arXiv subjects

Jan Luxa

Publications and source records attributed to Jan Luxa.

7 recordsLinked to original sources

arXiv2026

An Ultrathin Laterally Conductive Mesh Interphase Enables Spatially Extended Zinc Deposition for Aqueous Zinc Batteries

Zn metal anodes often suffer from nonuniform interfacial reactions during cycling, resulting in uneven deposition and dendrite growth. Existing artificial interphases can mitigate side reactions or regulate nucleation, but rarely achieve regulation of the interfacial electron/field distribution to sustain uniform deposition at the evolving Zn/electrolyte interface. Here, we develop an Au mesh interphase (AuMI), an ultrathin two-dimensional Au aerogel network that couples lateral electron redistribution with open pathways for ions. During Zn plating/stripping, the conductive AuMI distributes electron transport across the Zn surface, while its porous mesh preserves Zn$^{2+}$ access, enabling more uniform interfacial reactions. Experiments and simulations show that AuMI homogenizes the interfacial electric field and current distribution, promotes more uniform Zn plating/stripping, and limits dendrite growth. As a result, this regulated interfacial reaction mode enables AuMI Zn symmetric cells to operate stably for 3000 h at 1 mA cm$^{-2}$/1 mAh cm$^{-2}$ and for 1100 h at 10 mA cm$^{-2}$/10 mAh cm$^{-2}$, while AuMI Zn||NVO (NaV$_3$O$_8$\cdot$1.5H$_2$O) full cells retain 80.8 % capacity after over 5000 cycles at 1 A g$^{-1}$. These findings highlight the importance of combining ultrathin architecture, lateral electron transport, and open Zn2+ access in artificial interphases for stable aqueous Zn metal anodes.

cond-mat.mtrl-sci↗

arXiv2025

Anisotropic Phonon Dynamics and Directional Transport in Actinide van der Waals Semiconductor USe$_3$

Direction-dependent charge transport and optical responses are characteristic of van der Waals (vdW) materials with strong in-plane anisotropy. While transition-metal trichalcogenides (TMTCs) exemplify this behavior, heavier analogs remain largely unexplored. In this study we examine USe$_3$ as an anisotropic vdW material and a heavier analog of the well-studied TMTCs. We reveal strong in-plane anisotropy using polarization-resolved Raman spectroscopy, investigate strain-induced shifts of phonon modes, and quantify direction-dependent charge-carrier mobility through transport measurements on field-effect devices. First-principles calculations based on density-functional theory corroborate our findings, providing a theoretical basis for our experimental observations. Casting USe$_3$ as an actinide analog of a TMTC establishes a platform for exploring low-dimensional semiconductors that combine strong in-plane anisotropy with f-electron physics.

cond-mat.mtrl-sci↗

arXiv2022

The quantum dynamic range of room temperature spin imaging

Magnetic resonance imaging of spin systems combines scientific applications in medicine, chemistry and physics. Here, we investigate the pixel-wise coherent quantum dynamics of spins consisting of a 40 by 40 micron sized region of interest implanted with nitrogen vacancy centers (NV) coupled to a nano-magnetic flake of $\mathrm{CrTe_2}$. $\mathrm{CrTe_2}$ is an in-plane van der Waals ferromagnet, which we can probe quantitatively by the NV electron's spin signal even at room temperature. First, we combine the nano-scale sample shapes measured by atomic force microscope with the magnetic resonance imaging data. We then map out the coherent dynamics of the colour centers coupled to the van der Waals ferromagnet using pixel-wise coherent Rabi and Ramsey imaging of the NV sensor layer. Next, we fit the pixel-wise solution of the Hamiltonian to the quantum sensor data. Combining data and model, we can explore the detuning range of the spin oscillation with a quantum dynamic range of over $\left|\Delta_{max}\right|= 60 { }\mathrm{MHz} $ in the Ramsey interferometry mode. Finally, we show the effect of the $\mathrm{CrTe_2}$ van der Waals magnet on the coherence of the NV sensor layer and measure a 70 times increase in the maximum frequency of the quantum oscillation going from the Rabi to the Ramsey imaging mode.

quant-ph↗

arXiv2022

The bulk van der Waals layered magnet CrSBr is a quasi-1D material

Correlated quantum phenomena in one-dimensional (1D) systems that exhibit competing electronic and magnetic order are of strong interest for studying fundamental interactions and excitations, such as Tomonaga-Luttinger liquids and topological orders and defects with properties completely different from the quasiparticles expected in their higher-dimensional counterparts. However, clean 1D electronic systems are difficult to realize experimentally, particularly magnetically ordered systems. Here, we show that the van der Waals layered magnetic semiconductor CrSBr behaves like a quasi-1D material embedded in a magnetically ordered environment. The strong 1D electronic character originates from the Cr-S chains and the combination of weak interlayer hybridization and anisotropy in effective mass and dielectric screening with an effective electron mass ratio of $m^e_X/m^e_Y \sim 50$. This extreme anisotropy experimentally manifests in strong electron-phonon and exciton-phonon interactions, a Peierls-like structural instability and a Fano resonance from a van Hove singularity of similar strength of metallic carbon nanotubes. Moreover, due to the reduced dimensionality and interlayer coupling, CrSBr hosts spectrally narrow (1 meV) excitons of high binding energy and oscillator strength that inherit the 1D character. Overall, CrSBr is best understood as a stack of weakly hybridized monolayers and appears to be an experimentally attractive candidate for the study of exotic exciton and 1D correlated many-body physics in the presence of magnetic order.

cond-mat.mes-hall↗

arXiv2021

Nitrogen-doped graphene based triboelectric nanogenerators

Harvesting all sources of available clean energy is an essential strategy to contribute to healing current dependence on non-sustainable energy sources. Recently, triboelectric nanogenerators (TENGs) have gained visibility as new mechanical energy harvester offering a valid alternative to batteries, being particularly suitable for portable devices. Here, the increased capacitance of a few-layer graphene-based electrode is obtained by incorporating nitrogen-doped graphene (N_graphene), enabling a 3_fold enhancement in TENGs power output. The dependence of TENGs performance on the electronic properties of different N_graphene types, varying in the doping concentration and in the relative content of N-pyridinic and N-graphitic sites is investigated. These sites have different electron affinities, and synergistically contribute to the variation of the capacitive and resistive properties of N-graphene and consequently, TENG performance. It is demonstrated that the power enhancement of the TENG occurs when the N_graphene, an n-semiconductor, is interfaced between the positive triboelectric material and the electrode, while a deterioration of the electrical performance is observed when it is placed at the interface with the negative triboelectric material. This behavior is explained in terms of the dependence of N_graphene quantum capacitance on the electrode chemical potential which shifts according to the opposite polarization induced at the two electrodes upon triboelectrification.

physics.app-ph↗

arXiv2021

Atomistic spin textures on-demand in the van der Waals layered magnet CrSBr

Controlling magnetism in low dimensional materials is essential for designing devices that have feature sizes comparable to several critical length scales that exploit functional spin textures, allowing the realization of low-power spintronic and magneto-electric hardware. [1] Unlike conventional covalently-bonded bulk materials, van der Waals (vdW)-bonded layered magnets [2-4] offer exceptional degrees of freedom for engineering spin textures. [5] However, their structural instability has hindered microscopic studies and manipulations. Here, we demonstrate nanoscale structural control in the layered magnet CrSBr creating novel spin textures down to the atomic scale. We show that it is possible to drive a local structural phase transformation using an electron beam that locally exchanges the bondings in different directions, effectively creating regions that have vertical vdW layers embedded within the horizontally vdW bonded exfoliated flakes. We calculate that the newly formed 2D structure is ferromagnetically ordered in-plane with an energy gap in the visible spectrum, and weak antiferromagnetism between the planes. Our study lays the groundwork for designing and studying novel spin textures and related quantum magnetic phases down to single-atom sensitivity, potentially to create on-demand spin Hamiltonians probing fundamental concepts in physics, [6-10] and for realizing high-performance spintronic, magneto-electric and topological devices with nanometer feature sizes. [11,12]

cond-mat.mes-hall↗

arXiv2019

Hot Carrier and Surface Recombination Dynamics in Layered InSe Crystals

Layered indium selenide (InSe) is a van der Waals solid that has emerged as a promising material for high-performance ultrathin solar cells. The optoelectronic parameters that are critical to photoconversion efficiencies, such as hot carrier lifetime and surface recombination velocity, are however largely unexplored in InSe. Here, these key photophysical properties of layered InSe are measured with femtosecond transient reflection spectroscopy. The hot carrier cooling process is found to occur through phonon scattering. The surface recombination velocity and ambipolar diffusion coefficient are extracted from fits to the pump energy-dependent transient reflection kinetics using a free carrier diffusion model. The extracted surface recombination velocity is approximately an order of magnitude larger than that for methylammonium lead-iodide perovskites, suggesting that surface recombination is a principal source of photocarrier loss in InSe. The extracted ambipolar diffusion coefficient is consistent with previously reported values of InSe carrier mobility.

cond-mat.mtrl-sci↗