arXiv subjects

Jani Tuorila

Publications and source records attributed to Jani Tuorila.

At least 19 recordsLinked to original sources

arXiv2026

Efficient and accurate two-qubit-gate operation in a high-connectivity transmon lattice utilizing a tunable coupling to a shared mode

Increasing connectivity and decreasing qubit-state delocalization without compromising the speed and accuracy of elementary gate operations are topical challenges in the development of large-scale superconducting quantum computers. In this theoretical work, we study a special honeycomb qubit lattice where each qubit inside a unit cell is coupled to every other one via two dedicated tunable couplers and a common central element. This results in an effective multi-mode interaction enabling tunable, on-demand, all-to-all connectivity between each qubit pair within the unit cell. We provide a thorough analysis of the unit cell, including a proposal for a novel and efficient conditional-Z gate scheme which takes advantage of the effective multi-mode coupling. We develop an experimentally viable pulse protocol for a single-step gate implementation which considerably improves the gate speed compared to the previous two-qubit-gate realizations suggested for architectures utilizing a center mode. We also show numerical results on how the presence of spectator qubits affects the average two-qubit-gate fidelity, and analyse how the multi-mode coupling structure mitigates the delocalization-induced crosstalk during simultaneous single-qubit gates within the unit cell. We also provide analytical estimates for the errors caused by relaxation and dephasing during a two-qubit-gate operation, including noise terms for the multi-mode coupling structure. Our multi-mode coupling architecture results in a good balance between increased connectivity and available parallelism, especially when several interacting unit cells form a quantum processing unit. We anticipate that the obtained results pave the way towards high-connectivity quantum processors with efficient and low-overhead quantum algorithms.

quant-ph↗

arXiv2026

Mitigating crosstalk errors for simultaneous single-qubit gates on a superconducting quantum processor

Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.

quant-ph↗

arXiv2025

A Superconducting Qubit-Resonator Quantum Processor with Effective All-to-All Connectivity

In this work we introduce a superconducting quantum processor architecture that uses a transmission-line resonator to implement effective all-to-all connectivity between six transmon qubits. This architecture can be used as a test-bed for algorithms that benefit from high connectivity. We show that the central resonator can be used as a computational element, which offers the flexibility to encode a qubit for quantum computation or to utilize its bosonic modes which further enables quantum simulation of bosonic systems. To operate the quantum processing unit (QPU), we develop and benchmark the qubit-resonator conditional Z gate and the qubit-resonator MOVE operation. The latter allows for transferring a quantum state between one of the peripheral qubits and the computational resonator. We benchmark the QPU performance and achieve a genuinely multi-qubit entangled Greenberger-Horne-Zeilinger (GHZ) state over all six qubits with a readout-error mitigated fidelity of $0.86$.

quant-ph↗

arXiv2025

Above 99.9% Fidelity Single-Qubit Gates, Two-Qubit Gates, and Readout in a Single Superconducting Quantum Device

Achieving high-fidelity single-qubit gates, two-qubit gates, and qubit readout is critical for building scalable, error-corrected quantum computers. However, device parameters that enhance one operation often degrade the others, making simultaneous optimization challenging. Here, we demonstrate that careful tuning of qubit-coupler coupling strengths in a superconducting circuit with two transmon qubits coupled via a tunable coupler enables high-fidelity single- and two-qubit gates, without compromising readout performance. As a result, we achieve a 40h-averaged CZ gate fidelity of 99.93%, simultaneous single-qubit gate fidelities of 99.98%, and readout fidelities over 99.94% in a single device. These results are enabled by optimized coupling parameters, an efficient CZ gate calibration experiment based on our new Phased-Averaged Leakage Error Amplification (PALEA) protocol, and a readout configuration compatible with high coherence qubits. Our results demonstrate a viable path toward scaling up superconducting quantum processors while maintaining consistently high fidelities across all core operations.

quant-ph↗

arXiv2024

Charge-parity switching effects and optimisation of transmon-qubit design parameters

Enhancing the performance of noisy quantum processors requires improving our understanding of error mechanisms and the ways to overcome them. In this study, we identify optimal ranges for qubit design parameters, grounded in comprehensive noise modeling. To this end, we also analyze a previously unexplored error mechanism that can perturb two-qubit gates due to charge-parity switches caused by quasiparticles. Due to the utilization of the higher levels of a transmon, where the charge dispersion is significantly larger, a charge-parity switch will affect the conditional phase of the two-qubit gate. We derive an analytical expression for the infidelity of a diabatic controlled-Z gate and see effects of similar magnitude in adiabatic controlled phase gates in the tunable coupler architecture. Moreover, we show that the effect of a charge-parity switch can be the dominant quasiparticle-related error source of a two-qubit gate. We also demonstrate that charge-parity switches induce a residual longitudinal interaction between qubits in a tunable-coupler circuit. We present a performance metric for quantum circuit execution, encompassing the fidelity and number of single and two-qubit gates in an algorithm, as well as the state preparation fidelity. This comprehensive metric, coupled with a detailed noise model, empowers us to determine an optimal range for the qubit design parameters Substantiating our findings through exact numerical simulations, we establish that fabricating quantum chips within this optimal parameter range not only augments the performance metric but also ensures its continued improvement with the enhancement of individual qubit coherence properties. Our systematic analysis offers insights and serves as a guiding framework for the development of the next generation of transmon-based quantum processors.

quant-ph↗

arXiv2022

Long-distance transmon coupler with CZ gate fidelity above $99.8\%$

Tunable coupling of superconducting qubits has been widely studied due to its importance for isolated gate operations in scalable quantum processor architectures. Here, we demonstrate a tunable qubit-qubit coupler based on a floating transmon device which allows us to place qubits at least 2 mm apart from each other while maintaining over 50 MHz coupling between the coupler and the qubits. In the introduced tunable-coupler design, both the qubit-qubit and the qubit-coupler couplings are mediated by two waveguides instead of relying on direct capacitive couplings between the components, reducing the impact of the qubit-qubit distance on the couplings. This leaves space for each qubit to have an individual readout resonator and a Purcell filter needed for fast high-fidelity readout. In addition, the large qubit-qubit distance reduces unwanted non-nearest neighbor coupling and allows multiple control lines to cross over the structure with minimal crosstalk. Using the proposed flexible and scalable architecture, we demonstrate a controlled-$Z$ gate with $(99.81 \pm 0.02)\%$ fidelity.

quant-ph↗

arXiv2022

Unimon qubit

Superconducting qubits are one of the most promising candidates to implement quantum computers. The superiority of superconducting quantum computers over any classical device in simulating random but well-determined quantum circuits has already been shown in two independent experiments and important steps have been taken in quantum error correction. However, the currently wide-spread qubit designs do not yet provide high enough performance to enable practical applications or efficient scaling of logical qubits owing to one or several following issues: sensitivity to charge or flux noise leading to decoherence, too weak non-linearity preventing fast operations, undesirably dense excitation spectrum, or complicated design vulnerable to parasitic capacitance. Here, we introduce and demonstrate a superconducting-qubit type, the unimon, which combines the desired properties of high non-linearity, full insensitivity to dc charge noise, insensitivity to flux noise, and a simple structure consisting only of a single Josephson junction in a resonator. We measure the qubit frequency, $ω_{01}/(2π)$, and anharmonicity $α$ over the full dc-flux range and observe, in agreement with our quantum models, that the qubit anharmonicity is greatly enhanced at the optimal operation point, yielding, for example, 99.9% and 99.8% fidelity for 13-ns single-qubit gates on two qubits with $(ω_{01},α)=(4.49~\mathrm{GHz}, 434~\mathrm{ MHz})\times 2π$ and $(3.55~\mathrm{GHz}, 744~\mathrm{ MHz})\times 2π$, respectively. The energy relaxation time $T_1\lesssim 10~μ\mathrm{s}$ is stable for hours and seems to be limited by dielectric losses. Thus, future improvements of the design, materials, and gate time may promote the unimon to break the 99.99% fidelity target for efficient quantum error correction and possible quantum advantage with noisy systems.

quant-ph↗

arXiv2022

Efficient classical simulation of open bosonic quantum systems

We propose a computationally efficient method to solve the dynamics of operators of bosonic quantum systems coupled to their environments. The method maps the operator under interest to a set of complex-valued functions, and its adjoint master equation to a set of partial differential equations for these functions, which are subsequently solved numerically. In the limit of weak coupling to the environment, the mapping of the operator enables storing the operator efficiently during the simulation, leading to approximately quadratic improvement in the memory consumption compared with the direct approach of solving the adjoint master equation in the number basis, while retaining the computation time comparable. Moreover, the method enables efficient parallelization which allows to optimize for the actual computational time to reach an approximately quadratic speed up, while retaining the memory consumption comparable to the direct approach. We foresee the method to prove useful, e.g., for the verification of the operation of superconducting quantum processors.

quant-ph↗

arXiv2022

Assessment of weak-coupling approximations on a driven two-level system under dissipation

The standard weak-coupling approximations associated to open quantum systems have been extensively used in the description of a two-level quantum system, qubit, subjected to relatively weak dissipation compared with the qubit frequency. However, recent progress in the experimental implementations of controlled quantum systems with increased levels of on-demand engineered dissipation has motivated precision studies in parameter regimes that question the validity of the approximations, especially in the presence of time-dependent drive fields. In this paper, we address the precision of weak-coupling approximations by studying a driven qubit through the numerically exact and non-perturbative method known as the stochastic Liouville-von Neumann equation with dissipation. By considering weak drive fields and a cold Ohmic environment with a high cutoff frequency, we use the Markovian Lindblad master equation as a point of comparison for the SLED method and study the influence of the bath-induced energy shift on the qubit dynamics. We also propose a metric that may be used in experiments to map the regime of validity of the Lindblad equation in predicting the steady state of the driven qubit. In addition, we study signatures of the well-known Mollow triplet and observe its meltdown owing to dissipation in an experimentally feasible parameter regime of circuit electrodynamics. Besides shedding light on the practical limitations of the Lindblad equation, we expect our results to inspire future experimental research on engineered open quantum systems, the accurate modeling of which may benefit from non-perturbative methods.

quant-ph↗

arXiv2020

State leakage during fast decay and control of a superconducting transmon qubit

Superconducting Josephson junction qubits constitute the main current technology for many applications, including scalable quantum computers and thermal devices. Theoretical modeling of such systems is usually done within the two-level approximation. However, accurate theoretical modeling requires taking into account the influence of the higher excited states without limiting the system to the two-level qubit subspace. Here, we study the dynamics and control of a superconducting transmon using the numerically exact stochastic Liouville-von Neumann equation approach. We focus on the role of state leakage from the ideal two-level subspace for bath induced decay and single-qubit gate operations. We find significant short-time state leakage due to the strong coupling to the bath. We quantify the leakage errors in single-qubit gates and demonstrate their suppression with DRAG control for a five-level transmon in the presence of decoherence. Our results predict the limits of accuracy of the two-level approximation and possible intrinsic constraints in qubit dynamics and control for an experimentally relevant parameter set.

quant-ph↗

arXiv2020

Validity of Born-Markov master equations for single and two-qubit systems

The urgent need for reliable simulation tools to match the extreme accuracy needed to control tailored quantum devices highlights the importance of understanding open quantum systems and their modeling. To this end, we compare here the commonly used Redfield and Lindblad master equations against numerically exact results in the case of one and two resonant qubits transversely coupled at a single point to a Drude-cut ohmic bath. All the relevant parameters are varied over a broad range which allows us to give detailed predictions about the validity and physically meaningful applicability of the weak-coupling approaches. We characterize the accuracy of the approximate approaches by comparing the maximum difference of their system evolution superoperators with numerically exact results. After optimizing the parameters of the approximate models to minimize the difference, we also explore if and to what extent the weak-coupling equations can be applied at least as phenomenological models. Optimization may lead to an accurate reproduction of experimental data, but yet our results are important to estimate the reliability of the extracted parameter values such as the bath temperature. Our findings set general guidelines for the range of validity of the usual Born-Markov master equations and indicate that they fail to accurately describe the physics in surprisingly broad range of parameters, in particular at low temperatures. Since quantum-technological devices operate there their accurate modeling calls for a careful choice of methods.

quant-ph↗

arXiv2019

System-Environment Correlations in Qubit Initialization and Control

The impressive progress in fabricating and controlling superconducting devices for quantum information processing has reached a level where reliable theoretical predictions need to account for quantum correlations that are not captured by the conventional modeling of contemporary quantum computers. This applies particularly to the qubit initialization as the process which crucially limits typical operation times. Here we employ numerically exact methods to study realistic implementations of a transmon qubit embedded in electromagnetic environments focusing on the most important system-reservoir correlation effects such as the Lamb shift and entanglement. For the qubit initialization we find a fundamental trade-off between speed and accuracy which sets intrinsic constraints in the optimization of future reset protocols. Instead, the fidelities of quantum logic gates can be sufficiently accurately predicted by standard treatments. Our results can be used to accurately predict the performance of specific set-ups and also to guide future experiments in probing low-temperature properties of qubit reservoirs.

quant-ph↗

arXiv2017

Flux-tunable heat sink for quantum electric circuits

Superconducting microwave circuits show great potential for practical quantum technological applications such as quantum information processing. However, fast and on-demand initialization of the quantum degrees of freedom in these devices remains a challenge. Here, we experimentally implement a tunable heat sink that is potentially suitable for the initialization of superconducting qubits. Our device consists of two coupled resonators. The first resonator has a high quality factor and a fixed frequency whereas the second resonator is designed to have a low quality factor and a tunable resonance frequency. We engineer the low quality factor using an on-chip resistor and the frequency tunability using a superconducting quantum interference device. When the two resonators are in resonance, the photons in the high-quality resonator can be efficiently dissipated. We show that the corresponding loaded quality factor can be tuned from above $10^5$ down to a few thousand at 10 GHz in good quantitative agreement with our theoretical model.

cond-mat.mes-hall↗

arXiv2016

Efficient protocol for qubit initialization with a tunable environment

We propose an efficient qubit initialization protocol based on a dissipative environment that can be dynamically adjusted. Here the qubit is coupled to a thermal bath through a tunable harmonic oscillator. On-demand initialization is achieved by sweeping the oscillator rapidly into resonance with the qubit. This resonant coupling with the engineered environment induces fast relaxation to the ground state of the system, and a consecutive rapid sweep back to off resonance guarantees weak excess dissipation during quantum computations. We solve the corresponding quantum dynamics using a Markovian master equation for the reduced density operator of the qubit-bath system. This allows us to optimize the parameters and the initialization protocol for the qubit. Our analytical calculations show that the ground-state occupation of our system is well protected during the fast sweeps of the environmental coupling and, consequently, we obtain an estimate for the duration of our protocol by solving the transition rates between the low-energy eigenstates with the Jacobian diagonalization method. Our results suggest that the current experimental state of the art for the initialization speed of superconducting qubits at a given fidelity can be considerably improved.

cond-mat.mes-hall↗

arXiv2014

Enhancing optomechanical coupling via the Josephson effect

Cavity optomechanics is showing promise for studying quantum mechanics in large systems. However, smallness of the radiation-pressure coupling is a serious hindrance. Here we show how the charge tuning of the Josephson inductance in a single-Cooper-pair transistor (SCPT) can be exploited to arrange a strong radiation pressure -type coupling $g_0$ between mechanical and microwave resonators. In a certain limit of parameters, such a coupling can also be seen as a qubit-mediated coupling of two resonators. We show that this scheme allows reaching extremely high $g_0$. Contrary to the recent proposals for exploiting the non-linearity of a large radiation pressure coupling, the main non-linearity in this setup originates from a cross-Kerr type of coupling between the resonators, where the cavity refractive index depends on the phonon number. The presence of this coupling will allow accessing the individual phonon numbers via the measurement of the cavity.

cond-mat.mes-hall↗

arXiv2013

Charge qubit driven via the Josephson nonlinearity

We study the novel nonlinear phenomena that emerge in a charge qubit due to the interplay between a strong microwave flux drive and a periodic Josephson potential. We first analyze the system in terms of the linear Landau-Zener-Stückelberg model, and show its inadequacy in a periodic system with several Landau-Zener crossings within a drive period. Experimentally, we probe the quasienergy levels of the driven qubit with an LC-cavity, which requires the use of linear response theory. We also show that our numerical calculations are in good agreement with the experimental data.

cond-mat.mes-hall↗

arXiv2013

Probe spectroscopy of quasienergy states

The present qubit technology, in particular in Josephson qubits, allows an unprecedented control of discrete energy levels. This motivates a new study of the old pump-probe problem, where a discrete quantum system is driven by a strong drive and simultaneously probed by a weaker one. The strong drive is included by the Floquet method and the resulting quasienergy states are then studied with the probe. We study a qubit where the harmonic drive has a significant longitudinal component relative to the static equilibrium state of the qubit. Both analytical and numerical methods are used to solve the problem. We present calculations with realistic parameters and compare the results with recent experimental results. A short introduction to the Floquet method and the probe absorption is given.

quant-ph↗

arXiv2010

Stark effect and generalized Bloch-Siegert shift in a strongly driven two-level system

A superconducting qubit was driven in an ultrastrong fashion by an oscillatory microwave field, which was created by coupling via the nonlinear Josephson energy. The observed Stark shifts of the `atomic' levels are so pronounced that corrections even beyond the lowest-order Bloch-Siegert shift are needed to properly explain the measurements. The quasienergies of the dressed two-level system were probed by resonant absorption via a cavity, and the results are in agreement with a calculation based on the Floquet approach.

cond-mat.mes-hall↗