arXiv subjects

Jacob Pember

Publications and source records attributed to Jacob Pember.

5 recordsLinked to original sources

arXiv2026

The Calibration System of the iLocater Spectrograph

iLocater is a new near-infrared, extreme precision radial velocity (EPRV) instrument delivered to the Large Binocular Telescope in the summer of 2026. The instrument utilizes single-mode fibers (SMFs) for light transmission, including its calibration systems. We present an overview of the iLocater calibration system, detailing the specific sources and the hardware required to inject calibration light into the SMFs. Furthermore, we discuss the hardware that efficiently switches between these sources and distributes the light to all necessary instrument locations, entirely eliminating the need for free-space propagation.

astro-ph.IM↗

arXiv2026

Commissioning and on-sky performance verification of iLocater

iLocater is a high-resolution near-infrared extreme precision radial velocity (EPRV) spectrograph that was deployed to the Large Binocular Telescope (LBT) in June 2026. iLocater operates over $\lambda=966-1312$ nm with a median resolving power of $R=205,000$ as measured in the laboratory. We present the commissioning and initial on-sky verification program using solar and night-time observations at the LBT. First light was achieved on 27 June 2026, and nearly 150 on-sky spectra have now been recorded. Observations include single stars ranging in spectral type from B5 to M6. iLocater uses the LBT AO system, and we have demonstrated its ability to obtain spatially resolved spectra of close ($\theta < 1''$) binary stars.

astro-ph.IM↗

arXiv2026

Laboratory characterization of iLocater

iLocater is a diffraction-limited, fiber-fed spectrograph designed for the Large Binocular Telescope (LBT), which targets high-precision radial velocity measurements in the near-infrared. Prior to deployment, comprehensive laboratory characterization was essential to validate instrument performance and inform alignment strategies. This paper presents results from four key areas of lab characterization: (1) adjustment and optimization of detector orientation to optimize spectrum alignment with the detector pixel grid across the focal plane; (2) the design and installation of a LED illumination source to enable high-fidelity flat-fields; (3) a model-based focusing methodology using OpticStudio image simulations to optimize the optical alignment of the spectrograph; and (4) assessment of instrument mechanical and optical stability under laboratory conditions. Together, these efforts established baseline performance metrics and demonstrated instrument readiness for delivery and on-sky commissioning.

astro-ph.IM↗

arXiv2020

Fiber modal noise mitigation by a rotating double scrambler

Fiber modal noise is a performance limiting factor in high-resolution spectroscopy, both with respect to achieving high signal-to-noise ratios or when targeting high-precision radial velocity measurements, with multi-mode fiber-fed high-resolution spectrographs. Traditionally, modal noise is reduced by agitating or "shaking" the fiber. This way, the light propagating in the fiber is redistributed over many different modes. However, in case of fibers with only a limited number of modes, e.g. at near-infrared wavelengths or in adaptive-optics assisted systems, this method becomes very inefficient. The strong agitation that would be needed stresses the fiber and could lead to focal ratio degradation, or worse, to damaging the fiber. As an alternative approach, we propose to make use of a classic optical double scrambler, a device that is already implemented in many high-precision radial-velocity spectrographs, to mitigate the effect of modal noise by rotating the scrambler's first fiber end during each exposure. Because of the rotating illumination pattern of the scrambler's second fiber, the modes that are excited vary continuously. This leads to very efficient averaging of the modal pattern at the fiber exit and to a strong reduction of modal noise. In this contribution, we present a prototype design and preliminary laboratory results of the rotating double scrambler.

astro-ph.IM↗

arXiv2020

MARVEL, a four-telescope array for high-precision radial-velocity monitoring

Since the first discovery of a planet outside of our Solar System in 1995, exoplanet research has shifted from detecting to characterizing worlds around other stars. The TESS (NASA, launched 2019) and PLATO mission (ESA, planned launch 2026) will find and constrain the size of thousands of exoplanets around bright stars all over the sky. Radial velocity measurements are needed to characterize the orbit and mass, and complete the picture of densities and composition of the exoplanet systems found. The Ariel mission (ESA, planned launch 2028) will characterize exoplanet atmospheres with infrared spectroscopy. Characterization of stellar activity using optical spectroscopy from the ground is key to retrieve the spectral footprint of the planetary atmosphere in Ariel's spectra. To enable the scientific harvest of the TESS, PLATO and Ariel space missions, we plan to install MARVEL as an extension of the existing Mercator Telescope at the Roque De Los Muchachos Observatory on La Palma (SPAIN). MARVEL consists of an array of four 80 cm telescopes linked through optical fibers to a single high-resolution echelle spectrograph, optimized for extreme-precision radial velocity measurements. It can observe the radial velocities of four different stars simultaneously or, alternatively, combine the flux from four telescopes pointing to a single faint target in one spectrum. MARVEL is constructed by a KU Leuven (Belgium) led collaboration, with contributions from the UK, Austria, Australia, Sweden, Denmark and Spain. In this paper, we present the MARVEL instrument with special focus on the optical design and expected performance of the spectrograph, and report on the status of the project.

astro-ph.IM↗