arXiv subjects

Jan García-Morales

Publications and source records attributed to Jan García-Morales.

7 recordsLinked to original sources

arXiv2026

Energy-Efficient Access-Point Sleep-Mode Techniques for Cell-Free mmWave Massive MIMO Networks With Non-Uniform Spatial Traffic Density

Cell-free massive multiple-input multiple-output (MIMO) is a novel beyond 5G (B5G) and 6G paradigm that, through the use of a common central processing unit (CPU), coordinates a large number of distributed access points (APs) to coherently serve mobile stations (MSs) on the same time/frequency resource. By exploiting the characteristics of new less-congested millimeter wave (mmWave) frequency bands, these networks can improve the overall system spectral and energy efficiencies by using low-complexity hybrid precoders/decoders. For this purpose, the system must be correctly dimensioned to provide the required quality of service (QoS) to MSs under different traffic load conditions. However, only heavy traffic load conditions are usually taken into account when analysing these networks and, thus, many APs might be underutilized during low traffic load periods, leading to an inefficient use of resources and waste of energy. Aiming at the implementation of energy-efficient AP switch on/off strategies, several approaches have been proposed in the literature that only consider rather unrealistic uniform spatial traffic distribution in the whole coverage area. Unlike prior works, this paper proposes energy efficient AP sleep-mode techniques for cell-free mmWave massive MIMO networks that are able to capture the inhomogeneous nature of spatial traffic distribution in realistic wireless networks. The proposed framework considers, analyzes and compares different AP switch ON-OFF (ASO) strategies that, based on the use of goodness-of-fit (GoF) tests, are specifically designed to dynamically turn on/off APs to adapt to both the number and the statistical distribution of MSs in the network. Numerical results show that the use of properly designed GoF-based ASO strategies under a non-uniform spatial traffic distribution can serve to considerably improve the achievable energy efficiency.

eess.SP↗

arXiv2026

Evolutionary AP Switch ON/OFF Techniques for Energy-efficient Cell-free Massive MIMO Networks

Cell-free massive multiple input multiple output (CF-mMIMO) is an emerging technology for next-generation wireless systems, where dynamically adapting the set of active access points (APs) is crucial to balance quality of service (QoS) requirements and network energy consumption under highly time-varying and spatially non-uniform traffic loads. Existing AP ON/OFF mechanisms--typically based on worst-case dimensioning or greedy heuristics--explore the combinatorial activation space inadequately, leading to suboptimal energy-efficiency outcomes. This paper introduces two evolutionary AP-selection strategies tailored to CF-mMIMO networks. The first, a constrained genetic algorithm (CGA), identifies the near-optimal subset of active APs for any fixed activation cardinality, while an outer search determines the globally optimal operating point. The second, a Pareto-driven genetic algorithm (PDGA), jointly optimizes spectral and energy efficiency by evolving a Pareto front over all feasible activation patterns. A detailed computational-complexity analysis is provided for both techniques. Simulations conducted under realistic spatially inhomogeneous traffic and considering both conjugate beamforming (CB) and minimum mean square error (MMSE) processing confirm consistent performance gains. The proposed methods consistently outperform state-of-the-art greedy benchmarks, delivering noticeable improvements in energy efficiency for both CB and MMSE schemes, while simultaneously enhancing the energy-spectral efficiency tradeoff, which is typically difficult to improve without incurring penalties elsewhere. These results highlight the strong potential of evolutionary optimization as a powerful and reliable approach for energy-efficient CF-mMIMO deployments.

eess.SP↗

arXiv2026

SWIPT-Enhanced Cell-Free Massive MIMO Networks

Simultaneous wireless information and power transfer (SWIPT) has been advocated as a highly promising technology to provide near-perpetual operation to low-powered wireless devices in Internet-of-Things (IoT)-based wireless networks. In this paper, a SWIPT-enhanced cell-free massive MIMO network is proposed. In such a network, a large set of spatially distributed access points (APs) interconnected via a central processing unit (CPU) can collaboratively serve a large number of both energy harvesting mobile stations (MSs) (requiring wireless energy transfer) and conventional MSs (not requiring wireless energy transfer) on the same time-frequency resources. We consider spatially correlated Rician fading channels and the use of different precoding schemes that are based on different channel estimators differing on the assumed knowledge of the line-of-sight component. Mathematically manageable expressions are derived for the harvested energy during the downlink (DL) energy harvesting phase and the achievable spectral and energy efficiencies during the uplink (UL) payload transmission phase. A coupled UL/DL optimization problem is formulated aiming at finding the power control coefficients that maximize the minimum of the weighted achievable UL signal-to-interference-plus-noise ratios (SINRs) of all MSs. Extensive numerical results are presented that serve to highlight the existing trade-offs among the achievable spectral and energy efficiencies, the harvested energy, the energy dedicated to UL pilot transmission or the system configuration.

eess.SP↗

arXiv2026

Latency-Sensitive 5G RAN Slicing for Industry 4.0

Network slicing is a novel 5G paradigm that exploits the virtualization and softwarization of networks to create different logical network instances over a common network infrastructure. Each instance is tailored for specific Quality of Service (QoS) profiles so that network slicing can simultaneously support several services with diverse requirements. Network slicing can be applied at the Core Network or at the Radio Access Network (RAN). RAN slicing is particularly relevant to support latency-sensitive or timecritical applications since the RAN accounts for a significant part of the end-to-end transmission latency. In this context, this study proposes a novel latency-sensitive 5G RAN slicing solution. The proposal includes schemes to design slices and partition (or allocate) radio resources among slices. These schemes are designed with the objective to satisfy both the rate and latency demands of diverse applications. In particular, this study considers applications with deterministic aperiodic, deterministic periodic and nondeterministic traffic. The latency-sensitive 5G RAN slicing proposal is evaluated in Industry 4.0 scenarios where stringent and/or deterministic latency requirements are common. However, it can be evolved to support other verticals with latency-sensitive or time-critical applications.

cs.NI↗

arXiv2026

Latency-Sensitive 5G RAN Slicing for Deterministic Aperiodic Traffic in Smart Manufacturing

5G and beyond networks will support the digitalization of smart manufacturing thanks to their capacity to simultaneously serve different types of traffic with distinct QoS requirements. This can be achieved using Network Slicing that creates different logical network partitions (or slices) over a common infrastructure, and each can be tailored to support a particular type of traffic. The configuration of the Radio Access Network (RAN) slices strongly impacts the capacity of 5G and beyond to support critical services with stringent QoS requirements, and in particular deterministic requirements. Existing RAN Slicing solutions only consider the transmission rate (or bandwidth) requirements of the different services to partition the radio resources. This study demonstrates that this approach is not suitable to guarantee the stringent latency requirements of deterministic aperiodic traffic that is characteristic of industrial critical applications. We then propose designing RAN slices using descriptors that consider both the services' transmission rate and latency requirements, and demonstrate that this approach can support critical services that generate deterministic aperiodic traffic.

cs.NI↗

arXiv2026

Conjugate Beamforming Variants for Multicasting in Cell-Free Massive MIMO Systems

This paper studies scalable conjugate beamforming (CB) variants for physical-layer multicasting in cell-free massive multiple-input multiple-output (CF-mMIMO) systems. Focusing on fully distributed precoding, we analyze classical CB, normalized CB (NCB), and enhanced CB (ECB) within a subgroup-centric multicast framework. Multicast users are partitioned into subgroups based on large-scale fading similarity, which enables composite channel estimation, pilot reuse, and distributed precoding with low complexity. The performance of the different CB variants is evaluated in terms of aggregated spectral efficiency (ASE) under representative user geometries, including uniformly distributed users, spatially clustered deployments, and heterogeneous scenarios combining hotspots with more dispersed users. Monte Carlo simulations reveal a strong spatial geometry-dependent behavior: unicast transmission is preferable in uniform deployments, while subgroup-based multicasting becomes essential in clustered and heterogeneous scenarios. Among the CB-based precoders, NCB offers a robust performance-complexity trade-off across most scenarios, whereas ECB provides additional gains only when sufficient channel hardening is present. These results provide practical insights into the selection of low-complexity distributed precoders and multicast transmission modes in CF-mMIMO systems supporting broadband and multimedia services.

eess.SP↗

arXiv2026

RIS-Assisted Cell-Free Massive MIMO: RIS-MS Selection in FR1 and FR3

This paper explores the integration of reconfigurable intelligent surfaces (RISs) into cell-free massive multiple-input-multiple-output (CF-mMIMO) networks operating in FR1 and FR3 frequency bands. We present a comprehensive framework for analyzing RIS-assisted CF-mMIMO systems under realistic propagation conditions, accounting for frequency-dependent characteristics and RIS configurations. A novel RIS-user association algorithm is proposed to optimize phase-shift settings by assigning each RIS to a single user based on line of sight (LoS) connectivity. The system model incorporates spatially correlated Ricean fading channels and employs scalable partial-minimum mean square error (P-MMSE) combining. The numerical results demonstrate that the proposed RIS-user selection strategy significantly improves the spectral efficiency compared to random or exhaustive RIS configurations, particularly when the number of RISs is moderate. We also analyze the trade-off between training overhead and performance gains, showing that excessive pilot requirements can offset benefits when RIS density or element count increases. The results highlight the potential of the FR3 bands for RIS-assisted CF-mMIMO, provided advanced channel estimation techniques are adopted to mitigate overhead. These findings emphasize the importance of intelligent RIS-user pairing and scalable estimation methods for future 6G deployments.

eess.SP↗