arXiv subjects

Jannis Clausius

Publications and source records attributed to Jannis Clausius.

16 recordsLinked to original sources

arXiv2026

Towards a Unified Coding Scheme for 6G

The growing demand for higher data rates necessitates continuous innovations in wireless communication systems, particularly with the emergence of 6G. Channel coding plays a crucial role in this evolution. In 5G systems, rate-adaptive raptor-like quasi-cyclic irregular low-density parity-check codes are used for the data link, while polar codes with successive cancellation list decoding handle short messages on the synchronization channel. However, to meet the stringent requirements of future 6G systems, a versatile and unified coding scheme should be developed - one that offers competitive error-correcting performance alongside low complexity encoding and decoding schemes that enable energy-efficient hardware implementations. This white paper outlines the vision for such a unified coding scheme. We explore various 6G communication scenarios that pose new challenges to channel coding and provide a first analysis of potential solutions.

cs.IT↗

arXiv2025

Signal Space-Transformed Expectation Propagation for Symbol Detection in ISI Channels

Iterative message passing detection based on expectation propagation (EP) has demonstrated near-optimum performance in many signal processing and communication scenarios. The method remains feasible even for channel impulse responses (CIRs), where the optimal Bahl-Cocke-Jelinek-Raviv (BCJR) detector is infeasible. However, significant performance degradation occurs for channels with strong inter-symbol interference (ISI), where the initial linear minimum mean square error (LMMSE) estimate is inaccurate. We propose an EP-based detector that operates in a transformed signal space. Specifically, instead of the conventional approach that iterates between an LMMSE estimator and a non-linear symbol-wise demapper, the proposed method iterates between a linear channel shortening filter-based estimator and a non-linear BCJR detector with reduced memory compared to the actual channel. Additionally, we propose a deliberate mismatch between the initialized messages and the initialized covariance used in the linear estimator in the first iteration for faster convergence. The proposed approach is evaluated for the well-known Proakis-C ISI channel and for CIRs from a wireless measurement campaign. We demonstrate improvements of up to 6 dB at 2 bits per channel use and an improved performance-complexity trade-off over conventional EP-based detection

cs.IT↗

arXiv2025

Joint Detection and Decoding: A Graph Neural Network Approach

Narrowing the performance gap between optimal and feasible detection in inter-symbol interference (ISI) channels, this paper proposes to use graph neural networks (GNNs) for detection that can also be used to perform joint detection and decoding (JDD). For detection, the GNN is build upon the factor graph representations of the channel, while for JDD, the factor graph is expanded by the Tanner graph of the parity-check matrix (PCM) of the channel code, sharing the variable nodes (VNs). A particularly advantageous property of the GNN is a) the robustness against cycles in the factor graphs which is the main problem for sum-product algorithm (SPA)-based detection, and b) the robustness against channel state information (CSI) uncertainty at the receiver. Additionally, we propose using an input embedding resulting in a GNN independent of the channel impulse response (CIR). Consequently, a fully deep learning-based receiver enables joint optimization instead of individual optimization of the components, so-called end-to-end learning. Furthermore, we propose a parallel flooding schedule that also reduces the latency, which turns out to improve the error correcting performance. The proposed approach is analyzed and compared to state-of-the-art baselines for different modulations and codes in terms of error correcting capability and latency. The gain compared to SPA-based detection might be explained with improved messages between nodes and adaptive damping of messages. For a higher order modulation in a high-rate turbo detection and decoding (TDD) scenario the GNN shows a, at first glance, surprisingly high gain of 6.25 dB compared to the best, feasible non-neural baseline.

cs.IT↗

arXiv2024

A Comparative Study of Ensemble Decoding Methods for Short Length LDPC Codes

To alleviate the suboptimal performance of belief propagation (BP) decoding of short low-density parity-check (LDPC) codes, a plethora of improved decoding algorithms has been proposed over the last two decades. Many of these methods can be described using the same general framework, which we call ensemble decoding: A set of independent constituent decoders works in parallel on the received sequence, each proposing a codeword candidate. From this list, the maximum likelihood (ML) decision is designated as the decoder output. In this paper, we qualitatively and quantitatively compare different realizations of the ensemble decoder, namely multiple-bases belief propagation (MBBP), automorphism ensemble decoding (AED), scheduling ensemble decoding (SED), noise-aided ensemble decoding (NED) and saturated belief propagation (SBP). While all algorithms can provide gains over traditional BP decoding, ensemble methods that exploit the code structure, such as MBBP and AED, typically show greater performance improvements.

cs.IT↗

arXiv2024

Bounds for Joint Detection and Decoding on the Binary-Input AWGN Channel

For asynchronous transmission of short blocks, preambles for packet detection contribute a non-negligible overhead. To reduce the required preamble length, joint detection and decoding (JDD) techniques have been proposed that additionally utilize the payload part of the packet for detection. In this paper, we analyze two instances of JDD, namely hybrid preamble and energy detection (HyPED) and decoder-aided detection (DAD). While HyPED combines the preamble with energy detection for the payload, DAD also uses the output of a channel decoder. For these systems, we propose novel achievability and converse bounds for the rates over the binary-input additive white Gaussian noise (BI-AWGN) channel. Moreover, we derive a general bound on the required blocklength for JDD. Both the theoretical bound and the simulation of practical codebooks show that the rate of DAD quickly approaches that of synchronous transmission.

cs.IT↗

arXiv2024

Graph Neural Network-based Joint Equalization and Decoding

This paper proposes to use graph neural networks (GNNs) for equalization, that can also be used to perform joint equalization and decoding (JED). For equalization, the GNN is build upon the factor graph representations of the channel, while for JED, the factor graph is expanded by the Tanner graph of the parity-check matrix (PCM) of the channel code, sharing the variable nodes (VNs). A particularly advantageous property of the GNN is the robustness against cycles in the factor graphs which is the main problem for belief propagation (BP)-based equalization. As a result of having a fully deep learning-based receiver, joint optimization instead of individual optimization of the components is enabled, so-called end-to-end learning. Furthermore, we propose a parallel flooding schedule that further reduces the latency, which turns out to improve also the error correcting performance. The proposed approach is analyzed and compared to state-of-the-art baselines in terms of error correcting capability and latency. At a fixed low latency, the flooding GNN for JED demonstrates a gain of 2.25 dB in bit error rate (BER) compared to an iterative Bahl--Cock--Jelinek--Raviv (BCJR)-BP baseline.

cs.IT↗

arXiv2023

Component Training of Turbo Autoencoders

Isolated training with Gaussian priors (TGP) of the component autoencoders of turbo-autoencoder architectures enables faster, more consistent training and better generalization to arbitrary decoding iterations than training based on deep unfolding. We propose fitting the components via extrinsic information transfer (EXIT) charts to a desired behavior which enables scaling to larger message lengths ($k \approx 1000$) while retaining competitive performance. To the best of our knowledge, this is the first autoencoder that performs close to classical codes in this regime. Although the binary cross-entropy (BCE) loss function optimizes the bit error rate (BER) of the components, the design via EXIT charts enables to focus on the block error rate (BLER). In serially concatenated systems the component-wise TGP approach is well known for inner components with a fixed outer binary interface, e.g., a learned inner code or equalizer, with an outer binary error correcting code. In this paper we extend the component training to structures with an inner and outer autoencoder, where we propose a new 1-bit quantization strategy for the encoder outputs based on the underlying communication problem. Finally, we discuss the model complexity of the learned components during design time (training) and inference and show that the number of weights in the encoder can be reduced by 99.96 %.

cs.IT↗

arXiv2023

Optimizing Serially Concatenated Neural Codes with Classical Decoders

For improving short-length codes, we demonstrate that classic decoders can also be used with real-valued, neural encoders, i.e., deep-learning based codeword sequence generators. Here, the classical decoder can be a valuable tool to gain insights into these neural codes and shed light on weaknesses. Specifically, the turbo-autoencoder is a recently developed channel coding scheme where both encoder and decoder are replaced by neural networks. We first show that the limited receptive field of convolutional neural network (CNN)-based codes enables the application of the BCJR algorithm to optimally decode them with feasible computational complexity. These maximum a posteriori (MAP) component decoders then are used to form classical (iterative) turbo decoders for parallel or serially concatenated CNN encoders, offering a close-to-maximum likelihood (ML) decoding of the learned codes. To the best of our knowledge, this is the first time that a classical decoding algorithm is applied to a non-trivial, real-valued neural code. Furthermore, as the BCJR algorithm is fully differentiable, it is possible to train, or fine-tune, the neural encoder in an end-to-end fashion.

cs.IT↗

arXiv2023

Phase-Equivariant Polar Coded Modulation

For short-packet, low-latency communications over random access channels, piloting overhead significantly reduces spectral efficiency. Therefore, pilotless systems recently gained attraction. While blind phase estimation algorithms such as Viterbi-Viterbi Phase Estimation (VVPE) can correct a phase offset using only payload symbols, a phase ambiguity remains. We first show that the remaining phase rotations in a polar coded quadrature amplitude modulation (QAM) transmission with gray labeling are combinations of bit-flips and automorphisms. Therefore, the decoder is equivariant to such phase rotations and, by smartly selecting the frozen bits, one can jointly decode and resolve the phase ambiguity, without the need for pilot symbols or an outer code. Our proposed system outperforms pilot-assisted transmissions by up to 0.8 dB and 2 dB for quaternary phase shift keying (QPSK) and 16-QAM, respectively.

cs.IT↗

arXiv2023

Rate-Compatible Polar Codes for Automorphism Ensemble Decoding

Recently, automorphism ensemble decoding (AED) has drawn research interest as a more computationally efficient alternative to successive cancellation list (SCL) decoding of polar codes. Although AED has demonstrated superior performance for specific code parameters, a flexible code design that can accommodate varying code rates does not yet exist. This work proposes a theoretical framework for constructing rate-compatible polar codes with a prescribed automorphism group, which is a key requirement for AED. We first prove that a one-bit granular sequence with useful automorphisms cannot exist. However, by allowing larger steps in the code dimension, flexible code sequences can be constructed. An explicit synthetic channel ranking based on the $β$-expansion is then proposed to ensure that all constructed codes possess the desired symmetries. Simulation results, covering a broad range of code dimensions and blocklengths, show a performance comparable to that of 5G polar codes under cyclic redundancy check (CRC)-aided SCL decoding, however, with lower complexity.

cs.IT↗

arXiv2022

Graph Search based Polar Code Design

It is well known that to fulfill their full potential, the design of polar codes must be tailored to their intended decoding algorithm. While for successive cancellation (SC) decoding, information theoretically optimal constructions are available, the code design for other decoding algorithms (such as belief propagation (BP) decoding) can only be optimized using extensive Monte Carlo simulations. We propose to view the design process of polar codes as a graph search problem and thereby approaching it more systematically. Based on this formalism, the design-time complexity can be significantly reduced compared to state-of-the-art Genetic Algorithm (GenAlg) and deep learning-based design algorithms. Moreover, sequences of rate-compatible polar codes can be efficiently found. Finally, we analyze both the complexity of the proposed algorithm and the error-rate performance of the constructed codes.

cs.IT↗

arXiv2022

Learning Quantization in LDPC Decoders

Finding optimal message quantization is a key requirement for low complexity belief propagation (BP) decoding. To this end, we propose a floating-point surrogate model that imitates quantization effects as additions of uniform noise, whose amplitudes are trainable variables. We verify that the surrogate model closely matches the behavior of a fixed-point implementation and propose a hand-crafted loss function to realize a trade-off between complexity and error-rate performance. A deep learning-based method is then applied to optimize the message bitwidths. Moreover, we show that parameter sharing can both ensure implementation-friendly solutions and results in faster training convergence than independent parameters. We provide simulation results for 5G low-density parity-check (LDPC) codes and report an error-rate performance within 0.2 dB of floating-point decoding at an average message quantization bitwidth of 3.1 bits. In addition, we show that the learned bitwidths also generalize to other code rates and channels.

cs.IT↗

arXiv2022

Learning Joint Detection, Equalization and Decoding for Short-Packet Communications

We propose and practically demonstrate a joint detection and decoding scheme for short-packet wireless communications in scenarios that require to first detect the presence of a message before actually decoding it. For this, we extend the recently proposed serial Turbo-autoencoder neural network (NN) architecture and train it to find short messages that can be, all "at once", detected, synchronized, equalized and decoded when sent over an unsynchronized channel with memory. The conceptional advantage of the proposed system stems from a holistic message structure with superimposed pilots for joint detection and decoding without the need of relying on a dedicated preamble. This results not only in higher spectral efficiency, but also translates into the possibility of shorter messages compared to using a dedicated preamble. We compare the detection error rate (DER), bit error rate (BER) and block error rate (BLER) performance of the proposed system with a hand-crafted state-of-the-art conventional baseline and our simulations show a significant advantage of the proposed autoencoder-based system over the conventional baseline in every scenario up to messages conveying k = 96 information bits. Finally, we practically evaluate and confirm the improved performance of the proposed system over-the-air (OTA) using a software-defined radio (SDR)-based measurement testbed.

cs.IT↗

arXiv2022

A Polar Subcode Approach to Belief Propagation List Decoding

Permutation decoding gained recent interest as it can exploit the symmetries of a code in a parallel fashion. Moreover, it has been shown that by viewing permuted polar codes as polar subcodes, the set of usable permutations in permutation decoding can be increased. We extend this idea to pre-transformed polar codes, such as cyclic redundancy check (CRC)-aided polar codes, which previously could not be decoded using permutations due to their lack of automorphisms. Using belief propagation (BP)-based subdecoders, we showcase a performance close to CRC-aided SCL (CA-SCL) decoding. The proposed algorithm outperforms the previously best performing iterative CRC-aided belief propagation list (CA-BPL) decoder both in error-rate performance and decoding latency.

cs.IT↗

arXiv2022

Automorphism Ensemble Decoding of Quasi-Cyclic LDPC Codes by Breaking Graph Symmetries

We consider automorphism ensemble decoding (AED) of quasi-cyclic (QC) low-density parity-check (LDPC) codes. Belief propagation (BP) decoding on the conventional factor graph is equivariant to the quasi-cyclic automorphisms and therefore prevents gains by AED. However, by applying small modifications to the parity-check matrix at the receiver side, we can break the symmetry without changing the code at the transmitter. This way, we can leverage a gain in error-correcting performance using an ensemble of identical BP decoders, without increasing the worst-case decoding latency. The proposed method is demonstrated using LDPC codes from the CCSDS, 802.11n and 5G standards and produces gains of 0.2 to 0.3 dB over conventional BP decoding. Compared to the similarly performing saturated BP (SBP), the proposed algorithm reduces the average decoding latency by more than eight times.

cs.IT↗

arXiv2021

Serial vs. Parallel Turbo-Autoencoders and Accelerated Training for Learned Channel Codes

Attracted by its scalability towards practical codeword lengths, we revisit the idea of Turbo-autoencoders for end-to-end learning of PHY-Layer communications. For this, we study the existing concepts of Turbo-autoencoders from the literature and compare the concept with state-of-the-art classical coding schemes. We propose a new component-wise training algorithm based on the idea of Gaussian a priori distributions that reduces the overall training time by almost a magnitude. Further, we propose a new serial architecture inspired by classical serially concatenated Turbo code structures and show that a carefully optimized interface between the two component autoencoders is required. To the best of our knowledge, these serial Turbo autoencoder structures are the best known neural network based learned sequences that can be trained from scratch without any required expert knowledge in the domain of channel codes.

cs.IT↗