum enhanced secure communications between companies and members of the general public equipped with handheld mobile devices, via telecom-fibre tethering.

quant-ph↗

arXiv2013

Calibration and High Fidelity Measurement of a Quantum Photonic Chip

Integrated quantum photonic circuits are becoming increasingly complex. Accurate calibration of device parameters and detailed characterization of the prepared quantum states are critically important for future progress. Here we report on an effective experimental calibration method based on Bayesian updating and Markov chain Monte Carlo integration. We use this calibration technique to characterize a two qubit chip and extract the reflectivities of its directional couplers. An average quantum state tomography fidelity of 93.79+/-1.05% against the four Bell states is achieved. Furthermore, comparing the measured density matrices against a model using the non-ideal device parameters derived from the calibration we achieve an average fidelity of 97.57+/-0.96%. This pinpoints non-ideality of chip parameters as a major factor in the decrease of Bell state fidelity. We also perform quantum state tomography for Bell states while continuously varying photon distinguishability and find excellent agreement with theory.

quant-ph↗

arXiv2013

Demonstration of Free-space Reference Frame Independent Quantum Key Distribution

Quantum key distribution (QKD) is moving from research laboratories towards applications. As computing becomes more mobile, cashless as well as cardless payment solutions are introduced, and a need arises for incorporating QKD in a mobile device. Handheld devices present a particular challenge as the orientation and the phase of a qubit will depend on device motion. This problem is addressed by the reference frame independent (RFI) QKD scheme. The scheme tolerates an unknown phase between logical states that varies slowly compared to the rate of particle repetition. Here we experimentally demonstrate the feasibility of RFI QKD over a free-space link in a prepare and measure scheme using polarisation encoding. We extend the security analysis of the RFI QKD scheme to be able to deal with uncalibrated devices and a finite number of measurements. Together these advances are an important step towards mass production of handheld QKD devices.

quant-ph↗

arXiv2011

Measuring the complex admittance of a carbon nanotube double quantum dot

We investigate radio-frequency (rf) reflectometry in a tunable carbon nanotube double quantum dot coupled to a resonant circuit. By measuring the in-phase and quadrature components of the reflected rf signal, we are able to determine the complex admittance of the double quantum dot as a function of the energies of the single-electron states. The measurements are found to be in good agreement with a theoretical model of the device in the incoherent limit. Besides being of fundamental interest, our results present an important step forward towards non-invasive charge and spin state readout in carbon nanotube quantum dots.

cond-mat.mes-hall↗

arXiv2010

Single Spin Detection with a Carbon Nanotube Double Quantum Dot

Spin qubits defined in carbon nanotube quantum dots are of considerable interest for encoding and manipulating quantum information because of the long electron spin coherence times expected. However, before carbon nanotubes can find applications in quantum information processing schemes, we need to understand and control the coupling between individual electron spins and the interaction between the electron spins and their environment. Here we make use of spin selection rules to directly measure - and demonstrate control of - the singlet-triplet exchange coupling between two carbon nanotube quantum dots. We furthermore elucidate the effects of spin-orbit interaction on the electron transitions and investigate the interaction of the quantum dot system with a single impurity spin - the ultimate limit in spin sensitivity.

cond-mat.mes-hall↗

arXiv2010

Spin detection at elevated temperatures using a driven double quantum dot

We consider a double quantum dot in the Pauli blockade regime interacting with a nearby single spin. We show that under microwave irradiation the average electron occupations of the dots exhibit resonances that are sensitive to the state of the nearby spin. The system thus acts as a spin meter for the nearby spin. We investigate the conditions for a non-demolition read-out of the spin and find that the meter works at temperatures comparable to the dot charging energy and sensitivity is mainly limited by the intradot spin relaxation.

cond-mat.mes-hall↗

arXiv2008

A Non-Demolition Single Spin Meter

We present the theory of a single spin meter consisting of a quantum dot in a magnetic field under microwave irradiation combined with a charge counter. We show that when a current is passed through the dot, a change in the average occupation number occurs if the microwaves are resonant with the on-dot Zeeman splitting. The width of the resonant change is given by the microwave induced Rabi frequency, making the quantum dot a sensitive probe of the local magnetic field and enabling the detection of the state of a nearby spin. If the dot-spin and the nearby spin have different g-factors a non-demolition readout of the spin state can be achieved. The conditions for a reliable spin readout are found.

cond-mat.mes-hall↗

arXiv2008

Spin Lifetimes in Quantum Dots from Noise Measurements

We present a method of obtaining information about spin lifetimes in quantum dots from measurements of electrical transport. The dot is under resonant microwave irradiation and at temperatures comparable to or larger than the Zeeman energy. We find that the ratio of the spin coherence times T_{1}/T_{2} can be deduced from a measurement of current through the quantum dot as a function the applied magnetic field. We calculate the noise power spectrum of the dot current and show that a dip occurs at the Rabi frequency with a line width given by 1/T_{1}+1/T_{2}.

cond-mat.mes-hall↗

arXiv2007

Noise spectrum of a tunnel junction coupled to a nanomechanical oscillator

A nanomechanical resonator coupled to a tunnel junction is studied. The oscillator modulates the transmission of the junction, changing the current and the noise spectrum. The influence of the oscillator on the noise spectrum of the junction is investigated, and the noise spectrum is obtained for arbitrary frequencies, temperatures and bias voltages. We find that the noise spectrum consists of a noise floor and a peaked structure with peaks at zero frequency, the oscillator frequency and twice the oscillator frequency. The influence of the oscillator vanishes if the bias voltage of the junction is lower than the oscillator frequency. We demonstrate that the peak at the oscillator frequency can be used to determine the oscillator occupation number, showing that the current noise in the junction functions as a thermometer for the oscillator.

cond-mat.mes-hall↗

arXiv2005

Statistics of charge transfer in a tunnel junction coupled to an oscillator

The charge transfer statistics of a tunnel junction coupled to a quantum object is studied using the charge projection technique. The joint dynamics of the quantum object and the number of charges transferred through the junction is described by the charge specific density matrix. The method allows evaluating the joint probability distribution of the state of the quantum object and the charge state of the junction.The statistical properties of the junction current are derived from the charge transfer statistics using the master equation for the charge specific density matrix. The theory is applied to a nanoelectromechanical system, and the influence on the average current and the current noise of the junction is obtained for coupling to a harmonic oscillator.

cond-mat.mes-hall↗

arXiv2004

Quantum measurement in the charge representation

Counting statistics of charge transfers in a point contact interacting with an arbitrary quantum system is studied. The theory for the charge specific density matrix is developed, allowing the evaluation of the probability of the outcome of any joint measurement of the state of the quantum system and the transferred charge. Applying the method of charge projectors, the master equation for the charge specific density matrix is derived in the tunneling Hamiltonian model of the point contact. As an example, the theory is applied to a quantum measurement of a two-state system: The evolution of the charge specific density matrix in the presence of Nyquist or Schottky noise is studied and the conditions for the realization of a projective measurement are established.

cond-mat.mes-hall↗