SearcharxivSearch

arXiv subjects

J. Warner

Publications and source records attributed to J. Warner.

8 recordsLinked to original sources

Interferometric sensing of a commercial geophone

We present a modified commercial L-4C geophone with interferometric readout that demonstrated a resolution 60 times lower than the included coil-magnet readout at low frequencies. The intended application for the modified sensor is in vibration isolation platforms that require improved performance at frequencies lower than 1 Hz. A controls and noise-model of an Advanced LIGO 'HAM-ISI' vibration isolation system was developed, and it shows that our sensor can reduce the residual vibration by a factor of 70 at 0.1 Hz

physics.ins-det

Using context to adapt to sensor drift

Lifelong development allows animals and machines to adapt to changes in the environment as well as in their own systems, such as wear and tear in sensors and actuators. An important use case of such adaptation is industrial odor-sensing. Metal-oxide-based sensors can be used to detect gaseous compounds in the air; however, the gases interact with the sensors, causing their responses to change over time in a process called sensor drift. Sensor drift is irreversible and requires frequent recalibration with additional data. This paper demonstrates that an adaptive system that represents the drift as context for the skill of odor sensing achieves the same goal automatically. After it is trained on the history of changes, a neural network predicts future contexts, allowing the context+skill sensing system to adapt to sensor drift. Evaluated on an industrial dataset of gas-sensor drift, the approach performed better than standard drift-naive and ensembling methods. In this way, the context+skill system emulates the natural ability of animal olfaction systems to adapt to a changing world, and demonstrates how it can be effective in real-world applications.

physics.ins-det

Low Frequency Tilt Seismology with a Precision Ground Rotation Sensor

We describe measurements of the rotational component of teleseismic surface waves using an inertial high-precision ground-rotation-sensor installed at the LIGO Hanford Observatory (LHO). The sensor has a noise floor of 0.4 nrad$/ \sqrt{\rm Hz}$ at 50 mHz and a translational coupling of less than 1 $μ$rad/m enabling translation-free measurement of small rotations. We present observations of the rotational motion from Rayleigh waves of six teleseismic events from varied locations and with magnitudes ranging from M6.7 to M7.9. These events were used to estimate phase dispersion curves which shows agreement with a similar analysis done with an array of three STS-2 seismometers also located at LHO.

physics.geo-ph

Control strategy to limit duty cycle impact of earthquakes on the LIGO gravitational-wave detectors

Advanced gravitational-wave detectors such as the Laser Interferometer Gravitational-Wave Observatories (LIGO) require an unprecedented level of isolation from the ground. When in operation, they are expected to observe changes in the space-time continuum of less than one thousandth of the diameter of a proton. Strong teleseismic events like earthquakes disrupt the proper functioning of the detectors, and result in a loss of data until the detectors can be returned to their operating states. An earthquake early-warning system, as well as a prediction model have been developed to help understand the impact of earthquakes on LIGO. This paper describes a control strategy to use this early-warning system to reduce the LIGO downtime by 30%. It also presents a plan to implement this new earthquake configuration in the LIGO automation system.

physics.ins-det

Seismic isolation of Advanced LIGO: Review of strategy, instrumentation and performance

Isolating ground-based interferometric gravitational wave observatories from environmental disturbances is one of the great challenges of the advanced detector era. In order to directly observe gravitational waves, the detector components and test masses must be highly inertially decoupled from the ground motion not only to sense the faint strain of space-time induced by gravitational waves, but also to maintain the resonance of the very sensitive 4 km interferometers. This article presents the seismic isolation instrumentation and strategy developed for Advanced LIGO interferometers. It reviews over a decade of research on active isolation in the context of gravitational wave detection, and presents the performance recently achieved with the Advanced LIGO observatory. Lastly, it discusses prospects for future developments in active seismic isolation and the anticipated benefits to astrophysical gravitational wave searches. Beyond gravitational wave research, the goal of this article is to provide detailed isolation strategy guidelines for sensitive ground-based physics experiments that may benefit from similar levels of inertial isolation.

physics.ins-det

Droplet beams for serial crystallography of proteins

Serial diffraction of proteins requires an injection method to deliver protein molecules - preferably uncharged, fully hydrated, spatially oriented, and with high flux - into the crossed beams of an alignment laser and a focused probe beam of electrons or X-rays of typically only a few tens of microns diameter. The aim of this work has been to examine several potential droplet sources as to their suitability for this task. We compare Rayleigh droplet sources, electrospray sources, nebulizers and aerojet-focused droplet sources using time-resolved optical images of the droplet beams. Shrinkage of droplets by evaporation as a means of removing most of the water surrounding the proteins is discussed. Experimental measurements of droplet size, conformation of proteins after passing through a Rayleigh jet, and triboelectric charging are presented and conclusions are drawn about the source configuration for serial diffraction. First experimental X-ray diffraction patterns from Rayleigh droplet beams doped with 100nm gold balls are shown.

physics.optics

Polarised Photoluminescence from Surface-Passivated PbS Nanocrystals

Effective surface-passivation of PbS nanocrystals in aqueous colloidal solution has been achieved following treatment with CdS precursors. The resultant photoluminescent emission displays two distinct components, one originating from the absorption band-edge and the other from above the absorption band-edge. We show that both of these components are strongly polarised but display distinctly different behaviours. The polarisation arising from the band-edge shows little dependence on the excitation energy while the polarisation of the above-band-edge component is strongly dependent on the excitation energy. In addition, time resolved polarisation spectroscopy reveals that the above-band-edge polarisation is restricted to the first couple of nanoseconds, while the band-edge polarisation is nearly constant over hundreds of nanoseconds. We recognise an incompatibility between the two different polarisation behaviours, which enables us to identify two distinct types of surface-passivated PbS nanocrystal.

cond-mat.mtrl-sci

Inorganic Surface Passivation of PbS Nanocrystals resulting in Strong Photoluminescent Emission

Strong photoluminescent emission has been obtained from 3 nm PbS nanocrystals in aqueous colloidal solution, following treatment with CdS precursors. The observed emission can extend across the entire visible spectrum and usually includes a peak near 1.95 eV. We show that much of the visible emission results from absorption by higher-lying excited states above 3.0 eV with subsequent relaxation to and emission from states lying above the observed band-edge of the PbS nanocrystals. The fluorescent lifetimes for this emission are in the nanosecond regime, characteristic of exciton recombination.

cond-mat.mtrl-sci