arXiv subjects

Jared Carlson

Publications and source records attributed to Jared Carlson.

9 recordsLinked to original sources

arXiv2026

Shocks, Winds, and a Torus: The Large Binocular Telescope Interferometer (LBTI) Resolves the Active Nucleus of NGC 4151

We present mid-infrared (MIR) observations of the Seyfert 1 galaxy NGC 4151 using the Large Binocular Telescope Interferometer (LBTI). We took open-loop Fizeau images with 66-104 mas (5.8-9.1 pc) resolution in the N-band (at $8.7$ and $10.5~\mu m$), using the full resolution of the LBTI -- equivalent to that of a 28.8 m telescope. These images were complemented by AO imaging in the LM-bands ($3.7$ and $4.8~\mu m$), with 50-62 mas (4.4-5.4 pc) resolution. These images bridge the scales between previous Very Large Telescope Interferometer (VLTI)/MIDI and VLT/VISIR data, delivering ELT-like imaging resolution in the N-band. We resolve a dusty torus, (diameter 32 pc, PA$=125^{\circ}$), and detect dusty clouds within the narrow line region. Matching the resolution across four bands, we measured spatially-resolved SEDs of the central $\sim 100$ pc. Modified blackbody fitting revealed dust temperature and extinction profiles, indicating both heating from the accretion disk and additional shock heating due to the radio jet. The spatial coincidence of ionized emission (e.g., [Fe II] and [O III]), extended MIR structures, and radio features further supports the interpretation of shock heating. Comparison with NGC 1068 tests the Unified Model of Active Galactic Nuclei (Unified Model of AGN): Structures are similar, despite differences in orientation and Eddington ratio. NGC 4151's torus is smaller than NGC 1068's following a $r\propto L^{0.5}$ scaling. These thirty-meter-telescope class observations of NGC 4151 and NGC 1068 highlight the need to revise MIR radiative transfer models of AGN to account for jet-related heating.

astro-ph.GA↗

arXiv2025

Wide Separation Planets In Time (WISPIT): Discovery of a Gap H$\alpha$ Protoplanet WISPIT 2b with MagAO-X

Excellent (<25 mas) H$_{\alpha}$ images of the star TYC 5709-354-1 led to the discovery of a rare H$_{\alpha}$ protoplanet. This star was discovered by the WISPIT survey to have a large multi-ring transitional disk, and is hereafter WISPIT 2. Our H$_{\alpha}$ images of 2025, April 13 and April 16 discovered an accreting (H$_{\alpha}$ in emission) protoplanet: WISPIT 2b (r=309.43$\pm$1.56 mas; (~54 au deprojected), PA=242.21$\pm$0.41 degrees) likely clearing a dust-free gap between the two brightest dust rings in the transitional disk. Our SNR=12.5 detection gave an H$_{\alpha}$ ASDI contrast of (6.5$\pm$0.5)x10$^{-4}$ and a H$_{\alpha}$ line flux of (1.29$\pm$0.28)x10$^{-15}$ erg/s/cm$^2$. We also present L' photometry from LBT/LMIRcam of the planet (L'=15.30$\pm$0.05 mag) which, when coupled with an age of 5.1$^{+2.4}_{-1.3}$ Myr, yields a planet mass estimate of 5.3$\pm$1.0 Mjup from the DUSTY evolutionary models. WISPIT 2b is accreting at 2.25$^{-0.17}_{+3.75}$x10$^{-12}$ Msun/yr. WISPIT 2b is very similar to the other H$_{\alpha}$ protoplanets in terms of mass, age, flux, and accretion rate. The inclination of the system (${\it i}$=44 degrees) is also, surprisingly, very similar to the other known H$\alpha$ protoplanet systems which all cluster from 37$\leq{\it i}\leq$52 degrees. We argue this clustering has only a ~1.0% (2.6 sigma) probability of occurring randomly, and so we speculate that magnetospherical accretion might have a preferred inclination range (~37-52 degrees) for the direct (cloud free, low extinction) line of sight to the H-alpha line formation/shock region. We also find at 110mas (~15au deprojected) a close companion candidate (CC1) which may be consistent with an inner dusty 9$\pm$4 Mjup planet.

astro-ph.EP↗

arXiv2025

Direct imaging of AGN outflows and their origin with the 23 m Large Binocular Telescope

Active galactic nuclei (AGNs) are a key component of galaxy evolution due to feedback on the host from its supermassive black hole. The morphology of warm, in- and outflowing dusty material can reveal the nature of the onset of feedback, AGN feeding, and the unified model of AGN. Here we use the Large Binocular Telescope Interferometer (LBTI) to image the dense, obscuring disk and extended dusty outflow region of NGC 1068. In Fizeau imaging mode the LBTI synthesizes the equivalent resolution of a 22.8 m telescope. The 8.7 $\mu$m Fizeau images of NGC 1068 {have an effective resolution of $47\times90$ mas ($3.3\times6.2$ pc)} in a 5" field of view after performing PSF deconvolution techniques described here. This is the only extragalactic source to be Fizeau imaged using the LBTI, and the images bridge the scales measured with the Very Large Telescope Interferometer (VLTI; 0.5-5 pc) and those of single telescopes such as JWST and Keck ($>15$ pc). The images detect and spatially resolve the low surface brightness mid-infrared (MIR) features in the AGN disk/wind region that are over-resolved by the VLTI. The images show strong correlation between MIR dust emission and near-infrared (NIR) emission of highly excited atomic lines observed by SINFONI. Such LBTI imaging is a precursor to infrared imaging using the upcoming generation of extremely large telescopes, with angular resolutions up to 6x better than JWST, the largest space telescope in orbit.

astro-ph.GA↗

arXiv2023

The MAPS Adaptive Secondary Mirror: First Light, Laboratory Work, and Achievements

The MMT Adaptive Optics exoPlanet Characterization System (MAPS) is a comprehensive update to the first generation MMT adaptive optics system (MMTAO), designed to produce a facility class suite of instruments whose purpose is to image nearby exoplanets. The system's adaptive secondary mirror (ASM), although comprised in part of legacy components from the MMTAO ASM, represents a major leap forward in engineering, structure and function. The subject of this paper is the design, operation, achievements and technical issues of the MAPS adaptive secondary mirror. We discuss laboratory preparation for on-sky engineering runs, the results of those runs and the issues we discovered, what we learned about those issues in a follow-up period of laboratory work, and the steps we are taking to mitigate them.

astro-ph.IM↗

arXiv2022

Flash-X, a multiphysics simulation software instrument

Flash-X is a highly composable multiphysics software system that can be used to simulate physical phenomena in several scientific domains. It derives some of its solvers from FLASH, which was first released in 2000. Flash-X has a new framework that relies on abstractions and asynchronous communications for performance portability across a range of increasingly heterogeneous hardware platforms. Flash-X is meant primarily for solving Eulerian formulations of applications with compressible and/or incompressible reactive flows. It also has a built-in, versatile Lagrangian framework that can be used in many different ways, including implementing tracers, particle-in-cell simulations, and immersed boundary methods.

physics.comp-ph↗

arXiv2020

Design and development of a high-speed Visible Pyramid Wavefront Sensor for the MMT AO system

MAPS, MMT Adaptive optics exoPlanet characterization System, is the upgrade of legacy 6.5m MMT adaptive optics system. It is an NSF MSIP-funded project that includes (i) refurbishing of the MMT Adaptive Secondary Mirror (ASM), (ii) new high sensitive and high spatial order visible and near-infrared pyramid wavefront sensors, and (iii) the upgrade of Arizona Infrared Imager and Echelle Spectrograph (ARIES) and MMT high Precision Imaging Polarimeter (MMTPol) science cameras. This paper will present the design and development of the visible pyramid wavefront sensor. This system consists of an acquisition camera, a fast-steering tip-tilt modulation mirror, a double pyramid, a pupil imaging triplet lens, and a low noise and high-speed frame rate based CCID75 camera. We will report on hardware and software and present the laboratory characterization results of the individual subsystems, and outline the on-sky commissioning plan.

astro-ph.IM↗

arXiv2020

Analysis of Magnetic Vortex Dissipation in Sn-Segregated Boundaries in Nb$_3$Sn Superconducting RF Cavities

We study mechanisms of vortex nucleation in Nb$_3$Sn Superconducting RF (SRF) cavities using a combination of experimental, theoretical, and computational methods. Scanning transmission electron microscopy (STEM) image and energy dispersive spectroscopy (EDS) of some Nb$_3$Sn cavities show Sn segregation at grain boundaries in Nb$_3$Sn with Sn concentration as high as $\sim$35 at.\% and widths $\sim$3 nm in chemical composition. Using ab initio calculations, we estimate the effect excess tin has on the local superconducting properties of the material. We model Sn segregation as a lowering of the local critical temperature. We then use time-dependent Ginzburg-Landau theory to understand the role of segregation on magnetic vortex nucleation. Our simulations indicate that the grain boundaries act as both nucleation sites for vortex penetration and pinning sites for vortices after nucleation. Depending on the magnitude of the applied field, vortices may remain pinned in the grain boundary or penetrate the grain itself. We estimate the superconducting losses due to vortices filling grain boundaries and compare with observed performance degradation with higher magnetic fields. We estimate that the quality factor may decrease by an order of magnitude ($10^{10}$ to $10^9$) at typical operating fields if 0.03\% of the grain boundaries actively nucleate vortices. We additionally estimate the volume that would need to be filled with vortices to match experimental observations of cavity heating.

cond-mat.supr-con↗

arXiv2019

$\textit{Ab Initio}$ Study of Antisite Defects in Nb$_3$Sn: Phase Diagram and Impact on Superconductivity

Antisite defects play a critical role in Nb$_3$Sn superconducting radio frequency (SRF) cavity physics. Such defects are the primary form of disorder in Nb$_3$Sn, and are responsible for stoichiometry variations, including experimentally observed tin-depleted regions within grains and tin-rich regions around grain boundaries. But why they cluster to form regions of different stoichiometries and how they affect the SRF properties of Nb$_3$Sn cavities are not fully understood. Using $\textit{ab initio}$ techniques, we calculate the A15 region of the Nb-Sn phase diagram, discuss a possible modification to the phase diagram near grain boundaries, and calculate $T_c$ as a function of stoichiometry, including experimentally inaccessible tin-rich stoichiometry. We find that the impact of antisite defects on the density of states near the Fermi-level of Nb$_3$Sn plays a key role in determining many of their properties. These results improve our understanding of the obstacles facing Nb$_3$Sn SRF systems, and how modified growth processes might overcome them.

cond-mat.supr-con↗

arXiv2019

Role of surface defects and material inhomogeneities for vortex nucleation in superconductors within time-dependent Ginzburg-Landau theory in 2 and 3 dimensions

We use Time-Dependent Ginzburg-Landau theory to study the nucleation of vortices in type II superconductors in the presence of both geometric and material inhomogeneities. The superconducting Meissner state is meta-stable up to a critical magnetic field, known as the superheating field. For a uniform surface and homogenous material, the superheating transition is driven by a non-local critical mode in which an array of vortices simultaneously penetrate the surface. In contrast, we show that even a small amount of disorder localizes the critical mode and can have a significant reduction in the effective superheating field for a particular sample. Vortices can be nucleated by either surface roughness or local variations in material parameters, such as Tc. Our approach uses a finite element method to simulate a cylindrical geometry in 2 dimensions and a film geometry in 2 and 3 dimensions. We combine saddle node bifurcation analysis along with a novel fitting procedure to evaluate the superheating field and identify the unstable mode. We demonstrate agreement with previous results for homogenous geometries and surface roughness and extend the analysis to include variations in material properties. Finally, we show that in three dimensions, suface divots not aligned with the applied field can increase the super heating field. We discuss implications for fabrication and performance of superconducting resonant frequency cavities in particle accelerators.

physics.comp-ph↗