arXiv subjects

Janne Kotilahti

Publications and source records attributed to Janne Kotilahti.

8 recordsLinked to original sources

arXiv2025

A Superconducting Qubit-Resonator Quantum Processor with Effective All-to-All Connectivity

In this work we introduce a superconducting quantum processor architecture that uses a transmission-line resonator to implement effective all-to-all connectivity between six transmon qubits. This architecture can be used as a test-bed for algorithms that benefit from high connectivity. We show that the central resonator can be used as a computational element, which offers the flexibility to encode a qubit for quantum computation or to utilize its bosonic modes which further enables quantum simulation of bosonic systems. To operate the quantum processing unit (QPU), we develop and benchmark the qubit-resonator conditional Z gate and the qubit-resonator MOVE operation. The latter allows for transferring a quantum state between one of the peripheral qubits and the computational resonator. We benchmark the QPU performance and achieve a genuinely multi-qubit entangled Greenberger-Horne-Zeilinger (GHZ) state over all six qubits with a readout-error mitigated fidelity of $0.86$.

quant-ph↗

arXiv2024

Technology and Performance Benchmarks of IQM's 20-Qubit Quantum Computer

Quantum computing has tremendous potential to overcome some of the fundamental limitations present in classical information processing. Yet, today's technological limitations in the quality and scaling prevent exploiting its full potential. Quantum computing based on superconducting quantum processing units (QPUs) is among the most promising approaches towards practical quantum advantage. In this article the basic technological approach of IQM Quantum Computers is described covering both the QPU and the rest of the full-stack quantum computer. In particular, the focus is on a 20-qubit quantum computer featuring the Garnet QPU and its architecture, which we will scale up to 150 qubits. We also present QPU and system-level benchmarks, including a median 2-qubit gate fidelity of 99.5% and genuinely entangling all 20 qubits in a Greenberger-Horne-Zeilinger (GHZ) state.

quant-ph↗

arXiv2024

Open Hardware Solutions in Quantum Technology

Quantum technologies such as communications, computing, and sensing offer vast opportunities for advanced research and development. While an open-source ethos currently exists within some quantum technologies, especially in quantum computer programming, we argue that there are additional advantages in developing open quantum hardware (OQH). Open quantum hardware encompasses open-source software for the control of quantum devices in labs, blueprints and open-source toolkits for chip design and other hardware components, as well as openly-accessible testbeds and facilities that allow cloud-access to a wider scientific community. We provide an overview of current projects in the OQH ecosystem, identify gaps, and make recommendations on how to close them today. More open quantum hardware would accelerate technology transfer to and growth of the quantum industry and increase accessibility in science.

physics.app-ph↗

arXiv2022

Long-distance transmon coupler with CZ gate fidelity above $99.8\%$

Tunable coupling of superconducting qubits has been widely studied due to its importance for isolated gate operations in scalable quantum processor architectures. Here, we demonstrate a tunable qubit-qubit coupler based on a floating transmon device which allows us to place qubits at least 2 mm apart from each other while maintaining over 50 MHz coupling between the coupler and the qubits. In the introduced tunable-coupler design, both the qubit-qubit and the qubit-coupler couplings are mediated by two waveguides instead of relying on direct capacitive couplings between the components, reducing the impact of the qubit-qubit distance on the couplings. This leaves space for each qubit to have an individual readout resonator and a Purcell filter needed for fast high-fidelity readout. In addition, the large qubit-qubit distance reduces unwanted non-nearest neighbor coupling and allows multiple control lines to cross over the structure with minimal crosstalk. Using the proposed flexible and scalable architecture, we demonstrate a controlled-$Z$ gate with $(99.81 \pm 0.02)\%$ fidelity.

quant-ph↗

arXiv2022

Unimon qubit

Superconducting qubits are one of the most promising candidates to implement quantum computers. The superiority of superconducting quantum computers over any classical device in simulating random but well-determined quantum circuits has already been shown in two independent experiments and important steps have been taken in quantum error correction. However, the currently wide-spread qubit designs do not yet provide high enough performance to enable practical applications or efficient scaling of logical qubits owing to one or several following issues: sensitivity to charge or flux noise leading to decoherence, too weak non-linearity preventing fast operations, undesirably dense excitation spectrum, or complicated design vulnerable to parasitic capacitance. Here, we introduce and demonstrate a superconducting-qubit type, the unimon, which combines the desired properties of high non-linearity, full insensitivity to dc charge noise, insensitivity to flux noise, and a simple structure consisting only of a single Josephson junction in a resonator. We measure the qubit frequency, $ω_{01}/(2π)$, and anharmonicity $α$ over the full dc-flux range and observe, in agreement with our quantum models, that the qubit anharmonicity is greatly enhanced at the optimal operation point, yielding, for example, 99.9% and 99.8% fidelity for 13-ns single-qubit gates on two qubits with $(ω_{01},α)=(4.49~\mathrm{GHz}, 434~\mathrm{ MHz})\times 2π$ and $(3.55~\mathrm{GHz}, 744~\mathrm{ MHz})\times 2π$, respectively. The energy relaxation time $T_1\lesssim 10~μ\mathrm{s}$ is stable for hours and seems to be limited by dielectric losses. Thus, future improvements of the design, materials, and gate time may promote the unimon to break the 99.99% fidelity target for efficient quantum error correction and possible quantum advantage with noisy systems.

quant-ph↗

arXiv2021

Multi-particle interference in an electronic Mach-Zehnder interferometer

The recent development of dynamic single-electron sources makes it possible to observe and manipulate the quantum properties of individual charge carriers in mesoscopic circuits. Here, we investigate multi-particle effects in an electronic Mach-Zehnder interferometer driven by dynamic voltage pulses. To this end, we employ a Floquet scattering formalism to evaluate the interference current and the visibility in the outputs of the interferometer. An injected multi-particle state can be described by its first-order correlation function, which we decompose into a sum of elementary correlation functions that each represent a single particle. Each particle in the pulse contributes independently to the interference current, while the visibility (determined by the maximal interference current) exhibits a Fraunhofer-like diffraction pattern caused by the multi-particle interference between different particles in the pulse. For a sequence of multi-particle pulses, the visibility resembles the diffraction pattern from a grid, with the role of the grid and the spacing between the slits being played by the pulses and the time delay between them. Our findings may be observed in future experiments by injecting multi-particle pulses into an electronic Mach-Zehnder interferometer.

cond-mat.mes-hall↗

arXiv2019

Composite two-particle sources

Multi-particle sources constitute an interesting new paradigm following the recent development of on-demand single-electron sources. Versatile devices can be designed using several single-electron sources, possibly of different types, coupled to the same quantum circuit. However, if combined \textit{non-locally} to avoid cross-talk, the resulting architecture becomes very sensitive to electronic decoherence. To circumvent this problem, we here analyse two-particle sources that operate with several single-electron (or hole) emitters attached in series to the same electronic waveguide. We demonstrate how such a device can emit exactly two electrons without exciting unwanted electron-hole pairs if the driving is adiabatic. Going beyond the adiabatic regime, perfect two-electron emission can be achieved by driving two quantum dot levels across the Fermi level of the external reservoir. If a single-electron source is combined with a source of holes, the emitted particles can annihilate each other in a process which is governed by the overlap of their wave functions. Importantly, the degree of annihilation can be controlled by tuning the emission times, and the overlap can be determined by measuring the shot noise after a beam splitter. In contrast to a Hong-Ou-Mandel experiment, the wave functions overlap close to the emitters and not after propagating to the beam splitter, making the shot noise reduction less susceptible to electronic decoherence.

cond-mat.mes-hall↗

arXiv2018

Time-Domain Spectroscopy of Mesoscopic Conductors Using Voltage Pulses

The development of single-electron sources has paved the way for a novel type of experiments in which individual electrons are emitted into a quantum-coherent circuit. In one approach, single-electron excitations are generated by applying Lorentzian-shaped voltage pulses to a contact. Here, we propose to use such voltage pulses for electronic spectroscopy of mesoscopic devices. Specifically, we show how characteristic timescales of a quantum-coherent conductor can be extracted from the distribution of waiting times between charge pulses propagating through a mesoscopic circuit. To illustrate our idea, we employ Floquet scattering theory to evaluate the electron waiting times for an electronic Fabry-Pérot cavity and a Mach-Zehnder interferometer. We discuss the perspectives for an experimental realization of our proposal and identify possible avenues for further developments.

cond-mat.mes-hall↗