arXiv subjects

Jacco H. Snoeijer

Publications and source records attributed to Jacco H. Snoeijer.

At least 91 records · Page 5Linked to original sources

arXiv2012

Contact angles on a soft solid: from Young's law to Neumann's law

The contact angle that a liquid drop makes on a soft substrate does not obey the classical Young's relation, since the solid is deformed elastically by the action of the capillary forces. The finite elasticity of the solid also renders the contact angles different from that predicted by Neumann's law, which applies when the drop is floating on another liquid. Here we derive an elasto-capillary model for contact angles on a soft solid, by coupling a mean-field model for the molecular interactions to elasticity. We demonstrate that the limit of vanishing elastic modulus yields Neumann's law or a slight variation thereof, depending on the force transmission in the solid surface layer. The change in contact angle from the rigid limit (Young) to the soft limit (Neumann) appears when the length scale defined by the ratio of surface tension to elastic modulus $γ/E$ reaches a few molecular sizes.

physics.flu-dyn↗

arXiv2012

Initial spreading of low-viscosity drops on partially wetting surfaces

Liquid drops start spreading directly after brought into contact with a partial wetting substrate. Although this phenomenon involves a three-phase contact line, the spreading motion is very fast. We study the initial spreading dynamics of low-viscosity drops, using two complementary methods: Molecular Dynamics simulations and high-speed imaging. We access previously unexplored length- and time-scales, and provide a detailed picture on how the initial contact between the liquid drop and the solid is established. Both methods unambiguously point towards a spreading regime that is independent of wettability, with the contact radius growing as the square root of time.

physics.flu-dyn↗

arXiv2012

Capillary Pressure and Contact Line Force on a Soft Solid

The surface free energy, or surface tension, of a liquid interface gives rise to a pressure jump when the interface is curved. Here we show that a similar capillary pressure arises at the interface of soft solids. We present experimental evidence that immersion of a thin elastomeric wire into a liquid induces a substantial elastic compression due to the solid capillary pressure at the bottom. We quantitatively determine the effective surface tension from the elastic displacement field, and find a value comparable to the liquid-vapor surface tension. Most importantly, these results also reveal the way the liquid pulls on the solid close to the contact line: the capillary force is not oriented along the liquid-air interface, nor perpendicularly to the solid surface, as previously hypothesized, but towards the interior of the liquid.

physics.flu-dyn↗

arXiv2011

Air Entrainment by Viscous Contact Lines

The entrainment of air by advancing contact lines is studied by plunging a solid plate into a very viscous liquid. Above a threshold velocity, we observe the formation of an extended air film, typically 10 microns thick, which subsequently decays into air bubbles. Exploring a large range of viscous liquids, we find an unexpectedly weak dependence of entrainment speed on liquid viscosity, pointing towards a crucial role of the flow inside the air film. This induces a striking asymmetry between wetting and dewetting: while the breakup of the air film strongly resembles the dewetting of a liquid film, the wetting speeds are larger by orders of magnitude.

physics.flu-dyn↗

arXiv2011

Maximum speed of dewetting on a fiber

A solid object can be coated by a nonwetting liquid since a receding contact line cannot exceed a critical speed. We theoretically investigate this forced wetting transition for axisymmetric menisci on fibers of varying radii. First, we use a matched asymptotic expansion and derive the maximum speed of dewetting. For all radii we find the maximum speed occurs at vanishing apparent contact angle. To further investigate the transition we numerically determine the bifurcation diagram for steady menisci. It is found that the meniscus profiles on thick fibers are smooth, even when there is a film deposited between the bath and the contact line, while profiles on thin fibers exhibit strong oscillations. We discuss how this could lead to different experimental scenarios of film deposition.

physics.flu-dyn↗

arXiv2011

Freezing singularities in water drops

In this fluid dynamics video we show how a drop of water freezes into a singular shape when deposited on a cold surface. The process of solidification can be observed very clearly due to the change in refraction when water turns into ice. The drop remains approximately spherical during most of the process, with a freezing front moving upwards and smoothly following the interface. However, at the final stage of freezing, when the last cap of liquid turns into ice, a singular tip develops spontaneously. Interestingly, the sharp tip of the ice drop acts as a preferential site for deposition of water vapour, and a beautiful "tree" of ice crystals develops right at the tip. The tip singularity attracts the vapour in analogy to a sharp lightning rod attracting lightning.

physics.flu-dyn↗

arXiv2011

Elastocapillary instability under partial wetting conditions: bending versus buckling

The elastocapillary instability of a flexible plate plunged in a liquid bath is analysed theoretically. We show that the plate can bend due to two separate destabilizing mechanisms, when the liquid is partially wetting the solid. For contact angles $θ_e > π/2$, the capillary forces acting tangential to the surface are compressing the plate and can induce a classical buckling instability. However, a second mechanism appears due to capillary forces normal to surface. These induce a destabilizing torque that tends to bend the plate for any value of the contact angle $θ_e > 0$. We denote these mechanisms as "buckling" and "bending" respectively and identify the two corresponding dimensionless parameters that govern the elastocapillary stability. The onset of instability is determined analytically and the different bifurcation scenarios are worked out for experimentally relevant conditions.

physics.flu-dyn↗

arXiv2011

Elastic deformation due to tangential capillary forces

A sessile liquid drop can deform the substrate on which it rests if the solid is sufficiently "soft". In this paper we compute the detailed spatial structure of the capillary forces exerted by the drop on the solid substrate using a model based on Density Functional Theory. We show that, in addition to the normal forces, the drop exerts a previously unaccounted tangential force. The resultant effect on the solid is a pulling force near the contact line directed towards the interior of the drop, i.e. not along the interface. The resulting elastic deformations of the solid are worked out and illustrate the importance of the tangential forces.

physics.flu-dyn↗

arXiv2011

Effect of Impurities in Description of Surface Nanobubbles

Surface nanobubbles emerging at solid-liquid interfaces of submerged hydrophobic surfaces show extreme stability and very small (gas-side) contact angles. In a recent study Ducker (W. A. Ducker, Langmuir 25, 8907 (2009).) conjectured that these effects may arise from the presence of impurities at the air-water interface of the nanobubbles. In this paper we present a quantitative analysis of this hypothesis by estimating the dependence of the contact angle and the Laplace pressure on the fraction of impurity coverage at the liquid-gas interface. We first develop a general analytical framework to estimate the effect of impurities (ionic or non-ionic) in lowering the surface tension of a given air-water interface. We then employ this model to show that the (gas-side) contact angle and the Laplace pressure across the nanobubbles indeed decrease considerably with an increase in the fractional coverage of the impurities, though still not sufficiently small to account for the observed surface nanobubble stability. The proposed model also suggests the dependencies of the Laplace pressure and the contact angle on the type of impurity.

physics.flu-dyn↗

arXiv2011

Order-to-disorder transition in ring-shaped colloidal stains

A colloidal dispersion droplet evaporating from a surface, such as a drying coffee drop, leaves a distinct ring-shaped stain. Although this mechanism is frequently used for particle self-assembly, the conditions for crystallization have remained unclear. Our experiments with monodisperse colloidal particles reveal a structural transition in the stain, from ordered crystals to disordered packings. We show that this sharp transition originates from a temporal singularity of the flow velocity inside the evaporating droplet at the end of its life. When the deposition speed is low, particles have time to arrange by Brownian motion, while at the end, high-speed particles are jammed into a disordered phase.

physics.flu-dyn↗

arXiv2011

Origin of line tension for a Lennard-Jones nanodroplet

The existence and origin of line tension has remained controversial in literature. To address this issue we compute the shape of Lennard-Jones nanodrops using molecular dynamics and compare them to density functional theory in the approximation of the sharp kink interface. We show that the deviation from Young's law is very small and would correspond to a typical line tension length scale (defined as line tension divided by surface tension) similar to the molecular size and decreasing with Young's angle. We propose an alternative interpretation based on the geometry of the interface at the molecular scale.

physics.flu-dyn↗

arXiv2011

How water droplets evaporate on a superhydrophobic substrate

Evaporation of water droplets on a superhydrophobic substrate, on which the contact line is pinned, is investigated. While previous studies mainly focused on droplets with contact angles smaller than 90^\circ, here we analyze almost the full range of possible contact angles (10^\circ -150^\circ). The greater contact angles and pinned contact lines can be achieved by the use of superhydrophobic Carbon Nanofiber substrates. The time-evolutions of the contact angle and the droplet mass are examined. The experimental data is in good quantitative agreement with the model presented by Popov (Physical Review E 71, 2005), demonstrating that the evaporation process is quasi-static, diffusion-driven, and that thermal effects play no role. Furthermore, we show that the experimental data for the evolution of both the contact angle and the droplet mass can be collapsed onto one respective universal curve for all droplet sizes and initial contact angles.

physics.flu-dyn↗

arXiv2010

Breakup of diminutive Rayleigh jets

Discharging a liquid from a nozzle at sufficient large velocity leads to a continuous jet that due to capillary forces breaks up into droplets. Here we investigate the formation of microdroplets from the breakup of micron-sized jets with ultra high-speed imaging. The diminutive size of the jet implies a fast breakup time scale $τ_\mathrm{c} = \sqrt{ρr^3 / γ}$ of the order of 100\,ns{}, and requires imaging at 14 million frames per second. We directly compare these experiments with a numerical lubrication approximation model that incorporates inertia, surface tension, and viscosity [Eggers and Dupont, J. Fluid Mech. 262, 205 (1994); Shi, Brenner, and Nagel, Science 265, 219 (1994)]. The lubrication model allows to efficiently explore the parameter space to investigate the effect of jet velocity and liquid viscosity on the formation of satellite droplets. In the phase diagram we identify regions where the formation of satellite droplets is suppressed. We compare the shape of the droplet at pinch-off between the lubrication approximation model and a boundary integral (BI) calculation, showing deviations at the final moment of the pinch-off. Inspite of this discrepancy, the results on pinch-off times and droplet and satellite droplet velocity obtained from the lubrication approximation agree with the high-speed imaging results.

physics.flu-dyn↗

arXiv2010

The force network ensemble for granular packings

For packings of hard but not perfectly rigid particles, the length scales that govern the packing geometry and the contact forces are well separated. This separation of length scales is explored in the force network ensemble, where one studies the space of allowed force configurations for a given, frozen contact geometry. Here we review results of this approach, which yields nontrivial predictions for the effect of packing dimension and anisotropy on the contact force distribution $P(f)$, the response to overall shear and point forcing, all of which can be studied in great numerical detail. Moreover, there are emerging analytical approaches that very effectively capture, for example, the form of force distributions.

cond-mat.soft↗

arXiv2009

Approach to Universality in Axisymmetric Bubble Pinch-Off

The pinch-off of an axisymmetric air bubble surrounded by an inviscid fluid is compared in four physical realizations: (i) cavity collapse in the wake of an impacting disc, (ii) gas bubbles injected through a small orifice, (iii) bubble rupture in a straining flow, and (iv) a bubble with an initially necked shape. Our boundary-integral simulations suggest that all systems eventually follow the universal behavior characterized by slowly varying exponents predicted in [Eggers et al., PRL 98, 094502 (2007)]. However, the time scale for the onset of this final regime is found to vary by orders of magnitude depending on the system in question: while for the impacting disc it is well in the millisecond range, for the gas injection needle universal behavior sets in only a few microseconds before pinch-off. These findings reconcile the different views expressed in recent literature about the universal nature of bubble pinch-off.

physics.flu-dyn↗

arXiv2008

Maximum size of drops levitated by an air cushion

Liquid drops can be kept from touching a plane solid surface by a gas stream entering from underneath, as it is observed for water drops on a heated plate, kept aloft by a stream of water vapor. We investigate the limit of small flow rates, for which the size of the gap between the drop and the substrate becomes very small. Above a critical drop radius no stationary drops can exist, below the critical radius two solutions coexist. However, only the solution with the smaller gap width is stable, the other is unstable. We compare to experimental data and use boundary integral simulations to show that unstable drops develop a gas "chimney" which breaks the drop in its middle.

physics.flu-dyn↗

arXiv2008

A microscopic view on contact angle selection

We discuss the equilibrium condition for a liquid that partially wets a solid on the level of intermolecular forces. Using a mean field continuum description, we generalize the capillary pressure from variation of the free energy and show at what length scale the equilibrium contact angle is selected. After recovering Young's law for homogeneous substrates, it is shown how hysteresis of the contact angle can be incorporated in a self-consistent fashion. In all cases the liquid-vapor interface takes a nontrivial shape, which is compared to models using a disjoining pressure.

physics.flu-dyn↗

arXiv2007

The tail of the contact force distribution in static granular materials

We numerically study the distribution P(f) of contact forces in frictionless bead packs, by averaging over the ensemble of all possible force network configurations. We resort to umbrella sampling to resolve the asymptotic decay of P(f) for large f, and determine P(f) down to values of order 10^{-45} for ordered and disordered systems in two and three dimensions. Our findings unambiguously show that, in the ensemble approach, the force distributions decay much faster than exponentially: P(f) ~ exp(-f^α), with alpha \approx 2.0 for 2D systems, and alpha \approx 1.7 for 3D systems.

cond-mat.stat-mech↗