arXiv subjects

Jad Salman

Publications and source records attributed to Jad Salman.

At least 19 recordsLinked to original sources

arXiv2024

Giant Modulation of Refractive Index from Picoscale Atomic Displacements

Structural disorder has been shown to enhance and modulate magnetic, electrical, dipolar, electrochemical, and mechanical properties of materials. However, the possibility of obtaining novel optical and optoelectronic properties from structural disorder remains an open question. Here, we show unambiguous evidence of disorder in the form of anisotropic, picoscale atomic displacements modulating the refractive index tensor and resulting in the giant optical anisotropy observed in BaTiS$_3$, a quasi-one-dimensional hexagonal chalcogenide. Single crystal X-ray diffraction studies reveal the presence of antipolar displacements of Ti atoms within adjacent TiS$_6$ chains along the c-axis, and three-fold degenerate Ti displacements in the a-b plane. $^{47/49}$Ti solid-state NMR provides additional evidence for those Ti displacements in the form of a three-horned NMR lineshape resulting from a low symmetry local environment around Ti atoms. We used scanning transmission electron microscopy to directly observe the globally disordered Ti a-b plane displacements and find them to be ordered locally over a few unit cells. First-principles calculations show that the Ti a-b plane displacements selectively reduce the refractive index along the ab-plane, while having minimal impact on the refractive index along the chain direction, thus resulting in a giant enhancement in the optical anisotropy. By showing a strong connection between structural disorder with picoscale displacements and the optical response in BaTiS$_3$, this study opens a pathway for designing optical materials with high refractive index and functionalities such as large optical anisotropy and nonlinearity.

cond-mat.mtrl-sci↗

arXiv2023

Colossal optical anisotropy from atomic-scale modulations

In modern optics, materials with large birefringence (Δn, where n is the refractive index) are sought after for polarization control (e.g. in wave plates, polarizing beam splitters, etc.), nonlinear optics and quantum optics (e.g. for phase matching and production of entangled photons), micromanipulation, and as a platform for unconventional light-matter coupling, such as Dyakonov-like surface polaritons and hyperbolic phonon polaritons. Layered "van der Waals" materials, with strong intra-layer bonding and weak inter-layer bonding, can feature some of the largest optical anisotropy; however, their use in most optical systems is limited because their optic axis is out of the plane of the layers and the layers are weakly attached, making the anisotropy hard to access. Here, we demonstrate that a bulk crystal with subtle periodic modulations in its structure -- Sr9/8TiS3 -- is transparent and positive-uniaxial, with extraordinary index n_e = 4.5 and ordinary index n_o = 2.4 in the mid- to far-infrared. The excess Sr, compared to stoichiometric SrTiS3, results in the formation of TiS6 trigonal-prismatic units that break the infinite chains of face-shared TiS6 octahedra in SrTiS3 into periodic blocks of five TiS6 octahedral units. The additional electrons introduced by the excess Sr subsequently occupy the TiS6 octahedral blocks to form highly oriented and polarizable electron clouds, which selectively boost the extraordinary index n_e and result in record birefringence (Δn > 2.1 with low loss). The connection between subtle structural modulations and large changes in refractive index suggests new categories of anisotropic materials and also tunable optical materials with large refractive-index modulation and low optical losses.

physics.optics↗

arXiv2022

Heavily doped zinc oxide with plasma frequencies in the telecommunication wavelength range

We demonstrate heavy and hyper doping of ZnO by a combination of gallium (Ga) ion implantation using a focused ion beam (FIB) system and post-implantation laser annealing. Ion implantation allows for the incorporation of impurities with nearly arbitrary concentrations, and the laser-annealing process enables dopant activation close to or beyond the solid-solubility limit of Ga in ZnO. We achieved heavily doped ZnO:Ga with free-carrier concentrations of ~10^21 cm^(-3), resulting in a plasma wavelength of 1.02 um, which is substantially shorter than the telecommunication wavelength of 1.55 um. Thus, our approach enables the control of the plasma frequency of ZnO from the far infrared down to 1.02 um, providing a promising plasmonic material for applications in this regime.

physics.app-ph↗

arXiv2022

Tuning carrier density and phase transitions in oxide semiconductors using focused ion beams

We demonstrate spatial modification of the optical properties of thin-film metal oxides, zinc oxide and vanadium dioxide as representatives, using a commercial focused ion beam (FIB) system. Using a Ga+ FIB and thermal annealing, we demonstrated variable doping of a band semiconductor, zinc oxide (ZnO), achieving carrier concentrations from 10^18 cm-3 to 10^20 cm-3. Using the same FIB without subsequent thermal annealing, we defect-engineered a correlated semiconductor, vanadium dioxide (VO2), locally modifying its insulator-to-metal transition (IMT) temperature by range of ~25 degrees C. Such area-selective modification of metal oxides by direct writing using a FIB provides a simple, mask-less route to the fabrication of optical structures, especially when multiple or continuous levels of doping or defect density are required.

cond-mat.mtrl-sci↗

arXiv2021

Switchable induced-transmission filters enabled by vanadium dioxide

Abstract: An induced-transmission filter (ITF) uses an ultrathin layer of metal positioned at an electric-field node within a dielectric thin-film bandpass filter to select one transmission band while suppressing other transmission bands that would have been present without the metal layer. Here, we introduce a switchable mid-infrared ITF where the metal film can be "switched on and off", enabling the modulation of the filter response from single-band to multiband. The switching is enabled by a deeply subwavelength film of vanadium dioxide (VO2), which undergoes a reversible insulator-to-metal phase transition. We designed and experimentally demonstrated an ITF that can switch between two states: one broad passband across the long-wave infrared (LWIR, 8 - 12 um) and one narrow passband at ~8.8 um. Our work generalizes the ITF -- previously a niche type of bandpass filter -- into a new class of tunable devices. Furthermore, our unique fabrication process -- which begins with thin-film VO2 on a suspended membrane -- enables the integration of VO2 into any thin-film assembly that is compatible with physical vapor deposition (PVD) processes, and is thus a new platform for realizing tunable thin-film filters.

physics.optics↗

arXiv2021

Planck spectroscopy

All spectrometers rely on some mechanism to achieve spectral selectivity; common examples include gratings, prisms, and interferometers with moving mirrors. We experimentally demonstrated and validated a spectroscopic technique -- here dubbed Planck spectroscopy -- that measures the spectral emissivity of a surface using only a temperature-controlled stage and a detector, without any wavelength-selective optical components. Planck spectroscopy involves the measurement of temperature-dependent thermally emitted power, where the spectral selectivity is realized via the temperature- and wavelength dependence of Planck's law. We experimentally demonstrated and validated Planck spectroscopy in the mid infrared, for wavelengths from 3 to 13 um -- limited primarily by the bandwidth of our detector -- with resolution of approximately 1 um. The minimalistic setup of Planck spectroscopy can be implemented using infrared cameras to achieve low-cost infrared hyperspectral imaging and imaging ellipsometry.

physics.optics↗

arXiv2021

Passive frequency conversion of ultraviolet images into the visible using perovskite nanocrystals

We demonstrate a passive down-conversion imaging system that converts broadband ultraviolet light to narrow-band green light while preserving the directionality of rays, and thus enabling direct down-conversion imaging. At the same time our system has high transparency in the visible, enabling superimposed visible and ultraviolet imaging. The frequency conversion is performed by a subwavelength-thickness transparent downconverter based on highly efficient CsPbBr3 nanocrystals incorporated into the focal plane of a simple telescope or relay-lens geometry. The resulting imaging performance of this down-conversion system approaches the diffraction limit. This demonstration sets the stage for the incorporation of other high-efficiency perovskite nanocrystal materials to enable passive multi-frequency conversion imaging systems.

physics.optics↗

arXiv2020

Hyperspectral interference tomography of nacre

Structural characterization of biologically formed materials is essential for understanding biological phenomena and their environment, and generating new bio-inspired engineering concepts. For example, nacre -- formed by mollusks in the ocean -- encodes local environmental conditions throughout its formation and has exceptional strength due to its nanoscale brick-and-mortar structure. This layered structure, comprising transparent aragonite tablets bonded with an ultra-thin organic polymer, also results in stunning interference colors. Existing methods of structural characterization of nacre rely on some form of cross-sectional analysis, such as scanning electron microscopy or polarization-dependent imaging contrast (PIC) mapping. However, these techniques are destructive and too time- and resource-intensive to analyze large sample areas. Here we present an all-optical, rapid, and non-destructive imaging technique -- hyperspectral interference tomography (HIT) -- to spatially map the structural parameters of nacre and other disordered layered materials. We combined hyperspectral imaging with optical-interference modeling to infer the mean tablet thickness and disordering of nacre layers across entire mollusk shells at various stages of development, observing a previously unknown relationship between the growth of the mollusk and tablet thickness. Our rapid, inexpensive, and nondestructive method can be readily applied to in-field studies.

physics.optics↗

arXiv2020

Ultrathin broadband reflective optical limiter

Optical limiters are nonlinear devices that feature decreasing transmittance with increasing incident optical intensity, and thus can protect sensitive components from high-intensity illumination. The ideal optical limiter reflects rather than absorbs light in its active ("limiting") state, minimizing risk of damage to the limiter itself. Previous efforts to realize reflective limiters were based on embedding nonlinear layers into relatively thick multilayer photonic structures, resulting in substantial fabrication complexity, reduced speed and, in some instances, limited working bandwidth. We overcome these tradeoffs by using the insulator-to-metal transition in vanadium dioxide (VO2) to achieve intensity-dependent modulation of resonant transmission through aperture antennas. Due to the dramatic change of optical properties across the insulator-to-metal transition, low-quality-factor resonators were sufficient to achieve high on-off ratios in device transmittance. As a result, our ultra-thin reflective limiter (thickness ~1/100 of the free-space wavelength) is broadband in terms of operating wavelength (> 2 um at 10 um) and angle of incidence (up to ~50$°$ away from the normal).

physics.optics↗

arXiv2019

Guidelines for measurement of thermal emission

Thermal emission is the radiation of electromagnetic waves from hot objects. The promise of thermal-emission engineering for applications in energy harvesting, radiative cooling, and thermal camouflage has recently led to renewed research interest in this topic. There is a substantial need for accurate and precise measurement of thermal emission in a laboratory setting, which can be challenging in part due to the presence of background emission from the surrounding environment and the measurement instrument itself. This is especially true for measurements of emitters at temperatures close to that of the environment, where the impact of background emission is relatively large. In this paper, we describe, recommend, and demonstrate general procedures for thermal-emission measurements that are applicable to most experimental conditions, including less-common and more-challenging cases that include thermal emitters with temperature-dependent emissivity and emitters that are not in thermal equilibrium.

physics.optics↗

arXiv2019

Wide-angle spectrally selective absorbers and thermal emitters based on inverse opals

Engineered optical absorbers are of substantial interest for applications ranging from stray light reduction to energy conversion. We demonstrate a large-area (centimeter-scale) metamaterial that features near-unity frequency-selective absorption in the mid-infrared wavelength range. The metamaterial comprises a self-assembled porous structure known as an inverse opal, here made of silica. The structure's large volume fraction of voids, together with the vibrational resonances of silica in the mid-infrared spectral range, reduce the metamaterial's refractive index to close to that of air and introduce considerable optical absorption. As a result, the frequency-selective structure efficiently absorbs incident light of both polarizations even at very oblique incidence angles. The absorber remains stable at high temperatures (measured up to ~900 degrees C), enabling its operation as a frequency-selective thermal emitter. The excellent performance of this absorber/emitter and ease of fabrication make it a promising surface coating for passive radiative cooling, laser safety, and other large-area applications.

physics.optics↗

arXiv2019

Temperature-independent thermal radiation

Thermal emission is the process by which all objects at non-zero temperatures emit light, and is well-described by the classic Planck, Kirchhoff, and Stefan-Boltzmann laws. For most solids, the thermally emitted power increases monotonically with temperature in a one-to-one relationship that enables applications such as infrared imaging and non-contact thermometry. Here, we demonstrate ultrathin thermal emitters that violate this one-to-one relationship via the use of samarium nickel oxide (SmNiO3), a strongly correlated quantum material that undergoes a fully reversible, temperature-driven solid-state phase transition. The smooth and hysteresis-free nature of this unique insulator-to-metal (IMT) phase transition allows us to engineer the temperature dependence of emissivity to precisely cancel out the intrinsic blackbody profile described by the Stefan-Boltzmann law, for both heating and cooling. Our design results in temperature-independent thermally emitted power within the long-wave atmospheric transparency window (wavelengths of 8 - 14 um), across a broad temperature range of ~30 °C, centered around ~120 °C. The ability to decouple temperature and thermal emission opens a new gateway for controlling the visibility of objects to infrared cameras and, more broadly, new opportunities for quantum materials in controlling heat transfer.

physics.optics↗

arXiv2019

Depth thermography: non-invasive 3D temperature profiling using infrared thermal emission

We introduce a technique based on infrared thermal emission, termed depth thermography, that can remotely measure the temperature distribution beneath the surface of certain objects. Depth thermography utilizes the thermal-emission spectrum in the semitransparent spectral region of the target object to extract its temperature as a function of depth, in contrast with conventional thermography, which uses the spectrally integrated thermally emitted power to measure the surface temperature. Coupled with two-dimensional imaging, e.g., using an infrared hyperspectral camera or scanning a single-pixel spectrometer, this technique can yield volumetric temperature distributions. We carried out a proof-of-concept experiment on an asymmetrically heated fused-silica window, extracting the temperature distribution throughout the sample. Depth thermography may enable noncontact volumetric temperature measurements of microscopic objects such as multilayer electronic devices or macroscopic volumes of liquids and gasses as well as simultaneous all-optical measurements of optical and thermal properties.

physics.optics↗

arXiv2019

Optical properties of thin-film vanadium dioxide from the visible to the far infrared

The insulator-to-metal transition (IMT) in vanadium dioxide (VO2) can enable a variety of optics applications, including switching and modulation, optical limiting, and tuning of optical resonators. Despite the widespread interest in optics, the optical properties of VO2 across its IMT are scattered throughout the literature, and are not available in some wavelength regions. We characterized the complex refractive index of VO2 thin films across the IMT for free-space wavelengths from 300 nm to 30 μm, using broadband spectroscopic ellipsometry, reflection spectroscopy, and the application of effective-medium theory. We studied VO2 thin films of different thickness, on two different substrates (silicon and sapphire), and grown using different synthesis methods (sputtering and sol gel). While there are differences in the optical properties of VO2 synthesized under different conditions, they are relatively minor compared to the change resulting from the IMT, most notably in the ~2 - 11 μm range where the insulating phase of VO2 has relatively low optical loss. We found that the macroscopic optical properties of VO2 are much more robust to sample-to-sample variation compared to the electrical properties, making the refractive-index datasets from this article broadly useful for modeling and design of VO2-based optical and optoelectronic components.

physics.optics↗

arXiv2018

Nanosecond mid-infrared pulse generation via modulated thermal emissivity

We demonstrate the generation of nanosecond mid-infrared pulses via fast modulation of thermal emissivity, enabled by the absorption of visible pump pulses in unpatterned silicon and gallium arsenide. The free-carrier dynamics in these materials result in nanosecond-scale modulation of thermal emissivity, leading to nanosecond pulsed thermal emission. To our knowledge, the nanosecond thermal-emissivity modulation demonstrated in this work is three orders of magnitude faster than what has been previously demonstrated. We also indirectly observed sub-nanosecond thermal pulses from hot carriers in semiconductors. The experiments are well described by our multiphysics model. Our method of converting visible pulses into the mid infrared using modulated emissivity obeys different scaling laws and can have significant wavelength tunability compared to approaches based on conventional nonlinearities.

physics.optics↗

arXiv2018

Thermal-emission measurements near room temperature using Fourier-transform infrared spectroscopy

Accurate characterization of thermal emitters can be challenging due to the presence of background thermal emission from components of the experimental setup and the surrounding environment. This is especially true for an emitter operating close to room temperature. Here, we explore characterization of near-room-temperature thermal emitters using Fourier-transform infrared (FTIR) spectroscopy. We find that the thermal background arising from optical components placed between the beam splitter and the detector in an FTIR spectrometer appears as a "negative" contribution to the Fourier-transformed signal, leading to errors in thermal-emission measurements near room temperature. Awareness of this contribution will help properly calibrate low-temperature thermal-emission measurements.

physics.ins-det↗

arXiv2018

Multi-refractive-index metamaterials based on subwavelength waveguide arrays

We demonstrate a metamaterial that cannot be described by a single set of refractive-index and impedance values, even for fixed frequency and polarization. The metamaterial structure is a stack of dissimilar waveguides with subwavelength width and spacing, which guide light at different phase velocities. This multi-refractive-index metamaterial (MRIM) can be viewed as a spatial superposition of multiple homogeneous materials. Using full-wave simulations, we demonstrate several optical components based on MRIMs, including prisms that deflect light to multiple angles, lenses with multiple focal points, and multi-index Fabry-Perot etalons with an enhanced density of resonant modes. We provide a theoretical framework for analyzing MRIMs to determine effective refractive indices, fractions of power to each channel (i.e., to each refractive index), and transmittance.

physics.optics↗

arXiv2018

Enhancing human color vision by breaking binocular redundancy

To see color, the human visual system combines the response of three types of cone cells in the retina--a compressive process that discards a significant amount of spectral information. Here, we present an approach to enhance human color vision by breaking its inherent binocular redundancy, providing different spectral content to each eye. We fabricated a set of optical filters that "splits" the response of the short-wavelength cone between the two eyes in individuals with typical trichromatic vision, simulating the presence of approximately four distinct cone types ("tetrachromacy"). Such an increase in the number of effective cone types can reduce the prevalence of metamers--pairs of distinct spectra that resolve to the same tristimulus values. This technique may result in an enhancement of spectral perception, with applications ranging from camouflage detection and anti-counterfeiting to new types of artwork and data visualization.

physics.bio-ph↗