arXiv subjects

Jan-Michael Schmalhorst

Publications and source records attributed to Jan-Michael Schmalhorst.

At least 19 recordsLinked to original sources

arXiv2021

Unidirectional spin Hall magnetoresistance and spin-orbit torques in HM$_1$/Co/HM$_2$ trilayer systems

We present a detailed analysis of harmonic longitudinal and Hall voltage measurements for in-plane magnetized Pt/Co/Ta and Ta/Co/Pt trilayers in reference to Pt/Co and Ta/Co bilayers. Enhancement of spin-orbit torques (SOTs) and unidirectional spin Hall magnetoresistance (USMR) is achieved by introducing the second heavy metal (HM) with the opposite sign of the spin Hall angle. The extracted SOT efficiencies are larger for the trilayers as compared to the bilayers, confirming the enhanced values reported for the trilayers with perpendicularly magnetized Co. The maximum effective spin Hall angle found for the Pt/Co/Ta trilayer reaches $θ_{SH}$ = 20%. The USMR of the trilayer yields up to 27% higher effect as for the respective bilayers with the largest effective USMR amplitude of -0.32 $\times$ 10$^{-5}$ for the Pt/Co/Ta trilayer at a charge current density of 10$^{7}$ A/cm$^2$.

cond-mat.mes-hall↗

arXiv2020

Sub-Nanosecond Spin-Transfer Torque in an Ensemble of Superparamagnetic-Like Nanomagnets

Spin currents can exert spin-transfer torques on magnetic systems even in the limit of vanishingly small net magnetization, as is the case for antiferromagnets. Here, we experimentally show that a spin-transfer torque is operative in a material with weak, short-range magnetic order -- namely, a macroscopic ensemble of superparamagnetic-like Co nanomagnets. We employ element- and time-resolved X-ray ferromagnetic resonance (XFMR) spectroscopy to directly detect sub-ns dynamics of the Co nanomagnets, excited into precession with cone angle $\geq$0.003$^{\circ}$ by an oscillating spin current. XFMR measurements reveal that as the net moment of the ensemble decreases, the strength of the spin-transfer torque increases relative to those of magnetic field torques. Our findings point to spin-transfer torque as an effective way to manipulate the state of nanomagnet ensembles at sub-ns timescales.

cond-mat.mes-hall↗

arXiv2019

Resistive contribution in electrical switching experiments with antiferromagnets

Recent research demonstrated the electrical switching of antiferromagnets via intrinsic spin-orbit torque or the spin Hall effect of an adjacent heavy metal layer. The electrical readout is typically realized by measuring the transverse anisotropic magnetoresistance at planar cross- or star-shaped devices with four or eight arms, respectively. Depending on the material, the current density necessary to switch the magnetic state can be large, often close to the destruction threshold of the device. We demonstrate that the resulting electrical stress changes the film resistivity locally and thereby breaks the fourfold rotational symmetry of the conductor. This symmetry breaking due to film inhomogeneity produces signals, that resemble the anisotropic magnetoresistance and is experimentally seen as a "saw-tooth"-shaped transverse resistivity. This artifact can persist over many repeats of the switching experiment and is not easily separable from the magnetic contribution. We discuss the origin of the artifact, elucidate the role of the film crystallinity, and propose approaches how to separate the resistive contribution from the magnetic contribution.

cond-mat.mtrl-sci↗

arXiv2019

Electrical Néel-order switching in magnetron-sputtered CuMnAs thin films

Antiferromagnetic materials as active components in spintronic devices promise insensitivity against external magnetic fields, the absence of own magnetic stray fields, and ultrafast dynamics at the picosecond time scale. Materials with certain crystal-symmetry show an intrinsic Néel-order spin-orbit torque that can efficiently switch the magnetic order of an antiferromagnet. The tetragonal variant of CuMnAs was shown to be electrically switchable by this intrinsic spin-orbit effect and its use in memory cells with memristive properties has been recently demonstrated for high-quality films grown with molecular beam epitaxy. Here, we demonstrate that the magnetic order of magnetron-sputtered CuMnAs films can also be manipulated by electrical current pulses. The switching efficiency and relaxation as a function of temperature, current density, and pulse width can be described by a thermal-activation model. Our findings demonstrate that CuMnAs can be fabricated with an industry-compatible deposition technique, which will accelerate the development cycle of devices based on this remarkable material.

cond-mat.mtrl-sci↗

arXiv2018

Correlation of tunnel magnetoresistance with the magnetic properties in perpendicular CoFeB-based junctions with exchange bias

We investigate the dependence of magnetic properties on the post-annealing temperature/time, the thickness of soft ferromagnetic electrode and Ta dusting layer in the pinned electrode as well as their correlation with the tunnel magnetoresistance ratio, in a series of perpendicular magnetic tunnel junctions of materials sequence Ta/Pd/IrMn/CoFe/Ta$(\textit{x})$/CoFeB/MgO$(\textit{y})$/CoFeB$(\textit{z})$/Ta/Pd. We obtain a large perpendicular exchange bias of 79.6$\,$kA/m for $x=0.3\,$nm. For stacks with $z=1.05\,$nm, the magnetic properties of the soft electrode resemble the characteristics of superparamagnetism. For stacks with $x=0.4\,$nm, $y=2\,$nm, and $z=1.20\,$nm, the exchange bias presents a significant decrease at post annealing temperature $T_\textrm{ann}=330\,^{\circ}$C for 60 min, while the interlayer exchange coupling and the saturation magnetization per unit area sharply decay at $T_\textrm{ann}=340\,^{\circ}$C for 60 min. Simultaneously, the tunnel magnetoresistance ratio shows a peak of $65.5\%$ after being annealed at $T_\textrm{ann}=300\,^{\circ}$C for 60 min, with a significant reduction down to $10\%$ for higher annealing temperatures ($T_\textrm{ann}\geq330\,^{\circ}$C) and down to $14\%$ for longer annealing times ($T_\textrm{ann}=300\,^{\circ}$C for 90 min). We attribute the large decrease of tunnel magnetoresistance ratio to the loss of exchange bias in the pinned electrode.

cond-mat.mtrl-sci↗

arXiv2017

Tunneling magnetoresistance of perpendicular CoFeB-based junctions with exchange bias

Recently, magnetic tunnel junctions with perpendicular magnetized electrodes combined with exchange bias films have attracted large interest. In this paper we examine the tunnel magnetoresistance of Ta/Pd/IrMn/Co-Fe/Ta/Co-Fe-B/MgO/Co-Fe-B/capping/Pd magnetic tunnel junctions in dependence on the capping layer, i.e., Hf or Ta. In these stacks perpendicular exchange bias fields of -500\,Oe along with perpendicular magnetic anisotropy are combined. A tunnel magnetoresistance of $(47.2\pm 1.4)\%$ for the Hf-capped sample was determined compared to the Ta one $(42.6\pm 0.7)\%$ at room temperature. Interestingly, this observation is correlated to the higher boron absorption of Hf compared to Ta which prevents the suppression of $Δ_{\textrm{1}}$ channel and leads to higher tunnel magnetoresistance values. Furthermore, the temperature dependent coercivities of the soft electrodes of both samples are mainly described by the Stoner-Wohlfarth model including thermal fluctuations. Slight deviations at low temperatures can be attributed to a torque on the soft electrode that is generated by the pinned magnetic layer system.

cond-mat.mtrl-sci↗

arXiv2017

Electrical transport and optical band gap of NiFe$_\textrm{2}$O$_\textrm{x}$ thin films

We fabricated NiFe$_\textrm{2}$O$_\textrm{x}$ thin films on MgAl$_2$O$_4$(001) substrates by reactive dc magnetron co-sputtering varying the oxygen partial pressure during deposition. The fabrication of a variable material with oxygen deficiency leads to controllable electrical and optical properties which would be beneficial for the investigations of the transport phenomena and would, therefore, promote the use of such materials in spintronic and spin caloritronic applications. We used several characterization techniques in order to investigate the film properties, focusing on their structural, magnetic, electrical, and optical properties. From the electrical resistivity measurements we obtained the conduction mechanisms that govern the systems in high and low temperature regimes, extracting low thermal activation energies which unveil extrinsic transport mechanisms. The thermal activation energy decreases in the less oxidized samples revealing the pronounced contribution of a large amount of electronic states localized in the band gap to the electrical conductivity. Hall effect measurements showed the mixed-type semiconducting character of our films. The optical band gaps were determined via ultraviolet-visible spectroscopy. They follow a similar trend as the thermal activation energy, with lower band gap values in the less oxidized samples.

physics.app-ph↗

arXiv2017

Proximity-induced superconductivity and quantum interference in topological crystalline insulator SnTe thin film devices

Topological crystalline insulators represent a new state of matter, in which the electronic transport is governed by mirror-symmetry protected Dirac surface states. Due to the helical spin-polarization of these surface states, the proximity of topological crystalline matter to a nearby superconductor is predicted to induce unconventional superconductivity and thus to host Majorana physics. We report on the preparation and characterization of Nb-based superconducting quantum interference devices patterned on top of topological crystalline insulator SnTe thin films. The SnTe films show weak antilocalization and the weak links of the SQUID fully-gapped proximity induced superconductivity. Both properties give a coinciding coherence length of 120 nm. The SQUID oscillations induced by a magnetic field show 2$π$ periodicity, possibly dominated by the bulk conductivity.

cond-mat.mes-hall↗

arXiv2017

Quantitative disentanglement of spin Seebeck, proximity-induced and intrinsic anomalous Nernst effect in NM/FM bilayers

We identify and investigate thermal spin transport phenomena in sputter-deposited Pt/NiFe$_2$O$_{\textrm{4-x}}$ ($4\geq x \geq 0$) bilayers. We separate the voltage generated by the spin Seebeck effect from the anomalous Nernst effect contributions and even disentangle the intrinsic anomalous Nernst effect (ANE) in the ferromagnet (FM) from the ANE produced by the Pt that is spin polarized due to its proximity to the FM. Further, we probe the dependence of these effects on the electrical conductivity and the band gap energy of the FM film varying from nearly insulating NiFe$_2$O$_4$ to metallic Ni$_{33}$Fe$_{67}$. A proximity-induced ANE could only be identified in the metallic Pt/Ni$_{33}$Fe$_{67}$ bilayer in contrast to Pt/NiFe$_2$O$_{\rm x}$ ($x>0$) samples. This is verified by the investigation of static magnetic proximity effects via x-ray resonant magnetic reflectivity.

cond-mat.mtrl-sci↗

arXiv2016

Co-sputtered PtMnSb thin films and PtMnSb/Pt bilayers for spin-orbit torque investigations

The manipulation of the magnetization by spin-orbit torques (SOTs) has recently been extensively studied due to its potential for efficiently writing information in magnetic memories. Particular attention is paid to non-centrosymmetric systems with space inversion asymmetry, where SOTs emerge even in single-layer materials. The half-metallic half-Heusler PtMnSb is an interesting candidate for studies of this intrinsic SOT. Here, we report on the growth and epitaxial properties of PtMnSb thin films and PtMnSb/Pt bilayers deposited on MgO(001) substrates by dc magnetron co-sputtering at high temperature in ultra-high vacuum. The film properties were investigated by x-ray diffraction, x-ray reflectivity, atomic force microscopy, and electron microscopy. Thin PtMnSb films present a monocrystalline C1b phase with (001) orientation, coexisting at increasing thickness with a polycrystalline phase with (111) texture. Films thinner than about 5 nm grow in islands, whereas thicker films grow layer-by-layer, forming a perfect MgO/PtMnSb interface. The thin PtMnSb/Pt bilayers also show island growth and a defective transition zone, while thicker films grow layer-by-layer and Pt grows epitaxially on the half-Heusler compound without significant interdiffusion.

cond-mat.mes-hall↗

arXiv2016

Quantitative separation of the anisotropic magnetothermopower and planar Nernst effect by the rotation of an in-plane thermal gradient

A thermal gradient as the driving force for spin currents plays a key role in spin caloritronics. In this field the spin Seebeck effect (SSE) is of major interest and was investigated in terms of in-plane thermal gradients inducing perpendicular spin currents (transverse SSE) and out-of-plane thermal gradients generating parallel spin currents (longitudinal SSE). Up to now all spincaloric experiments employ a spatially fixed thermal gradient. Thus anisotropic measurements with respect to well defined crystallographic directions were not possible. Here we introduce a new experiment that allows not only the in-plane rotation of the external magnetic field, but also the rotation of an in-plane thermal gradient controlled by optical temperature detection. As a consequence, the anisotropic magnetothermopower and the planar Nernst effect in a permalloy thin film can be measured simultaneously and reveal a phase shift, that allows the quantitative separation of the thermopower, the anisotropic magnetothermopower and the planar Nernst effect.

cond-mat.mes-hall↗

arXiv2016

Structural, magnetic and electrical properties of sputter deposited Mn-Fe-Ga thin films

We investigated structural, magnetic and electrical properties of sputter deposited Mn-Fe-Ga compounds. The crystallinity of the Mn-Fe-Ga thin films was confirmed using x-ray diffraction. X-ray reflection and atomic force microscopy measurements were utilized to investigate the surface properties, roughness, thickness and density of the deposited Mn-Fe-Ga. Depending on the stoichiometry, as well as the used substrates (SrTiO3 (001) and MgO (001)) or buffer layer (TiN) the Mn-Fe-Ga crystallizes in the cubic or the tetragonally distorted phase. Anomalous Hall effect and alternating gradient magnetometry measurements confirmed strong perpendicular magnetocrystalline anisotropy. Low saturation magnetization and hard magnetic behavior was reached by tuning the composition. Temperature dependent anomalous Hall effect measurements in a closed cycle He-cryostat showed a slight increase in coercivity with decreasing temperature (300K to 2K). TiN buffered Mn2.7Fe0.3Ga revealed sharper switching of the magnetization compared to the unbuffered layers.

cond-mat.mtrl-sci↗

arXiv2016

Comparison of laser induced and intrinsic tunnel magneto-Seebeck effect in CoFeB/MgAl$_2$O$_4$ and CoFeB/MgO magnetic tunnel junctions

We present a comparison of the tunnel magneto-Seebeck effect for laser induced and intrinsic heating. Therefore, Co$_{40}$Fe$_{40}$B$_{20}$/MgAl$_2$O$_4$ and Co$_{25}$Fe$_{55}$B$_{20}$/MgO magnetic tunnel junctions have been prepared. The TMS ratio of 3\,\% in case of the MAO MTJ agrees well with ratios found for other barrier materials, while the TMS ratio of 23\,\% of the MgO MTJ emphasizes the influence of the CoFe composition. We find results using the intrinsic method that differ in sign and magnitude in comparison to the results of the laser heating. The intrinsic contributions can alternatively be explained by the Brinkman model and the given junction properties. Especially, we are able to demonstrate that the symmetric contribution is solely influenced by the barrier asymmetry. Thus, we conclude that the symmetry analysis used for the intrinsic method is not suitable to unambiguously identify an intrinsic tunnel magneto-Seebeck effect.

cond-mat.mtrl-sci↗

arXiv2016

Low Gilbert damping in Co2FeSi and Fe2CoSi films

Thin highly textured Fe$_{\mathrm{1+x}}$Co$_{\mathrm{2-x}}$Si ($0 \leq$ x $\leq 1$) films were prepared on MgO (001) substrates by magnetron co-sputtering. The magneto-optic Kerr effect (MOKE) and ferromagnetic resonance (FMR) measurements were used to investigate the composition dependence of the magnetization, the magnetic anisotropy, the gyromagnetic ratio and the relaxation of the films. The effective magnetization for the thin Fe$_{\mathrm{1+x}}$Co$_{\mathrm{2-x}}$Si films, determined by FMR measurements, are consistent with the Slater Pauling prediction. Both MOKE and FMR measurements reveal a pronounced fourfold anisotropy distribution for all films. In addition we found a strong influence of the stoichiometry on the anisotropy as the cubic anisotropy strongly increases with increasing Fe concentration. The gyromagnetic ratio is only weakly dependent on the composition. We find low Gilbert damping parameters for all films with values down to $0.0012\pm0.00012$ for Fe$_{1.75}$Co$_{1.25}$Si. The effective damping parameter for Co$_2$FeSi is found to be $0.0018\pm 0.0004$. We also find a pronounced anisotropic relaxation, which indicates significant contributions of two-magnon scattering processes that is strongest along the easy axes of the films. This makes thin Fe$_{\mathrm{1+x}}$Co$_{\mathrm{2-x}}$Si films ideal materials for the application in STT-MRAM devices.

cond-mat.mtrl-sci↗

arXiv2016

Static Magnetic Proximity Effect in Pt Layers on Sputter-Deposited NiFe2O4 and on Fe of Various Thicknesses Investigated by XRMR

The longitudinal spin Seebeck effect is detected in sputter-deposited NiFe2O4 films using Pt as a spin detector and compared to previously investigated NiFe2O4 films prepared by chemical vapor deposition. Anomalous Nernst effects induced by the magnetic proximity effect in Pt can be excluded for the sputter-deposited NiFe2O4 films down to a certain limit, since x-ray resonant magnetic reflectivity measurements show no magnetic response down to a limit of 0.04 μB per Pt atom comparable to the case of the chemicallydeposited NiFe2O4 films. These differently prepared films have various thicknesses. Therefore, we further studied Pt/Fe reference samples with various Fe thicknesses and could confirm that the magnetic proximity effect is only induced by the interface properties of the magnetic material.

cond-mat.mes-hall↗

arXiv2016

Titanium Nitride as a Seed Layer for Heusler Compounds

Titanium nitride (TiN) shows low resistivity at room temperature, high thermal stability and thus has the potential to serve as seed layer in magnetic tunnel junctions. High quality TiN thin films with regard to the crystallographic and electrical properties were grown and characterized by X-ray diffraction and 4-terminal transport measurements. Element specific X-ray absorption spectroscopy revealed pure TiN in the bulk. To investigate the influence of a TiN seed layer on a ferro(i)magnetic bottom electrode, an out-of-plane magnetized Mn2.45Ga as well as in- and out-of-plane magnetized Co2FeAl thin films were deposited on a TiN buffer, respectively. The magnetic properties were investigated using a superconducting quantum interference device (SQUID) and anomalous Hall effect (AHE) for Mn2.45Ga. Magneto optical Kerr effect (MOKE) measurements were carried out to investigate the magnetic properties of Co2FeAl. TiN buffered Mn2.45Ga thin films showed higher coercivity and squareness ratio compared to unbuffered samples. The Heusler compound Co2FeAl showed already good crystallinity when grown at room temperature.

cond-mat.mtrl-sci↗

arXiv2016

Detection of DC currents and resistance measurements in longitudinal spin Seebeck effect experiments on Pt/YIG and Pt/NFO

In this work we investigated thin films of the ferrimagnetic insulators YIG and NFO capped with thin Pt layers in terms of the longitudinal spin Seebeck effect (LSSE). The electric response detected in the Pt layer under an out-of-plane temperature gradient can be interpreted as a pure spin current converted into a charge current via the inverse spin Hall effect. Typically, the transverse voltage is the quantity investigated in LSSE measurements (in the range of μV). Here, we present the directly detected DC current (in the range of nA) as an alternative quantity. Furthermore, we investigate the resistance of the Pt layer in the LSSE configuration. We found an influence of the test current on the resistance. The typical shape of the LSSE curve varies for increasing test currents.

cond-mat.mtrl-sci↗

arXiv2015

Room temperature exchange bias in BiFeO3 / Co-Fe bilayers

Thin highly epitaxial BiFeO$_3$ films were prepared on SrTiO$_3$ (100) substrates by reactive magnetron co-sputtering. Detailed MOKE measurements on BiFeO$_3$/Co-Fe bilayers were performed to investigate the exchange bias as a function of the films thicknesses and Co-Fe stoichiometries. We found a maximum exchange bias of H$_{\mathrm{eb}}$=92 Oe and a coercive field of H$_{\mathrm{c}}$=89 Oe for a 12.5 nm thick BiFeO$_3$ film with a 2 nm thick Co layer. The unidirectional anisotropy is clearly visible in in-plane rotational MOKE measurements. AMR measurements reveal a strongly increasing coercivity with decreasing temperature, but no significant change in the exchange bias field.

cond-mat.mtrl-sci↗