arXiv subjects

Jack Hirschman

Publications and source records attributed to Jack Hirschman.

14 recordsLinked to original sources

arXiv2026

Advanced Control of Electron Beams: Tailoring X-ray Production with Programmable Laser Shaping

Leveraging the full scientific capabilities of next-generation high-repetition-rate free-electron lasers requires programmable control over electron-beam properties at their source. The photoinjector drive laser defines the electron beam's initial six-dimensional phase-space distribution, yet has historically been limited to Gaussian or static flat-top profiles, with most manipulation occurring downstream. Here we demonstrate software-programmable ultraviolet pulse shaping at the LCLS-II photoinjector as a source-level actuator that complements traditional accelerator controls. Using a coupled architecture combining dispersion-controlled nonlinear frequency conversion with spatial-light-modulator spectral shaping, we generate user-defined temporal structures and observe their imprint on electron bunches through high-resolution time-domain diagnostics. Laser-imposed multi-peaked modulation persists through acceleration, magnetic compression, and undulator transport with shot-to-shot repeatability, producing clearly resolved current structure in the compressed beam. Variance-based reconstruction from transverse deflecting cavity measurements reveals structured X-ray emission profiles exhibiting temporal features consistent with the programmed laser waveform. By providing rapid, software-controlled reconfiguration of electron-beam initial conditions, this source-level control approach establishes a programmable upstream actuator for future adaptive optimization and autonomous facility operation at high-repetition-rate light sources.

physics.acc-ph↗

arXiv2026

Physics-Guided Inverse Design of Optical Waveforms for Nonlinear Electromagnetic Dynamics

Structured optical waveforms are emerging as powerful control fields for the next generation of complex photonic and electromagnetic systems, where the temporal structure of light can determine the ultimate performance of scientific instruments. However, identifying optimal optical drive fields in strongly nonlinear regimes remains challenging because the mapping between optical inputs and system response is high-dimensional and typically accessible only through computationally expensive simulations. Here, we present a physics-guided deep learning framework for the inverse design of optical temporal waveforms. By training a light-weighted surrogate model on simulations, the method enables gradient-based synthesis of optical profiles that compensate nonlinear field distortions in driven particle-field systems. As a representative application, we apply the approach to the generation of electron beams used in advanced photon and particle sources. The learned optical waveform actively suppresses extrinsic emittance growth by more than 52% compared with conventional Gaussian operation and by approximately 9% relative to the theoretical flattop limit in simulation. We further demonstrate experimental feasibility by synthesizing the predicted waveform using a programmable pulse-shaping platform; incorporating the measured optical profile into beamline simulations yields a 31% reduction in the extrinsic emittance contribution. Beyond accelerator applications, this work establishes a general way for physics-guided inverse design of optical control fields, enabling structured light to approach fundamental performance limits in nonlinear photonic and high-frequency electromagnetic systems.

physics.optics↗

arXiv2026

Upstream Laser-based Longitudinal Enhancement of Relativistic Photoelectrons

Controlling the longitudinal phase space of high-brightness relativistic electron beams is crucial for advancing a broad spectrum of charged-particle-based instrumentation and scientific frontiers. A generalized method for achieving this control involves manipulating the photoemission laser's temporal distribution at the picosecond level, a long-standing technical challenge. Recent developments in laser shaping have enabled the creation of high-power, picosecond-scale symmetrical and asymmetrical temporal profiles, capable of fine-tuning complex space-charge dynamics and external field effects in relativistic charged-particle beams. Here, we demonstrate that rather than deviations from theorized, idealized laser distributions, a controlled asymmetry can be harnessed to counteract accelerator-induced distortions. By implementing spatiotemporal shaping of the ultraviolet photocathode laser at the LCLS-II superconducting injector, we achieve deterministic control over the longitudinal phase space without downstream corrections. We find that this optical asymmetry induces a self-linearizing effect across both low (40 pC) and high (80 pC) charge regimes, effectively suppressing nonlinear compression and energy chirp. Consequently, this approach is expected to preserve a low emittance comparable to that of ideal flattop or regular Gaussian profiles, while delivering superior current uniformity and shot-to-shot stability. These results establish spatiotemporal laser shaping as a compact, generalizable tool for directly optimizing beam brightness at the source.

physics.optics↗

arXiv2025

Structured Light at the Extreme: Harnessing Spatiotemporal Control for High-Field Laser-Matter Interactions

This review charts the emerging paradigm of intelligent structured light for high-field laser-matter interactions, where the precise spatiotemporal and vectorial control of light is a critical degree of freedom. We outline a transformative framework built upon three synergistic pillars. First, we survey the advanced electromagnetic toolkit, moving beyond conventional spatial light modulators to include robust static optics and the promising frontier of plasma light modulators. Second, we detail the optimization engine for this high-dimensional design space, focusing on physics-informed digital twins and AI-driven inverse design to automate the discovery of optimal light structures. Finally, we explore the groundbreaking applications enabled by this integrated approach, including programmable electron beams, orbital-angular-momentum-carrying {\gamma}-rays, compact THz accelerators, and robust communications. The path forward necessitates overcoming grand challenges in material science, real-time adaptive control at MHz rates, and the extension of these principles to the quantum realm. This review serves as a call to action for a coordinated, interdisciplinary effort to command, rather than merely observe, light-matter interactions at the extreme.

physics.optics↗

arXiv2025

Deep Learning Assisted Modeling for $\chi^{(2)}$ Nonlinear Optics

Modeling second-order ($\chi^{(2)}$) nonlinear optical processes remains computationally expensive due to the need to resolve fast field oscillations and simulate wave propagation using methods like the split-step Fourier method (SSFM). This can become a bottleneck in real-time applications, such as high-repetition-rate laser systems requiring rapid feedback and control. We present an LSTM-based surrogate model trained on SSFM simulations generated from a start-to-end model of the photocathode drive laser at SLAC National Accelerator Laboratory's Linac Coherent Light Source II. The model achieves over 250x speedup while maintaining high fidelity, enabling future real-time optimization and laying the foundation for data-integrated modeling frameworks and digital twins of laser systems.

physics.optics↗

arXiv2025

A Hybrid Neural Architecture: Online Attosecond X-ray Characterization

The emergence of high-repetition-rate x-ray free-electron lasers, such as SLAC's LCLS-II, serve as our canonical example for autonomous controls that necessitate high-throughput diagnostics paired with streaming computational pipelines capable of single-shot analysis with extremely low latency. We present the Deterministic Characterization with an Integrated Parallelizable Hybrid Resolver architecture, a hybrid machine learning framework designed for fast, accurate analysis of XFEL diagnostics using angular streaking-based sinogram images. This architecture integrates convolutional neural networks and bidirectional long short-term memory models to denoise input, identify x-ray sub-spike features, and extract sub-spike relative delays with sub-30 attosecond temporal resolution. Deployed on low-latency hardware, it achieves over 10~kHz throughput with \SI{168.3}{\micro\second} inference latency, indicating scalability to 14~kHz with FPGA integration. By transforming regression tasks into classification problems and leveraging optimized error encoding, we achieve high precision with low-latency performance that is critical for real-time streaming event selection and experimental control feedback signals. This represents a key development in real-time control pipelines for next-generation autonomous science, generally, and high repetition-rate x-ray experiments in particular.

physics.app-ph↗

arXiv2024

Nonlinear Shaping in the Picosecond Gap

Lightwave pulse shaping in the picosecond regime has remained unaddressed because it resides beyond the limits of state-of-the-art techniques, either due to its inherently narrow spectral content or fundamental speed limitations in electronic devices. The so-called picosecond shaping gap hampers progress in all areas correlated with time-modulated light-matter interactions, such as photoelectronics, health and medical technologies, and energy and material sciences. We report on a novel nonlinear method to simultaneously frequency-convert and adaptably shape the envelope of light wavepackets in the picosecond regime by balancing spectral engineering and nonlinear conversion in solid-state nonlinear media, without requiring active devices. We capture computationally the versatility of this methodology across a diverse set of nonlinear conversion chains and initial conditions. We also provide experimental evidence of this framework producing picosecond-shaped, ultra-narrowband, near-transform limited light pulses from broadband, femtosecond input pulses, paving the way toward programmable lightwave shaping at GHz-to-THz frequencies.

physics.optics↗

arXiv2024

The LCLS-II Photoinjector Laser Infrastructure

This paper presents a comprehensive technical overview of the Linac Coherent Light Source II (LCLS-II) photoinjector laser system, its first and foremost component. The LCLS-II photoinjector laser system serves as an upgrade to the original LCLS at SLAC National Accelerator Laboratory. This advanced laser system generates high-quality laser beams for LCLS-II, contributing to the instrument's unprecedented brightness, precision, and flexibility. Our discussion extends to the various subsystems that comprise the photoinjector, including the photocathode laser, laser heater, and beam transport systems. Lastly, we draw attention to the ongoing research and development infrastructure underway to enhance the functionality and efficiency of the LCLS-II, and similar X-ray free-electron laser facilities around the world, thereby contributing to the future of laser technology and its applications.

physics.acc-ph↗

arXiv2024

Optimizing Spectral Phase Transfer in Four-Wave Mixing with Gas-filled Capillaries: A Trade-off Study

Four-wave mixing (FWM) in gas-filled hollow-core capillaries, a nonlinear optical process that mixes signal and pump photon frequencies to generate idler frequency photons, offers a method for precise spectral phase transfer from signal to idler at ultrashort timescales and extreme powers. However, this regime is challenged by competing linear and nonlinear dynamics, leading to significant trade-offs between spectral phase transfer and conversion efficiency. Our computational investigation focuses on upconversion of femtosecond pulses from the infrared (IR) to the ultraviolet (UV), a range notoriously difficult to manipulate. We explore an intermediate energy regime that strikes an optimal balance between FWM-mediated phase-transfer fidelity and nonlinear conversion efficiency. By adjusting the energy ratios and spectral phase profiles of the input signal, we achieve conversion efficiencies of approximately 5%-15% while maintaining an effectively quasi-linear spectral phase transfer. These findings contribute to establishing first-principles and scaling laws essential for applications such as high-precision imaging, spectroscopy, quantum transduction, and distributed entangled interconnects, facilitating advanced control of ultrafast photonic and electronic wavepackets in quantum materials with unprecedented spatial and temporal precision.

physics.optics↗

arXiv2023

Design, Optimization, and Blackbox Optimization of Laser Systems

Chirped pulse amplification (CPA) and subsequent nonlinear optical (NLO) systems constitute the backbone of myriad advancements in semiconductor and additive manufacturing, communication networks, biology and medicine, defense and national security, and a host of other sectors over the past decades. Accurately and efficiently modeling CPA and NLO-based laser systems is challenging because of the multitude of coupled linear and nonlinear processes and high variability in simulation frameworks. The lack of fully-integrated models severely hampers further advances in tailoring existing or materializing new CPA+NLO systems. Such tools are the key to enabling emerging optimization and inverse design approaches reliant on data-driven machine learning methods. Here, we present a modular start-to-end software model encompassing an array of amplifier designs and nonlinear optics techniques. The simulator renders time- and frequency-resolved electromagnetic fields alongside essential physical characteristics of energy, fluence, and spectral distribution. To demonstrate its robustness and real-world applicability -- specifically, reverse engineering, system optimization, and inverse design -- we present a case study on the LCLS-II photo-injector laser, representative of a high-power and spectro-temporally non-trivial CPA+NLO system.

physics.optics↗

arXiv2022

At-the-edge Data Processing for Low Latency High Throughput Machine Learning Algorithms

High throughput and low latency data processing is essential for systems requiring live decision making, control, and machine learning-optimized data reduction. We focus on two distinct use cases for in-flight streaming data processing for a) X-ray pulse reconstruction at SLAC's LCLS-II Free-Electron Laser and b) control diagnostics at the DIII-D tokamak fusion reactor. Both cases exemplify high throughput and low latency control feedback and motivate our focus on machine learning at the edge where data processing and machine learning algorithms can be implemented in field programmable gate array based hardware immediately after the diagnostic sensors. We present our recent work on a data preprocessing chain which requires fast featurization for information encoding. We discuss several options for such algorithms with the primary focus on our discrete cosine and sine transform-based approach adapted for streaming data. These algorithms are primarily aimed at implementation in field programmable gate arrays, favoring linear algebra operations that are also aligned with the recent advances in inference accelerators for the computational edge.

physics.ins-det↗

arXiv2020

Tiny-box: A tool for the versatile development and characterization of low noise fast X-ray imaging detectors

X-ray Charge Coupled Devices (CCDs) have been the workhorse for soft X-ray astronomical instruments for the past quarter century. They provide broad energy response, extremely low electronic read noise, and good energy resolution in soft X-rays. These properties, along with the large arrays and small pixel sizes available with modern-day CCDs, make them a potential candidate for next generation astronomical X-ray missions equipped with large collecting areas, high angular resolutions and wide fields of view, enabling observation of the faint, diffuse and high redshift X-ray universe. However, such high collecting area (about 30 times Chandra) requires these detectors to have an order of magnitude faster readout than current CCDs to avoid saturation and pile up effects. In this context, Stanford University and MIT have initiated the development of fast readout X-ray cameras. As a tool for this development, we have designed a fast readout, low noise electronics board (intended to work at a 5 Megapixel per second data rate) coupled with an STA Archon controller to readout a 512 x 512 CCD (from MIT Lincoln Laboratory). This versatile setup allows us to study a number of parameters and operation conditions including the option for digital shaping. In this paper, we describe the characterization test stand, the concept and development of the readout electronics, and simulation results. We also report the first measurements of read noise, energy resolution and other parameters from this set up. While this is very much a prototype, we plan to use larger, multi-node CCD devices in the future with dedicated ASIC readout systems to enable faster, parallel readout of the CCDs.

astro-ph.IM↗

arXiv2020

Long-term Hybrid Stabilization of the Carrier-Envelope Phase

Controlling the carrier envelope phase (CEP) in mode-locked lasers over practically long timescales is crucial for real-world applications in ultrafast optics and precision metrology. We present a hybrid solution that combines a feed-forward technique to stabilize the phase offset in fast timescales and a feedback technique that addresses slowly varying sources of interference and locking bandwidth limitations associated with gain media with long upper-state lifetimes. We experimentally realize the hybrid stabilization system in an Er:Yb:glass mode-locked laser and demonstrate 75 hours of stabilization with integrated phase noise of 14 mrad (1 Hz to 3 MHz), corresponding to around 11 as of carrier to envelope jitter. Additionally, we examine the impact of environmental factors, such as humidity and pressure, on the long-term stability and performance of the system.

physics.optics↗

arXiv2020

Timing Detectors with SiPM read-out for the MUSE Experiment at PSI

The Muon Scattering Experiment at the Paul Scherrer Institut uses a mixed beam of electrons, muons, and pions, necessitating precise timing to identify the beam particles and reactions they cause. We describe the design and performance of three timing detectors using plastic scintillator read out with silicon photomultipliers that have been built for the experiment. The Beam Hodoscope, upstream of the scattering target, counts the beam flux and precisely times beam particles both to identify species and provide a starting time for time-of-flight measurements. The Beam Monitor, downstream of the scattering target, counts the unscattered beam flux, helps identify background in scattering events, and precisely times beam particles for time-of-flight measurements. The Beam Focus Monitor, mounted on the target ladder under the liquid hydrogen target inside the target vacuum chamber, is used in dedicated runs to sample the beam spot at three points near the target center, where the beam should be focused.

physics.ins-det↗