arXiv subjects

Janine Splettstoesser

Publications and source records attributed to Janine Splettstoesser.

At least 37 records · Page 2Linked to original sources

arXiv2025

Thermodynamic and energetic constraints on transition probabilities of small-scale quantum systems

We study the transition probabilities of a two-point measurement on a quantum system, initially prepared in a thermal state. We find two independent constraints on the difference between transition probabilities when the system is prepared at different temperatures, which both turn out to be particularly restrictive when the measured quantum system is small. These bounds take the form of a thermodynamic and of an energetic constraint, as they are associated with the dissipated heat and with the absorbed energy required to increase or to reduce the temperature of the system. The derived constraints apply to arbitrary system Hamiltonians, including interactions or non-linear energy spectra. We show the relevance of these constraints for the special case where transitions are induced by energy or particle exchange in weakly coupled bipartite systems out of equilibrium. This example is of interest for a wide range of experimentally relevant systems, from molecular junctions to coupled cavities, and can be tested by, for instance, measuring the out-of-equilibrium tunneling current and its noise.

cond-mat.mes-hall↗

arXiv2025

Combining kinetic and thermodynamic uncertainty relations in quantum transport

We study the fluctuations of generic currents in multi-terminal, multi-channel quantum transport settings. In the quantum regime, these fluctuations and the resulting precision differ strongly depending on whether the device is of fermionic or bosonic nature. Using scattering theory, we show that the precision is bounded by constraints set by the entropy production and by the activity in the spirit of thermodynamic or kinetic uncertainty relations, valid for fermionic and bosonic quantum systems and even in the absence of time-reversal symmetry. Furthermore, we derive a combined thermodynamic kinetic uncertainty relation, which is tight over a wide range of parameters and can hence predict the reachable precision of a device. Since these constraints can be expressed in terms of observables accessible in transport measurements, such as currents and bandwidth, we foresee that the tight thermodynamic kinetic uncertainty-like bounds are also useful as an inference tool: they can be exploited to estimate entropy production from transport observables, such as the charge current and its noise, which are more easily accessible in experiment.

cond-mat.mes-hall↗

arXiv2025

Role of electron-electron interaction in the Mpemba effect in quantum dots

The Mpemba effect has initially been noticed in macroscopic systems -- namely that hot water can freeze faster than cold water -- but recently its extension to open quantum systems has attracted significant attention. This phenomenon can be explained in the context of nonequilibrium thermodynamics of Markovian systems, relying on the amplitudes of different decay modes of the system dynamics. Here, we study the Mpemba effect in a single-level quantum dot coupled to a thermal bath, highlighting the role of the sign and magnitude of the electron-electron interaction in the occurrence of the Mpemba effect. We gain physical insights into the decay modes from a dissipative symmetry of this system called fermionic duality. Based on this analysis of the relaxation to equilibrium of the dot, we derive criteria for the occurrence of the Mpemba effect using two thermodynamically relevant measures of the distance to equilibrium, the nonequilibrium free energy and the dot energy. We furthermore compare this effect to a possible exponential speedup of the relaxation. Finally, we propose experimentally relevant schemes for the state preparation and explore different ways of observing the Mpemba effect in quantum dots in experiments.

cond-mat.mes-hall↗

arXiv2025

Coherent feedback control for cavity optomechanical systems with a frequency-dependent mirror

Ground-state cooling of mechanical resonators is a prerequisite for the observation of various quantum effects in optomechanical systems and thus has always been a crucial task in quantum optomechanics. In this paper, we study how to realize ground-state cooling of the mechanical mode in a Fano-mirror optomechanical setup, which allows for enhanced effective optomechanical interaction but typically works in the (deeply) unresolved-sideband regime. We reveal that for such a two-sided cavity geometry with very different decay rates at the two cavity mirrors, it is possible to cool the mechanical mode down to its ground state within a broad range of parameters by using an appropriate single-sided coherent feedback. This is possible even if the total optical loss is more than seven orders of magnitude larger than the mechanical frequency and the feedback efficiency is relatively low. Importantly, we show that a more standard double-sided feedback scheme is not appropriate to cooperate with a Fano-mirror system.

quant-ph↗

arXiv2024

Autonomous demon exploiting heat and information at the trajectory level

We propose an electronic bipartite system consisting of a working substance, in which a refrigeration process is implemented, and of a nonthermal resource region, containing a combination of different thermal baths. In the working substance, heat is extracted from the coldest of two electronic reservoirs (refrigeration) via heat- and particle transport through a quantum dot. This quantum dot of the working substance is capacitively coupled to the resource region. In such a setup, a finite cooling power can be obtained in the working substance, while the energy exchange with the resource region exactly cancels out on average. At the same time, information is always exchanged, even on average, due to the capacitive coupling between the two parts of the bipartite system. The proposed system therefore implements an autonomous demon with fully vanishing heat extraction from the resource. Unlike macroscopic machines, nanoscale machines exhibit large fluctuations in performance, so precision becomes an important performance quantifier. We give a comprehensive description of the thermodynamic performance of the proposed autonomous demon in terms of stochastic trajectories and of full counting statistics and demonstrate that the precision of the cooling power strongly depends on the operation principle of the device. More specifically, the interplay of information flow and counter-balancing heat flows dramatically impacts the trade-off between cooling power, efficiency, and precision. We expect this insight to be of relevance for guiding the design of energy-conversion processes exploiting nonthermal resources.

cond-mat.mes-hall↗

arXiv2024

Impact of potential and temperature fluctuations on charge and heat transport in quantum Hall edges in the heat Coulomb blockade regime

We present a broad study of charge and heat transport in a mesoscopic system where one or several quantum Hall edge channels are strongly coupled to a floating Ohmic contact (OC). It is well known that charge-current fluctuations emanating from the OC along the edge channels are highly susceptible to the OC charge capacitance in the heat Coulomb blockade regime (an impeded ability of the OC to equilibrate edge channels). Here, we demonstrate how potential- and temperature fluctuations due to finite OC charge and heat capacities impact the heat-current fluctuations emitted from the OC. First, by assuming an infinite OC heat capacity, we show that the output heat-current noise is strongly dependent on the OC charge capacitance, following from a close relation between one-dimensional charge- and heat currents. When also the OC heat capacity is finite, an interplay of potential- and temperature fluctuations influences the heat transport. Concretely, we find that the effect of the charge capacitance on heat transport manifests in terms of a strongly increased energy relaxation time in the heat Coulomb blockade regime. Furthermore, we find expressions for a broad set of output observables, such as charge and heat auto- and cross correlations, as functions of input and OC fluctuations, depending on the relation between charge and energy relaxation times compared to the frequency of fluctuations and inverse (local) temperatures as well as on the number of edge channels attached to the OC. Finally, we show that a finite OC heat capacity transforms the full counting statistics of the output charge from Gaussian to non-Gaussian. Our findings provide novel opportunities to experimentally probe and harness the quantum nature of heat transport in strongly coupled electron circuits.

cond-mat.mes-hall↗

arXiv2024

Spectroscopy of hot-electron pair emission from a driven quantum dot

On-demand emission of individual electrons for the implementation of flying qubits and quantum electron-optics experiments requires precise knowledge and tunability of emission times and energies. Crucially, for confined electron sources such as driven quantum dots, the effect of local Coulomb interaction on these emission properties needs to be understood, in particular if multiple particles are emitted close in time or near-simultaneously. This paper theoretically analyzes electron-pair emission from an ac driven quantum dot, detailing the competing effects of the electron-electron interaction, the time-dependent potential forming the quantum dot, and of the quantum-state properties such as degeneracy on the emission times and energies. We complement a numerical analysis of the coherent Schrödinger evolution of two particles in a driven potential with a master-equation description for strongly interacting electrons tunneling stochastically into a weakly coupled conductor. This captures a broad range of different influences on the emitted particles and thereby guides the development of single-electron sources higher control over two-particle emission properties.

cond-mat.mes-hall↗

arXiv2024

Dissipative and dispersive cavity optomechanics with a frequency-dependent mirror

An optomechanical microcavity can considerably enhance the interaction between light and mechanical motion by confining light to a sub-wavelength volume. However, this comes at the cost of an increased optical loss rate. Therefore, microcavity-based optomechanical systems are placed in the unresolved-sideband regime, preventing sideband-based ground-state cooling. A pathway to reduce optical loss in such systems is to engineer the cavity mirrors, i.e., the optical modes that interact with the mechanical resonator. In our work, we analyze such an optomechanical system, whereby one of the mirrors is strongly frequency-dependent, i.e., a suspended Fano mirror. This optomechanical system consists of two optical modes that couple to the motion of the suspended Fano mirror. We formulate a quantum-coupled-mode description that includes both the standard dispersive optomechanical coupling as well as dissipative coupling. We solve the Langevin equations of the system dynamics in the linear regime showing that ground-state cooling from room temperature can be achieved even if the cavity is per se not in the resolved-sideband regime, but achieves effective sideband resolution through strong optical mode coupling. Importantly, we find that the cavity output spectrum needs to be properly analyzed with respect to the effective laser detuning to infer the phonon occupation of the mechanical resonator. Our work also predicts how to reach the regime of nonlinear quantum optomechanics in a Fano-based microcavity by engineering the properties of the Fano mirror.

physics.optics↗

arXiv2023

Constraints between entropy production and its fluctuations in nonthermal engines

We analyze a mesoscopic conductor autonomously performing a thermodynamically useful task, such as cooling or producing electrical power, in a part of the system -- the working substance -- by exploiting another terminal or set of terminals -- the resource -- that contains a stationary nonthermal (nonequilibrium) distribution. Thanks to the nonthermal properties of the resource, on average no exchange of particles or energy with the working substance is required to fulfill the task. This resembles the action of a demon, as long as only average quantities are considered. Here, we go beyond a description based on average currents and investigate the role of fluctuations in such a system. We show that a minimum level of entropy fluctuations in the system is necessary, whenever one is exploiting a certain entropy production in the resource terminal to perform a useful task in the working substance. For concrete implementations of the demonic nonthermal engine in three- and four-terminal electronic conductors in the quantum Hall regime, we compare the resource fluctuations to the entropy production in the resource and to the useful engine output (produced power or cooling power).

cond-mat.mes-hall↗

arXiv2023

Out-of-Equilibrium Fluctuation-Dissipation Bounds

We prove a general inequality between the charge current and its fluctuations valid for any non-interacting coherent electronic conductor and for any stationary out-of-equilibrium condition, thereby going beyond established fluctuation-dissipation relations. The developed fluctuation-dissipation bound saturates at large temperature bias and reveals additional insight for heat engines, since it limits the output power by power fluctuations. It is valid when the thermodynamic uncertainty relations break down due to quantum effects and provides stronger constraints close to thermovoltage.

cond-mat.mes-hall↗

arXiv2023

Transient transport spectroscopy of an interacting quantum dot proximized by a superconductor: Charge- and heat-currents after a switch

We analyze the time-evolution of a quantum dot which is proximized by a large-gap superconductor and weakly probed using the charge and heat currents into a wide-band metal electrode. We map out the full time dependence of these currents after initializing the system by a switch. We find that due to the proximity effect there are two simple yet distinct switching procedures which initialize a non-stationary mixture of the gate-voltage dependent eigenstates of the proximized quantum dot. We find in particular that the ensuing time-dependent heat current is a sensitive two-particle probe of the interplay of strong Coulomb interaction and induced superconducting pairing. The pairing can lead to a suppression of charge and heat current decay which we analyze in detail. The analysis of the results makes crucial use of analytic formulas obtained using fermionic duality, a ``dissipative symmetry'' of the master equation describing this class of open systems.

cond-mat.mes-hall↗

arXiv2023

Thermodynamic performance of hot-carrier solar cells: A quantum transport model

In conventional solar cells, photogenerated carriers lose part of their energy before they can be extracted to make electricity. The aim of hot-carrier solar cells is to extract the carriers before this energy loss, thereby turning more energy into electrical power. This requires extracting the carriers in a nonequilibrium (nonthermal) energy distribution. Here, we investigate the performance of hot-carrier solar cells for such nonequilibrium distributions. We propose a quantum transport model in which each energy-loss process (carrier thermalization, relaxation, and recombination) is simulated by a Büttiker probe. We study charge and heat transport to analyze the hot-carrier solar cell's power output and efficiency, introducing partial efficiencies for different loss processes and the carrier extraction. We show that producing electrical power from a nonequilibrium distribution has the potential to improve the output power and efficiency. Furthermore, in the limit where the distribution is thermal, we prove that a boxcar-shaped transmission for the carrier extraction maximizes the efficiency at any given output power.

cond-mat.mes-hall↗

arXiv2023

Charge, spin, and heat shot noises in the absence of average currents: Conditions on bounds at zero and finite frequencies

Nonequilibrium situations where selected currents are suppressed are of interest in fields like thermoelectrics and spintronics, raising the question of how the related noises behave. We study such zero-current charge, spin, and heat noises in a two-terminal mesoscopic conductor. In the presence of voltage, spin and temperature biases, the nonequilibrium (shot) noises of charge, spin, and heat can be arbitrarily large, even if their average currents vanish. However, as soon as a temperature bias is present, additional equilibrium (thermal-like) noise necessarily occurs. We show that this equilibrium noise sets an upper bound on the zero-current charge and spin shot noises, even if additional voltage or spin biases are present. We demonstrate that these bounds can be overcome for heat transport by breaking the spin and electron-hole symmetries, respectively. By contrast, we show that the bound on the charge noise for strictly two-terminal conductors even extends into the finite-frequency regime.

cond-mat.mes-hall↗

arXiv2023

Non-geometric pumping effects on the performance of interacting quantum-dot heat engines

Periodically driven quantum dots can act as counterparts of cyclic thermal machines at the nanoscale. In the slow-driving regime of geometric pumping, such machines have been shown to operate in analogy to a Carnot cycle. For larger driving frequencies, which are required in order to increase the cooling power, the efficiency of the operation decreases. Up to which frequency a close-to-optimal performance is still possible depends on the magnitude and sign of on-site electron-electron interaction. Extending our previous detailed study on cyclic quantum-dot refrigerators [Phys. Rev. B 106, 035405 (2022)], we here find that the optimal cooling power remains constant up to weak interaction strength compared to the cold-bath temperature. By contrast, the work cost depends on the interaction via the dot's charge relaxation rate, as the latter sets the typical driving frequency for the onset of non-geometric pumping contributions.

cond-mat.mes-hall↗

arXiv2022

Solution of master equations by fermionic-duality: Time-dependent charge and heat currents through an interacting quantum dot proximized by a superconductor

We analyze the time-dependent solution of master equations by exploiting fermionic duality, a dissipative symmetry applicable to a large class of open systems describing quantum transport. Whereas previous studies mostly exploited duality relations after partially solving the evolution equations, we here systematically exploit the invariance under the fermionic duality mapping from the very beginning when setting up these equations. Moreover, we extend the resulting simplifications -- so far applied to the local state evolution- to non-local observables such as transport currents. We showcase the exploitation of fermionic duality for a quantum dot with strong interaction -- covering both the repulsive and attractive case -- proximized by contact with a large-gap superconductor which is weakly probed by charge and heat currents into a wide-band normal-metal electrode. We derive the complete time-dependent analytical solution of this problem involving non-equilibrium Cooper pair transport, Andreev bound states and strong interaction. Additionally exploiting detailed balance we show that even for this relatively complex problem the evolution towards the stationary state can be understood analytically in terms of the stationary state of the system itself via its relation to the stationary state of a dual system with inverted Coulomb interaction, superconducting pairing and applied voltages.

cond-mat.mes-hall↗

arXiv2022

Impact of Channel Mixing on the Visibility of Two-particle Interferometry in Quantum Hall Edge States

We consider a two-particle interferometer, where voltage sources applied to ohmic contacts inject electronic excitations into a pair of copropagating edge channels. We analyze the impact of channel mixing due to inter-edge tunneling on the current noise measured at the output of the interferometer. Due to this mixing, the noise suppression typically expected for synchronized injecting sources is incomplete, thereby reducing the visibility of the interference. We investigate to which extent the impact of mixing on the noise visibility depends on different shapes of the voltage drives. Furthermore, we compare a simple model involving a single mixing point between the sources and the quantum point contact to the more realistic case of a continuous distribution of weak mixing points.

cond-mat.mes-hall↗

arXiv2022

Semiconductor-based electron flying qubits: Review on recent progress accelerated by numerical modelling

The progress of charge manipulation in semiconductor-based nanoscale devices opened up a novel route to realise a flying qubit with a single electron. In the present review, we introduce the concept of these electron flying qubits, discuss their most promising realisations and show how numerical simulations are applicable to accelerate experimental development cycles. Addressing the technological challenges of flying qubits that are currently faced by academia and quantum enterprises, we underline the relevance of interdisciplinary cooperation to move emerging quantum industry forward. The review consists of two main sections: Pathways towards the electron flying qubit: We address three routes of single-electron transport in GaAs-based devices focusing on surface acoustic waves, hot-electron emission from quantum dot pumps and Levitons. For each approach, we discuss latest experimental results and point out how numerical simulations facilitate engineering the electron flying qubit. Numerical modelling of quantum devices: We review the full stack of numerical simulations needed for fabrication of the flying qubits. Choosing appropriate models, examples of basic quantum mechanical simulations are explained in detail. We discuss applications of open-source (KWANT) and the commercial (nextnano) platforms for modelling the flying qubits. The discussion points out the large relevance of software tools to design quantum devices tailored for efficient operation.

cond-mat.mes-hall↗

arXiv2022

Geometric energy transport and refrigeration with driven quantum dots

We study geometric energy transport in a slowly driven single-level quantum dot weakly coupled to electronic contacts and with strong onsite interaction, which can be either repulsive or attractive. Exploiting a recently discovered fermionic duality for the evolution operator of the master equation, we provide compact and insightful analytic expressions of energy pumping curvatures for any pair of driving parameters. This enables us to systematically identify and explain the pumping mechanisms for different driving schemes, thereby also comparing energy and charge pumping. We determine the concrete impact of many-body interactions and show how particle-hole symmetry and fermionic duality manifest, both individually and in combination, as system-parameter symmetries of the energy pumping curvatures. Building on this transport analysis, we study the driven dot acting as a heat pump or refrigerator, where we find that the sign of the onsite interaction plays a crucial role in the performance of these thermal machines.

cond-mat.mes-hall↗