arXiv subjects

Jan Skaloud

Publications and source records attributed to Jan Skaloud.

9 recordsLinked to original sources

arXiv2026

Scene-agnostic ALS boresight self-calibration

ALS boresight calibration has relied for two decades on dedicated flight patterns over structured scenes containing planar surfaces of varied aspect and slope. While reliable, this approach imposes constraints on the scene content and operations, which limits its applicability to boresight recovery within routine mapping missions. We present a practical approach that substantially relaxes these requirements by replacing plane-based constraints with scene-agnostic point-to-point correspondences extracted automatically from overlapping ALS strips. Two complementary formulations are proposed to estimate boresight with laser vector observations: (i) a simpler parametric adjustment utilizing INS/GNSS trajectory; (ii) a rigorous formulation treating GNSS and raw inertial data within an existing factor-graph, i.e. a dynamic network, where boresight is added as an additional parameter. Both formulations are evaluated across four operational ALS flights equipped with five inertial systems, covering a wide range of flight altitudes, overlap geometries, terrain types and inertial sensor classes. The analysis draws a clear boundary between the legacy plane-based conditioning that falls short outside the calibration scenario and the proposed formulations, which either recover or absorb boresight effects under conventional mapping geometry. Among them, the lightweight formulation is sufficient for boresight recovery using tactical and navigation grade inertial sensors, while the general factor-graph approach is clearly superior when the inertial sensor errors are less observable within an optimal smoother. This supports the hypothesis that, for INS/GNSS trajectory of sufficient quality, the boresight calibration can be performed without particular scene prerequisites during routine mapping operations using a minimum of 3-4 overlapping strips, with either proposed formulation...

cs.CV↗

arXiv2026

The First Challenge on Remote Sensing Infrared Image Super-Resolution at NTIRE 2026: Benchmark Results and Method Overview

This paper presents the NTIRE 2026 Remote Sensing Infrared Image Super-Resolution (x4) Challenge, one of the associated challenges of NTIRE 2026. The challenge aims to recover high-resolution (HR) infrared images from low-resolution (LR) inputs generated through bicubic downsampling with a x4 scaling factor. The objective is to develop effective models or solutions that achieve state-of-the-art performance for infrared image SR in remote sensing scenarios. To reflect the characteristics of infrared data and practical application needs, the challenge adopts a single-track setting. A total of 115 participants registered for the competition, with 13 teams submitting valid entries. This report summarizes the challenge design, dataset, evaluation protocol, main results, and the representative methods of each team. The challenge serves as a benchmark to advance research in infrared image super-resolution and promote the development of effective solutions for real-world remote sensing applications.

cs.CV↗

arXiv2026

GridNet-HD: A High-Resolution Multi-Modal Dataset for LiDAR-Image Fusion on Power Line Infrastructure

This paper presents GridNet-HD, a multi-modal dataset for 3D semantic segmentation of overhead electrical infrastructures, pairing high-density LiDAR with high-resolution oblique imagery. The dataset comprises 7,694 images and 2.5 billion points annotated into 11 classes, with predefined splits and mIoU metrics. Unimodal (LiDAR-only, image-only) and multi-modal fusion baselines are provided. On GridNet-HD, fusion models outperform the best unimodal baseline by +5.55 mIoU, highlighting the complementarity of geometry and appearance. As reviewed in Sec. 2, no public dataset jointly provides high-density LiDAR and high-resolution oblique imagery with 3D semantic labels for power-line assets. Dataset, baselines, and codes are available: https://huggingface.co/collections/heig-vd-geo/gridnet-hd.

cs.CV↗

arXiv2026

Context-Aware Semantic Segmentation via Stage-Wise Attention

Semantic ultra-high-resolution (UHR) image segmentation is essential in remote sensing applications such as aerial mapping and environmental monitoring. Transformer-based models remain challenging in this setting because memory grows quadratically with the number of tokens, limiting either spatial resolution or contextual scope. We introduce CASWiT (Context-Aware Stage-Wise Transformer), a dual-branch Swin-based architecture that injects low-resolution contextual information into fine-grained high-resolution features through lightweight stage-wise cross-attention. To strengthen cross-scale learning, we also propose a SimMIM-style pretraining strategy based on masked reconstruction of the high-resolution image. Extensive experiments on the large-scale FLAIR-HUB aerial dataset demonstrate the effectiveness of CASWiT. Under our RGB-only UHR protocol, CASWiT reaches 66.37% mIoU with a SegFormer decoder, improving over strong RGB baselines while also improving boundary quality. On the URUR benchmark, CASWiT reaches 49.2% mIoU under the official evaluation protocol, and it also transfers effectively to medical UHR segmentation benchmarks. Code and pretrained models are available at https://huggingface.co/collections/heig-vd-geo/caswit

cs.CV↗

arXiv2025

Weakly-Supervised Learning for Tree Instances Segmentation in Airborne Lidar Point Clouds

Tree instance segmentation of airborne laser scanning (ALS) data is of utmost importance for forest monitoring, but remains challenging due to variations in the data caused by factors such as sensor resolution, vegetation state at acquisition time, terrain characteristics, etc. Moreover, obtaining a sufficient amount of precisely labeled data to train fully supervised instance segmentation methods is expensive. To address these challenges, we propose a weakly supervised approach where labels of an initial segmentation result obtained either by a non-finetuned model or a closed form algorithm are provided as a quality rating by a human operator. The labels produced during the quality assessment are then used to train a rating model, whose task is to classify a segmentation output into the same classes as specified by the human operator. Finally, the segmentation model is finetuned using feedback from the rating model. This in turn improves the original segmentation model by 34\% in terms of correctly identified tree instances while considerably reducing the number of non-tree instances predicted. Challenges still remain in data over sparsely forested regions characterized by small trees (less than two meters in height) or within complex surroundings containing shrubs, boulders, etc. which can be confused as trees where the performance of the proposed method is reduced.

cs.CV↗

arXiv2025

A Data-Centric Approach to 3D Semantic Segmentation of Railway Scenes

LiDAR-based semantic segmentation is critical for autonomous trains, requiring accurate predictions across varying distances. This paper introduces two targeted data augmentation methods designed to improve segmentation performance on the railway-specific OSDaR23 dataset. The person instance pasting method enhances segmentation of pedestrians at distant ranges by injecting realistic variations into the dataset. The track sparsification method redistributes point density in LiDAR scans, improving track segmentation at far distances with minimal impact on close-range accuracy. Both methods are evaluated using a state-of-the-art 3D semantic segmentation network, demonstrating significant improvements in distant-range performance while maintaining robustness in close-range predictions. We establish the first 3D semantic segmentation benchmark for OSDaR23, demonstrating the potential of data-centric approaches to address railway-specific challenges in autonomous train perception.

cs.CV↗

arXiv2024

In Flight Boresight Rectification for Lightweight Airborne Pushbroom Imaging Spectrometry

Hyperspectral cameras have recently been miniaturized for operation on lightweight airborne platforms such as UAV or small aircraft. Unlike frame cameras (RGB or Multispectral), many hyperspectral sensors use a linear array or 'push-broom' scanning design. This design presents significant challenges for image rectification and the calibration of the intrinsic and extrinsic camera parameters. Typically, methods employed to address such tasks rely on a precise GPS/INS estimate of the airborne platform trajectory and a detailed terrain model. However, inaccuracies in the trajectory or surface model information can introduce systematic errors and complicate geometric modeling which ultimately degrade the quality of the rectification. To overcome these challenges, we propose a method for tie point extraction and camera calibration for 'push-broom' hyperspectral sensors using only the raw spectral imagery and raw, possibly low quality, GPS/INS trajectory. We demonstrate that our approach allows for the automatic calibration of airborne systems with hyperspectral cameras, outperforms other state-of-the-art automatic rectification methods and reaches an accuracy on par with manual calibration methods.

cs.CV↗

arXiv2022

LiDAR Point--to--point Correspondences for Rigorous Registration of Kinematic Scanning in Dynamic Networks

With the objective of improving the registration of LiDAR point clouds produced by kinematic scanning systems, we propose a novel trajectory adjustment procedure that leverages on the automated extraction of selected reliable 3D point--to--point correspondences between overlapping point clouds and their joint integration (adjustment) together with all raw inertial and GNSS observations. This is performed in a tightly coupled fashion using a Dynamic Network approach that results in an optimally compensated trajectory through modeling of errors at the sensor, rather than the trajectory, level. The 3D correspondences are formulated as static conditions within this network and the registered point cloud is generated with higher accuracy utilizing the corrected trajectory and possibly other parameters determined within the adjustment. We first describe the method for selecting correspondences and how they are inserted into the Dynamic Network as new observation models. We then describe the experiments conducted to evaluate the performance of the proposed framework in practical airborne laser scanning scenarios with low-cost MEMS inertial sensors. In the conducted experiments, the method proposed to establish 3D correspondences is effective in determining point--to--point matches across a wide range of geometries such as trees, buildings and cars. Our results demonstrate that the method improves the point cloud registration accuracy, that is otherwise strongly affected by errors in the determined platform attitude or position (in nominal and emulated GNSS outage conditions), and possibly determine unknown boresight angles using only a fraction of the total number of 3D correspondences that are established.

cs.RO↗

arXiv2019

Wavelet-Based Moment-Matching Techniques for Inertial Sensor Calibration

The task of inertial sensor calibration has required the development of various techniques to take into account the sources of measurement error coming from such devices. The calibration of the stochastic errors of these sensors has been the focus of increasing amount of research in which the method of reference has been the so-called "Allan variance slope method" which, in addition to not having appropriate statistical properties, requires a subjective input which makes it prone to mistakes. To overcome this, recent research has started proposing "automatic" approaches where the parameters of the probabilistic models underlying the error signals are estimated by matching functions of the Allan variance or Wavelet Variance with their model-implied counterparts. However, given the increased use of such techniques, there has been no study or clear direction for practitioners on which approach is optimal for the purpose of sensor calibration. This paper formally defines the class of estimators based on this technique and puts forward theoretical and applied results that, comparing with estimators in this class, suggest the use of the Generalized Method of Wavelet Moments as an optimal choice.

stat.ME↗