arXiv subjects

Jan E. Mehner

Publications and source records attributed to Jan E. Mehner.

5 recordsLinked to original sources

arXiv2020

Parametric Amplification of Broadband Vibrational Energy Harvesters for Energy-Autonomous Sensors Enabled by Field-Induced Striction

We investigate the influence of parametric excitation on MEMS vibration energy harvesters for energy autonomous sensor systems. In Industry 4.0 (or Industrial IoT) applications, interconnected sensors provide a means of data acquisition for automated control of the manufacturing process. Ensuring a continuous energy supply to the sensors is essential for their reliable operation. Manufacturing machines usually display a wide spectrum of vibration frequencies which needs to be covered by an array of harvester substructures in order to maintain the desired output level. We show that mechanical structures designed to implement a Helmholtz-Duffing oscillator have an increased bandwidth by exploiting several orders of parametric resonances. In contrast to concepts implementing parametric amplification in a multi-mode scenario, our concept is based on a single mechanical mode. Therefore, it is more robust against fabrication tolerances as the relevant multi-mode resonance conditions do not need to be matched on the level of single chips. Using exact transient simulations and semi-analytic models to showcase the relation of the Helmholtz-Duffing oscillator to the damped and driven Mathieu equation, we show that parametric resonances highly increase the bandwidth of the output power whenever high Helmholtz nonlinearities are present. To achieve the required nonlinearities, we suggest nonlinear stress-strain curves and we propose to achieve such nonlinearities through field-induced striction by magneto- or electrostriction. Thus, we are able to propose a novel energy harvester concept incorporating strictive materials that exploits the effects of parametric excitation to achieve broadband vibrational energy harvesting.

physics.app-ph↗

arXiv2020

Nonlinear Dynamical System Model for Drive Mode Amplitude Instabilities in MEMS Gyroscopes

The requirements pertaining to the reliability and accuracy of micro-electromechanical gyroscopic sensors are increasing,as systems for vehicle localization emerge as an enabling factor for autonomous driving. Since micro-electromechanical systems (MEMS) became a mature technology, the modelling techniques used for predicting their behaviour expanded from mostly linear approaches to include nonlinear dynamic effects. This leads to an increased understanding of the various nonlinear phenomena that limit the performance of MEMS sensors. In this work, we develop a model of two nonlinearly coupled mechanical modes and employ it to explain measured drive mode instabilities in MEMS gyroscopes. Due to 3:1 internal resonance between the drive mode and a parasitic mode, energy transfer within the conservative system occurs. From measurements of amplitude response curves showing hysteresis effects, we extract all nonlinear system parameters and conclude that the steady-state model needs to be expanded by a transient simulation in order to fully explain the measured system behaviour.

physics.app-ph↗

arXiv2020

Validating the Critical Point of Spontaneous Parametric Down-Conversion for over 600 Scanning MEMS Micro Mirrors on Wafer-Level

Sensors and actuators based on resonant micro-electro-mechanical systems (MEMS), such as scanning micro mirrors, are well-established in automotive and consumer products. As the areas of application broaden, the requirements for the MEMS are increasing. Devices outside of the performance specifications have to be rejected which is costly due to the high processing times of MEMS technologies. In particular, nonlinear system behavior is often found to cause unexpected device failure or performance issues. Thus, accurate simulation or rather system models which account for nonlinear sensor dynamics can not only increase process yield, but more importantly, lead to a comprehensive understanding of the underlying physics and to improved MEMS design. We have studied [1] the possibility of a rather drastic device failure induced by nonlinearities on the example of a resonant scanning MEMS micro mirror. On the level of a few selected chips, we have carefully measured the complex nonlinear system behavior and modeled it by a nonlinear mode-coupling phenomenon known as spontaneous parametric down-conversion (SPDC). The most intriguing feature of SPDC is the sudden change from a rather linear to a nonlinear system behavior at the critical oscillation amplitude. However, the threshold only lies within the range of the mirror's operational amplitude, if certain frequency resonance conditions regarding the mechanical modes are met. Thus, the critical amplitude strongly depends on the frequency spectrum of the MEMS design which in turn is largely influenced by fabrication imperfections. We validate the dependence of the critical amplitude on the resonance condition by measuring it for over 600 micro mirrors on wafer-level. Our work does not only validate the theory of SPDC with measurements on such a large scale, but also demonstrates modeling strategies which are essential for MEMS product design.

physics.app-ph↗

arXiv2019

Spontaneous parametric down-conversion induced by non-degenerate three-wave mixing in a scanning MEMS micro mirror

Scanning micro-mirror actuators are silicon-based oscillatory micro-electro-mechanical systems (MEMS). They enable laser distance measurements for automotive LIDAR applications as well as projection modules for the consumer market. For MEMS applications, the geometric structure is typically designed to serve a number of functional requirements. Most importantly, the mode spectrum contains a single high-Q mode, the drive mode, which per design is expected to yield the only resonantly excited geometric motion during operation. Yet here, we report on the observation of a resonant three-mode excitation via a process known as spontaneous parametric down-conversion. We show that this phenomenon, most extensively studied in the field of nonlinear optics, originates from three-wave coupling induced by geometric nonlinearities. In combination with further Duffing-type nonlinearities, the micro mirror displays a variety of nonlinear dynamical behaviour ranging from stationary state bifurcations to dynamical instabilities observable via amplitude modulations. We are able to explain and emulate all experimental observations using a single fundamental model. In particular, our analysis allows us to understand the conditions for the onset of three-wave down-conversion which if not accounted for in the design of the MEMS structure, can have drastic impact on its functionality even leading to fracture.

cond-mat.mes-hall↗

arXiv2018

Amplitude- and gas pressure-dependent nonlinear damping of high-Q oscillatory MEMS micro mirrors

Silicon-based micro-electromechanical systems (MEMS) can be fabricated using bulk and surface micromachining technology. A micro mirror designed as an oscillatory MEMS constitutes a prominent example. Typically, in order to minimize energy consumption, the micro mirror is designed to have high quality factors. In addition, a phase-locked loop guarantees resonant actuation despite the occurrence of frequency shifts. In these cases, the oscillation amplitude of the micro mirror is expected to scale linearly with the actuation input power. Here, however, we report on an experimental observation which clearly shows an amplitude depletion that is not in accordance with any linear behaviour. As a consequence, the actuation forces needed to reach the desired oscillation amplitude are by multiples higher than expected. We are able to explain the experimental observations accurately by introducing a single degree-of-freedom model including an amplitude-dependent nonlinear damping term. Remarkably, we find that the nonlinear damping shows a clear gas pressure dependency. We investigate the concepts and compare our findings on two different micro mirror design layouts.

cond-mat.mes-hall↗