arXiv subjects

Jane Cleland-Huang

Publications and source records attributed to Jane Cleland-Huang.

At least 37 records · Page 2Linked to original sources

arXiv2024

Towards Engineering Fair and Equitable Software Systems for Managing Low-Altitude Airspace Authorizations

Small Unmanned Aircraft Systems (sUAS) have gained widespread adoption across a diverse range of applications. This has introduced operational complexities within shared airspaces and an increase in reported incidents, raising safety concerns. In response, the U.S. Federal Aviation Administration (FAA) is developing a UAS Traffic Management (UTM) system to control access to airspace based on an sUAS's predicted ability to safely complete its mission. However, a fully automated system capable of swiftly approving or denying flight requests can be prone to bias and must consider safety, transparency, and fairness to diverse stakeholders. In this paper, we present an initial study that explores stakeholders' perspectives on factors that should be considered in an automated system. Results indicate flight characteristics and environmental conditions were perceived as most important but pilot and drone capabilities should also be considered. Further, several respondents indicated an aversion to any AI-supported automation, highlighting the need for full transparency in automated decision-making. Results provide a societal perspective on the challenges of automating UTM flight authorization decisions and help frame the ongoing design of a solution acceptable to the broader sUAS community.

cs.SE↗

arXiv2023

Leveraging Transformer-based Language Models to Automate Requirements Satisfaction Assessment

Requirements Satisfaction Assessment (RSA) evaluates whether the set of design elements linked to a single requirement provide sufficient coverage of that requirement -- typically meaning that all concepts in the requirement are addressed by at least one of the design elements. RSA is an important software engineering activity for systems with any form of hierarchical decomposition -- especially safety or mission critical ones. In previous studies, researchers used basic Information Retrieval (IR) models to decompose requirements and design elements into chunks, and then evaluated the extent to which chunks of design elements covered all chunks in the requirement. However, results had low accuracy because many critical concepts that extend across the entirety of the sentence were not well represented when the sentence was parsed into independent chunks. In this paper we leverage recent advances in natural language processing to deliver significantly more accurate results. We propose two major architectures: Satisfaction BERT (Sat-BERT), and Dual-Satisfaction BERT (DSat-BERT), along with their multitask learning variants to improve satisfaction assessments. We perform RSA on five different datasets and compare results from our variants against the chunk-based legacy approach. All BERT-based models significantly outperformed the legacy baseline, and Sat-BERT delivered the best results returning an average improvement of 124.75% in Mean Average Precision.

cs.SE↗

arXiv2023

Prompts Matter: Insights and Strategies for Prompt Engineering in Automated Software Traceability

Large Language Models (LLMs) have the potential to revolutionize automated traceability by overcoming the challenges faced by previous methods and introducing new possibilities. However, the optimal utilization of LLMs for automated traceability remains unclear. This paper explores the process of prompt engineering to extract link predictions from an LLM. We provide detailed insights into our approach for constructing effective prompts, offering our lessons learned. Additionally, we propose multiple strategies for leveraging LLMs to generate traceability links, improving upon previous zero-shot methods on the ranking of candidate links after prompt refinement. The primary objective of this paper is to inspire and assist future researchers and engineers by highlighting the process of constructing traceability prompts to effectively harness LLMs for advancing automatic traceability.

cs.SE↗

arXiv2023

Leveraging Traceability to Integrate Safety Analysis Artifacts into the Software Development Process

Safety-critical system's failure or malfunction can cause loss of human lives or damage to the physical environment; therefore, continuous safety assessment is crucial for such systems. In many domains this includes the use of Safety assurance cases (SACs) as a structured argument that the system is safe for use. SACs can be challenging to maintain during system evolution due to the disconnect between the safety analysis and system development process. Further, safety analysts often lack domain knowledge and tool support to evaluate the SAC. We propose a solution that leverages software traceability to connect relevant system artifacts to safety analysis models, and then uses these connections to visualize the change. We elicit design rationales for system changes to help safety stakeholders analyze the impact of system changes on safety. We present new traceability techniques for closer integration of the safety analysis and system development process, and illustrate the viability of our approach using examples from a cyber-physical system that deploys Unmanned Aerial Vehicles for emergency response.

cs.SE↗

arXiv2023

A Requirements-Driven Platform for Validating Field Operations of Small Uncrewed Aerial Vehicles

Flight-time failures of small Uncrewed Aerial Systems (sUAS) can have a severe impact on people or the environment. Therefore, sUAS applications must be thoroughly evaluated and tested to ensure their adherence to specified requirements, and safe behavior under real-world conditions, such as poor weather, wireless interference, and satellite failure. However, current simulation environments for autonomous vehicles, including sUAS, provide limited support for validating their behavior in diverse environmental contexts and moreover, lack a test harness to facilitate structured testing based on system-level requirements. We address these shortcomings by eliciting and specifying requirements for an sUAS testing and simulation platform, and developing and deploying it. The constructed platform, DroneReqValidator (DRV), allows sUAS developers to define the operating context, configure multi-sUAS mission requirements, specify safety properties, and deploy their own custom sUAS applications in a high-fidelity 3D environment. The DRV Monitoring system collects runtime data from sUAS and the environment, analyzes compliance with safety properties, and captures violations. We report on two case studies in which we used our platform prior to real-world sUAS deployments, in order to evaluate sUAS mission behavior in various environmental contexts. Furthermore, we conducted a study with developers and found that DRV simplifies the process of specifying requirements-driven test scenarios and analyzing acceptance test results

cs.SE↗

arXiv2023

Understanding the Challenges of Deploying Live-Traceability Solutions

Software traceability is the process of establishing and maintaining relationships between artifacts in a software system. This process is crucial to many engineering processes, particularly for safety critical projects; however, it is labor-intensive and error-prone. Automated traceability has been a long awaited tool for project managers of these systems, and due to the semantic similarities between linked artifacts, NLP techniques, such as transformer models, may be leveraged to accomplish this task. SAFA.ai is a startup focusing on fine-tuning project-specific models that deliver automated traceability in a near real-time environment. The following paper describes the challenges that characterize commercializing software traceability and highlights possible future directions.

cs.SE↗

arXiv2022

RESAM: Requirements Elicitation and Specification for Deep-Learning Anomaly Models with Applications to UAV Flight Controllers

CyberPhysical systems (CPS) must be closely monitored to identify and potentially mitigate emergent problems that arise during their routine operations. However, the multivariate time-series data which they typically produce can be complex to understand and analyze. While formal product documentation often provides example data plots with diagnostic suggestions, the sheer diversity of attributes, critical thresholds, and data interactions can be overwhelming to non-experts who subsequently seek help from discussion forums to interpret their data logs. Deep learning models, such as Long Short-term memory (LSTM) networks can be used to automate these tasks and to provide clear explanations of diverse anomalies detected in real-time multivariate data-streams. In this paper we present RESAM, a requirements process that integrates knowledge from domain experts, discussion forums, and formal product documentation, to discover and specify requirements and design definitions in the form of time-series attributes that contribute to the construction of effective deep learning anomaly detectors. We present a case-study based on a flight control system for small Uncrewed Aerial Systems and demonstrate that its use guides the construction of effective anomaly detection models whilst also providing underlying support for explainability. RESAM is relevant to domains in which open or closed online forums provide discussion support for log analysis.

cs.SE↗

arXiv2022

Enhancing Automated Software Traceability by Transfer Learning from Open-World Data

Software requirements traceability is a critical component of the software engineering process, enabling activities such as requirements validation, compliance verification, and safety assurance. However, the cost and effort of manually creating a complete set of trace links across natural language artifacts such as requirements, design, and test-cases can be prohibitively expensive. Researchers have therefore proposed automated link-generation solutions primarily based on information-retrieval (IR) techniques; however, these solutions have failed to deliver the accuracy needed for full adoption in industrial projects. Improvements can be achieved using deep-learning traceability models; however, their efficacy is impeded by the limited size and availability of project-level artifacts and links to serve as training data. In this paper, we address this problem by proposing and evaluating several deep-learning approaches for text-to-text traceability. Our method, named NLTrace, explores three transfer learning strategies that use datasets mined from open world platforms. Through pretraining Language Models (LMs) and leveraging adjacent tracing tasks, we demonstrate that NLTrace can significantly improve the performance of LM based trace models when training links are available. In such scenarios NLTrace outperforms the best performing classical IR method with an 188% improvement in F2 score and 94.01% in Mean Average Precision (MAP). It also outperforms the general LM based trace model by 7% and 23% for F2 and MAP respectively. In addition, NLTrace can adapt to low-resource tracing scenarios where other LM models can not. The knowledge learned from adjacent tasks enables NLTrace to outperform VSM models by 28% F2 on generation challenges when presented with a small number of training examples.

cs.SE↗

arXiv2022

Generating and Visualizing Trace Link Explanations

Recent breakthroughs in deep-learning (DL) approaches have resulted in the dynamic generation of trace links that are far more accurate than was previously possible. However, DL-generated links lack clear explanations, and therefore non-experts in the domain can find it difficult to understand the underlying semantics of the link, making it hard for them to evaluate the link's correctness or suitability for a specific software engineering task. In this paper we present a novel NLP pipeline for generating and visualizing trace link explanations. Our approach identifies domain-specific concepts, retrieves a corpus of concept-related sentences, mines concept definitions and usage examples, and identifies relations between cross-artifact concepts in order to explain the links. It applies a post-processing step to prioritize the most likely acronyms and definitions and to eliminate non-relevant ones. We evaluate our approach using project artifacts from three different domains of interstellar telescopes, positive train control, and electronic health-care systems, and then report coverage, correctness, and potential utility of the generated definitions. We design and utilize an explanation interface which leverages concept definitions and relations to visualize and explain trace link rationales, and we report results from a user study that was conducted to evaluate the effectiveness of the explanation interface. Results show that the explanations presented in the interface helped non-experts to understand the underlying semantics of a trace link and improved their ability to vet the correctness of the link.

cs.SE↗

arXiv2022

Extending MAPE-K to support Human-Machine Teaming

The MAPE-K feedback loop has been established as the primary reference model for self-adaptive and autonomous systems in domains such as autonomous driving, robotics, and Cyber-Physical Systems. At the same time, the Human Machine Teaming (HMT) paradigm is designed to promote partnerships between humans and autonomous machines. It goes far beyond the degree of collaboration expected in human-on-the-loop and human-in-the-loop systems and emphasizes interactions, partnership, and teamwork between humans and machines. However, while MAPE-K enables fully autonomous behavior, it does not explicitly address the interactions between humans and machines as intended by HMT. In this paper, we present the MAPE-K-HMT framework which augments the traditional MAPE-K loop with support for HMT. We identify critical human-machine teaming factors and describe the infrastructure needed across the various phases of the MAPE-K loop in order to effectively support HMT. This includes runtime models that are constructed and populated dynamically across monitoring, analysis, planning, and execution phases to support human-machine partnerships. We illustrate MAPE-K-HMT using examples from an autonomous multi-UAV emergency response system, and present guidelines for integrating HMT into MAPE-K.

cs.RO↗

arXiv2021

RescueAR: Augmented Reality Supported Collaboration for UAV Driven Emergency Response Systems

Emergency response events are fast-paced, noisy, and they require teamwork to accomplish the mission. Furthermore, the increasing deployment of Unmanned Aerial Vehicles (UAVs) alongside emergency responders, demands a new form of partnership between humans and UAVs. Traditional radio-based information exchange between humans during an emergency response suffers from a lack of visualization and often results in miscommunication. This paper presents a novel collaboration platform: RescueAR, which utilizes the paradigm of Location-based Augmented Reality to geotag, share, and visualize information. RescueAR aims to support the two-way communication between humans and UAVs, facilitate collaboration across diverse responders, and visualize scene information relevant to the rescue team's role. According to our feasibility study, a user study, followed by a focus group session with police officers, RescueAR can support rescue teams in developing the spatial cognition of the scene, facilitate the exchange of geolocation information, and complement existing communication tools during the UAV-supported emergency response.

cs.HC↗

arXiv2021

Explaining Autonomous Decisions in Swarms of Human-on-the-Loop Small Unmanned Aerial Systems

Rapid advancements in Artificial Intelligence have shifted the focus from traditional human-directed robots to fully autonomous ones that do not require explicit human control. These are commonly referred to as Human-on-the-Loop (HotL) systems. Transparency of HotL systems necessitates clear explanations of autonomous behavior so that humans are aware of what is happening in the environment and can understand why robots behave in a certain way. However, in complex multi-robot environments, especially those in which the robots are autonomous, mobile, and require intermittent interventions, humans may struggle to maintain situational awareness. Presenting humans with rich explanations of autonomous behavior tends to overload them with too much information and negatively affect their understanding of the situation. Therefore, explaining the autonomous behavior or autonomy of multiple robots creates a design tension that demands careful investigation. This paper examines the User Interface (UI) design trade-offs associated with providing timely and detailed explanations of autonomous behavior for swarms of small Unmanned Aerial Systems (sUAS) or drones. We analyze the impact of UI design choices on human awareness of the situation. We conducted multiple user studies with both inexperienced and expert sUAS operators to present our design solution and provide initial guidelines for designing the HotL multi-sUAS interface.

cs.HC↗

arXiv2021

Enhancing Taxonomy Completion with Concept Generation via Fusing Relational Representations

Automatic construction of a taxonomy supports many applications in e-commerce, web search, and question answering. Existing taxonomy expansion or completion methods assume that new concepts have been accurately extracted and their embedding vectors learned from the text corpus. However, one critical and fundamental challenge in fixing the incompleteness of taxonomies is the incompleteness of the extracted concepts, especially for those whose names have multiple words and consequently low frequency in the corpus. To resolve the limitations of extraction-based methods, we propose GenTaxo to enhance taxonomy completion by identifying positions in existing taxonomies that need new concepts and then generating appropriate concept names. Instead of relying on the corpus for concept embeddings, GenTaxo learns the contextual embeddings from their surrounding graph-based and language-based relational information, and leverages the corpus for pre-training a concept name generator. Experimental results demonstrate that GenTaxo improves the completeness of taxonomies over existing methods.

cs.CL↗

arXiv2021

Adaptive Autonomy in Human-on-the-Loop Vision-Based Robotics Systems

Computer vision approaches are widely used by autonomous robotic systems to sense the world around them and to guide their decision making as they perform diverse tasks such as collision avoidance, search and rescue, and object manipulation. High accuracy is critical, particularly for Human-on-the-loop (HoTL) systems where decisions are made autonomously by the system, and humans play only a supervisory role. Failures of the vision model can lead to erroneous decisions with potentially life or death consequences. In this paper, we propose a solution based upon adaptive autonomy levels, whereby the system detects loss of reliability of these models and responds by temporarily lowering its own autonomy levels and increasing engagement of the human in the decision-making process. Our solution is applicable for vision-based tasks in which humans have time to react and provide guidance. When implemented, our approach would estimate the reliability of the vision task by considering uncertainty in its model, and by performing covariate analysis to determine when the current operating environment is ill-matched to the model's training data. We provide examples from DroneResponse, in which small Unmanned Aerial Systems are deployed for Emergency Response missions, and show how the vision model's reliability would be used in addition to confidence scores to drive and specify the behavior and adaptation of the system's autonomy. This workshop paper outlines our proposed approach and describes open challenges at the intersection of Computer Vision and Software Engineering for the safe and reliable deployment of vision models in the decision making of autonomous systems.

cs.SE↗

arXiv2021

Traceability Transformed: Generating more Accurate Links with Pre-Trained BERT Models

Software traceability establishes and leverages associations between diverse development artifacts. Researchers have proposed the use of deep learning trace models to link natural language artifacts, such as requirements and issue descriptions, to source code; however, their effectiveness has been restricted by availability of labeled data and efficiency at runtime. In this study, we propose a novel framework called Trace BERT (T-BERT) to generate trace links between source code and natural language artifacts. To address data sparsity, we leverage a three-step training strategy to enable trace models to transfer knowledge from a closely related Software Engineering challenge, which has a rich dataset, to produce trace links with much higher accuracy than has previously been achieved. We then apply the T-BERT framework to recover links between issues and commits in Open Source Projects. We comparatively evaluated accuracy and efficiency of three BERT architectures. Results show that a Single-BERT architecture generated the most accurate links, while a Siamese-BERT architecture produced comparable results with significantly less execution time. Furthermore, by learning and transferring knowledge, all three models in the framework outperform classical IR trace models. On the three evaluated real-word OSS projects, the best T-BERT stably outperformed the VSM model with average improvements of 60.31% measured using Mean Average Precision (MAP). RNN severely underperformed on these projects due to insufficient training data, while T-BERT overcame this problem by using pretrained language models and transfer learning.

cs.SE↗

arXiv2020

Human-Drone Interactions with Semi-Autonomous Cohorts of Collaborating Drones

Research in human-drone interactions has primarily focused on cases in which a person interacts with a single drone as an active controller, recipient of information, or a social companion; or cases in which an individual, or a team of operators interacts with a swarm of drones as they perform some coordinated flight patterns. In this position paper we explore a third scenario in which multiple humans and drones collaborate in an emergency response scenario. We discuss different types of interactions, and draw examples from current DroneResponse project.

cs.HC↗

arXiv2020

Model-Driven Requirements for Humans-on-the-Loop Multi-UAV Missions

The use of semi-autonomous Unmanned Aerial Vehicles (UAVs or drones) to support emergency response scenarios, such as fire surveillance and search-and-rescue, has the potential for huge societal benefits. Onboard sensors and artificial intelligence (AI) allow these UAVs to operate autonomously in the environment. However, human intelligence and domain expertise are crucial in planning and guiding UAVs to accomplish the mission. Therefore, humans and multiple UAVs need to collaborate as a team to conduct a time-critical mission successfully. We propose a meta-model to describe interactions among the human operators and the autonomous swarm of UAVs. The meta-model also provides a language to describe the roles of UAVs and humans and the autonomous decisions. We complement the meta-model with a template of requirements elicitation questions to derive models for specific missions. We also identify common scenarios where humans should collaborate with UAVs to augment the autonomy of the UAVs. We introduce the meta-model and the requirements elicitation process with examples drawn from a search-and-rescue mission in which multiple UAVs collaborate with humans to respond to the emergency. We then apply it to a second scenario in which UAVs support first responders in fighting a structural fire. Our results show that the meta-model and the template of questions support the modeling of the human-on-the-loop human interactions for these complex missions, suggesting that it is a useful tool for modeling the human-on-the-loop interactions for multi-UAVs missions.

cs.SE↗

arXiv2020

Traceability Support for Multi-Lingual Software Projects

Software traceability establishes associations between diverse software artifacts such as requirements, design, code, and test cases. Due to the non-trivial costs of manually creating and maintaining links, many researchers have proposed automated approaches based on information retrieval techniques. However, many globally distributed software projects produce software artifacts written in two or more languages. The use of intermingled languages reduces the efficacy of automated tracing solutions. In this paper, we first analyze and discuss patterns of intermingled language use across multiple projects, and then evaluate several different tracing algorithms including the Vector Space Model (VSM), Latent Semantic Indexing (LSI), Latent Dirichlet Allocation (LDA), and various models that combine mono- and cross-lingual word embeddings with the Generative Vector Space Model (GVSM). Based on an analysis of 14 Chinese-English projects, our results show that best performance is achieved using mono-lingual word embeddings integrated into GVSM with machine translation as a preprocessing step.

cs.SE↗