arXiv subjects

Jan-Willem van Wingerden

Publications and source records attributed to Jan-Willem van Wingerden.

At least 37 records · Page 2Linked to original sources

arXiv2021

Periodic Load Rejection for Floating Offshore Wind Turbines via Constrained Subspace Predictive Repetitive Control

Individual Pitch Control (IPC) is an effective control strategy to mitigate the blade loads on large-scale wind turbines. Since IPC usually requires high pitch actuation, the safety constraints of the pitch actuator should be taken into account when designing the controller. This paper introduces a constrained Subspace Predictive Repetitive Control (SPRC) approach, which considers the limitation of blade pitch angle and pitch rate. To fulfill this goal, a model predictive control scheme is implemented in the fully data-driven SPRC approach to incorporate the physical limitations of the pitch actuator in the control problem formulation. An optimal control law subjected to constraints is then formulated so that future constraint violations are anticipated and prevented. Case studies show that the developed constrained SPRC reduces the pitch activities necessary to mitigate the blade loads when experiencing wind turbulence and abrupt wind gusts. More importantly, the approach allows the wind farm operator to design conservative bounds for the pitch actuator constraints that satisfies safety limitations, design specifications and physical restrictions. This will help to alleviate the cyclic fatigue loads on the actuators, increase the structural reliability and extend the lifespan of the pitch control system.

eess.SY↗

arXiv2021

Active Power Control of Waked Wind Farms: Compensation of Turbine Saturation and Thrust Force Balance

Active power control regulates the total power generated by wind farms with the power consumed on the electricity grid. Due to wake effects, the available power is reduced and turbulence is increased at downstream wind turbines. Such effects lead to a design challenge for wind farm control, where the delicate balance between supply and demand should be maintained, while considering the load balancing in the wind turbine structures. We propose a control architecture based on simple feedback controllers that adjusts the demanded power set points of individual wind turbines to compensate for turbine saturations and to balance thrust forces. For compensation purposes, the dynamics of power tracking in the wind turbines is approximated as a pure time-delay process, and the thrust force balance design is based on an identified linear model of the turbines. In this paper, we show that the proposed control architecture allows the generated power to track its reference even when turbines saturate, while the thrust forces are balanced. In addition, the result shows that the proposed power dispatch strategy, which considers thrust force balance, also avoids turbine saturation, being thus beneficial for energy production. The effectiveness of the proposed feedback controller is demonstrated using high-fidelity computational fluid dynamics simulations of a small wind farm.

eess.SY↗

arXiv2021

Blade Effective Wind Speed Estimation: A Subspace Predictive Repetitive Estimator Approach

Modern wind turbine control algorithms typically utilize rotor effective wind speed measured from an anemometer on the turbine's nacelle. Unfortunately, the measured wind speed from such a single measurement point does not give a good representation of the effective wind speed over the blades, as it does not take the varying wind condition within the entire rotor area into account. As such, Blade Effective Wind Speed (BEWS) estimation can be seen as a more accurate alternative. This paper introduces a novel Subspace Predictive Repetitive Estimator (SPRE) approach to estimate the BEWS using blade load measurements. In detail, the azimuth-dependent cone coefficient is firstly formulated to describe the mapping between the out-of-plane blade root bending moment and the wind speed over blades. Then, the SPRE scheme, which is inspired by Subspace Predictive Repetitive Control (SPRC), is proposed to estimate the BEWS. Case studies exhibit the proposed method's effectiveness at predicting BEWS and identifying wind shear in varying wind speed conditions. Moreover, this novel technique enables complicated wind inflow conditions, where a rotor is impinged and overlapped by wake shed from an upstream turbine, to be estimated.

eess.SY↗

arXiv2020

Fault-Tolerant Individual Pitch Control of Floating Offshore Wind Turbines via Subspace Predictive Repetitive Control

Individual Pitch Control (IPC) is an effective and widely-used strategy to mitigate blade loads in wind turbines. However, conventional IPC fails to cope with blade and actuator faults, and this situation may lead to an emergency shutdown and increased maintenance costs. In this paper, a Fault-Tolerant Individual Pitch Control (FTIPC) scheme is developed to accommodate these faults in Floating Offshore Wind Turbines (FOWTs), based on a Subspace Predictive Repetitive Control (SPRC) approach. To fulfill this goal, an online subspace identification paradigm is implemented to derive a linear approximation of the FOWT system dynamics. Then, a repetitive control law is formulated to attain load mitigation under operational conditions, both in healthy and faulty conditions. Since the excitation noise used for the online subspace identification may interfere with the nominal power generation of the wind turbine, a novel excitation technique is developed to restrict excitation at specific frequencies. Results show that significant load reductions are achieved by FTIPC, while effectively accommodating blade and actuator faults and while restricting the energy of the persistently exciting control action.

eess.SY↗

arXiv2020

Fast Adaptive Fault Accommodation in Floating Offshore Wind Turbines via Model-Based Fault Diagnosis and Subspace Predictive Repetitive Control

As Floating Offshore Wind Turbines (FOWTs) operate in deep waters and are subjected to stressful wind and wave induced loads, they are more prone than onshore counterparts to experience faults and failure. In particular, the pitch system may experience Pitch Actuator Stuck (PAS) type of faults, which will result in a complete loss of control authority. In this paper, a novel fast and adaptive solution is developed by integrating a model-based Fault Diagnosis (FD) scheme and the Subspace Predictive Repetitive Control (SPRC). The FD role is to quickly detect and isolate the failed pitch actuator. Based on the fault isolation results, a pre-tuned adaptive SPRC is switched online in place of the existing one, whose initial values of the parameters has been tuned offline to match the specific faulty case. After that, SPRC employs subspace identification to continuously identify a linear model of the wind turbine over a moving time window, and thereby formulate an adaptive control law to alleviate the PAS-induced loads. Results show that the developed architecture allows to achieve a considerable reduction of the PAS-induced blade loads. More importantly, the time needed to reduce the PAS-induced loads are significantly shortened, thus avoiding further damage to other components during the adaption time and allowing continued power generation.

eess.SY↗

arXiv2020

Adaptive Feedforward Control For Reset Feedback Control Systems -- Application in Precision Motion Control

This paper presents a novel adaptive feedforward controller design for reset control systems. The combination of feedforward and reset feedback control promises high performance as the feedforward guarantees reference tracking, while the non-linear feedback element rejects disturbances. To overcome inevitable model mismatches, the feedforward controller adapts to increase precision in reference tracking. Where linear existing adaptive feedforward controllers do not guarantee convergence in the presence of reset, this work presents a novel adaptive law based on converging and diverging regions of adaptation to achieve good tracking. Experimental results demonstrate the claimed advantage of the novel method.

eess.SY↗

arXiv2020

Fault Diagnosis of the 10MW Floating Offshore Wind Turbine Benchmark: a Mixed Model and Signal-based Approach

Floating Offshore Wind Turbines (FOWTs) operate in the harsh marine environment with limited accessibility and maintainability. Not only failures are more likely to occur than in land-based turbines, but also corrective maintenance is more expensive. In the present study, a mixed model and signal-based Fault Diagnosis (FD) architecture is developed to detect and isolate critical faults in FOWTs. More specifically, a model-based scheme is developed to detect and isolate the faults associated with the turbine system. It is based on a fault detection and approximation estimator and fault isolation estimators, with time-varying adaptive thresholds to guarantee against false-alarms. In addition, a signal-based scheme is established, within the proposed architecture, for detecting and isolating two representative mooring lines faults. For the purpose of verification, a 10MW FOWT benchmark is developed and its operating conditions, which contains predefined faults, are simulated by extending the high-fidelity simulator. Based on it, the effectiveness of the proposed architecture is illustrated. In addition, the advantages and limitations are discussed by comparing its fault detection to the results delivered by other approaches. Results show that the proposed architecture has the best performance in detecting and isolating the critical faults in FOWTs under diverse operating conditions.

eess.SY↗

arXiv2020

Fault Detection of the Mooring system in Floating Offshore Wind Turbines based on the Wave-excited Linear Model

Floating Offshore Wind Turbines (FOWTs) are more prone to suffer from faults and failures than bottom-fixed counterparts due to the severe wind and wave loads typical of deep water sites. In particular, mooring line faults may lead to unacceptably high operation and maintenance costs due to the limited accessibility of FOWTs. Detecting the mooring line faults is therefore critical, but the application of Fault Detection (FD) techniques has not been investigated yet. In this paper, an FD scheme based on a wave-excited linear model is developed to detect in a reliable way critical mooring line faults occurring at the fairlead and anchor ends. To reach the goal, a linear model of the FOWT is obtained by approximating the wave radiation and incident wave forces. Based on this model, an observer is built to predict the rigid rotor and platform dynamics. The FD scheme is thus implemented by comparing the Mahalanobis Distance of the observer prediction error against a probabilistic detection threshold. Numerical simulations in some selected fault scenarios show that the wave-excited linear model can predict the FOWT dynamics with good accuracy. Based on this, the FD scheme capabilities are demonstrated, showing that it is able to effectively detect two critical mooring line faults.

eess.SY↗

arXiv2020

The helix approach: using dynamic individual pitch control to enhance wake mixing in wind farms

Wind farm control using dynamic concepts is a research topic that is receiving an increasing amount of interest. The main concept of this approach is that dynamic variations of the wind turbine control settings lead to higher wake turbulence, and subsequently faster wake recovery due to increased mixing. As a result, downstream turbines experience higher wind speeds, thus increasing their energy capture. The current state of the art in dynamic wind farm control is to vary the magnitude of the thrust force of an upstream turbine. Although very effective, this approach also leads to increased power and thrust variations, negatively impacting energy quality and fatigue loading. In this paper, a novel approach for the dynamic control of wind turbines in a wind farm is proposed: using individual pitch control, the fixed-frame tilt and yaw moments on the turbine are varied, thus dynamically manipulating the wake. This strategy is named the helix approach since the resulting wake has a helical shape. Large eddy simulations of a two-turbine wind farm show that the helix approach leads to enhanced wake mixing with minimal power and thrust variations.

eess.SY↗

arXiv2020

Feedforward control for wave disturbance rejection on floating offshore wind turbines

Floating offshore wind turbines allow wind energy to be harvested in deep waters. However, additional dynamics and structural loads may result when the floating platform is being excited by wind and waves. In this work, the conventional wind turbine controller is complemented with a novel linear feedforward controller based on wave measurements. The objective of the feedforward controller is to attenuate rotor speed variations caused by wave forcing. To design this controller, a linear model is developed that describes the system response to incident waves. The performance of the feedback-feedforward controller is assessed by a high-fidelity numerical tool using the DTU 10MW turbine and the INNWIND.EU TripleSpar platform as references. Simulations in the presence of irregular waves and turbulent wind show that the feedforward controller effectively compensates the wave-induced rotor oscillations. The novel controller is able to reduce the rotor speed variance by 26%. As a result, the remaining rotor speed variance is only 4% higher compared to operation in still water.

eess.SY↗

arXiv2020

Adaptation of Engineering Wake Models using Gaussian Process Regression and High-Fidelity Simulation Data

This article investigates the optimization of yaw control inputs of a nine-turbine wind farm. The wind farm is simulated using the high-fidelity simulator SOWFA. The optimization is performed with a modifier adaptation scheme based on Gaussian processes. Modifier adaptation corrects for the mismatch between plant and model and helps to converge to the actual plan optimum. In the case study the modifier adaptation approach is compared with the Bayesian optimization approach. Moreover, the use of two different covariance functions in the Gaussian process regression is discussed. Practical recommendations concerning the data preparation and application of the approach are given. It is shown that both the modifier adaptation and the Bayesian optimization approach can improve the power production with overall smaller yaw misalignments in comparison to the Gaussian wake model.

eess.SY↗

arXiv2020

On wind farm wake mixing strategies using dynamic individual pitch control

Dynamic wind farm control is a new strategy that aims to apply time-varying, often periodic, control signals on upstream wind turbines to increase the wake mixing behind the turbine. As a result, wake recovery is accelerated, leading to a higher power production of downstream turbines. As the amount of interest in dynamic control strategies for wind turbines in a wind farm is increasing, different approaches are being proposed. One such novel approach is called Dynamic Individual Pitch Control (DIPC). In DIPC, each blade pitch angle of a turbine is controlled independently to dynamically manipulate the direction of the thrust force vector exerted on the wind. Hence, the direction of the wake is varied, inducing wake mixing without significant thrust force magnitude variations on the rotor. In this paper, the effectiveness of different variations in the thrust direction are evaluated and compared using Large Eddy Simulation (LES) experiments.

eess.SY↗

arXiv2020

Predicting the benefit of wake steering on the annual energy production of a wind farm using large eddy simulations and Gaussian process regression

In recent years, wake steering has been established as a promising method to increase the energy yield of a wind farm. Current practice in estimating the benefit of wake steering on the annual energy production (AEP) consists of evaluating the wind farm with simplified surrogate models, casting a large uncertainty on the estimated benefit. This paper presents a framework for determining the benefit of wake steering on the AEP, incorporating simulation results from a surrogate model and large eddy simulations in order to reduce the uncertainty. Furthermore, a time-varying wind direction is considered for a better representation of the ambient conditions at the real wind farm site. Gaussian process regression is used to combine the two data sets into a single improved model of the energy gain. This model estimates a 0.60% gain in AEP for the considered wind farm, which is a 76% increase compared to the estimate of the surrogate model.

physics.flu-dyn↗

arXiv2020

Preventing wind turbine tower natural frequency excitation with a quasi-LPV model predictive control scheme

With the ever increasing power rates of wind turbines, more advanced control techniques are needed to facilitate tall towers that are low-weight and cost effective, but in effect more flexible. Such soft-soft tower configurations generally have their fundamental side-side frequency in the below-rated operational domain. Because the turbine rotor practically has or develops a mass imbalance over time, a periodic and rotor-speed dependent side-side excitation is present during below-rated operation. Persistent operation at the coinciding tower and rotational frequency degrades the expected structural life span. To reduce this effect, earlier work has shown the effectiveness of active tower damping control strategies using collective pitch control. A more passive approach is frequency skipping by inclusion of speed exclusion zones, which avoids prolonged operation near the critical frequency. However, neither of the methods incorporate a convenient way of performing a trade-off between energy maximization and fatigue load minimization. Therefore, this paper introduces a quasi-linear parameter varying model predictive control (qLPV-MPC) scheme, exploiting the beneficial (convex) properties of a qLPV system description. The qLPV model is obtained by a demodulation transformation, and is subsequently augmented with a simple wind turbine model. Results show the effectiveness of the algorithm in synthetic and realistic simulations using the NREL 5-MW reference wind turbine in high-fidelity simulation code. Prolonged rotor speed operation at the tower side-side natural frequency is prevented, whereas when the trade-off is in favor of energy production, the algorithm decides to rapidly pass over the natural frequency to attain higher rotor speeds and power productions.

eess.SY↗

arXiv2019

A tutorial on the synthesis and validation of a closed-loop wind farm controller using a steady-state surrogate model

In wind farms, wake interaction leads to losses in power capture and accelerated structural degradation when compared to freestanding turbines. One method to reduce wake losses is by misaligning the rotor with the incoming flow using its yaw actuator, thereby laterally deflecting the wake away from downstream turbines. However, this demands an accurate and computationally tractable model of the wind farm dynamics. This problem calls for a closed-loop solution. This tutorial paper fills the scientific gap by demonstrating the full closed-loop controller synthesis cycle using a steady-state surrogate model. Furthermore, a novel, computationally efficient and modular communication interface is presented that enables researchers to straight-forwardly test their control algorithms in large-eddy simulations. High-fidelity simulations of a 9-turbine farm show a power production increase of up to 11% using the proposed closed-loop controller compared to traditional, greedy wind farm operation.

eess.SY↗

arXiv2018

Data-driven repetitive control: Wind tunnel experiments under turbulent conditions

A commonly applied method to reduce the cost of wind energy, is alleviating the periodic loads on turbine blades using Individual Pitch Control (IPC). In this paper, a data-driven IPC methodology called Subspace Predictive Repetitive Control (SPRC) is employed. The effectiveness of SPRC will be demonstrated on a scaled 2-bladed wind turbine. An open-jet wind tunnel with an innovative active grid is employed to generate reproducible turbulent wind conditions. A significant load reduction with limited actuator duty is achieved even under these high turbulent conditions. Furthermore, it will be demonstrated that SPRC is able to adapt to changing operating conditions.

eess.SY↗

arXiv2018

Analysis and optimal individual pitch control decoupling by inclusion of an azimuth offset in the multi-blade coordinate transformation

With the trend of increasing wind turbine rotor diameters, the mitigation of blade fatigue loadings is of special interest to extend the turbine lifetime. Fatigue load reductions can be partly accomplished using Individual Pitch Control (IPC) facilitated by the so-called Multi-Blade Coordinate (MBC) transformation. This operation transforms and decouples the blade load signals in a yaw- and tilt-axis. However, in practical scenarios, the resulting transformed system still shows coupling between the axes, posing a need for more advanced Multiple-Input Multiple-Output (MIMO) control architectures. This paper presents a novel analysis and design framework for decoupling of the non-rotating axes by the inclusion of an azimuth offset in the reverse MBC transformation, enabling the application of simple Single-Input Single-Output (SISO) controllers. A thorough analysis is given by including the azimuth offset in a frequency-domain representation. The result is evaluated on simplified blade models, as well as linearizations obtained from the NREL~5\nobreakdash-MW reference wind turbine. A sensitivity and decoupling assessment justify the application of decentralized SISO control loops for IPC. Furthermore, closed-loop high-fidelity simulations show beneficial effects on pitch actuation and blade fatigue load reductions.

eess.SY↗

arXiv2017

System Identification through Online Sparse Gaussian Process Regression with Input Noise

There has been a growing interest in using non-parametric regression methods like Gaussian Process (GP) regression for system identification. GP regression does traditionally have three important downsides: (1) it is computationally intensive, (2) it cannot efficiently implement newly obtained measurements online, and (3) it cannot deal with stochastic (noisy) input points. In this paper we present an algorithm tackling all these three issues simultaneously. The resulting Sparse Online Noisy Input GP (SONIG) regression algorithm can incorporate new noisy measurements in constant runtime. A comparison has shown that it is more accurate than similar existing regression algorithms. When applied to non-linear black-box system modeling, its performance is competitive with existing non-linear ARX models.

stat.ML↗