arXiv subjects

Jared L. May

Publications and source records attributed to Jared L. May.

7 recordsLinked to original sources

arXiv2026

picoMUX: microcontroller based time-domain multiplexing readout for kilopixel TES arrays

Advances in cryogenic SQUID-based time-domain multiplexing (TDM) have outpaced their warm readout electronics. Next generation CMB telescopes are baselining kilopixel TES arrays with few viable electronic options. We present picoMUX, a new TDM readout electronics architecture that replaces the FPGA typically used in such systems with a complement of modern microcontrollers. Designed around the current generation NIST multiplexer, it fully exploits its differential nature and two-level switching. The system achieves the desired timing metrics (sub {\mu}s row dwell time) while reducing cost, complexity, and power consumption over a comparable FPGA solution. Preliminary noise measurements are consistent with expectations and show no evidence that the novel architecture introduces excess noise. picoMUX demonstrates how recent advances in microcontrollers enable simpler, low-power, low-cost TDM readouts for kilopixel TES arrays.

astro-ph.IM↗

arXiv2026

Sub-Kelvin Cryogenics for a Super-Pressure Balloon-Borne CMB Polarimeter: Taurus

Taurus is a balloon-borne cosmic microwave background (CMB) experiment designed to operate more than 10,000 transition-edge sensor bolometers at a base temperature near 100 mK during a multi-week stratospheric balloon flight. This platform provides near-space observing conditions while imposing stringent constraints on mass, power, and system robustness, driving the need for a lightweight and highly reliable cryogenic system. To meet these requirements, Taurus employs a multi-stage cryogenic architecture. A 660 L liquid helium tank provides a stable 4 K reservoir, with vapor-cooled shields establishing intermediate stages at approximately 40 K and 80 K. A superfluid helium tank provides an approximately 1.5 K takeoff point for the sub-Kelvin cooling systems. Each of the instrument's three receivers is supported by an independent sub-Kelvin cooling chain that includes closed-cycle 3He sorption refrigerators that cool to 300 mK. These provide the thermal intercept and takeoff for a Chase Research Cryogenics miniature dilution refrigerator that cools the detectors to approximately 100 mK. Here we discuss the requirements and challenges of the Taurus sub-Kelvin cryogenic system and present results of early performance tests.

astro-ph.IM↗

arXiv2025

$\tau$HK: a modular housekeeping system for cryostats and balloon payloads

$\tau$HK is a versatile experiment housekeeping (HK) system designed to perform cryogenic temperature readout and heater control on the upcoming Taurus balloon experiment. $\tau$HK, more broadly, is also suitable for ambient-temperature applications and general-purpose experiment input and output. It is built around an IEEE Eurocard subrack capable of housing up to 16 interchangeable daughter cards, allowing a fully populated system to support as many as 256 independent channels while drawing under 7.5\,W. This modular architecture allows experiments to expand on the existing daughter cards with ones tailored to their specific needs. There are currently three flavors of daughter cards: Resistive Temperature Device (RTD) readout, general purpose thermometer bias and readout, and load driver. The RTD board consists of a low noise lock-in amplifier that is limited only by device sensitivity over all temperature ranges. The general-purpose bias and readout board with chopping capability is primarily designed for thermometer diodes, but flexible enough to accommodate room temperature thermistors, Wheatstone bridges, optical encoders, and other devices. Finally, the load driver card can output an analog voltage for precise cryogenic heaters or it can be used to pulse width modulate high power loads. $\tau$HK is a power efficient solution for experimental housekeeping needs that is suited for the the harsh environment of stratospheric ballooning.

physics.ins-det↗

arXiv2024

Thermal architecture for a cryogenic super-pressure balloon payload: design and development of the Taurus flight cryostat

We describe the cryogenic system being developed for Taurus: a super-pressure balloon-borne microwave polarimeter scheduled to fly in 2027. The Taurus cryogenic system consists of a 660L liquid helium cryostat which achieves a base temperature of <100mK with the help of a capillary-fed superfluid tank and a closed cycle dilution refrigerator. The main tank is supported with fiberglass flexures and is encased in two layers of vapor-cooled shields which allow Taurus to make full use of the extended flight time offered by the super-pressure balloon platform. The Taurus cryostat is projected to hold for over 50 days while weighing under 1000lbs. We present the design, testing, and thermal analysis of the Taurus cryogenic systems.

physics.ins-det↗

arXiv2024

Instrument Overview of Taurus: A Balloon-borne CMB and Dust Polarization Experiment

Taurus is a balloon-borne cosmic microwave background (CMB) experiment optimized to map the E-mode polarization and Galactic foregrounds at the largest angular scales ($\ell$ $\lt$ 30) and improve measurements of the optical depth to reionization ($\tau$). This will pave the way for improved measurements of the sum of neutrino masses in combination with high-resolution CMB data while also testing the $\Lambda CDM$ model on large angular scales and providing high-frequency maps of polarized dust foregrounds to the CMB community. These measurements take advantage of the low-loading environment found in the stratosphere and are enabled by NASA's super-pressure balloon platform, which provides access to 70% of the sky with a launch from Wanaka, New Zealand. Here we describe a general overview of Taurus, with an emphasis on the instrument design. Taurus will employ more than 10,000 100 mK transition edge sensor bolometers distributed across two low-frequency (150, 220 GHz) and one high-frequency (280, 350 GHz) dichroic receivers. The liquid helium cryostat housing the detectors and optics is supported by a lightweight gondola. The payload is designed to meet the challenges in mass, power, and thermal control posed by the super-pressure platform. The instrument and scan strategy are optimized for rigorous control of instrumental systematics, enabling high-fidelity linear polarization measurements on the largest angular scales.

astro-ph.IM↗

arXiv2024

Modeling optical systematics for the Taurus CMB experiment

We simulate a variety of optical systematics for Taurus, a balloon-borne cosmic microwave background (CMB) polarisation experiment, to assess their impact on large-scale E-mode polarisation measurements and constraints of the optical depth to reionisation {\tau}. We model a one-month flight of Taurus from Wanaka, New Zealand aboard a super-pressure balloon (SPB). We simulate night-time scans of both the CMB and dust foregrounds in the 150GHz band, one of Taurus's four observing bands. We consider a variety of possible systematics that may affect Taurus's observations, including non-gaussian beams, pointing reconstruction error, and half-wave plate (HWP) non-idealities. For each of these, we evaluate the residual power in the difference between maps simulated with and without the systematic, and compare this to the expected signal level corresponding to Taurus's science goals. Our results indicate that most of the HWP-related systematics can be mitigated to be smaller than sample variance by calibrating with Planck's TT spectrum and using an achromatic HWP model, with a preference for five layers of sapphire to ensure good systematic control. However, additional beam characterization will be required to mitigate far-sidelobe pickup from dust on larger scales.

astro-ph.CO↗

arXiv2023

Sidelobe Modeling and Mitigation for a Three Mirror Anastigmat Cosmic Microwave Background Telescope

Telescopes measuring cosmic microwave background (CMB) polarization on large angular scales require exquisite control of systematic errors to ensure the fidelity of the cosmological results. In particular, far-sidelobe contamination from wide angle scattering is a potentially prominent source of systematic error for large aperture microwave telescopes. Here we describe and demonstrate a ray-tracing-based modeling technique to predict far sidelobes for a Three Mirror Anistigmat (TMA) telescope designed to observe the CMB from the South Pole. Those sidelobes are produced by light scattered in the receiver optics subsequently interacting with the walls of the surrounding telescope enclosure. After comparing simulated sidelobe maps and angular power spectra for different enclosure wall treatments, we propose a highly scattering surface that would provide more than an order of magnitude reduction in the degree-scale far-sidelobe contrast compared to a typical reflective surface. We conclude by discussing the fabrication of a prototype scattering wall panel and presenting measurements of its angular scattering profile.

astro-ph.IM↗