arXiv subjects

Jacopo Catani

Publications and source records attributed to Jacopo Catani.

13 recordsLinked to original sources

arXiv2025

Single Sr Atoms in Optical Tweezer Arrays for Quantum Simulation

We report on the realization of a platform for trapping and manipulating individual $^{88}$Sr atoms in optical tweezers. A first cooling stage based on a blue shielded magneto-optical trap (MOT) operating on the $^1S_0$ -> $^1P_1$ transition at 461 nm enables us to trap approximately $4\times 10^6$ atoms at a temperature of 6.8 mK. Further cooling is achieved in a narrow-line red MOT using the $^1S_0$ -> $^3P_1$ intercombination transition at 689 nm, bringing $4\times 10^5$ atoms down to 5 $\mu$K and reaching a density of $\approx 10^{10}$ cm$^{-3}$. Atoms are then loaded into 813 nm tweezer arrays generated by crossed acousto-optic deflectors and tightly focused onto the atoms with a high-numerical-aperture objective. Through light-assisted collision processes we achieve the collisional blockade, which leads to single-atom occupancy with a probability of about $50\%$. The trapped atoms are detected via fluorescence imaging with a fidelity of $99.986(6)\%$, while maintaining a survival probability of $97(2)\%$. The release-and-recapture measurement provides a temperature of $12.92(5)$ $\mu$K for the atoms in the tweezers, and the ultra-high-vacuum environment ensures a vacuum lifetime higher than 7 min. These results demonstrate a robust alkaline-earth tweezer platform that combines efficient loading, cooling, and high-fidelity detection, providing the essential building blocks for scalable quantum simulation and quantum information processing with Sr atoms.

physics.atom-ph↗

arXiv2024

Certification Grade Quantum Dot Luminescent Solar Concentrator Glazing with Optical Communication Capability for Connected Sustainable Architecture

Energy sustainability and interconnectivity are the two main pillars on which cutting-edge architecture is based and require the realisation of energy and intelligent devices that can be fully integrated into buildings, capable of meeting stringent regulatory requirements and operating in real-world conditions. Luminescent solar concentrators, particularly those based on near-infrared emitting reabsorption-free quantum dots, are considered good candidates for the realisation of semi-transparent photovoltaic glazing, but despite important advances in optical property engineering strategies, studies of finished devices suitable for real-world operation are still lacking. In this paper, we demonstrate the first example of a fully assembled quantum dot luminescent solar concentrator-based photovoltaic glazing that meets all international standards for photovoltaic and building elements. We also show that these devices are capable of functioning as efficient Visible Light Communication (VLC) receivers even under full sunlight, thus combining energy and wireless connectivity functions in a realistic solution for smart, sustainable buildings.

cond-mat.mtrl-sci↗

arXiv2023

IEEE 802.15.7-Compliant Ultra-low Latency Relaying VLC System for Safety-Critical ITS

The integration of Visible-Light Communications technology (VLC) in Intelligent Transportation Systems (ITS) is a very promising platform for a cost-effective implementation of revolutionary ITS and cooperative ITS protocols. In this paper, we propose an infrastructure-to-vehicle-to-vehicle (I2V2V) VLC system for ITS, implementing it through a regular LED traffic light serving as a transmitter and a digital Active Decode-and-Relay (ADR) stage for decoding and relaying the received information towards further incoming units. The proposed VLC system targets the challenging and important case of ultra-low latency ADR transmission of short packets, as this is needed for emerging applications of automatic braking, car platooning and other critical automatic and/or assisted driving applications. The experimental validation of the ADR VLC chain, as well as a thorough statistical analysis of errors distribution in the transmission, has been performed for short to medium distances, up to 50 meters. The performances of the designed system are evaluated by measuring the packet error rate (PER) and latency in the whole ADR transmission chain. Our analysis shows that our system attains ultra-low, sub-ms latencies at 99.9\% confidence level for PER as high as $5\times10^{-3}$, yet granting a latency below 10 ms even for distances of 50 m. The demonstrated system prototype is compatible with IEEE 802.15.7 standard.

eess.SP↗

arXiv2022

Characterization of noise regimes in Mid-IR free-space optical communication based on quantum cascade lasers

The recent development of Quantum Cascade Lasers (QCLs) represents one of the biggest opportunities for the deployment of a new class of Free Space Optical (FSO) communication systems working in the mid-infrared (Mid-IR) wavelength range. As compared to more common FSO systems exploiting the telecom range, the larger wavelength employed in Mid-IR systems delivers exceptional benefits in case of adverse atmospheric conditions, as the reduced scattering rate strongly suppresses detrimental effects on the FSO link length given by the presence of rain, dust, fog and haze. In this work, we use a novel FSO testbed operating at \SI{4.7}{\micro m}, to provide a detailed experimental analysis of noise regimes that could occur in realistic FSO Mid-IR systems based on QCLs. Our analysis reveals the existence of two distinct noise regions, corresponding to different realistic channel attenuation conditions, which are precisely controlled in our setup. To relate our results with real outdoor configurations, we combine experimental data with predictions of an atmospheric channel loss model, finding that error-free communication could be attained for effective distances up to 8~km in low visibility conditions of 1 km. Our analysis of noise regimes may have a key relevance for the development of novel, long-range FSO communication systems based on Mid-IR QCL sources

eess.SP↗

arXiv2021

A New Remote Monitor and Control System Based on Sigfox IoT Network

We describe a new, low-cost system designed to provide multi-sensor remote condition monitoring of modern scientific laboratories, as well as to allow users to perform actions from remote locations in case of detection of specified events. The system is battery operated and does not require the presence of a Local Area Network (LAN) or WiFi (which are typically not available in case of, e.g. power losses), as it exploits the growing infrastructure of Internet of Things (IoT) Low Power Wide Area Networks (LPWAN). In particular our system exploits the new SigFox ultra-narrow-bandwidth (UNB) infrastructure, and provides for a bidirectional link between the instrumentation and the remote user even in case of power line outages, which are among the most critical situations that a scientific laboratory can withstand. The system can detect the occurrence of predefined events in very short times, and either autonomously react with a series of predefined actions, also allowing a remote user to timely perform additional actions on the system through an user-friendly smartphone application or via a browser interface. The system also embeds a novel power-loss detection architecture, which detects power line failures in less than 2 ms. We provide a full characterization of the prototype, including reaction times, connection latencies, sensors sensitivity, and power consumption.

cs.NI↗

arXiv2021

Flavour-selective localization in interacting lattice fermions via SU(N) symmetry breaking

A large repulsion between particles in a quantum system can lead to their localization, as it happens for the electrons in Mott insulating materials. This paradigm has recently branched out into a new quantum state, the orbital-selective Mott insulator, where electrons in some orbitals are predicted to localize, while others remain itinerant. We provide a direct experimental realization of this phenomenon, that we extend to a more general flavour-selective localization. By using an atom-based quantum simulator, we engineer SU(3) Fermi-Hubbard models breaking their symmetry via a tunable coupling between flavours, observing an enhancement of localization and the emergence of flavour-dependent correlations. Our realization of flavour-selective Mott physics opens the path to the quantum simulation of multicomponent materials, from superconductors to topological insulators.

cond-mat.quant-gas↗

arXiv2020

Experimental measurements of a joint 5G-VLC communication for future vehicular networks

One of the main revolutionary features of 5G networks is the ultra-low latency that will enable new services such as those for the future smart vehicles. The 5G technology will be able to support extreme-low latency. Thanks to new technologies and the wide flexible architecture that integrates new spectra and access technologies. In particular, Visible Light Communication (VLC) is envisaged as a very promising technology for vehicular communications, since the information can flow by using the lights (as traffic-lights and car lights). This paper describes one of the first experiments on the joint use of 5G and VLC networks to provide real-time information to cars. The applications span from road safety to emergency alarm.

eess.SP↗

arXiv2020

Measurement-based VLC channel characterization for I2V communications in a real urban scenario

Visible light communication (VLC) is nowadays envisaged as a promising technology to enable new classes of services in intelligent transportation systems ranging, e.g., from assisted driving to autonomous vehicles. The assessment of the performance of VLC for automotive applications requires as a basic step a model of the transmission pattern and propagation of the VLC signal when real traffic-lights and road scenarios are involved. In this paper an experimental measurement campaign has been carried out by using a regular traffic-light as source (red light) and a photoreceiver positioned, statically, at different distances and heights along the road. A linear regression technique is used to come up with different propagation models. The proposed models have been compared, in terms of accuracy and complexity, to the conventional Lambertian model to describe the VLC channel in a real urban scenario. The proposed models provides a significant higher accuracy with comparable complexity.

eess.SP↗

arXiv2019

Observation of a dipolar quantum gas with metastable supersolid properties

The competition of dipole-dipole and contact interactions leads to exciting new physics in dipolar gases, well-illustrated by the recent observation of quantum droplets and rotons in dipolar condensates. We show that the combination of the roton instability and quantum stabilization leads under proper conditions to a novel regime that presents supersolid properties, due to the coexistence of stripe modulation and phase coherence. In a combined experimental and theoretical analysis, we determine the parameter regime for the formation of coherent stripes, whose lifetime of a few tens of milliseconds is limited by the eventual destruction of the stripe pattern due to three-body losses. Our results open intriguing prospects for the development of long-lived dipolar supersolids.

cond-mat.quant-gas↗

arXiv2015

A compact ultranarrow high-power laser system for experiments with 578nm Ytterbium clock transition

In this paper we present the realization of a compact, high-power laser system able to excite the Ytterbium clock transition at 578 nm. Starting from an external-cavity laser based on a quantum dot chip at 1156 nm with an intra-cavity electro-optic modulator, we were able to obtain up to 60 mW of visible light at 578 nm via frequency doubling. The laser is locked with a 500 kHz bandwidth to a ultra-low-expansion glass cavity stabilized at its zero coefficient of thermal expansion temperature through an original thermal insulation and correction system. This laser allowed the observation of the clock transition in fermionic $^{173}$Yb with a < 50 Hz linewidth over 5 minutes, limited only by a residual frequency drift of some 0.1 Hz/s.

physics.optics↗

arXiv2015

Direct observation of coherent inter-orbital spin-exchange dynamics

We report on the first direct observation of fast spin-exchange coherent oscillations between different long-lived electronic orbitals of ultracold $^{173}$Yb fermions. We measure, in a model-independent way, the strength of the exchange interaction driving this coherent process. This observation allows us to retrieve important information on the inter-orbital collisional properties of $^{173}$Yb atoms and paves the way to novel quantum simulations of paradigmatic models of two-orbital quantum magnetism.

cond-mat.quant-gas↗

arXiv2014

A one-dimensional liquid of fermions with tunable spin

Correlations in systems with spin degree of freedom are at the heart of fundamental phenomena, ranging from magnetism to superconductivity. The effects of correlations depend strongly on dimensionality, a striking example being one-dimensional (1D) electronic systems, extensively studied theoretically over the past fifty years. However, the experimental investigation of the role of spin multiplicity in 1D fermions - and especially for more than two spin components - is still lacking. Here we report on the realization of 1D, strongly-correlated liquids of ultracold fermions interacting repulsively within SU(N) symmetry, with a tunable number N of spin components. We observe that static and dynamic properties of the system deviate from those of ideal fermions and, for N>2, from those of a spin-1/2 Luttinger liquid. In the large-N limit, the system exhibits properties of a bosonic spinless liquid. Our results provide a testing ground for many-body theories and may lead to the observation of fundamental 1D effects.

cond-mat.quant-gas↗

arXiv2014

Efficient Frequency Doubling at 399 nm

This article describes a high-power and narrow-linewidth laser source at 399 nm useful for cooling and trapping of ytterbium atoms. A continuous-wave titanium-sapphire laser at 798 nm is frequency doubled using a lithium triborate crystal in an enhancement cavity. Up to 1.0 W of light at 399 nm has been obtained from 1.3 W of infrared light, with an efficiency of 80 % This paper was published in Applied Optics and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: http://www.opticsinfobase.org/ao/abstract.cfm?uri=ao-53-16-3388. Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law.

physics.optics↗