arXiv subjects

Jan Harms

Publications and source records attributed to Jan Harms.

At least 37 records · Page 2Linked to original sources

arXiv2025

Direct Measurement of the Accretion Disk Formed in Prompt Collapse Mergers with Future Gravitational-Wave Observatories

The production site of heavy r-process elements, such as Gold and Uranium, is uncertain. Neutron star mergers are the only astrophysical phenomenon in which we have witnessed their formation. However, the amount of heavy elements resulting from the merger remains poorly constrained, mainly due to uncertainties on the mass and angular momentum of the disk formed in the merger remnant. Matter accretion from the disk is also thought to power gamma ray-bursts. We discover from numerical relativity simulations that the accretion disk influences the ringdown gravitational-wave signal produced by binaries that promptly collapse to black-hole at merger. We propose a method to \emph{directly} measure the mass of the accretion disk left during black hole formation in binary mergers using observatories such as the Einstein Telescope or Cosmic Explorer with a relative error of 10\% for binaries at a distance of up to 30~Mpc, corresponding to an event rate of 0.001 to 0.25 events per year.

gr-qc↗

arXiv2025

The impact of local noise recorded at the ET candidate sites on the signal to noise ratio of CBC gravitational wave signals for the ET triangle configuration

We present an evaluation of how site dependent noise can affect the signal to noise ratio (SNR) of compact binary coalescence (CBC) signals in the future 3rd generation gravitational wave (GW) detector Einstein Telescope (ET). The design of ET is currently pushing the scientific community to study its scientific potential with respect to known, and possibly unexpected, GW signals using its design sensitivity curves. However, local ambient noise may have an impact on the ET sensitivity at low frequency and therefore affect the SNR of CBC signals at low frequency. Therefore, we study the impact of ambient noise on the ET sensitivity curve at the two sites candidate to host ET - Sardinia, in Italy, and the Euregio Meuse-Rhine (EMR) at the Netherlands-Belgium border - and infer the impact on the ET sensitivity curve and how the SNR of CBC signals at low frequencies is affected. We find that Sardinia shows results which are on par, if not better, than the design case. On the other hand, ambient noise for the current EMR sensitivity curve in Terziet causes a higher degradation of the SNR performances.

gr-qc↗

arXiv2024

The Lunar Gravitational-wave Antenna: Mission Studies and Science Case

The Lunar Gravitational-wave Antenna (LGWA) is a proposed array of next-generation inertial sensors to monitor the response of the Moon to gravitational waves (GWs). Given the size of the Moon and the expected noise produced by the lunar seismic background, the LGWA would be able to observe GWs from about 1 mHz to 1 Hz. This would make the LGWA the missing link between space-borne detectors like LISA with peak sensitivities around a few millihertz and proposed future terrestrial detectors like Einstein Telescope or Cosmic Explorer. In this article, we provide a first comprehensive analysis of the LGWA science case including its multi-messenger aspects and lunar science with LGWA data. We also describe the scientific analyses of the Moon required to plan the LGWA mission.

gr-qc↗

arXiv2024

Classifying binary black holes from Population III stars with the Einstein Telescope: A machine-learning approach

Third-generation (3G) gravitational-wave detectors such as the Einstein Telescope (ET) will observe binary black hole (BBH) mergers at redshifts up to $z\sim 100$. However, an unequivocal determination of the origin of high-redshift sources will remain uncertain because of the low signal-to-noise ratio (S/N) and poor estimate of their luminosity distance. This study proposes a machine-learning approach to infer the origins of high-redshift BBHs. We specifically differentiate those arising from Population III (Pop. III) stars, which probably are the first progenitors of star-born BBH mergers in the Universe, and those originated from Population I-II (Pop. I-II) stars. We considered a wide range of models that encompass the current uncertainties on Pop. III BBH mergers. We then estimated the parameter errors of the detected sources with ET using the Fisher information-matrix formalism, followed by a classification using XGBoost, which is a machine-learning algorithm based on decision trees. For a set of mock observed BBHs, we provide the probability that they belong to the Pop. III class while considering the parameter errors of each source. In our fiducial model, we accurately identify $\gtrsim 10\%$ of the detected BBHs that originate from Pop. III stars with a precision $>90\%$. Our study demonstrates that machine-learning enables us to achieve some pivotal aspects of the ET science case by exploring the origin of individual high-redshift GW observations. We set the basis for further studies, which will integrate additional simulated populations and account for further uncertainties in the population modeling.

astro-ph.HE↗

arXiv2024

GWFish: A simulation software to evaluate parameter-estimation capabilities of gravitational-wave detector networks

An important step in the planning of future gravitational-wave (GW) detectors and of the networks they will form is the estimation of their detection and parameter-estimation capabilities, which is the basis of science-case studies. Several future GW detectors have been proposed or are under development, which might also operate and observe in parallel. These detectors include terrestrial, lunar, and space-borne detectors. In this paper, we present GWFish, a new software to simulate GW detector networks and to calculate measurement uncertainties based on the Fisher-matrix approximation. GWFish models the impact of detector motion on PE and makes it possible to analyze multiband scenarios, i.e., observation of a GW signal by different detectors in different frequency bands. We showcase a few examples for the Einstein Telescope (ET) including the sky-localization of binary neutron stars, and ET's capability to measure the polarization of GWs.

gr-qc↗

arXiv2024

Inferring fundamental spacetime symmetries with gravitational-wave memory: from LISA to the Einstein Telescope

We revisit gravitational wave (GW) memory as the key to measuring spacetime symmetries, extending beyond its traditional role in GW searches. In particular, we show how these symmetries may be probed via displacement and spin memory observations, respectively. We further find that the Einstein Telescope's (ET) sensitivity enables constraining the strain amplitude of a displacement memory to 2% and that of spin memory to 22%. Finally, we point out that neglecting memory could lead to an overestimation of measurement uncertainties for parameters of binary black hole (BBH) mergers by about 10% in ET.

gr-qc↗

arXiv2024

Adaptive algorithms for low-latency cancellation of seismic Newtonian-noise at the Virgo gravitational-wave detector

A system was recently implemented in the Virgo detector to cancel noise in its data produced by seismic waves directly coupling with the suspended test masses through gravitational interaction. The data from seismometers are being filtered to produce a coherent estimate of the associated gravitational noise also known as Newtonian noise. The first implementation of the system uses a time-invariant (static) Wiener filter, which is the optimal filter for Newtonian-noise cancellation assuming that the noise is stationary. However, time variations in the form of transients and slow changes in correlations between sensors are possible and while time-variant filters are expected to cope with these variations better than a static Wiener filter, the question is what the limitations are of time-variant noise cancellation. In this study, we present a framework to study the performance limitations of time-variant noise cancellation filters and carry out a proof-of-concept with adaptive filters on seismic data at the Virgo site. We demonstrate that the adaptive filters, at least those with superior architecture, indeed significantly outperform the static Wiener filter with the residual noise remaining above the statistical error bound.

gr-qc↗

arXiv2024

The response of the Moon to gravitational waves

The response of the Moon to gravitational waves (GWs) is used by some of the proposed lunar GW detectors like the Lunar Gravitational-wave Antenna (LGWA) to turn the Moon into an antenna for GWs. The deep connection between the lunar internal structure, its geophysical environment and the study of the Universe is intriguing, but given our limited understanding of the Moon today, it also makes it very difficult to predict the science potential of lunar GW detectors accurately. Lunar response models have been developed since the Apollo program, but there is evidence coming from seismic measurements during the Apollo missions that the models are not good enough and possibly underestimating the lunar GW response especially in the decihertz frequency band. In this paper, we will provide an extension of Freeman Dyson's half-space model to include horizontally layered geologies, which allows us to carry out computationally efficient calculations of the lunar GW response above 0.1\,Hz compared to the normal-mode simulations used in the past. We analyze how the results depend on the values of geometric and elastic parameters of the layered geological model, and we find that modifications of the geological model as required to explain Apollo seismic observations can boost the lunar GW response.

gr-qc↗

arXiv2024

Correlated 0.01Hz-40Hz seismic and Newtonian noise and its impact on future gravitational-wave detectors

We report correlations in underground seismic measurements with horizontal separations of several hundreds of meters to a few kilometers in the frequency range 0.01Hz to 40Hz. These seismic correlations could threaten science goals of planned interferometric gravitational-wave detectors such as the Einstein Telescope as well as atom interferometers such as MIGA and ELGAR. We use seismic measurements from four different sites, i.e. the former Homestake mine (USA) as well as two candidate sites for the Einstein Telescope, Sos Enattos (IT) and Euregio Maas-Rhein (NL-BE-DE) and the site housing the MIGA detector, LSBB (FR). At all sites, we observe significant coherence for at least 50% of the time in the majority of the frequency region of interest. Based on the observed correlations in the seismic fields, we predict levels of correlated Newtonian noise from body waves. We project the effect of correlated Newtonian noise from body waves on the capabilities of the triangular design of the Einstein Telescope's to observe an isotropic gravitational-wave background (GWB) and find that, even in case of the most quiet site, its sensitivity will be affected up to $\sim$20Hz. The resolvable amplitude of a GWB signal with a negatively sloped power-law behaviour would be reduced by several orders of magnitude. However, the resolvability of a power-law signal with a slope of e.g. $α=0$ ($α=2/3$) would be more moderately affected by a factor $\sim$ 6-9 ($\sim$3-4) in case of a low noise environment. Furthermore, we bolster confidence in our results by showing that transient noise features have a limited impact on the presented results.

gr-qc↗

arXiv2023

Gravitational wave signals from long lasting binary-single black hole encounters

In the dense regions of star clusters, close encounters with black holes (BHs) can occur giving rise to a new class of gravitational-wave (GW) signals. Binary-single encounters between three BHs are expected to dominate the rate of signals from unbound systems in the frequency band of terrestrial GW detectors. The encounter can describe a quasi-hyperbolic trajectory, which was the focus of a recent study. In some cases, the encounter can take a more complex form including one or two BH mergers as a result of the encounter, repeating cycles of close proximity between the BHs, and the exchange of a BH that is part of the binary. The variety of types of encounters leads to a variety of GW signals emerging from these encounters. Using the ARWV N-body code, we performed 42 numerical simulations, to explore various outcomes of binary-single interaction, and we characterize the diverse GW signatures produced during these encounters. Additionally, we evaluated the detectability of these GW signals by injecting them into the simulated noise of the Einstein Telescope and exploring different methods to detect the signals. Our findings shed light on the complexities of these interactions and their potential implications for GW astronomy.

gr-qc↗

arXiv2023

Design and implementation of a seismic Newtonian-noise cancellation system for the Virgo gravitational-wave detector

Terrestrial gravity perturbations caused by seismic fields produce the so-called Newtonian noise in gravitational-wave detectors, which is predicted to limit their sensitivity in the upcoming observing runs. In the past, this noise was seen as an infrastructural limitation, i.e., something that cannot be overcome without major investments to improve a detector's infrastructure. However, it is possible to have at least an indirect estimate of this noise by using the data from a large number of seismometers deployed around a detector's suspended test masses. The noise estimate can be subtracted from the gravitational-wave data; a process called Newtonian-noise cancellation (NNC). In this article, we present the design and implementation of the first NNC system at the Virgo detector as part of its AdV+ upgrade. It uses data from 110 vertical geophones deployed inside the Virgo buildings in optimized array configurations. We use a separate tiltmeter channel to test the pipeline in a proof-of-principle. The system has been running with good performance over months.

gr-qc↗

arXiv2023

Joint Optimization of seismometer arrays for the cancellation of Newtonian noise from seismic body waves in the Einstein Telescope

Seismic Newtonian noise is predicted to limit the sensitivity of the Einstein Telescope. It can be reduced with coherent noise cancellation techniques using data from seismometers. To achieve the best results, it is important to place the seismic sensors in optimal positions. A preliminary study on this topic was conducted for the Einstein Telescope (ET): it focused on the optimization of the seismic array for the cancellation of Newtonian noise at an isolated test mass. In this paper, we expand the study to include the nested shape of ET, i.e., four test masses of the low-frequency interferometers at each vertex of the detector. Results are investigated in function of the polarization content of the seismic field composed of body waves. The study also examines how performance can be affected by displacing the sensor array from its optimal position or by operating at frequencies other than those used for optimization.

astro-ph.IM↗

arXiv2023

Opportunities and limits of lunar gravitational-wave detection

A new era of lunar exploration has begun with participation of all major space agencies. This activity brings opportunities for revolutionary science experiments and observatories on the Moon. The idea of a lunar gravitational-wave detector was already proposed during the Apollo program. The key characteristic of the Moon is that it is seismically extremely quiet. It was also pointed out that the permanently shadowed regions at the lunar poles provide ideal conditions for gravitational-wave detection. In recent years, three different detector concepts were proposed with varying levels of technological complexity and science potential. In this paper, we confront the three concepts in terms of their observational capabilities based on a first more detailed modeling of instrumental noise. We identify important technological challenges and potential show-stoppers.

astro-ph.IM↗

arXiv2023

Pre-merger alert to detect the very-high-energy prompt emission from binary neutron-star mergers: Einstein Telescope and Cherenkov Telescope Array synergy

The current generation of very-high-energy $gamma-$ray (VHE; E above 30 GeV) detectors (MAGIC and H.E.S.S.) have recently demonstrated the ability to detect the afterglow emission of GRBs. However, the GRB prompt emission, typically observed in the 10 keV-10 MeV band, has so far remained undetected at higher energies. Here, we investigate the perspectives of multi-messenger observations to detect the prompt emission of short GRBs in VHE. Considering binary neutron star mergers as progenitors of short GRBs, we evaluate the joint detection efficiency of the Cherenkov Telescope Array (CTA) observing in synergy with the third generation of gravitational wave detectors, such as the Einstein Telescope (ET) and Cosmic Explorer (CE). In particular, we evaluate the expected capabilities to detect and localize gravitational wave events in the inspiral phase and to provide an early warning alert able to drive the VHE search. We compute the amount of possible joint detections by considering several observational strategies, and demonstrate that the sensitivities of CTA make the detection of the VHE emission possible even if it is several orders fainter than the one observed at 10 keV-10 MeV. We discuss the results in terms of possible scenarios of production of VHE photons from binary neutron star mergers by considering GRB prompt and afterglow emissions.

astro-ph.HE↗

arXiv2023

Science with the Einstein Telescope: a comparison of different designs

The Einstein Telescope (ET), the European project for a third-generation gravitational-wave detector, has a reference configuration based on a triangular shape consisting of three nested detectors with 10 km arms, where in each arm there is a `xylophone' configuration made of an interferometer tuned toward high frequencies, and an interferometer tuned toward low frequencies and working at cryogenic temperature. Here, we examine the scientific perspectives under possible variations of this reference design. We perform a detailed evaluation of the science case for a single triangular geometry observatory, and we compare it with the results obtained for a network of two L-shaped detectors (either parallel or misaligned) located in Europe, considering different choices of arm-length for both the triangle and the 2L geometries. We also study how the science output changes in the absence of the low-frequency instrument, both for the triangle and the 2L configurations. We examine a broad class of simple `metrics' that quantify the science output, related to compact binary coalescences, multi-messenger astronomy and stochastic backgrounds, and we then examine the impact of different detector designs on a more specific set of scientific objectives.

gr-qc↗

arXiv2023

The payload of the Lunar Gravitational-wave Antenna

The toolbox to study the Universe grew on 14 September 2015 when the LIGO-Virgo collaboration heard a signal from two colliding black holes between 30-250 Hz. Since then, many more gravitational waves have been detected as detectors increased sensitivity. However, the current detector design sensitivity curves still have a lower cut-off of 10 Hz. To detect even lower-frequency gravitational-wave signals, the Lunar Gravitational-wave Antenna will use an array of seismic stations in a permanently shadowed crater. It aims to detect the differential between the elastic response of the Moon and the suspended inertial sensor proof mass motion induced by gravitational waves. A cryogenic superconducting inertial sensor is under development that aims for fm/rtHz sensitivity or better down to 1 Hz and is planned to be deployed in seismic stations. Here, we describe the current state of research towards the inertial sensor, its applications and additional auxiliary technologies in the payload of the lunar gravitational-wave detection mission.

gr-qc↗

arXiv2022

Utilizing the null stream of the Einstein Telescope

Among third-generation ground-based gravitational-wave detectors proposed for the next decade, the Einstein Telescope provides a unique kind of null stream $\unicode{x2014}$ the signal-free linear combination of data $\unicode{x2014}$ that enables otherwise inaccessible tests of the noise models. We project and showcase challenges in modeling the noise in the 2030s and how it will affect the performance of third-generation detectors. We find that the null stream of the Einstein Telescope is capable of eliminating transient detector glitches that are known to limit current gravitational-wave searches. The techniques we discuss are computationally efficient and do not require a priori knowledge about glitch models. Furthermore, we show how the null stream can be used to provide an unbiased estimation of the noise power spectrum necessary for online and offline data analyses even with multiple loud signals in the band. We overview other approaches to utilizing the null stream. Finally, we comment on the limitations and future challenges of null-stream analyses for the Einstein Telescope and arbitrary detector networks.

gr-qc↗

arXiv2022

Snowmass 2021 Topical Report on Synergies in Research at Underground Facilities

This is a Snowmass 2021 Topical Report for the Underground Facilities and Infrastructure Frontier on Synergies in Research at Underground Facilities: A broad range of scientific and engineering research is possible in underground laboratories, beyond the physics-focused activities described in the other Underground Facilities and Infrastructure Topical Reports. These areas of research include nuclear astrophysics, geology, geoengineering, gravitational wave detection, biology, and perhaps soon quantum information science. This UF Topical Report will survey those other scientific and engineering research activities that share interest in research-orientated Underground Facilities and Infrastructure. In most cases the breadth and depth of research aims is too large to cover in completeness and references to surveys or key documents for those fields are provided after introductory summaries. Additional attention is then given to shared, similar, and unique needs of each research area with respect to the broader underground research community's Underground Facilities and Infrastructure needs. Where potential conflicts of usage type, site, or duration might arise, these are identified.

hep-ex↗