arXiv subjects

J. Wright

Publications and source records attributed to J. Wright.

17 recordsLinked to original sources

arXiv2025

Goldstone-mediated polar instability in hexagonal barium titanate

We discover a rare structural manifestation of the Goldstone paradigm in a hexagonal polytype of the archetypal ferroelectric BaTiO3. First-principles calculations confirm the Goldstone character of the order parameter, and high-resolution diffraction measurements link this to a quasi-continuous domain texture in the vicinity of the low-temperature phase transitions. Our findings highlight how changes in structural topology may be exploited to realize rich polar topologies in bulk ferroelectric perovskites.

cond-mat.mtrl-sci↗

arXiv2024

Tracking solid oxide cell electrode microstructural evolution during annealing by scanning 3D X-ray diffraction microscopy

Ni particle coarsening is a primary degradation mechanism in Ni/YSZ solid oxide cells, limiting the lifespan of these devices. In this study, we demonstrate the use of Scanning 3D X-ray diffraction (S3DXRD) with an unprecedented spatial resolution of 100 nm, to monitor the microstructural evolution within the 3D volume of a solid oxide cell subjected to ex situ heat treatment. Unlike conventional tomography, S3DXRD combines crystallographic information with spatial maps, enabling precise identification of grain boundaries and the determination of local curvature changes in the Ni microstructure. Our study reveals that the Ni phase undergoes significant structural changes during annealing, driven by grain growth. This transformation is characterized by a reduction in local curvature, particularly in regions where grains disappear. We observe that the disappearing grains are the smallest grains in the size distribution and are often located near pores. As a result, the most notable reduction in local curvature occurs at the Ni-pore interface. The quantitative characterization of polycrystalline microstructural evolution in Ni/YSZ system provides new insights into the mechanisms of Ni particle coarsening in SOC devices, potentially guiding strategies to enhance the long-term stability of SOC devices.

cond-mat.mtrl-sci↗

arXiv2024

Grain boundary strain localization in CdTe solar cell revealed by Scanning 3D X-ray diffraction microscopy

Cadmium Telluride (CdTe) solar cell technology is a promising candidate to help boost green energy production. However, impurities and structural defects are major barriers to improving the solar power conversion efficiency. Grain boundaries often act as aggregation sites for impurities, resulting in strain localization in areas of high diffusion. In this study, we demonstrate the use of scanning 3D X-ray diffraction microscopy to non-destructively make 3D maps of the grains, their phase, orientation, and local strain within a CdTe solar cell absorber layer with a resolution of 100 nm. We quantify twin boundaries and suggest how they affect grain size and orientation distribution. Local strain analysis reveals that strain is primarily associated with high misorientation grain boundaries, whereas twin boundaries do not show high strain values. We also observe that high-strain grain boundaries form a continuous pathway connected to the CdS layer. Hence, this high-strain region is believed to be associated with the diffusion of sulfur from the CdS layer along grain boundaries. This hypothesis is supported by SEM EDS and X-ray fluorescence experiments. The method and analysis demonstrated in this work can be applied to different polycrystalline materials where the characterization of grain boundary properties is essential to understand the microstructural phenomena.

cond-mat.mtrl-sci↗

arXiv2022

Rejuvenation engineering in metallic glasses by complementary stress and structure modulation

Residual stress engineering is very widely used in the design of new advanced lightweight materials. For metallic glasses the attention has been on structural changes and rejuvenation processes. High energy scanning X-ray diffraction strain mapping reveals large elastic fluctuations in metallic glasses after deformation under triaxial compression. Microindentation hardness mapping hints to a competing hardening-softening mechanism after compression and further reveals the complementary effects of stress and structure modulation. Transmission electron microscopy proves that structure modulation under room temperature deformation relates to the shear band formation that closely correlates to the distribution of elastic heterogeneities. Molecular dynamics simulations provide an atomistic understanding of the complex shear band activity in notched metallic glasses and the related fluctuations in the strain/stress heterogeneity. Thus, future focus should be given to stress engineering and elastic heterogeneity that together with structure modulation may allow to design metallic glasses with enhanced ductility and strain hardening ability.

cond-mat.mtrl-sci↗

arXiv2021

Experimental investigation of the limitations of polarisation optics for future gravitational wave detectors based on the polarisation Sagnac speedmeter

The polarisation Sagnac speedmeter interferometer has the potential to replace the Michelson interferometer as the instrumental basis for future generations of ground-based gravitational wave detectors. The quantum noise benefit of this speedmeter is dependent on high-quality polarisation optics, the polarisation beam-splitter (PBS) and quarter-waveplate (QWP) optics that are key to this detector configuration and careful consideration of the effect of birefringence in the arm cavities of the interferometer. A PBS with an extinction ratio of better than 4000 in transmission and 700 in reflection for a $41^{\circ}$ angle of incidence was characterised along with a QWP of birefringence of $\frac{\lambda}{4} + \frac{\lambda}{324}$. The cavity mirror optics of a 10m prototype polarisation Sagnac speedmeter were measured to have birefringence in the range $1\times10^{-3}$ to $2\times10^{-5}$ radians. This level of birefringence, along with the QWP imperfections, can be canceled out by careful adjustment of the QWP angle, to the extent that the extinction ratio of the PBS is the leading limitation for the polarisation Sagnac speedmeter in terms of polarisation effects.

astro-ph.IM↗

arXiv2018

Information Erasure

Information is central to thermodynamics, providing the grounds to the formulation of the theory in powerful abstract statistical terms. One must not forget, however, that, as put by Landauer, {\it information is physical}. This means that the processing of information will be unavoidably linked to the costs of manipulating the real physical systems carrying the information. Here we will focus on the particular process of erasing information, which plays a fundamental role in the description of heat engines. We will review Landauer's principle and the associated erasure energy cost. We will also show, following the recent contributions from Vaccaro and Barnett, that cost of erasing does not need to be paid with energy, but with any other conserved quantity. Finally, we will address the issue of designing heat engines based on these new concepts.

quant-ph↗

arXiv2017

SiW ECAL for future $e^+e^-$ collider

Calorimeters with silicon detectors have many unique features and are proposed for several world-leading experiments. We discuss the tests of the first three 18x18 cm$^2$ layers segmented into 1024 pixels of the technological prototype of the silicon-tungsten electromagnetic calorimeter for a future $e^+e^-$ collider. The tests have beem performed in November 2015 at CERN SPS beam line.

physics.ins-det↗

arXiv2016

Control of a velocity-sensitive audio-band quantum non-demolition interferometer

The Sagnac speed meter interferometer topology can potentially provide enhanced sensitivity to gravitational waves in the audio-band compared to equivalent Michelson interferometers. A challenge with the Sagnac speed meter interferometer arises from the intrinsic lack of sensitivity at low frequencies where the velocity-proportional signal is smaller than the noise associated with the sensing of the signal. Using as an example the on-going proof-of-concept Sagnac speed meter experiment in Glasgow, we quantify the problem and present a solution involving the extraction of a small displacement-proportional signal. This displacement signal can be combined with the existing velocity signal to enhance low frequency sensitivity, and we derive optimal filters to accomplish this for different signal strengths. We show that the extraction of the displacement signal for low frequency control purposes can be performed without reducing significantly the quantum non-demolition character of this type of interferometer.

gr-qc↗

arXiv2015

Design Studies and Commissioning Plans for PARS Experimental Program

PARS (Plasma Acceleration Research Station) is an electron beam driven plasma wakefield acceleration test stand proposed for VELA/CLARA facility in Daresbury Laboratory. In order to optimise various operational configurations, 2D numerical studies were performed by using VSIM for a range of parameters such as bunch length, radius, plasma density and positioning of the bunches with respect to each other for the two-beam acceleration scheme. In this paper, some of these numerical studies and considered measurement methods are presented.

physics.acc-ph↗

arXiv2015

Quantum noise of non-ideal Sagnac speed meter interferometer with asymmetries

The speed meter concept has been identified as a technique that can potentially provide laser-interferometric measurements at a sensitivity level which surpasses the Standard Quantum Limit (SQL) over a broad frequency range. As with other sub-SQL measurement techniques, losses play a central role in speed meter interferometers and they ultimately determine the quantum noise limited sensitivity that can be achieved. So far in the literature, the quantum noise limited sensitivity has only been derived for lossless or lossy cases using certain approximations (for instance that the arm cavity round trip loss is small compared to the arm cavity mirror transmission). In this article we present a generalised, analytical treatment of losses in speed meters that allows accurate calculation of the quantum noise limited sensitivity of Sagnac speed meters with arm cavities. In addition, our analysis allows us to take into account potential imperfections in the interferometer such as an asymmetric beam splitter or differences of the reflectivities of the two arm cavity input mirrors. Finally,we use the examples of the proof-of-concept Sagnac speed meter currently under construction in Glasgow and a potential implementation of a Sagnac speed meter in the Einstein Telescope (ET) to illustrate how our findings affect Sagnac speed meters with meter- and kilometre-long baselines.

quant-ph↗

arXiv2012

New measurements of high-momentum nucleons and short-range structures in nuclei

We present new measurements of electron scattering from high-momentum nucleons in nuclei. These data allow an improved determination of the strength of two-nucleon correlations for several nuclei, including light nuclei where clustering effects can, for the first time, be examined. The data also include the kinematic region where three-nucleon correlations are expected to dominate.

nucl-ex↗

arXiv2011

Adiabatic passage in the presence of noise

We report on an experimental investigation of rapid adiabatic passage (RAP) in a trapped barium ion system. RAP is implemented on the transition from the $6S_{1/2}$ ground state to the metastable $5D_{5/2}$ level by applying a laser at 1.76 $μ$m. We focus on the interplay of laser frequency noise and laser power in shaping the effectiveness of RAP, which is commonly assumed to be a robust tool for high efficiency population transfer. However, we note that reaching high state transfer fidelity requires a combination of small laser linewidth and large Rabi frequency.

physics.atom-ph↗

arXiv2011

Automatically Training a Problematic Dialogue Predictor for a Spoken Dialogue System

Spoken dialogue systems promise efficient and natural access to a large variety of information sources and services from any phone. However, current spoken dialogue systems are deficient in their strategies for preventing, identifying and repairing problems that arise in the conversation. This paper reports results on automatically training a Problematic Dialogue Predictor to predict problematic human-computer dialogues using a corpus of 4692 dialogues collected with the 'How May I Help You' (SM) spoken dialogue system. The Problematic Dialogue Predictor can be immediately applied to the system's decision of whether to transfer the call to a human customer care agent, or be used as a cue to the system's dialogue manager to modify its behavior to repair problems, and even perhaps, to prevent them. We show that a Problematic Dialogue Predictor using automatically-obtainable features from the first two exchanges in the dialogue can predict problematic dialogues 13.2% more accurately than the baseline.

cs.AI↗

arXiv2010

Scaling of the F_2 structure function in nuclei and quark distributions at x>1

We present new data on electron scattering from a range of nuclei taken in Hall C at Jefferson Lab. For heavy nuclei, we observe a rapid falloff in the cross section for $x>1$, which is sensitive to short range contributions to the nuclear wave-function, and in deep inelastic scattering corresponds to probing extremely high momentum quarks. This result agrees with higher energy muon scattering measurements, but is in sharp contrast to neutrino scattering measurements which suggested a dramatic enhancement in the distribution of the `super-fast' quarks probed at x>1. The falloff at x>1 is noticeably stronger in ^2H and ^3He, but nearly identical for all heavier nuclei.

nucl-ex↗

arXiv2009

New measurements of the EMC effect in very light nuclei

New Jefferson Lab data are presented on the nuclear dependence of the inclusive cross section from 2H, 3He, 4He, 9Be and 12C for 0.3<x<0.9, Q^2 approximately 3-6 GeV^2. These data represent the first measurement of the EMC effect for 3He at large x and a significant improvement for 4He. The data do not support previous A-dependent or density-dependent fits to the EMC effect and suggest that the nuclear dependence of the quark distributions may depend on the local nuclear environment.

nucl-ex↗

arXiv2004

A Hot Saturn Planet Orbiting HD 88133, from the N2K Consortium

The N2K consortium is carrying out a distributed observing campaign with the Keck, Magellan and Subaru telescopes, as well as the automatic photometric telescopes of Fairborn Observatory, in order to search for short-period gas giant planets around metal-rich stars. We have established a reservoir of more than 14,000 main sequence and subgiant stars, closer than 110 pc, brighter than V=10.5 and with $0.4 < B-V < 1.2$. Because the fraction of stars with planets is a sensitive function of stellar metallicity, a broadband photometric calibration has been developed to identify a subset of 2000 stars with [Fe/H] $> 0.1$ dex for this survey. We outline the strategy and report the detection of a planet orbiting the metal-rich G5IV star HD 88133 with a period of 3.41 days, semi-velocity amplitude, K=35.7 \mse and \msini = 0.29 \mjupe. Photometric observations reveal that HD 88133 is constant on the 3.415-day radial velocity period to a limit of 0.0005 mag. Despite a transit probability of 15.6%, our photometry rules out the shallow transits predicted by the large stellar radius.

astro-ph↗

arXiv2002

Oscillations in alpha Cen A observed with UCLES at the AAT

We report Doppler measurements of alpha Cen A from time-series spectroscopy made with UCLES at the 3.9-m AAT. Wavelength calibration using an iodine absorption cell produced high-precision velocity measurements, whose power spectrum shows the clear signature of solar-like oscillations, confirming the detection reported by Bouchy and Carrier (2001).

astro-ph↗