arXiv subjects

Jannik C. Meyer

Publications and source records attributed to Jannik C. Meyer.

At least 19 recordsLinked to original sources

arXiv2026

Atomistic Origin of Photoluminescence Quenching in Colloidal MoS2 and WS2 Nanoplatelets

Large chemical tunability and strong light-matter interactions make colloidal transition metal dichalcogenide (TMD) nanostructures particularly suitable for light-emitting applications. However, ultrafast exciton decay and quenched photoluminescence (PL) limit their potential. Combining femtosecond transient absorption spectroscopy with first-principles calculations on MoS2 and WS2 nanoplatelets, we reveal that the observed sub-picosecond exciton decay originates from edge-located optically bright hole traps. These intrinsic trap states stem from the metal d-orbitals and persist even when the sulfur-terminated edges are hydrogen-passivated. Notably, WS2 nanostructures show more localized and optically active edge states than their MoS2 counterparts, and zigzag edges exhibit a higher trap density than armchair edges. The nanoplatelet size dictates the competition between ultrafast edge-trapping and slower core-exciton recombination, and the states responsible for exciton quenching enhance catalytic activity. Our work represents an important step forward in understanding exciton quenching in TMD nanoplatelets and stimulates additional research to refine physicochemical protocols for enhanced PL.

cond-mat.mtrl-sci↗

arXiv2025

Hexatic Phase in Covalent Two-Dimensional Silver Iodide

According to the Kosterlitz-Thouless-Halperin-Nelson-Young (KTHNY) theory, the transition from a solid to liquid in two dimensions proceeds through an orientationally ordered liquid-like hexatic phase. However, alternative mixed melting scenarios, in which melting proceeds through the hexatic phase with both continuous and discontinuous transitions, have also been observed in some two-dimensional systems. In this study, we imaged silver iodide embedded in multilayer graphene using time- and temperature-resolved in situ atomic-resolution scanning transmission electron microscopy and nanobeam electron diffraction. We observed the hexatic phase and provide evidence supporting a mixed melting scenario.

cond-mat.mtrl-sci↗

arXiv2024

Solving the Synthetic Riddle of Colloidal 2D PbTe Nanoplatelets with Tunable Near-Infrared Emission

Near-infrared emitting colloidal two-dimensional (2D) PbX (X=S, Se) nanoplatelets have emerged as interesting materials with strong size quantisation in the thickness dimension. They act as model systems for efficient charge carrier multiplication and hold potential as intriguing candidates for finer-based photonic quantum applications. However, synthetic access to the third family member, 2D PbTe, remains elusive due to a challenging precursor chemistry. Here, we report a direct synthesis for 2D PbTe nanoplatelets (NPLs) with unable photoluminescence (PL, 910-1460 nm (1.36-0.85 eV), PLQY 1-15 %), based on aminophosphine precursor chemistry. Ex-situ transamination of tris(dimethylamino)phosphine telluride with octylamine is confirmed by 31P NMR and yields a reactive tellurium precursor for the formation of 2D PbTe NPLs at temperatures as low as 0 °C. The PL position of the PbTe NPLs is unable by controlling the Pb:Te ration in the reaction. GIWAXS confirms the 2D geometry of the NPLs and the formation of superlattices. The importance of a post-synthetic passivation of the PbTe NPLs by PbI2 to ensure colloidal stability of the otherwise oxygen sensitive samples is supported by X-ray photoelectron spectroscopy. Our results expand and complete the row of lead chalcogenide-based 2D NPLs, opening up new ways for further pushing the optical properties of 2D NPLs into the infrared and toward technologically relevant wavelengths.

cond-mat.mes-hall↗

arXiv2021

Towards Exotic Layered Materials: 2D Cuprous Iodide

Heterostructures composed of two-dimensional (2D) materials are already opening many new possibilities in such fields of technology as electronics and magnonics, but far more could be achieved if the number and diversity of 2D materials is increased. So far, only a few dozen 2D crystals have been extracted from materials that exhibit a layered phase in ambient conditions, omitting entirely the large number of layered materials that may exist in other temperatures and pressures. Here, we demonstrate how these structures can be stabilized in 2D van der Waals stacks under room temperature via growing them directly in graphene encapsulation by using graphene oxide as the template material. Specifically, we produce an ambient stable 2D structure of copper and iodine, a material that normally only occurs in layered form at elevated temperatures between 645 and 675 K. Our results establish a route to the production of more exotic phases of materials that would otherwise be difficult or impossible to stabilize for experiments in ambient.

cond-mat.mtrl-sci↗

arXiv2021

Aligned Stacking of Nanopatterned 2D materials -- Towards 3D printing at atomic resolution

Two-dimensional materials can be combined by placing individual layers on top of each other, so that they are bound only by their van der Waals interaction. The sequence of layers can be chosen arbitrarily, enabling an essentially atomic-level control of the material and thereby a wide choice of properties along one dimension. However, simultaneous control over the structure in the in-plane directions is so far still rather limited. Here, we combine spatially controlled modifications of 2D materials, using focused electron irradiation or electron beam induced etching, with the layer-by-layer assembly of van der Waals heterostructures. A novel assembly process makes it possible to structure each layer with an arbitrary pattern prior to the assembly into the heterostructure. Moreover, it enables a stacking of the layers with accurate lateral alignment, with an accuracy of currently 10nm, under observation in an electron microscope. Together, this enables the fabrication of almost arbitrary 3D structures with highest spatial resolution.

physics.app-ph↗

arXiv2021

Direct observation of layer-stacking and oriented wrinkles in multilayer hexagonal boron nitride

Hexagonal boron nitride (h-BN) has long been recognized as an ideal substrate for electronic devices due to its dangling-bond-free surface, insulating nature and thermal/chemical stability. Therefore, to analyse the lattice structure and orientation of h-BN crystals becomes important. Here, the stacking order and wrinkles of h-BN are investigated by transmission electron microscopy (TEM). It is experimentally confirmed that the layers in the h-BN flakes are arranged in the AA' stacking. The wrinkles in a form of threefold network throughout the h-BN crystal are oriented along the armchair direction, and their formation mechanism was further explored by molecular dynamics simulations. Our findings provide a deep insight about the microstructure of h-BN and shed light on the structural design/electronic modulations of two-dimensional crystals.

cond-mat.mtrl-sci↗

arXiv2020

Chemistry at graphene edges in the electron microscope

Transmission electron microscopy (TEM) and scanning TEM (STEM) are indispensable tools for materials characterization. However, during a typical (S)TEM experiment, the sample is subject to a number of effects that can change its atomic structure. Of these, perhaps the least discussed are chemical modifications due to the non-ideal vacuum around the sample. With single-layer graphene, we show that even at relatively low pressures typical for many instruments, these processes can have a significant impact on the sample structure. For example, pore growth becomes up to two orders of magnitude faster at a pressure of ca. 10^{-6} mbar as compared to ultra-high vacuum (UHV; 10^{-10} mbar). Even more remarkably,the presence of oxygen at the sample also changes the observed atomic structure: When imaged in UHV, nearly 90% of the identifiable graphene edge configurations have the armchair structure, whereas armchair and zigzag structures are nearly equally likely to occur when the oxygen partial pressure in the column is higher. Our results both bring attention to the role of the often neglected vacuum composition of the microscope column, and show that control over it can allow atomic-scale tailoring of the specimen structure.

cond-mat.mtrl-sci↗

arXiv2020

Towards Chirality Control of Graphene Nanoribbons Embedded in Hexagonal Boron Nitride

The integrated inplane growth of two dimensional materials with similar lattices, but distinct electrical properties, could provide a promising route to achieve integrated circuitry of atomic thickness. However, fabrication of edge specific GNR in the lattice of hBN still remains an enormous challenge for present approaches. Here we developed a two step growth method and successfully achieved sub 5 nm wide zigzag and armchair GNRs embedded in hBN, respectively. Further transport measurements reveal that the sub 7 nm wide zigzag GNRs exhibit openings of the band gap inversely proportional to their width, while narrow armchair GNRs exhibit some fluctuation in the bandgap width relationship.This integrated lateral growth of edge specific GNRs in hBN brings semiconducting building blocks to atomically thin layer, and will provide a promising route to achieve intricate nanoscale electrical circuits on high quality insulating hBN substrates.

cond-mat.mes-hall↗

arXiv2020

Resolving Few-Layer Antimonene/Graphene Heterostructures

Two-dimensional (2D) antimony (Sb, antimonene) recently attracted interest due to its peculiar electronic properties and its suitability as anode material in next generation batteries. Sb however exhibits a large polymorphic/allotropic structural diversity, which is also influenced by the Sb's support. Thus understanding Sb heterostructure formation is key in 2D Sb integration. Particularly 2D Sb/graphene interfaces are of prime importance as contacts in electronics and electrodes in batteries. We thus study here few-layered 2D Sb/graphene heterostructures by atomic-resolution (scanning) transmission electron microscopy. We find the co-existence of two Sb morphologies: First is a 2D growth morphology of layered beta-Sb with beta-Sb(001)||graphene(001) texture. Second are one-dimensional (1D) Sb nanowires which can be matched to beta-Sb with beta-Sb[2-21] perpendicular to graphene(001) texture and are structurally also closely related to thermodynamically non-preferred cubic Sb(001)||graphene(001). Importantly, both Sb morphologies show rotational van-der-Waals epitaxy with the graphene support. Both Sb morphologies are well resilient against environmental bulk oxidation, although superficial Sb-oxide layer formation merits consideration, including formation of novel epitaxial Sb2O3(111)/beta-Sb(001) heterostructures. Exact Sb growth behavior is sensitive on employed processing and substrate properties including, notably, the nature of the support underneath the direct graphene support. This introduces the substrate underneath a direct 2D support as a key parameter in 2D Sb heterostructure formation. Our work provides insights into the rich phase and epitaxy landscape in 2D Sb and 2D Sb/graphene heterostructures.

cond-mat.mtrl-sci↗

arXiv2020

Single indium atoms and few-atom indium clusters anchored onto graphene via silicon heteroatoms

Single atoms and few-atom nanoclusters are of high interest in catalysis and plasmonics, but pathways for their fabrication and stable placement remain scarce. We report here the self-assembly of room-temperature-stable single indium (In) atoms and few-atom In clusters (2-6 atoms) that are anchored to substitutional silicon (Si) impurity atoms in suspended monolayer graphene membranes. Using atomically resolved scanning transmission electron microscopy (STEM), we find that the exact atomic arrangements of the In atoms depend strongly on the original coordination of the Si anchors in the graphene lattice: Single In atoms and In clusters with 3-fold symmetry readily form on 3-fold coordinated Si atoms, whereas 4-fold symmetric clusters are found attached to 4-fold coordinated Si atoms. All structures are produced by our fabrication route without the requirement for electron-beam induced materials modification. In turn, when activated by electron beam irradiation in the STEM, we observe in situ the formation, restructuring and translation dynamics of the Si-anchored In structures: Hexagon-centered 4-fold symmetric In clusters can (reversibly) transform into In chains or In dimers, whereas C-centered 3-fold symmetric In clusters can move along the zig-zag direction of the graphene lattice due to the migration of Si atoms during electron-beam irradiation, or transform to Si-anchored single In atoms. Our results provide a novel framework for the controlled self-assembly and heteroatomic anchoring of single atoms and few-atom clusters on graphene.

cond-mat.mtrl-sci↗

arXiv2019

Quantifying transmission electron microscopy irradiation effects using two-dimensional materials

Important recent advances in transmission electron microscopy instrumentation and capabilities have made it indispensable for atomic-scale materials characterization. At the same time, the availability of two-dimensional materials has provided ideal samples where each atom or vacancy can be resolved. Recent studies have also revealed new possibilities for a different application of focused electron irradiation: the controlled manipulation of structures and even individual atoms. Evaluating the full range of future possibilities for this method requires a precise physical understanding of the interactions of electrons with energies as low as 15 keV now used in (scanning) transmission electron microscopy, becoming feasible due to advances both in experimental techniques and in theoretical models. We summarize the state of current knowledge of the underlying physical processes based on the latest results on two-dimensional materials, with a focus on the physical principles of the electron-matter interaction, rather than the material-specific irradiation-induced defects it causes.

cond-mat.mtrl-sci↗

arXiv2019

Resolving the Nucleation Stage in Atomic Layer Deposition of Hafnium Oxide on Graphene

The integration of two-dimensional (2D) materials with functional non-2D materials such as metal oxides is of key importance for many applications, but underlying mechanisms for such non-2D/2D interfacing remain largely elusive at the atomic scale. To address this, we here investigate the nucleation stage in atomic layer deposition (ALD) of the important metal oxide HfO2 on chemical vapor deposited graphene using atomically resolved and element specific scanning transmission electron microscopy (STEM). To avoid any deleterious influence of polymer residues from pre-ALD graphene transfers we employ a substrate-assisted ALD process directly on the as grown graphene still remaining on its Cu growth catalyst support. Thereby we resolve at the atomic scale key factors governing the integration of non-2D metal oxides with 2D materials by ALD: Particular to our substrate-assisted ALD process we find a graphene-layer-dependent catalytic participation of the supporting Cu catalyst in the ALD process. We further confirm at high resolution the role of surface irregularities such as steps between graphene layers on oxide nucleation. Employing the energy transfer from the scanning electron beam to in situ crystallize the initially amorphous ALD HfO2 on graphene, we observe HfO2 crystallization to non-equilibrium HfO2 polymorphs (cubic/tetragonal). Finally our data indicates a critical role of the graphene's atmospheric adventitious carbon contamination on the ALD process whereby this contamination acts as an unintentional seeding layer for metal oxide ALD nucleation on graphene under our conditions. As atmospheric adventitious carbon contamination is hard to avoid in any scalable 2D materials processing, this is a critical factor in ALD recipe development for 2D materials coating. Combined our work highlights several key mechanisms underlying scalable ALD oxide growth on 2D materials.

cond-mat.mtrl-sci↗

arXiv2019

Scanning transmission electron microscopy under controlled low-pressure atmospheres

Transmission electron microscopy (TEM) is carried out in vacuum to minimize the interaction of the imaging electrons with gas molecules while passing through the microscope column. Nevertheless, in typical devices, the pressure remains at 10^-7 mbar or above, providing a large number of gas molecules for the electron beam to crack, which can lead to structural changes in the sample. Here, we describe experiments carried out in a modified scanning TEM (STEM) instrument, based on the Nion UltraSTEM 100. In this instrument, the base pressure at the sample is around 2x10^-10 mbar, and can be varied up to 10^-6 mbar through introduction of gases directly into the objective area while maintaining atomic resolution imaging conditions. We show that air leaked into the microscope column during the experiment is efficient in cleaning graphene samples from contamination, but ineffective in damaging the pristine lattice. Our experiments also show that exposure to O2 and H2O lead to a similar result, oxygen providing an etching effect nearly twice as efficient as water, presumably due to the two O atoms per molecule. H2 and N2 environments have no influence on etching. These results show that the residual gas environment in typical TEM instruments can have a large influence on the observations, and show that chemical etching of carbon-based structures can be effectively carried out with oxygen.

cond-mat.mes-hall↗

arXiv2018

Computational insights and the observation of SiC nanograin assembly: towards 2D silicon carbide

While an increasing number of two-dimensional (2D) materials, including graphene and silicene, have already been realized, others have only been predicted. An interesting example is the two-dimensional form of silicon carbide (2D-SiC). Here, we present an observation of atomically thin and hexagonally bonded nanosized grains of SiC assembling temporarily in graphene oxide pores during an atomic resolution scanning transmission electron microscopy experiment. Even though these small grains do not fully represent the bulk crystal, simulations indicate that their electronic structure already approaches that of 2D-SiC. This is predicted to be flat, but some doubts have remained regarding the preference of Si for sp$^{3}$ hybridization. Exploring a number of corrugated morphologies, we find completely flat 2D-SiC to have the lowest energy. We further compute its phonon dispersion, with a Raman-active transverse optical mode, and estimate the core level binding energies. Finally, we study the chemical reactivity of 2D-SiC, suggesting it is like silicene unstable against molecular absorption or interlayer linking. Nonetheless, it can form stable van der Waals-bonded bilayers with either graphene or hexagonal boron nitride, promising to further enrich the family of two-dimensional materials once bulk synthesis is achieved.

cond-mat.mtrl-sci↗

arXiv2018

Efficient first principles simulation of electron scattering factors for transmission electron microscopy

Electron microscopy is a powerful tool for studying the properties of materials down to their atomic structure. In many cases, the quantitative interpretation of images requires simulations based on atomistic structure models. These typically use the independent atom approximation that neglects bonding effects, which may, however, be measurable and of physical interest. Since all electrons and the nuclear cores contribute to the scattering potential, simulations that go beyond this approximation have relied on computationally highly demanding all-electron calculations. Here, we describe a new method to generate ab initio electrostatic potentials when describing the core electrons by projector functions. Combined with an interface to quantitative image simulations, this implementation enables an easy and fast means to model electron microscopy images. We compare simulated transmission electron microscopy images and diffraction patterns to experimental data, showing an accuracy equivalent to earlier all-electron calculations at a much lower computational cost.

cond-mat.mtrl-sci↗

arXiv2018

Direct visualization of the 3D structure of silicon impurities in graphene

We directly visualize the three-dimensional (3D) geometry and dynamics of silicon impurities in graphene as well as their dynamics by aberration-corrected scanning transmission electron microscopy. By acquiring images when the sample is tilted, we show that an asymmetry of the atomic position of the heteroatom in the projection reveals the non-planarity of the structure. From a sequence of images, we further demonstrate that the Si atom switches between up- and down- configurations with respect to the graphene plane, with an asymmetric cross-section. We further analyze the 3D structure and dynamics of a silicon tetramer in graphene. Our results clarify the out-of-plane structure of impurities in graphene by direct experimental observation and open a new route to study their dynamics in three dimensions.

physics.app-ph↗

arXiv2018

Intrinsic core level photoemission of suspended graphene

X-ray photoelectron spectroscopy of graphene is important both for its characterization and as a model for other carbon materials. Despite great recent interest, the intrinsic photoemission of its single layer has not been unambiguously measured, nor is the layer-dependence in free-standing multilayers accurately determined. We combine scanning transmission electron microscopy and Raman spectroscopy with synchrotron-based scanning photoelectron microscopy to characterize the same areas of suspended graphene samples down to the atomic level. This allows us to assign spectral signals to regions of precisely known layer number and purity. The core level binding energy of the monolayer is measured at 284.70 eV, thus 0.28 eV higher than that of graphite, with intermediate values found for few layers. This trend is reproduced by density functional theory with or without explicit van der Waals interactions, indicating that intralayer charge rearrangement dominates, but in our model of static screening the magnitudes of the shifts are underestimated by half.

cond-mat.mtrl-sci↗

arXiv2018

Revealing the 3D Structure of Graphene Defects

We demonstrate insights into the three-dimensional structure of defects in graphene, in particular grain boundaries, obtained via a new approach from two transmission electron microscopy images recorded at different angles. The structure is obtained through an optimization process where both the atomic positions as well as the simulated imaging parameters are iteratively changed until the best possible match to the experimental images is found. We first demonstrate that this method works using an embedded defect in graphene that allows direct comparison to the computationally predicted three-dimensional shape. We then applied the method to a set of grain boundary structures with misorientation angles nearly spanning the whole available range (2.6-29.8°). The measured height variations at the boundaries reveal a strong correlation with the misorientation angle with lower angles resulting in stronger corrugation and larger kink angles. Our results allow for the first time a direct comparison with theoretical predictions for the corrugation at grain boundaries and we show that the measured kink angles are significantly smaller than the largest predicted ones.

physics.app-ph↗