arXiv subjects

Jaekwang Lee

Publications and source records attributed to Jaekwang Lee.

12 recordsLinked to original sources

arXiv2026

Plasmonic polaron in self-intercalated 1T-TiS2

Electron-boson coupling is central to a comprehensive understanding of the diverse physical phenomena emerging from many-body interactions. Yet less attention has been paid to how plasmons, collective bosonic modes of electron density oscillation, interact with conduction electrons and how external parameters can tune this interaction. Here, we present a clear display of composite quasiparticles stemming from electron-plasmon coupling, known as the plasmonic polaron, in self-intercalated 1T-TiS2, by using angle-resolved photoemission spectroscopy (ARPES), high-resolution electron energy loss spectroscopy (HR-EELS) and first-principles calculations. The single particle spectral function exhibits a distinctive plasmon-loss satellite with the same characteristic energy scale determined by HR-EELS measurements. The bosonic energy scale of plasmonic polaron is tunable by controlling charge carrier density and temperature, distinguishing itself from conventional polarons arising from electron-phonon interactions. Furthermore, we find that the dielectric screening strongly affects the formation of the plasmonic polaron states. Our findings provide direct spectroscopic evidence of plasmonic polarons and establish self-intercalated layered materials as a promising platform for studying, controlling, and harnessing plasmonic interactions in quantum materials.

cond-mat.mtrl-sci↗

arXiv2023

Exotic magnetic anisotropy near digitized dimensional Mott boundary

The magnetic anisotropy of low-dimensional Mott systems exhibits unexpected magnetotransport behavior useful for spin-based quantum electronics. Yet, the anisotropy of natural materials is inherently determined by the crystal structure, highly limiting its engineering. We demonstrate the magnetic anisotropy modulation near a digitized dimensional Mott boundary in artificial superlattices composed of a correlated magnetic monolayer SrRuO3 and nonmagnetic SrTiO3. The magnetic anisotropy is initially engineered by modulating the interlayer coupling strength between the magnetic monolayers. Interestingly, when the interlayer coupling strength is maximized, a nearly degenerate state is realized, in which the anisotropic magnetotransport is strongly influenced by both the thermal and magnetic energy scales. Our results offer a new digitized control for magnetic anisotropy in low-dimensional Mott systems, inspiring promising integration of Mottronics and spintronics.

cond-mat.str-el↗

arXiv2023

Controlling spin-orbit coupling to tailor type-II Dirac bands

NiTe2, a type-II Dirac semimetal with strongly tilted Dirac band, has been explored extensively to understand its intriguing topological properties. Here, using density-functional theory (DFT) calculations, we report that the strength of spin-orbit coupling (SOC) in NiTe2 can be tuned by Se substitution. This results in negative shifts of the bulk Dirac point (BDP) while preserving the type-II Dirac band. Indeed, combined studies using scanning tunneling spectroscopy (STS) and angle-resolved photoemission spectroscopy (ARPES) confirm that the BDP in the NiTe2-xSex alloy moves from +0.1 eV (NiTe2) to -0.3 eV (NiTeSe) depending on the Se concentrations, indicating the effective tunability of type-II Dirac fermions. Our results demonstrate an approach to tailor the type-II Dirac band in NiTe2 by controlling the SOC strength via chalcogen substitution. This approach can be applicable to different types of topological materials.

cond-mat.mtrl-sci↗

arXiv2022

A novel $\sqrt{19}\times\sqrt{19}$ superstructure in epitaxially grown 1T-TaTe$_2$

The spontaneous formation of electronic orders is a crucial element for understanding complex quantum states and engineering heterostructures in two-dimensional materials. We report a novel $\sqrt{19}\times\sqrt{19}$ charge order in few-layer thick 1T-TaTe$_2$ transition metal dichalcogenide films grown by molecular beam epitaxy, which has not been realized. Our photoemission and scanning probe measurements demonstrate that monolayer 1T-TaTe$_2$ exhibits a variety of metastable charge density wave orders, including the $\sqrt{19}\times\sqrt{19}$ superstructure, which can be selectively stabilized by controlling the post-growth annealing temperature. Moreover, we find that only the $\sqrt{19}\times\sqrt{19}$ order persists in 1T-TaTe$_2$ films thicker than a monolayer, up to 8 layers. Our findings identify the previously unrealized novel electronic order in a much-studied transition metal dichalcogenide and provide a viable route to control it within the epitaxial growth process.

cond-mat.mtrl-sci↗

arXiv2020

Propagation control of octahedral tilt in SrRuO3 via artificial heterostructuring

Bonding geometry engineering of metal-oxygen octahedra is a facile way of tailoring various functional properties of transition metal oxides. Several approaches, including epitaxial strain, thickness, and stoichiometry control, have been proposed to efficiently tune the rotation and tilting of the octahedra, but these approaches are inevitably accompanied by unnecessary structural modifications such as changes in thin-film lattice parameters. In this study, we propose a method to selectively engineer the octahedral bonding geometries, while maintaining other parameters that might implicitly influence the functional properties. A concept of octahedral tilt propagation engineering has been developed using atomically designed SrRuO3/SrTiO3 superlattices. In particular, the propagation of RuO6 octahedral tilting within the SrRuO3 layers having identical thicknesses was systematically controlled by varying the thickness of adjacent SrTiO3 layers. This led to a substantial modification in the electromagnetic properties of the SrRuO3 layer, significantly enhancing the magnetic moment of Ru. Our approach provides a method to selectively manipulate the bonding geometry of strongly correlated oxides, thereby enabling a better understanding and greater controllability of their functional properties.

cond-mat.str-el↗

arXiv2019

Phase Instability amid Dimensional Crossover in Artificial Oxide Crystal

Artificial crystals synthesized by atomic-scale epitaxy provides the ability to control the dimensions of the quantum phases and associated phase transitions via precise thickness modulation. In particular, reduction in dimensionality via quantized control of atomic layers is a powerful approach to revealing hidden electronic and magnetic phases. Here, we demonstrate a dimensionality-controlled and induced metal-insulator transition (MIT) in atomically designed superlattices by synthesizing a genuine two dimensional (2D) SrRuO3 crystal with highly suppressed charge transfer. The tendency to ferromagnetically align the spins in SrRuO3 layer diminishes in 2D as the interlayer exchange interaction vanishes, accompanying the 2D localization of electrons. Furthermore, electronic and magnetic instabilities in the two SrRuO3 unit cell layers induce a thermally-driven MIT along with a metamagnetic transition.

cond-mat.str-el↗

arXiv2019

Room Temperature Ferroelectric Ferromagnet in 1D Tetrahedral Chain Network

Ferroelectricity occurs in crystals with broken spatial inversion symmetry. In conventional perovskite oxides, concerted ionic displacements within a three-dimensional network of transition metal-oxygen polyhedra (MOx) manifest spontaneous polarization. Meanwhile, some two-dimensional networks of MOx can foster geometric ferroelectricity with magnetism, owing to the distortion of the polyhedra. Because of the fundamentally different mechanism of ferroelectricity in a two-dimensional network, one can further challenge an uncharted mechanism of ferroelectricity in a one-dimensional channel of MOx and estimate its feasibility. This communication presents ferroelectricity and coupled ferromagnetism in a one-dimensional FeO4 tetrahedral chain network of a brownmillerite SrFeO2.5 epitaxial thin film. The result provides a new paradigm for designing low-dimensional MOx networks, which is expected to benefit the realization of macroscopic ferro-ordering materials including ferroelectric ferromagnets.

cond-mat.mtrl-sci↗

arXiv2017

Hole doping, hybridization gap, and electronic correlation in graphene on a platinum substrate

The interaction between graphene and substrates provides a viable routes to enhance functionality of both materials. Depending on the nature of electronic interaction at the interface, the electron band structure of graphene is strongly influenced, allowing us to make use the intrinsic properties of graphene or to design additional functionality in graphene. Here, we present an angle-resolved photoemission study on the interaction between graphene and a platinum substrate. The formation of an interface between graphene and platinum leads to a strong deviation in the electronic structure of graphene not only from its freestanding form but also from the behavior observed on typical metals. The combined study on the experimental and theoretical electron band structure unveils the unique electronic properties of graphene on a platinum substrate, which singles out graphene/platinum as a model system investigating graphene on a metallic substrate with strong interaction.

cond-mat.mtrl-sci↗

arXiv2015

Selective control of oxygen sublattice stability by epitaxial strain in Ruddlesden-Popper films

Oxygen-defect control has long been considered an influential tuning knob for producing various property responses in complex oxide films. In addition to physical property changes, modification to the lattice structure, specifically lattice expansion, with increasing oxygen vacancy concentrations has been reported often and has become the convention for oxide materials. However, the current understanding of the lattice behavior in oxygen-deficient films becomes disputable when considering compounds containing different bonding environments or atomic layering. Moreover, tensile strain has recently been discovered to stabilize oxygen vacancies in epitaxial films, which further complicates the interpretation of lattice behavior resulting from their appearance. Here, we report on the selective strain control of oxygen vacancy formation and resulting lattice responses in the layered, Ruddlesden-Popper phases, La1.85Sr0.15CuO4. We found that a drastically reduced Gibbs free energy for oxygen vacancy formation near the typical growth temperature for tensile-strained epitaxial LSCO accounts for the large oxygen non-stoichiometry. Additionally, oxygen vacancies form preferentially in the equatorial position of the CuO2 plane, leading to a lattice contraction, rather than the expected expansion, observed with apical oxygen vacancies. Since oxygen stoichiometry plays a key role in determining the physical properties of many complex oxides, the strong strain coupling of oxygen nonstoichiometry and the unusual structural response reported here can provide new perspectives and understanding to the structure and property relationships of many other functional oxide materials.

cond-mat.mtrl-sci↗

arXiv2009

Interfacial Magnetoelectric Coupling in Tri-component Superlattices

Using first-principles density functional theory, we investigate the interfacial magnetoelectric coupling in a tri-component superlattice composed of a ferromagnetic metal (FM), ferroelectric (FE), and normal metal (NM). Using Fe/FE/Pt as a model system, we show that a net and cumulative interfacial magnetization is induced in the FM metal near the FM/FE interface. A carefully analysis of the magnetic moments in Fe reveals that the interfacial magnetization is a consequence of a complex interplay of interfacial charge transfer, chemical bonding, and spin dependent electrostatic screening. The last effect is linear in the FE polarization, is switchable upon its reversal, and yields a substantial interfacial magnetoelectric coupling.

cond-mat.mtrl-sci↗

arXiv2009

Magnetoelectric Coupling and Electric Control of Magnetization in Ferromagnet-Ferroelectric-Metal Superlattices

Ferromagnet-ferroelectric-metal superlattices are proposed to realize the large room-temperature magnetoelectric effect. Spin dependent electron screening is the fundamental mechanism at the microscopic level. We also predict an electric control of magnetization in this structure. The naturally broken inversion symmetry in our tri-component structure introduces a magnetoelectric coupling energy of $P M^2$. Such a magnetoelectric coupling effect is general in ferromagnet-ferroelectric heterostructures, independent of particular chemical or physical bonding, and will play an important role in the field of multiferroics.

cond-mat.mes-hall↗

arXiv2007

Spin-Filtering Multiferroic-Semiconductor Heterojunctions

We report on the structural and electronic properties of the interface between the multiferoic oxide YMnO$_3$ and wide band-gap semiconductor GaN studied with the Hubbard-corrected local spin density approximation (LSDA+U) to density-functional theory (DFT). We find that the band offsets at the interface between antiferromagnetically ordered YMnO$_3$ and GaN are different for spin-up and spin-down states. This behavior is due to the spin splitting of the valence band induced by the interface. The energy barrier depends on the relative orientation of the electric polarization with respect to the polarization direction of the GaN substrate suggesting an opportunity to create magnetic tunnel junctions in this materials system.

cond-mat.mtrl-sci↗