arXiv subjects

Jad C. Halimeh

Publications and source records attributed to Jad C. Halimeh.

138 records · Page 8Linked to original sources

arXiv2016

Spin structure factors of chiral quantum spin liquids on the kagome lattice

We calculate dynamical spin structure factors for gapped chiral spin liquid states in the spin-1/2 Heisenberg antiferromagnet on the kagome lattice using Schwinger-boson mean-field theory. In contrast to static (equal-time) structure factors, the dynamical structure factor shows clear signatures of time-reversal symmetry breaking for chiral spin liquid states. In particular, momentum inversion $\bm{k} \to -\bm{k}$ symmetry as well as the six-fold rotation symmetry around the $Γ$-point are lost. We highlight other interesting features, such as a relatively flat onset of the two-spinon continuum for the \emph{cuboc1} state. Our work is based on the projective symmetry group classification of time-reversal symmetry breaking Schwinger-boson mean-field states by Messio, Lhuillier, and Misguich.

cond-mat.str-el↗

arXiv2016

A weak-coupling master equation for arbitrary initial conditions

The structure of the initial system-environment state is fundamental to determining the nature and characteristics of the evolution of such an open quantum system. The usual assumption is to consider that the initial system-environment state is separable. Here, we go beyond this simple case and derive the evolution equations, up to second order in a weak-coupling expansion, that describe the evolution of the reduced density matrix of the system for any arbitrary system-environment initial state. The structure of these equations allows us to determine the initial conditions for which a Lindblad form can be recovered once applying the Markov and secular approximations.

quant-ph↗

arXiv2016

Fresnel-Fizeau drag: Invisibility conditions for all inertial observers

It was recently shown [Halimeh et al. arXiv:1510.06144 (to appear in Phys. Rev. A)] that as a result of the Doppler effect, inherently dispersive single-frequency ideal free-space invisibility cloaks in relative motion to an observer can only cloak light whose frequency in the cloak frame coincides with the operational frequency of the cloak, although an infinite number of such rays exist for any cloak motion. In this article, we show analytically and through ray-tracing simulations that even though this relationship can be relaxed by simplifying the ideal invisibility cloak into a broadband amplitude cloak, Fresnel-Fizeau drag uncloaks the phase of light in the inertial frame of the cloak thereby compromising its amplitude cloaking in all other inertial frames. In other words, only an invisibility device that perfectly cloaks both the amplitude and the phase of light in its own inertial frame will also (perfectly) cloak this light in any other inertial frame. The same conclusion lends itself to invisible objects that are not cloaks, such as the invisible sphere.

physics.optics↗

arXiv2016

Invisibility cloaks in relativistic motion

We consider an ideal invisibility cloak which is illuminated by monochromatic light and which moves in vacuum at constant relativistic velocity with respect to the common inertial frame of light source and observer. We show that, in general, the moving cloak becomes detectable by image distortions and by generating a broad frequency spectrum of the scattered light. However, for many special combinations of incident light frequency, wave vector of light, and cloak velocity, ideal cloaking remains possible. It becomes non-reciprocal though. This means that light rays emitted by the light source arrive at the observer as though they have travelled through vacuum, but they take completely different paths after being retro-reflected at the observer position.

physics.optics↗

arXiv2015

Chebyshev matrix product state approach for time evolution

We present and test a new algorithm for time-evolving quantum many-body systems initially proposed by Holzner et al. [Phys. Rev. B 83, 195115 (2011)]. The approach is based on merging the matrix product state (MPS) formalism with the method of expanding the time-evolution operator in Chebyshev polynomials. We calculate time-dependent observables of a system of hardcore bosons quenched under the Bose-Hubbard Hamiltonian on a one-dimensional lattice. We compare the new algorithm to more standard methods using the MPS architecture. We find that the Chebyshev method gives numerically exact results for small times. However, the reachable times are smaller than the ones obtained with the other state-of-the-art methods. We further extend the new method using a spectral-decomposition-based projective scheme that utilizes an effective bandwidth significantly smaller than the full bandwidth, leading to longer evolution times than the non-projective method and more efficient information storage, data compression, and less computational effort.

cond-mat.str-el↗

arXiv2014

Domain-wall melting in ultracold boson systems with holes and spin-flip defects

Quantum magnetism is a fundamental phenomenon of nature. As of late, it has garnered a lot of interest because experiments with ultracold atomic gases in optical lattices could be used as a simulator for phenomena of magnetic systems. A paradigmatic example is the time evolution of a domain-wall state of a spin-1/2 Heisenberg chain, the so-called domain-wall melting. The model can be implemented by having two species of bosonic atoms with unity filling and strong on-site repulsion U in an optical lattice. In this paper, we study the domain-wall melting in such a setup on the basis of the time-dependent density matrix renormalization group (tDMRG). We are particularly interested in the effects of defects that originate from an imperfect preparation of the initial state. Typical defects are holes (empty sites) and flipped spins. We show that the dominating effects of holes on observables like the spatially resolved magnetization can be taken account of by a linear combination of spatially shifted observables from the clean case. For sufficiently large U, further effects due to holes become negligible. In contrast, the effects of spin flips are more severe as their dynamics occur on the same time scale as that of the domain-wall melting itself. It is hence advisable to avoid preparation schemes that are based on spin-flips.

quant-ph↗

arXiv2013

Photorealistic rendering of unidirectional free-space invisibility cloaks

Carpet or ground-plane invisibility cloaks hide an object in reflection and inhibit transmission by construction. This concept has significantly reduced the otherwise demanding material requirements and has hence enabled various experimental demonstrations. In contrast, free-space invisibility cloaks should work in both reflection and transmission. The fabrication of omnidirectional three-dimensional free-space cloaks still poses significant challenges. Recently, the idea of the carpet cloak has been carried over to experiments on unidirectional free-space invisibility cloaks that only work perfectly for one particular viewing direction and, depending on the design, also for one linear polarization of light only. Here, by using photorealistic ray tracing, we visualize the performance of four types of such unidirectional cloaks in three dimensions for different viewing directions and different polarizations of light, revealing virtues and limitations of these approaches in an intuitive manner.

physics.optics↗

arXiv2012

Fractional Excitations in Cold Atomic Gases

We study the behavior of excitations in the tilted one-dimensional Bose-Hubbard model. In the phase with broken symmetry, fundamental excitations are domain-walls which show fractional statistics. Using perturbation theory, we derive an analytic model for the time evolution of these fractional excitations, and demonstrate the existence of a repulsively bound state above a critical center of mass momentum. The validity of the perturbative analysis is confirmed by the use of t- DMRG simulations. These findings open the path for experimental detection of fractional particles in cold atomic gases.

cond-mat.quant-gas↗

arXiv2012

Photorealistic ray tracing of free-space invisibility cloaks made of uniaxial dielectrics

The design rules of transformation optics generally lead to spatially inhomogeneous and anisotropic impedance-matched magneto-dielectric material distributions for, e.g., free-space invisibility cloaks. Recently, simplified anisotropic non-magnetic free-space cloaks made of a locally uniaxial dielectric material (calcite) have been realized experimentally. In a two-dimensional setting and for in-plane polarized light propagating in this plane, the cloaking performance can still be perfect for light rays. However, for general views in three dimensions, various imperfections are expected. In this paper, we study two different purely dielectric uniaxial cylindrical free-space cloaks. For one, the optic axis is along the radial direction, for the other one it is along the azimuthal direction. The azimuthal uniaxial cloak has not been suggested previously to the best of our knowledge. We visualize the cloaking performance of both by calculating photorealistic images rendered by ray tracing. Following and complementing our previous ray-tracing work, we use an equation of motion directly derived from Fermats principle. The rendered images generally exhibit significant imperfections. This includes the obvious fact that cloaking does not work at all for horizontal or for ordinary linear polarization of light. Moreover, more subtle effects occur such as viewing-angle-dependent aberrations. However, we still find amazingly good cloaking performance for the purely dielectric azimuthal uniaxial cloak.

physics.optics↗

arXiv2011

Time-of-flight imaging of invisibility cloaks

As invisibility cloaking has recently become experimental reality, it is interesting to explore ways to reveal remaining imperfections. In essence, the idea of most invisibility cloaks is to recover the optical path lengths without an object (to be made invisible) by a suitable arrangement around that object. Optical path length is proportional to the time of flight of a light ray or to the optical phase accumulated by a light wave. Thus, time-of-flight images provide a direct and intuitive tool for probing imperfections. Indeed, recent phase-sensitive experiments on the carpet cloak have already made early steps in this direction. In the macroscopic world, time-of-flight images could be measured directly by light detection and ranging (LIDAR). Here, we show calculated time-of-flight images of the conformal Gaussian carpet cloak, the conformal grating cloak, the cylindrical free-space cloak, and of the invisible sphere. All results are obtained by using a ray-velocity equation of motion derived from Fermat's principle.

physics.optics↗

arXiv2010

Newtonian photorealistic ray tracing of grating cloaks and correlation-function-based cloaking-quality assessment

Grating cloaks are a variation of dielectric carpet (or ground- plane) cloaks. The latter were introduced by Li and Pendry. In contrast to the numerical work involved in the quasi-conformal carpet cloak, the refractive-index profile of a conformal grating cloak follows a closed and exact analytical form. We have previously mentioned that finite-size conformal grating cloaks may exhibit better cloaking than usual finite-size carpet cloaks. In this letter, we directly visualize their performance using photorealistic ray-tracing simulations. We employ a Newtonian approach that is advantageous compared to conventional ray tracing based on Snell's law. Furthermore, we quantify the achieved cloaking quality by computing the cross-correlations of rendered images. The cross-correlations for the grating cloak are much closer to 100% (i.e., ideal) than those for the Gaussian carpet cloak.

physics.optics↗

arXiv2010

Conformal carpet and grating cloaks

We introduce a class of conformal versions of the previously introduced quasi-conformal carpet cloak, and show how to construct such conformal cloaks for different cloak shapes. Our method provides exact refractive-index profiles in closed mathematical form for the usual carpet cloak as well as for other shapes. By analyzing their asymptotic behavior, we find that the performance of finite-size cloaks becomes much better for metal shapes with zero average value, e.g., for gratings.

physics.optics↗