arXiv subjects

Jack Binysh

Publications and source records attributed to Jack Binysh.

14 recordsLinked to original sources

arXiv2026

Curved Odd Elasticity

Living materials such as membranes, cytoskeletal assemblies, cell collectives and tissues can often be described as active solids---materials that are energized from within, with elastic response about a well defined reference configuration. These materials often live in complex and curved manifolds, yet most descriptions of active solids are flat. Here, we explore the interplay between curvature and non-reciprocal elasticity via a covariant effective theory on curved manifolds in combination with numerical simulations. We find that curvature spatially patterns activity, gaps the spectrum, modifies exceptional points and introduces non-Hermitian defect modes. Together these results establish a foundation for hydrodynamic and rheological models on curved manifolds, with direct implications for living matter and active metamaterials.

cond-mat.soft↗

arXiv2026

Tuning nonlinear waves in nonreciprocal active filaments

The instabilities of slender structures power biological locomotion across scales, and offer a compelling method to actuate soft robots. Nonreciprocal elastic solids have been found to amplify flexural waves in one direction only, but design principles to tune and stabilize these waves are missing. Here we develop a geometrically exact theory of nonreciprocal filaments and provide simulations that capture their post-instability nonlinear dynamics. We find that nonreciprocity, when coupled to inertia or pre-stress, amplifies and advects curvature variations. The resulting one-way patterns of shape morphing can then be selected via dissipative interactions with the environment. Our work offers a continuum-based strategy for how internal stresses can drive active unidirectional waves without need for additional degrees of freedom.

cond-mat.soft↗

arXiv2026

More is less in unpercolated active solids

A remarkable feat of active matter physics is that systems as diverse as collections of self-propelled particles, nematics mixed with molecular motors, and interacting robots can all be described by symmetry-based continuum theories. These descriptions rely on reducing complex effects of individual motors to a few key active parameters, which increase with activity. Here we discover a striking anomaly in the continuum description of non-reciprocal active solids, a ubiquitous class of active materials. We find that as microscopic activity increases, macroscale active response can vanish: more is less. In this highly active regime, non-affine and localized modes prevail and destroy the large-scale signature of microscopic activity. These modes exist in any dilute periodic structure and emerge in random lattices below a percolation transition. Our results unveil a counterintuitive facet of active matter, offering new principles for engineering materials far from equilibrium.

cond-mat.soft↗

arXiv2026

Nonreciprocal buckling makes active filaments polyfunctional

Active filaments are a workhorse for propulsion and actuation across biology, soft robotics and mechanical metamaterials. However, artificial active rods suffer from limited robustness and adaptivity because they rely on external control, or are tethered to a substrate. Here we bypass these constraints by demonstrating that non-reciprocal interactions lead to large-scale unidirectional dynamics in free-standing slender structures. By coupling the bending modes of a buckled beam anti-symmetrically, we transform the multistable dynamics of elastic snap-through into persistent cycles of shape change. In contrast to the critical point underpinning beam buckling, this transition to self-snapping is mediated by a critical exceptional point, at which bending modes simultaneously become unstable and degenerate. Upon environmental perturbation, our active filaments exploit self-snapping for a range of functionality including crawling, digging and walking. Our work advances critical exceptional physics as a guiding principle for programming instabilities into functional active materials.

cond-mat.soft↗

arXiv2026

Geometry of the vapor layer under a Leidenfrost hydrogel sphere

A floating Leidenfrost droplet exhibits curvature inversion of its underside, due to the balance of vapor pressure and surface tension. Using interferometric imaging, we find different behavior for a levitated hydrogel sphere. Curvature inversion is observed briefly just after deposition, but quickly gives way to a steady state with no inversion. We show the essential role of vaporization on shaping the underbelly of the hydrogel, adding a new component to the interplay between vapor pressure and elastic force

physics.flu-dyn↗

arXiv2025

Wave coarsening drives time crystallization in active solids

When metals are magnetized, emulsions phase separate, or galaxies cluster, domain walls and patterns form and irremediably coarsen over time. Such coarsening is universally driven by diffusive relaxation toward equilibrium. Here, we discover an inertial counterpart - wave coarsening - in active elastic media, where vibrations emerge and spontaneously grow in wavelength, period, and amplitude, before a globally synchronized state called a time crystal forms. We observe wave coarsening in one- and two-dimensional solids and capture its dynamical scaling. We further arrest the process by breaking momentum conservation and reveal a far-from-equilibrium nonlinear analogue to chiral topological edge modes. Our work unveils the crucial role of symmetries in the formation of time crystals and opens avenues for the control of nonlinear vibrations in active materials.

cond-mat.soft↗

arXiv2024

The 2024 Motile Active Matter Roadmap

Activity and autonomous motion are fundamental aspects of many living and engineering systems. Here, the scale of biological agents covers a wide range, from nanomotors, cytoskeleton, and cells, to insects, fish, birds, and people. Inspired by biological active systems, various types of autonomous synthetic nano- and micromachines have been designed, which provide the basis for multifunctional, highly responsive, intelligent active materials. A major challenge for understanding and designing active matter is their inherent non-equilibrium nature due to persistent energy consumption, which invalidates equilibrium concepts such as free energy, detailed balance, and time-reversal symmetry. Furthermore, interactions in ensembles of active agents are often non-additive and non-reciprocal. An important aspect of biological agents is their ability to sense the environment, process this information, and adjust their motion accordingly. It is an important goal for the engineering of micro-robotic systems to achieve similar functionality. With many fundamental properties of motile active matter now reasonably well understood and under control, the ground is prepared for the study of physical aspects and mechanisms of motion in complex environments, of the behavior of systems with new physical features like chirality, of the development of novel micromachines and microbots, of the emergent collective behavior and swarming of intelligent self-propelled particles, and of particular features of microbial systems. The vast complexity of phenomena and mechanisms involved in the self-organization and dynamics of motile active matter poses major challenges, which can only be addressed by a truly interdisciplinary effort involving scientists from biology, chemistry, ecology, engineering, mathematics, and physics.

cond-mat.soft↗

arXiv2024

Twisted fibre: a photonic topological insulator

The breaking and enforcing of symmetries is a crucial ingredient in designing topologically robust materials. While magnetic fields can break time-reversal symmetry to create Chern insulators in electronic and microwave systems, at optical frequencies natural materials cannot respond to magnetic fields, which presents a challenge for the scalable exploitation of topologically enhanced devices. Here, we leverage the natural geometry of fibre to build a scalable photonic Chern insulator by twisting the fibre during fabrication. The twist inside optical fibre breaks an effective time-reversal symmetry and induces a pseudo-magnetic field, which we observe via photonic Landau levels. Unavoidably, this twist introduces a competing topology-destroying effect through a parabolic profile in the effective refractive index. Using simulations to guide experimental materials design, we discover the Goldilocks regime where the real-space Chern invariant survives, guaranteeing topological protection against fabrication-induced disorder of any symmetry class.

physics.optics↗

arXiv2023

Modeling Leidenfrost levitation of soft elastic solids

The elastic Leidenfrost effect occurs when a vaporizable soft solid is lowered onto a hot surface. Evaporative flow couples to elastic deformation, giving spontaneous bouncing or steady-state floating. The effect embodies an unexplored interplay between thermodynamics, elasticity, and lubrication: despite being observed, its basic theoretical description remains a challenge. Here, we provide a theory of elastic Leidenfrost floating. As weight increases, a rigid solid sits closer to the hot surface. By contrast, we discover an elasticity-dominated regime where the heavier the solid, the higher it floats. This geometry-governed behavior is reminiscent of the dynamics of large liquid Leidenfrost drops. We show that this elastic regime is characterized by Hertzian behavior of the solid's underbelly and derive how the float height scales with materials parameters. Introducing a dimensionless elastic Leidenfrost number, we capture the crossover between rigid and Hertzian behavior. Our results provide theoretical underpinning for recent experiments, and point to the design of novel soft machines.

cond-mat.soft↗

arXiv2021

Active elastocapillarity in soft solids with negative surface tension

Active solids consume energy to allow for actuation, shape change, and wave propagation not possible in equilibrium. Whereas active interfaces have been realized across many experimental systems, control of three-dimensional (3D) bulk materials remains a challenge. Here, we develop continuum theory and microscopic simulations that describe a 3D soft solid whose boundary experiences active surface stresses. The competition between active boundary and elastic bulk yields a broad range of previously unexplored phenomena, which are demonstrations of so-called active elastocapillarity. In contrast to thin shells and vesicles, we discover that bulk 3D elasticity controls snap-through transitions between different anisotropic shapes. These transitions meet at a critical point, allowing a universal classification via Landau theory. The active surface modifies elastic wave propagation to allow zero, or even negative, group velocities. These phenomena offer robust principles for programming shape change and functionality into active solids, from robotic metamaterials down to shape-shifting nanoparticles.

cond-mat.soft↗

arXiv2020

Geometry of Bend: Singular Lines and Defects in Twist-Bend Nematics

We describe the geometry of bend distortions in twist-bend nematic liquid crystals in terms of their fundamental degeneracies, which we call $β$ lines. These represent a new class of line-like topological defect. We use them to construct and characterise novel structures, including grain boundary and focal conic smectic-like defects, Skyrmions, and knotted merons. We analyse their local geometry and global structure, showing that their intersection with any surface is twice the Skyrmion number. Finally, we demonstrate how arbitrary knots and links can be created and describe them in terms of merons, giving a new geometric perspective on the fractionalisation of Skyrmions.

cond-mat.soft↗

arXiv2020

Three-Dimensional Active Defect Loops

We describe the flows and morphological dynamics of topological defect lines and loops in three-dimensional active nematics and show, using theory and numerical modelling, that they are governed by the local profile of the orientational order surrounding the defects. Analysing a continuous span of defect loop profiles, ranging from radial and tangential twist to wedge $\pm 1/2$ profiles, we show that the distinct geometries can drive material flow perpendicular or along the local defect loop segment, whose variation around a closed loop can lead to net loop motion, elongation or compression of shape, or buckling of the loops. We demonstrate a correlation between local curvature and the local orientational profile of the defect loop, indicating dynamic coupling between geometry and topology. To address the general formation of defect loops in three dimensions, we show their creation via bend instability from different initial elastic distortions.

cond-mat.soft↗

arXiv2018

Stable and Unstable Vortex Knots in Excitable Media

We study the dynamics of knotted vortices in a bulk excitable medium using the FitzHugh-Nagumo model. From a systematic survey of all knots of at most eight crossings we establish that the generic behaviour is of unsteady, irregular dynamics, with prolonged periods of expansion of parts of the vortex. The mechanism for the length expansion is a long-range `wave slapping' interaction, analogous to that responsible for the annihilation of small vortex rings by larger ones. We also show that there are stable vortex geometries for certain knots; in addition to the unknot, trefoil and figure eight knots reported previously, we have found stable examples of the Whitehead link and $6_2$ knot. We give a thorough characterisation of their geometry and steady state motion. For the unknot, trefoil and figure eight knots we greatly expand previous evidence that FitzHugh-Nagumo dynamics untangles initially complex geometries while preserving topology.

nlin.PS↗

arXiv2018

Maxwell's Theory of Solid Angle and the Construction of Knotted Fields

We provide a systematic description of the solid angle function as a means of constructing a knotted field for any curve or link in $\mathbb{R}^3$. This is a purely geometric construction in which all of the properties of the entire knotted field derive from the geometry of the curve, and from projective and spherical geometry. We emphasise a fundamental homotopy formula as unifying different formulae for computing the solid angle. The solid angle induces a natural framing of the curve, which we show is related to its writhe and use to characterise the local structure in a neighborhood of the knot. Finally, we discuss computational implementation of the formulae derived, with C code provided, and give illustrations for how the solid angle may be used to give explicit constructions of knotted scroll waves in excitable media and knotted director fields around disclination lines in nematic liquid crystals.

math-ph↗