SearcharxivSearch

arXiv subjects

J. Yu

Publications and source records attributed to J. Yu.

At least 37 records · Page 2Linked to original sources

First Measurement of Correlated Charge Noise in Superconducting Qubits at an Underground Facility

We measure space- and time-correlated charge jumps on a four-qubit device, operating 107 meters below the Earth's surface in a low-radiation, cryogenic facility designed for the characterization of low-threshold particle detectors. The rock overburden of this facility reduces the cosmic ray muon flux by over 99% compared to laboratories at sea level. Combined with 4$\pi$ coverage of a movable lead shield, this facility enables quantifiable control over the flux of ionizing radiation on the qubit device. Long-time-series charge tomography measurements on these weakly charge-sensitive qubits capture discontinuous jumps in the induced charge on the qubit islands, corresponding to the interaction of ionizing radiation with the qubit substrate. The rate of these charge jumps scales with the flux of ionizing radiation on the qubit package, as characterized by a series of independent measurements on another energy-resolving detector operating simultaneously in the same cryostat with the qubits. Using lead shielding, we achieve a minimum charge jump rate of 0.19$^{+0.04}_{-0.03}$ mHz, almost an order of magnitude lower than that measured in surface tests, but a factor of roughly eight higher than expected based on reduction of ambient gammas alone. We operate four qubits for over 22 consecutive hours with zero correlated charge jumps at length scales above three millimeters.

quant-ph

HOD-Dependent Systematics in Emission Line Galaxies for the DESI 2024 BAO analysis

The Dark Energy Spectroscopic Instrument (DESI) will provide precise measurements of Baryon Acoustic Oscillations (BAO) to constrain the expansion history of the Universe and set stringent constraints on dark energy. Therefore, precise control of the global error budget due to various systematic effects is required for the DESI 2024 BAO analysis. In this work, we focus on the robustness of the BAO analysis against the Halo Occupation Distribution (HOD) modeling for the Emission Line Galaxy (ELG) tracer. Based on a common dark matter simulation, our analysis relies on HOD mocks tuned to early DESI data, namely the One-Percent survey data. To build the mocks, we use several HOD models for the ELG tracer as well as extensions to the baseline HOD models. Among these extensions, we consider distinct recipes for galactic conformity and assembly bias. We perform two independent analyses in the Fourier space and in the configuration space. We recover the BAO signal from two-point measurements after performing reconstruction on our mocks. Additionally, we also apply the control variates technique to reduce sample variance noise. Our BAO analysis can recover the isotropic BAO parameter $\alpha_\text{iso}$ within 0.1\% and the Alcock Paczynski parameter $\alpha_\text{AP}$ within 0.3\%. Overall, we find that our systematic error due to the HOD dependence is below 0.17\%, with the Fourier space analysis being more robust against the HOD systematics. We conclude that our analysis pipeline is robust enough against the HOD systematics for the ELG tracer in the DESI 2024 BAO analysis.

astro-ph.CO

HOD-Dependent Systematics for Luminous Red Galaxies in the DESI 2024 BAO Analysis

In this paper, we present the estimation of systematics related to the halo occupation distribution (HOD) modeling in the baryon acoustic oscillations (BAO) distance measurement of the Dark Energy Spectroscopic Instrument (DESI) 2024 analysis. This paper focuses on the study of HOD systematics for luminous red galaxies (LRG). We consider three different HOD models for LRGs, including the base 5-parameter vanilla model and two extensions to it, that we refer to as baseline and extended models. The baseline model is described by the 5 vanilla HOD parameters, an incompleteness factor and a velocity bias parameter, whereas the extended one also includes a galaxy assembly bias and a satellite profile parameter. We utilize the 25 dark matter simulations available in the AbacusSummit simulation suite at $z=$ 0.8 and generate mock catalogs for our different HOD models. To test the impact of the HOD modeling in the position of the BAO peak, we run BAO fits for all these sets of simulations and compare the best-fit BAO-scaling parameters $\alpha_{\rm iso}$ and $\alpha_{\rm AP}$ between every pair of HOD models. We do this for both Fourier and configuration spaces independently, using post-reconstruction measurements. We find a 3.3$\sigma$ detection of HOD systematic for $\alpha_{\rm AP}$ in configuration space with an amplitude of 0.19%. For the other cases, we did not find a 3$\sigma$ detection, and we decided to compute a conservative estimation of the systematic using the ensemble of shifts between all pairs of HOD models. By doing this, we quote a systematic with an amplitude of 0.07% in $\alpha_{\rm iso}$ for both Fourier and configuration spaces; and of 0.09% in $\alpha_{\rm AP}$ for Fourier space.

astro-ph.CO

Optimal Reconstruction of Baryon Acoustic Oscillations for DESI 2024

Baryon acoustic oscillations (BAO) provide a robust standard ruler to measure the expansion history of the Universe through galaxy clustering. Density-field reconstruction is now a widely adopted procedure for increasing the precision and accuracy of the BAO detection. With the goal of finding the optimal reconstruction settings to be used in the DESI 2024 galaxy BAO analysis, we assess the sensitivity of the post-reconstruction BAO constraints to different choices in our analysis configuration, performing tests on blinded data from the first year of DESI observations (DR1), as well as on mocks that mimic the expected clustering and selection properties of the DESI DR1 target samples. Overall, we find that BAO constraints remain robust against multiple aspects in the reconstruction process, including the choice of smoothing scale, treatment of redshift-space distortions, fiber assignment incompleteness, and parameterizations of the BAO model. We also present a series of tests that DESI followed in order to assess the maturity of the end-to-end galaxy BAO pipeline before the unblinding of the large-scale structure catalogs.

astro-ph.CO

Ultrastable lasers: investigations of crystalline mirrors and closed cycle cooling at 124 K

We have investigated crystalline AlGaAs/GaAs optical coatings with three ultra-stable cavities operating at 4 K, 16 K, 124 K and 297 K. The response of the resonance frequencies of cavities to variations in optical power indicates effects beyond the photo-thermo-optic effect observed in dielectric coatings. These effects are strongly dependent on the intensity of the intracavity light at 1.5~\textmu m. When the rear side of the mirrors is illuminated with external light, we observe a prominent photo-modified birefringence for photon energies above the GaAs bandgap, which points to a possible mechanism relating our observations to the semiconductor properties of the coatings. Separately, we also present a low maintenance evolution of our 124 K silicon cavity system where the liquid nitrogen based cooling system is replaced with closed cycle cooling from a pulse-tube cryo-cooler.

physics.optics

Baryon Acoustic Oscillation Theory and Modelling Systematics for the DESI 2024 results

This paper provides a comprehensive overview of how fitting of Baryon Acoustic Oscillations (BAO) is carried out within the upcoming Dark Energy Spectroscopic Instrument's (DESI) 2024 results using its DR1 dataset, and the associated systematic error budget from theory and modelling of the BAO. We derive new results showing how non-linearities in the clustering of galaxies can cause potential biases in measurements of the isotropic ($\alpha_{\mathrm{iso}}$) and anisotropic ($\alpha_{\mathrm{ap}}$) BAO distance scales, and how these can be effectively removed with an appropriate choice of reconstruction algorithm. We then demonstrate how theory leads to a clear choice for how to model the BAO and develop, implement and validate a new model for the remaining smooth-broadband (i.e., without BAO) component of the galaxy clustering. Finally, we explore the impact of all remaining modelling choices on the BAO constraints from DESI using a suite of high-precision simulations, arriving at a set of best-practices for DESI BAO fits, and an associated theory and modelling systematic error. Overall, our results demonstrate the remarkable robustness of the BAO to all our modelling choices and motivate a combined theory and modelling systematic error contribution to the post-reconstruction DESI BAO measurements of no more than $0.1\%$ ($0.2\%$) for its isotropic (anisotropic) distance measurements. We expect the theory and best-practices laid out to here to be applicable to other BAO experiments in the era of DESI and beyond.

astro-ph.CO

Physics Opportunities at a Beam Dump Facility at PIP-II at Fermilab and Beyond

The Fermilab Proton-Improvement-Plan-II (PIP-II) is being implemented in order to support the precision neutrino oscillation measurements at the Deep Underground Neutrino Experiment, the U.S. flagship neutrino experiment. The PIP-II LINAC is presently under construction and is expected to provide 800~MeV protons with 2~mA current. This white paper summarizes the outcome of the first workshop on May 10 through 13, 2023, to exploit this capability for new physics opportunities in the kinematic regime that are unavailable to other facilities, in particular a potential beam dump facility implemented at the end of the LINAC. Various new physics opportunities have been discussed in a wide range of kinematic regime, from eV scale to keV and MeV. We also emphasize that the timely establishment of the beam dump facility at Fermilab is essential to exploit these new physics opportunities.

hep-ex

Increasing the rate capability for the cryogenic stopping cell of the FRS Ion Catcher

At the FRS Ion Catcher (FRS-IC), projectile and fission fragments are produced at relativistic energies, separated in-flight, energy-bunched, slowed down, and thermalized in the ultra-pure helium gas-filled cryogenic stopping cell (CSC). Thermalized nuclei are extracted from the CSC using a combination of DC and RF electric fields and gas flow. This CSC also serves as the prototype CSC for the Super-FRS, where exotic nuclei will be produced at unprecedented rates making it possible to go towards the extremes of the nuclear chart. Therefore, it is essential to efficiently extract thermalized exotic nuclei from the CSC under high beam rate conditions, in order to use the rare exotic nuclei which come as cocktail beams. The extraction efficiency dependence on the intensity of the impinging beam into the CSC was studied with a primary beam of 238U and its fragments. Tests were done with two different versions of the DC electrode structure inside the cryogenic chamber, the standard 1 m long and a short 0.5 m long DC electrode. In contrast to the rate capability of 10^4 ions/s with the long DC electrode, results show no extraction efficiency loss up to the rate of 2x10^5 ions/s with the new short DC electrode. This order of magnitude increase of the rate capability paves the way for new experiments at the FRS-IC, including exotic nuclei studies with in-cell multi-nucleon transfer reactions. The results further validate the design concept of the CSC for the Super-FRS, which was developed to effectively manage beams of even higher intensities.

physics.ins-det

Charge qubits in the USC regime for quantum state transfer

We study the feasibility of reaching the ultrastrong (USC) and deep-strong coupling (DSC) regimes of light-matter interaction, in particular at resonance condition, with a superconducting charge qubit, also known as Cooper-Pair box (CPB). We numerically show that by shunting the charge qubit with a high-impedance LC-circuit, one can maximally reach both USC and DSC regimes exceeding the classical upper bound $|g|\leq \sqrt{ω_qω_r}/2$ between two harmonic systems with frequencies $ω_q$ and $ω_r$. As an application, we propose a hybrid system consisting of two CPBs ultrastrongly coupled to an LC-oscillator as a mediator device that catalyzes a quantum state transfer protocol between a pair of transmon qubits, with all the parties subjected to local thermal noise. We demonstrate that the QST protocol maximizes its efficiency when the mediator operates in the USC regime, exhibiting comparable times with proposals relying on highly coherent and controllable mediators requiring state-preparation or post-selection. This work opens the door for studying light-matter interactions beyond the quantum Rabi model at extreme coupling strengths, providing a new building block for applications within quantum computation and quantum information processing.

quant-ph

The DESI Survey Validation: Results from Visual Inspection of Bright Galaxies, Luminous Red Galaxies, and Emission Line Galaxies

The Dark Energy Spectroscopic Instrument (DESI) Survey has obtained a set of spectroscopic measurements of galaxies to validate the final survey design and target selections. To assist in these tasks, we visually inspect (VI) DESI spectra of approximately 2,500 bright galaxies, 3,500 luminous red galaxies (LRGs), and 10,000 emission line galaxies (ELGs), to obtain robust redshift identifications. We then utilize the VI redshift information to characterize the performance of the DESI operation. Based on the VI catalogs, our results show that the final survey design yields samples of bright galaxies, LRGs, and ELGs with purity greater than $99\%$. Moreover, we demonstrate that the precision of the redshift measurements is approximately 10 km/s for bright galaxies and ELGs and approximately 40 km/s for LRGs. The average redshift accuracy is within 10 km/s for the three types of galaxies. The VI process also helps improve the quality of the DESI data by identifying spurious spectral features introduced by the pipeline. Finally, we show examples of unexpected real astronomical objects, such as Ly$α$ emitters and strong lensing candidates, identified by VI. These results demonstrate the importance and utility of visually inspecting data from incoming and upcoming surveys, especially during their early operation phases.

astro-ph.CO

Substrate-transferred GaAs/AlGaAs crystalline coatings for gravitational-wave detectors: A review of the state of the art

In this Perspective we summarize the status of technological development for large-area and low-noise substrate-transferred GaAs/AlGaAs (AlGaAs) crystalline coatings for interferometric gravitational-wave (GW) detectors. These topics were originally presented in a workshop† bringing together members of the GW community from the laser interferometer gravitational-wave observatory (LIGO), Virgo, and KAGRA collaborations, along with scientists from the precision optical metrology community, and industry partners with extensive expertise in the manufacturing of said coatings. AlGaAs-based crystalline coatings present the possibility of GW observatories having significantly greater range than current systems employing ion-beam sputtered mirrors. Given the low thermal noise of AlGaAs at room temperature, GW detectors could realize these significant sensitivity gains, while potentially avoiding cryogenic operation. However, the development of large-area AlGaAs coatings presents unique challenges. Herein, we describe recent research and development efforts relevant to crystalline coatings, covering characterization efforts on novel noise processes, as well as optical metrology on large-area (~10 cm diameter) mirrors. We further explore options to expand the maximum coating diameter to 20 cm and beyond, forging a path to produce low-noise AlGaAs mirrors amenable to future GW detector upgrades, while noting the unique requirements and prospective experimental testbeds for these novel materials.

physics.optics

Snowmass 2021 White Paper: Cosmogenic Dark Matter and Exotic Particle Searches in Neutrino Experiments

The signals from outer space and their detection have been playing an important role in particle physics, especially in discoveries of and searches for physics beyond the Standard Model (BSM); beyond the evidence of dark matter (DM), for example, the neutrinos produced from the dark matter annihilation is important for the indirect DM searches. Moreover, a wide range of new, well-motivated physics models and dark-sector scenarios have been proposed in the last decade, predicting cosmogenic signals complementary to those in the conventional direct detection of particle-like dark matter. Most notably, various mechanisms to produce (semi-)relativistic DM particles in the present universe (e.g. boosted dark matter) have been put forward, while being consistent with current observational and experimental constraints on DM. The resulting signals often have less intense and more energetic fluxes, to which underground, kiloton-scale neutrino detectors can be readily sensitive. In addition, the scattering of slow-moving DM can give rise to a sizable energy deposit if the underlying dark-sector model allows for a large mass difference between the initial and final state particles, and the neutrino experiments with large volume detectors are well suited for exploring these opportunities. This White Paper is devoted to discussing the scientific importance of the cosmogenic dark matter and exotic particle searches, not only overviewing the recent efforts in both the theory and the experiment communities but also providing future perspectives and directions on this research branch. A landscape of technologies used in neutrino detectors and their complementarity is discussed, and the current and developing analysis strategies are outlined.

hep-ph

Characterising the AGB bump and its potential to constrain mixing processes in stellar interiors

In the 90's, theoretical studies motivated the use of the asymptotic-giant branch bump (AGBb) as a standard candle given the weak dependence between its luminosity and stellar metallicity. Because of the small size of observed asymptotic-giant branch (AGB) samples, detecting the AGBb is not an easy task. However, this is now possible thanks to the wealth of data collected by the CoRoT, Kepler, and TESS space-borne missions. It is well-know that the AGB bump provides valuable information on the internal structure of low-mass stars, particularly on mixing processes such as core overshooting during the core He-burning phase. In this context, we analysed ~ 4,000 evolved giants observed by Kepler and TESS, including red-giant branch stars and AGB stars, for which asteroseismic and spectrometric data are available. By using statistical mixture models, we detected the AGBb both in frequency at maximum oscillation power and in effective temperature. Then, we used the Modules for Experiments in Stellar Astrophysics MESA stellar evolution code to model AGB stars and match the AGBb occurrence with observations. From observations, we could derive the AGBb location in 15 bins of mass and metallicity. We noted that the higher the mass, the later the AGBb occurs in the evolutionary track, which agrees with theoretical works. Moreover, we found a slight increase of the luminosity at the AGBb when the metallicity increases, which complicates the use of the AGBb as a standard candle. By fitting those observations with stellar models, we noticed that low-mass stars (M < 1.0 $M_{\odot}$) require a small core overshooting region during the core He-burning phase. This core overshooting extent increases toward high mass, but above M > 1.5 $M_{\odot}$ we found that the AGBb location cannot be reproduced with a realistic He-core overshooting alone, and instead additional mixing processes have to be invoked.

astro-ph.SR

Measurement of the ($π^-$, Ar) total hadronic cross section at the LArIAT experiment

We present the first measurement of the negative pion total hadronic cross section on argon, which we performed at the Liquid Argon In A Testbeam (LArIAT) experiment. All hadronic reaction channels, as well as hadronic elastic interactions with scattering angle greater than 5~degrees are included. The pions have a kinetic energies in the range 100-700~MeV and are produced by a beam of charged particles impinging on a solid target at the Fermilab Test Beam Facility. LArIAT employs a 0.24~ton active mass Liquid Argon Time Projection Chamber (LArTPC) to measure the pion hadronic interactions. For this measurement, LArIAT has developed the ``thin slice method", a new technique to measure cross sections with LArTPCs. While generally higher than the prediction, our measurement of the ($π^-$,Ar) total hadronic cross section is in agreement with the prediction of the Geant4 model when considering a model uncertainty of $\sim$5.1\%.

hep-ex

Superconducting Circuit Architecture for Digital-Analog Quantum Computing

We propose a superconducting circuit architecture suitable for digital-analog quantum computing (DAQC) based on an enhanced NISQ family of nearest-neighbor interactions. DAQC makes a smart use of digital steps (single qubit rotations) and analog blocks (parametrized multiqubit operations) to outperform digital quantum computing algorithms. Our design comprises a chain of superconducting charge qubits coupled by superconducting quantum interference devices (SQUIDs). Using magnetic flux control, we can activate/deactivate exchange interactions, double excitation/de-excitations, and others. As a paradigmatic example, we present an efficient simulation of an $\ell\times h$ fermion lattice (with $2<\ell \leq h$), using only $2(2\ell+1)^2+24$ analog blocks. The proposed architecture design is feasible in current experimental setups for quantum computing with superconducting circuits, opening the door to useful quantum advantage with fewer resources.

quant-ph

Low-Energy Physics in Neutrino LArTPCs

In this white paper, we outline some of the scientific opportunities and challenges related to detection and reconstruction of low-energy (less than 100 MeV) signatures in liquid argon time-projection chamber (LArTPC) detectors. Key takeaways are summarized as follows. 1) LArTPCs have unique sensitivity to a range of physics and astrophysics signatures via detection of event features at and below the few tens of MeV range. 2) Low-energy signatures are an integral part of GeV-scale accelerator neutrino interaction final states, and their reconstruction can enhance the oscillation physics sensitivities of LArTPC experiments. 3) BSM signals from accelerator and natural sources also generate diverse signatures in the low-energy range, and reconstruction of these signatures can increase the breadth of BSM scenarios accessible in LArTPC-based searches. 4) Neutrino interaction cross sections and other nuclear physics processes in argon relevant to sub-hundred-MeV LArTPC signatures are poorly understood. Improved theory and experimental measurements are needed. Pion decay-at-rest sources and charged particle and neutron test beams are ideal facilities for experimentally improving this understanding. 5) There are specific calibration needs in the low-energy range, as well as specific needs for control and understanding of radiological and cosmogenic backgrounds. 6) Novel ideas for future LArTPC technology that enhance low-energy capabilities should be explored. These include novel charge enhancement and readout systems, enhanced photon detection, low radioactivity argon, and xenon doping. 7) Low-energy signatures, whether steady-state or part of a supernova burst or larger GeV-scale event topology, have specific triggering, DAQ and reconstruction requirements that must be addressed outside the scope of conventional GeV-scale data collection and analysis pathways.

physics.ins-det

Spin-valley locking, bulk quantum Hall effect and chiral surface state in a noncentrosymmetric Dirac semimetal BaMnSb$_2$

Spin-valley locking in the band structure of monolayers of MoS$_2$ and other group-VI dichalcogenides has attracted enormous interest, since it offers potential for valleytronic and optoelectronic applications. Such an exotic electronic state has sparsely been seen in bulk materials. Here, we report spin-valley locking in a bulk Dirac semimetal BaMnSb$_2$. We find valley and spin are inherently coupled for both valence and conduction bands in this material. This is revealed by comprehensive studies using first principle calculations, tight-binding and effective model analyses, angle-resolved photoemission spectroscopy and quantum transport measurements. Moreover, this material also exhibits a stacked quantum Hall effect. The spin-valley degeneracy extracted from the plateau height of quantized Hall resistivity is close to 2. This result, together with the observed Landau level spin splitting, further confirms the spin-valley locking picture. In the extreme quantum limit, we have also observed a two-dimensional chiral metal at the side surface, which represents a novel topological quantum liquid. These findings establish BaMnSb$_2$ as a rare platform for exploring coupled spin and valley physics in bulk single crystals and accessing 3D interacting topological states.

cond-mat.mtrl-sci

The Potential of Ti$_3$C$_2$T$_X$ Nano-sheets (MXenes) for Nanoscale Solid Lubrication Revealed by Friction Force Microscopy

Ti$_3$C$_2$T$_X$ nano-sheets (MXenes) are an emerging class of two-dimensional materials with outstanding potential to be employed in energy storage, catalysis, and triboelectric applications, on length scales ranging from the nano- to macroscopic. Despite rapidly accelerating interest in this new class of materials, their nanoscale frictional properties and in particular, their potential for solid lubrication on the nanoscale, have not been explored in detail yet. In this short communication, we present the first results on the nanoscale frictional characteristics of MXenes, in the form of a friction map obtained on an isolated Ti$_3$C$_2$T$_x$ nano-sheet deposited on a silicon dioxide substrate via friction force microscopy. Our experiments reveal that few-layer Ti$_3$C$_2$T$_x$ nano-sheets indeed act as solid lubricants on the nanoscale, reducing friction on the silicon dioxide substrates, although not as effectively as few-layer graphene. The results reported here pave the way for further studies focusing on nanoscale solid lubrication achieved by Ti$_3$C$_2$T$_X$ (MXene) nano-sheets.

physics.app-ph