arXiv subjects

Jaehyung Ju

Publications and source records attributed to Jaehyung Ju.

12 recordsLinked to original sources

arXiv2025

Snap-Through Thermomechanical Metamaterials for High-Performance Thermal Rectification

Thermal diodes that enable directional heat transport are essential for advanced thermal management in microelectronics, energy systems, and thermal logic devices. However, existing designs based on phase-change materials, nanostructures, or interfacial engineering suffer from limited rectification performance, configurational inflexibility, and poor scalability. Here, we present a thermomechanical metamaterial-based thermal diode that combines temperature-responsive actuation with structural bistability to achieve high-efficiency, nonreciprocal thermal transport. The device integrates shape memory alloy (SMA) springs with pre-buckled copper strips that undergo snap-through transitions in response to thermal gradients. This reconfiguration enables contact-based conduction in the forward mode and suppresses reverse heat flow via radiative isolation. We develop a coupled analytical model combining Euler-Bernoulli beam theory and a thermal resistance network, and validate the system through finite element (FE) simulations and experiments. The device achieves a thermal rectification ratio exceeding 900, with robust cycling stability and structural integrity. A modular stacking strategy further enhances scalability without compromising performance. This work establishes a new design framework for high-performance, passive thermal rectifiers that bridge mechanical metamaterials and advanced thermal engineering.

physics.app-ph↗

arXiv2025

Analytical modeling of laminated composite rings on nonreciprocal elastic foundations under non-axisymmetric loading

A mechanical model of a laminated composite ring on a nonreciprocal elastic foundation is a valuable engineering tool during the early design stages of various applications, such as non-pneumatic wheels, flexible bearings, expandable tubulars in oil wells, and vascular stents interacting with blood vessel linings, especially under non-axisymmetric loadings. Despite its importance, limited research has focused on the interaction between laminated composite rings and nonreciprocal elastic foundations. Moreover, no quantitative studies have yet explored the influence of foundation stiffness on the ring deformation. This work aims to develop an analytical framework for a laminated composite ring supported by a nonreciprocal elastic foundation under non-axisymmetric loading conditions. The model generates a design map that correlates the foundation stiffness with the ring deformation, accounting for ring dimensions, laminate layup architecture, and lamina anisotropy. The closed-form solution provides an efficient design tool for analyzing non-axisymmetric and nonuniform loadings at a low computational cost. The resulting design map provides a valuable resource for exploring the interaction between the nonreciprocal foundation and the laminated ring. The proposed analytical framework and design map hold broad potential applications in automotive, mechanical, civil, and biomedical engineering fields.

physics.app-ph↗

arXiv2024

Unveiling New Mechanical Couplings in 3D Lattices: Axial-Bending and the Role of Symmetry Breaking

Mechanical couplings with symmetry breaking open up novel applications such as robotic metamaterials and directional mechanical signal guidance. However, most studies on 3D mechanical couplings have been limited to ad-hoc axial-twist designs due to a lack of comprehensive understanding of 3D non-centrosymmetry and chirality. Few theoretical methods exist to identify and quantify mechanical couplings in non-centrosymmetric and chiral lattices, typically relying on crystal physics (point group symmetry) and generalized constitutive equations. By extending symmetry breaking to mirror and inversion symmetries, we identify a broader range of mechanical couplings beyond axial-twist, such as axial-bending couplings. We develop a generalized 3D micropolar model of curved cubic lattices, encompassing both non-centrosymmetric achiral and chiral geometries, to quantify anisotropic physical properties and mechanical couplings as functions of curvature and handedness. Integrating point group symmetry operations with micropolar homogenized constitutive equations for curved cubic lattices, including mirror and inversion symmetry breaking, provides a clear design framework for identifying and quantifying anisotropic physical properties and mechanical couplings beyond axial-twist. This study uncovers a novel axial-bending coupling in non-centrosymmetric structures and highlights the weak correlation between chirality and both axial-bending and axial-twisting couplings. It also offers design guidelines for achieving multimodal couplings. The relationship between metamaterials' geometry and physical properties aligns with Neumann's principle. This work presents a robust framework for understanding mechanical couplings related to symmetry breaking and spatial anisotropy in metamaterial design, drawing an analogy to crystal physics and crystal chemistry.

cond-mat.mtrl-sci↗

arXiv2023

Residual Stress-Driven Non-Euclidean Morphing in Origami Structures

Non-Euclidean surfaces are ubiquitous in numerous engineering fields, such as automotive, aerospace, and biomedical engineering domains. Morphing origami has numerous potential engineering applications, including soft robots, mechanical metamaterials, antennas, aerospace structures, and biomedical devices, owing to its intrinsic morphing features from two-dimensional (2D) planes to three-dimensional (3D) surfaces. However, the current one-dimensional (1D) hinge deformation-driven transformation of foldable origami with rigid or slightly deformable panels cannot achieve a 3D complex and large curvilinear morphing. Moreover, most active origami structures use thin hinges with soft materials on their creases, thus resulting in a lower load capability. This study proposes a novel origami morphing method that demonstrates large free-form surface morphing, e.g., Euclidean to non-Euclidean surface morphing with shape-locking. We embedded tensorial anisotropic stress in origami panels during the extrusion-based 3D printing of shape memory polymers. The extrusion-based 3D printing of isotropic shape memory polymers can produce tensorial anisotropic stress in origami panels during fabrication, which can realize large non-Euclidean surface morphing with multiple deformation modes. The connecting topology of the origami unit cells influences the global morphing behavior owing to the interaction of the deformation of adjacent panels. Non-Euclidean morphing integrated with four-dimensional (4D) printing can provide multimodal shape locking at material and structural levels. The non-Euclidean surface morphing caused by tensorial residual stress in the panel during 3D printing expands the design space of origami and kirigami structures.

cond-mat.mtrl-sci↗

arXiv2023

Topologically Variable and Volumetric Morphing of 3D Architected Materials with Shape Locking

The morphing of 3D structures is suitable for i) future tunable material design for customizing material properties and ii) advanced manufacturing tools for fabricating 3D structures on a 2D plane. However, there is no inverse design method for topologically variable and volumetric morphing or morphing with shape locking, which limits practical engineering applications. In this study, we construct a general inverse design method for 3D architected materials for topologically variable and volumetric morphing, whose shapes are lockable in the morphed states, which can contribute to future tunable materials, design, and advanced manufacturing. Volumetric mapping of bistable unit cells onto any 3D morphing target geometry with kinematic and kinetic modifications can produce flat-foldable and volumetric morphing structures with shape-locking. This study presents a generalized inverse design method for 3D metamaterial morphing that can be used for structural applications with shape locking. Topologically variable morphing enables the manufacture of volumetric structures on a 2D plane, saving tremendous energy and materials compared with conventional 3D printing. Volumetric morphing can significantly expand the design space with tunable physical properties without limiting the selection of base materials.

cond-mat.mtrl-sci↗

arXiv2023

Mechanical transistors for logic-with-memory computing

As a potential revolutionary topic in future information processing, mechanical computing has gained tremendous attention for replacing or supplementing conventional electronics vulnerable to power outages, security attacks, and harsh environments. Despite its potential for constructing intelligent matter towards nonclassical computing systems beyond the von Neumann architecture, most works on mechanical computing demonstrated that the ad hoc design of simple logic gates cannot fully realize a universal mechanical processing framework involving interconnected arithmetic logic components and memory. However, such a logic-with-memory computing architecture is critical for complex and persistent state-dependent computations such as sequential logic. Here we propose a mechanical transistor (M-Transistor), abstracting omnipresent temperatures as the input-output mechanical bits, which consists of a metamaterial thermal channel as the gate terminal driving a nonlinear bistable soft actuator to selectively connect the output terminal to two other variable thermal sources. This M-Transistor is an elementary unit to modularly form various combinational and sequential circuits, such as complex logic gates, registers (volatile memory), and long-term memories (non-volatile memory) with much fewer units than the electronic counterparts. Moreover, they can establish a universal processing core comprising an arithmetic circuit and a register in a compact, reprogrammable network involving periodic read, write, memory, and logic operations of the mechanical bits. Our work contributes to realizing a non-electric universal mechanical computing architecture that combines multidisciplinary engineering with structural mechanics, materials science, thermal engineering, physical intelligence, and computational science.

physics.app-ph↗

arXiv2023

Multifunctional acoustic device based on phononic crystal with independently controlled asymmetric rotating rods

A reconfigurable phononic crystal (PnC) is proposed where elastic properties can be modulated by rotation of asymmetric solid scatterers immersed in water. The scatterers are metallic rods with cross-section of 120° circular sector. Orientation of each rod is independently controlled by an external electric motor that allows continuous variation of the local scattering parameters and dispersion of sound in the entire crystal. Due to asymmetry of the scatterers, the crystal band structure possesses highly anisotropic bandgaps. Synchronous rotation of all the scatterers by a definite angle changes regime of reflection to regime of transmission and vice versa. The same mechanically tunable structure functions as a gradient index medium by incremental, angular reorientation of rods along both row and column, and, subsequently, can serve as a tunable acoustic lens, an acoustic beam splitter, and finally an acoustic beam steerer.

physics.app-ph↗

arXiv2022

Mechanical couplings of 3D lattice materials discovered by micropolar elasticity and geometric symmetry

Similar to Poisson's effect, mechanical coupling is a directional indirect response by a directional input loading. With the advance in manufacturing techniques of 3D complex geometry, architected materials with unit cells of finite volume rather than a point yield more degrees of freedom and foster exotic mechanical couplings such as axial-shear, axial-rotation, axial-bending, and axial-twisting. However, most structural materials have been built by the ad hoc design of mechanical couplings without theoretical support of elasticity, which does not provide general guidelines for mechanical couplings. Moreover, no comprehensive study of all the mechanical couplings of 3D lattices with symmetry operations has been undertaken. Therefore, we construct the decoupled micropolar elasticity tensor of 3D lattices to identify individual mechanical couplings correlated with the point groups. The decoupled micropolar elasticity tensors, classified with 32 point groups, provide 15 mechanical couplings for 3D lattices. Our findings help provide solid theoretical guidelines for the mechanical couplings of 3D structural materials with potential applications in various areas, including active metamaterials, sensors, actuators, elastic waveguides, and acoustics.

cond-mat.mtrl-sci↗

arXiv2022

Magneto-thermomechanically triggered active mechanical metamaterials -- untethered, reversible, reprogrammable transformations with shape locking

Future active metamaterials for reconfigurable structural applications require fast, untethered, reversible, and reprogrammable (multimodal) transformability with shape locking. Herein, we aim to construct and demonstrate a magneto-thermomechanical tool that enables a single material system to transform with untethered, reversible, low-powered reprogrammable deformations and shape locking via the application of magneto-thermomechanically triggered prestress on a shape memory polymer and structural instability with asymmetric magnetic torque. We demonstrate the mutual assistance of two physics concepts - magnetic control combined with the thermomechanical behavior of shape memory polymers, without requiring new materials synthesis and high-power energy for reprogramming. Our approach can open a new path of active metamaterials, flexible yet stiff soft robots, and multimodal morphing structures, where we can design them in reversible and reprogrammable ways.

cond-mat.mtrl-sci↗

arXiv2022

Volumetric-mapping-based inverse design of 3D architected materials and mobility control by topology reconstruction

The recent development of modular origami structures has ushered in a new era for active metamaterials with multiple degrees of freedom (multi-DOF). Notably, no systematic inverse design approach for volumetric modular origami structures has been reported. Moreover, very few topologies of modular origami have been studied for the design of active metamaterials with multi-DOF. Herein, we develop an inverse design method and reconfigurable algorithm for constructing 3D active architected structures - we synthesize modular origami structures that can be volumetrically mapped to a target 3D shape. We can control the reconfigurability by reconstructing the topology of the architected structures. Our inverse design based on volumetric mapping with mobility control by topology reconstruction can be used to construct architected metamaterials with any 3D complex shape that are also transformable with multi-DOF. Our work opens a new path toward 3D reconfigurable structures based on volumetric inverse design. This work is significant for the design of 3D active metamaterials and 3D morphing devices for automotive, aerospace, and biomedical engineering applications.

cond-mat.mtrl-sci↗

arXiv2022

Encoding of direct 4D printing of isotropic single-material system for double-curvature and multimodal morphing

The ability to morph flat sheets into complex 3D shapes is extremely useful for fast manufacturing and saving materials while also allowing volumetrically efficient storage and shipment and a functional use. Direct 4D printing is a compelling method to morph complex 3D shapes out of as-printed 2D plates. However, most direct 4D printing methods require multi-material systems involving costly machines. Moreover, most works have used an open-cell design for shape shifting by encoding a collection of 1D rib deformations, which cannot remain structurally stable. Here, we demonstrate the direct 4D printing of an isotropic single-material system to morph 2D continuous bilayer plates into doubly curved and multimodal 3D complex shapes whose geometry can also be locked after deployment. We develop an inverse-design algorithm that integrates extrusion-based 3D printing of a single-material system to directly morph a raw printed sheet into complex 3D geometries such as a doubly curved surface with shape locking. Furthermore, our inverse-design tool encodes the localized shape-memory anisotropy during the process, providing the processing conditions for a target 3D morphed geometry. Our approach could be used for conventional extrusion-based 3D printing for various applications including biomedical devices, deployable structures, smart textiles, and pop-up Kirigami structures.

cs.GR↗

arXiv2022

Mechanical coupling effects of 2D lattices uncovered by decoupled micropolar elasticity tensor and symmetry operation

Mechanical couplings such as axial-shear and axial-bending have great potential in the design of active mechanical metamaterials with directional control of input and output loads in sensors and actuators. However, the current ad hoc design of mechanical coupling without theoretical support of elasticity cannot provide design guidelines for mechanical coupling with lattice geometries. Moreover, the correlation between mechanical coupling effects and geometric symmetry is not yet clearly understood. In this work, we systematically search for all possible mechanical couplings in 2D lattice structures by determining the non-zero diagonal terms in the decomposed micropolar elasticity tensor. We also correlate the mechanical couplings with the point-group symmetry of 2D lattices by applying the symmetry operation to the decomposed micropolar elasticity tensor. The decoupled micropolar constitutive equation uncovers eight coupling effects for 2D lattice structures. The symmetry operation of the decoupled micropolar elasticity tensor reveals the correlation of the mechanical coupling with the point groups. Our findings can strengthen the design of mechanical metamaterials with potential applications in areas including sensors, actuators, soft robots, and active metamaterials for elastic/acoustic wave guidance and thermal management.

cond-mat.mtrl-sci↗