arXiv subjects

Jared Males

Publications and source records attributed to Jared Males.

At least 19 recordsLinked to original sources

arXiv2026

Upgrading LBTI/NOMIC with a quadruple annular groove phase mask and GeoSnap detector for imaging nearby, habitable-zone exoplanets

The Large Binocular Telescope Interferometer (LBTI)'s Nulling-Optimized Mid-Infrared Camera (NOMIC) is among the most capable thermal-infrared imaging systems available for high-contrast, high-angular-resolution astronomical observations. Here we describe two in-progress upgrades to LBTI/NOMIC: (1) the design, fabrication, and installation of a quadruple annular groove phase mask (Q-AGPM) coronagraph, and (2) the installation of a 13 micron-cutoff Teledyne GeoSnap array. The Q-AGPM is the first coronagraph to be installed within NOMIC and one of the first optimized for N-band (~11 micron) observations. It places four annular groove phase masks on a single diamond substrate so that, in the LBTI dual-aperture imaging mode, each of the two telescope beams can be chopped between a pair of masks without loss of observing efficiency. The GeoSnap array will replace NOMIC's original AQUARIUS array, delivering higher quantum efficiency, larger well depth, faster and more linear readout, and freedom from the excess low-frequency noise that requires aggressive chopping. Together these upgrades substantially improve the achievable contrast and sensitivity at small angular separations. We also present a high-contrast Fizeau imaging sequence obtained with LBTI's new FFTCam fringe tracker, which confirms the interferometric gain over a single aperture through injection/recovery tests: relative to an equal-time single aperture exposure, the S/N = 3 contrast is a factor of ~2-4 deeper across 0.2-1 arcsec, spanning the contrast- and background-limited regimes. Finally, we describe the role of the upgraded LBTI/NOMIC instrument within the Breakthrough Watch program at the University of Arizona, which aims to perform the deepest observations yet of the habitable zones of the nearest single Sun-like stars.

astro-ph.IM↗

arXiv2026

Phase-Induced Amplitude Apodization Complex Mask Coronagraph (PIAACMC) on-sky demonstration with MagAO-X

Advancing the technological development of small inner working angle (IWA) coronagraphs is essential to enabling high-contrast imaging of temperate exoplanets with future extremely large telescopes. The PIAACMC has been shown to closely approach the theoretical limit for coronagraphic throughput but its performance has not been fully characterised on-sky. This study serves as the first on-sky characterisation of contrast and IWA performance of the PIAACMC and its first technological demonstration at sub-micron wavelengths. We designed and manufactured phase-shifting focal plane masks optimised for two cases, a narrowband 875 filter (875nm, 3% band) and a broadband z' filter (908nm, 14% band). We tested the coronagraphs both with an internal source and on-sky using MagAOX, the extreme adaptive optics instrument for the Magellan Clay 6.5 m telescope at Las Campanas Observatory. We show good recovery of the off-axis light's PSF shape within 92% and 97% depending on the separation when aligning the inverse set of PIAA lenses. We demonstrate sub-lambda/D IWAs of about 0.74 lambda/D in 875 and 0.76 lambda/D in z'. We reach average raw contrasts within 1 and 5 lambda/D with the internal source of about 1.6e-3 in 875 and 1.3e-3 in z'. These are mainly limited by the focal plane mask manufacturing errors, jitter, and residual quasi-static speckles in MagAO-X. We also show on-sky average raw contrasts within 1 and 5 lambda/D of about 1.4e-2 in 875 and 7.8e-3 in z'. These are likely limited by wavefront control, low-order aberrations, and poor observing conditions. Future work will improve the design and manufacturing processes of the focal plane masks to improve robustness and reach deeper contrast, as well as integrate focal plane wavefront control for non-common path aberrations correction.

astro-ph.IM↗

arXiv2025

The Space Coronagraph Optical Bench (SCoOB): 6. demonstration of Lyot low order wavefront control combined with high order wavefront control using a vortex coronagraph

To reach and maintain high contrast levels, coronagraph instruments will require a combination of low-order and high-order wavefront control techniques to correct for dynamic wavefront error. Efficient low-order wavefront sensing and control (LOWFSC) schemes use the starlight rejected by the coronagraph such that LOWFSC can operate with a relatively bright signal to correct rapid disturbances. Meanwhile, a family of high-order wavefront sensing and control (HOWFSC) techniques utilizing the science camera have been developed to create regions of high contrast known as dark holes. These two control loops must operate simultaneously for dark holes to be maintained over long observation periods. Using a 952 actuator MEMS deformable mirror and a vector vortex coronagraph (VVC) on the Space Coronagraph Optical Bench (SCoOB), we demonstrate a Lyot-based LOWFSC loop operating in combination with a HOWFSC loop. For these experiments, implicit electric field conjugation (iEFC) is the chosen HOWFSC technique, and we demonstrate how this empirical method can be calibrated and deployed while the LOWFSC loop corrects for dynamic wavefront error. We show this combination of LOWFSC and iEFC maintained 1E-8 contrast levels in air.

physics.optics↗

arXiv2024

Tuning the MAPS Adaptive Secondary Mirror: Actuator Control, PID Tuning, Power Spectra and Failure Diagnosis

The MMT Adaptive optics exoPlanet characterization System (MAPS) is currently in its engineering phase, operating on-sky at the MMT Telescope on Mt. Hopkins in southern Arizona. The MAPS Adaptive Secondary Mirror's actuators are controlled by a closed loop modified PID control law and an open loop feed-forward law, which in combination allows for faster actuator response time. An essential element of achieving the secondary's performance goals involves the process of PID gain tuning. To start, we briefly discuss the design of the MAPS ASM and its actuators. We then describe the actuator positional control system and control law. Next, we discuss a few of the issues that make ASM tuning difficult. We then outline our initial attempts at tuning the actuator controllers and discuss the use of actuator positional power spectra for both tuning and determining the health and failure states of individual actuators. We conclude by presenting the results of our latest round of tuning configuration trials, which have been successful at decreasing mirror latency, increasing operational mirror modes and improving image PSF.

astro-ph.IM↗

arXiv2024

Real-time control and data standardization on various telescopes and benches

Real-time control (RTC) is pivotal for any Adaptive Optics (AO) system, including high-contrast imaging of exoplanets and circumstellar environments. It is the brain of the AO system, and what wavefront sensing and control (WFS\&C) techniques need to work with to achieve unprecedented image quality and contrast, ultimately advancing our understanding of exoplanetary systems in the context of high contrast imaging (HCI). Developing WFS\&C algorithms first happens in simulation or a lab before deployment on-sky. The transition to on-sky testing is often challenging due to the different RTCs used. Sharing common RTC standards across labs and telescope instruments would considerably simplify this process. A data architecture based on the interprocess communication method known as shared memory is ideally suited for this purpose. The CACAO package, an example of RTC based on shared memory, was initially developed for the Subaru-SCExAO instrument and now deployed on several benches and instruments. This proceeding discusses the challenges, requirements, implementation strategies, and performance evaluations associated with integrating a shared memory-based RTC. The Santa Cruz Extreme AO Laboratory (SEAL) bench is a platform for WFS\&C development for large ground-based segmented telescopes. Currently, SEAL offers the user a non-real-time version of CACAO, a shared-memory based RTC package initially developed for the Subaru-SCExAO instrument, and now deployed on several benches and instruments. We show here the example of the SEAL RTC upgrade as a precursor to both RTC upgrade at the 3-m Shane telescopes at Lick Observatory (Shane-AO) and a future development platform for the Keck II AO. This paper is aimed at specialists in AO, astronomers, and WFS\&C scientists seeking a deeper introduction to the world of RTCs.

astro-ph.IM↗

arXiv2024

US Adaptive Optics Roadmap to Achieve Astro2020

In the recent Astro2020 Decadal Report, ''Pathways to Discovery in Astronomy and Astrophysics for the 2020s'' Adaptive Optics (AO) was identified as a crucial technology for a variety of reasons. These included an emphasis on high-contrast imaging and AO systems as being part of future technology development especially with application to the two US ELT projects. Instrument upgrades were also identified for existing 4m to 10m class telescopes which would incorporate upgrades to existing AO systems. As noted in the Report: (1) ''the central role of AO instrumentation and the importance of further development are rapidly growing, with novel concepts pushing toward wider area'', (2) ''Visible AO has high potential scientific return by opening up an entire wavelength regime to high angular resolution studies. The goal is to exploit the smaller diffraction limit of telescopes in the optical, yet both the coherence length and time decrease at shorter wavelengths requiring wavefront sensing at high spatial and temporal frequencies that are currently technologically challenging. This is an important developing area for the 2020s - 2030s.'', and (3) ''Such investments in AO systems development is a key risk mitigation strategy for ELTs, whose full resolution and sensitivity potential can only be realized with AO, and which is recognized as the most important technical risk for both GMT and TMT''. A workshop was held in May, 2023 to develop a Community Response document (this document) to provide feedback and suggested priorities to various funding agencies, such as NSF, NASA, and DoE, as to the AO Research and Development priorities to meet the technical and science objectives outlined in Astro2020 for ground-based AO, both stand-alone and in support of space missions.

astro-ph.IM↗

arXiv2024

Making the unmodulated Pyramid wavefront sensor smart. Closed-loop demonstration of neural network wavefront reconstruction with MagAO-X

Almost all current and future high-contrast imaging instruments will use a Pyramid wavefront sensor (PWFS) as a primary or secondary wavefront sensor. The main issue with the PWFS is its nonlinear response to large phase aberrations, especially under strong atmospheric turbulence. Most instruments try to increase its linearity range by using dynamic modulation, but this leads to decreased sensitivity, most prominently for low-order modes, and makes it blind to petal-piston modes. In the push toward high-contrast imaging of fainter stars and deeper contrasts, there is a strong interest in using the PWFS in its unmodulated form. Here, we present closed-loop lab results of a nonlinear reconstructor for the unmodulated PWFS of the Magellan Adaptive Optics eXtreme (MagAO-X) system based on convolutional neural networks (CNNs). We show that our nonlinear reconstructor has a dynamic range of >600 nm root-mean-square (RMS), significantly outperforming the linear reconstructor that only has a 50 nm RMS dynamic range. The reconstructor behaves well in closed loop and can obtain >80% Strehl at 875 nm under a large variety of conditions and reaches higher Strehl ratios than the linear reconstructor under all simulated conditions. The CNN reconstructor also achieves the theoretical sensitivity limit of a PWFS, showing that it does not lose its sensitivity in exchange for dynamic range. The current CNN's computational time is 690 microseconds, which enables loop speeds of >1 kHz. On-sky tests are foreseen soon and will be important for pushing future high-contrast imaging instruments toward their limits.

astro-ph.IM↗

arXiv2023

The MAPS Adaptive Secondary Mirror: First Light, Laboratory Work, and Achievements

The MMT Adaptive Optics exoPlanet Characterization System (MAPS) is a comprehensive update to the first generation MMT adaptive optics system (MMTAO), designed to produce a facility class suite of instruments whose purpose is to image nearby exoplanets. The system's adaptive secondary mirror (ASM), although comprised in part of legacy components from the MMTAO ASM, represents a major leap forward in engineering, structure and function. The subject of this paper is the design, operation, achievements and technical issues of the MAPS adaptive secondary mirror. We discuss laboratory preparation for on-sky engineering runs, the results of those runs and the issues we discovered, what we learned about those issues in a follow-up period of laboratory work, and the steps we are taking to mitigate them.

astro-ph.IM↗

arXiv2022

High Contrast Imaging at the Photon Noise Limit with WFS-based PSF Calibration

Speckle Noise is the dominant source of error in high contrast imaging with adaptive optics system. We discuss the potential for wavefront sensing telemetry to calibrate speckle noise with sufficient precision and accuracy so that it can be removed in post-processing of science images acquired by high contrast imaging instruments. In such a self-calibrating system, exoplanet detection would be limited by photon noise and be significantly more robust and efficient than in current systems. We show initial laboratory and on-sky tests, demonstrating over short timescale that residual speckle noise is indeed calibrated to an accuracy exceeding readout and photon noise in the high contrast region. We discuss immplications for the design of space and ground high-contrast imaging systems.

astro-ph.IM↗

arXiv2022

High contrast imaging with Fizeau interferometry: The case of Altair

The Large Binocular Telescope (LBT) has two 8.4-m primary mirrors that produce beams that can be combined coherently in a "Fizeau" interferometric mode. In principle, the Fizeau PSF enables the probing of structure at a resolution up to three times better than that of the adaptive-optics-corrected PSF of a single 8.4-m telescope. In this work, we examined the nearby star Altair (5.13 pc, type A7V, $\sim$100s Myr to $\approx$1.4 Gyr) in the Fizeau mode with the LBT at Br-$\alpha$ (4.05 $\mu$m) and carried out angular differential imaging to search for companions. This work presents the first filled-aperture LBT Fizeau science dataset to benefit from a correcting mirror which provides active phase control. In the analysis of the $\lambda/D$ angular regime, the sensitivity of the dataset is down to $\approx$0.5 $M_{\odot}$ at 1" for a 1.0 Gyr system. This sensitivity remains limited by the small amount of integration time, which is in turn limited by the instability of the Fizeau PSF. However, in the Fizeau fringe regime we attain sensitivities of $\Delta m \approx 5$ at 0.2" and put constraints to companions of 1.3 $M_{\odot}$ down to an inner angle of $\approx$0.15", closer than any previously published direct imaging of Altair. This analysis is a pathfinder for future datasets of this type, and represents some of the first steps to unlocking the potential of the first ELT. Fizeau observations will be able to reach dimmer targets with upgrades to the instrument, in particular the phase detector.

astro-ph.IM↗

arXiv2021

High contrast imaging at the photon noise limit with self-calibrating WFS/C systems

High contrast imaging (HCI) systems rely on active wavefront control (WFC) to deliver deep raw contrast in the focal plane, and on calibration techniques to further enhance contrast by identifying planet light within the residual speckle halo. Both functions can be combined in an HCI system and we discuss a path toward designing HCI systems capable of calibrating residual starlight at the fundamental contrast limit imposed by photon noise. We highlight the value of deploying multiple high-efficiency wavefront sensors (WFSs) covering a wide spectral range and spanning multiple optical locations. We show how their combined information can be leveraged to simultaneously improve WFS sensitivity and residual starlight calibration, ideally making it impossible for an image plane speckle to hide from WFS telemetry. We demonstrate residual starlight calibration in the laboratory and on-sky, using both a coronagraphic setup, and a nulling spectro-interferometer. In both case, we show that bright starlight can calibrate residual starlight.

astro-ph.IM↗

arXiv2021

Imaging low-mass planets within the habitable zones of nearby stars with ground-based mid-infrared imaging

Giant exoplanets on 10-100 au orbits have been directly imaged around young stars. The peak of the thermal emission from these warm young planets is in the near-infrared (~1-5 microns), whereas mature, temperate exoplanets (i.e., those within their stars' habitable zones) radiate primarily in the mid-infrared (mid-IR: ~10 microns). If the background noise in the mid-IR can be mitigated, then exoplanets with low masses--including rocky exoplanets--can potentially be imaged in very deep exposures. Here, we review the recent results of the Breakthrough Watch/New Earths in the Alpha Centauri Region (NEAR) program on the Very Large Telescope (VLT) in Chile. NEAR pioneered a ground-based mid-IR observing approach designed to push the capabilities for exoplanet imaging with a specific focus on the closest stellar system, Alpha Centauri. NEAR combined several new optical technologies--including a mid-IR optimized coronagraph, adaptive optics system, and rapid chopping strategy to mitigate noise from the central star and thermal background within the habitable zone. We focus on the lessons of the VLT/NEAR campaign to improve future instrumentation--specifically on strategies to improve noise mitigation through chopping. We also present the design and commissioning of the Large Binocular Telescope's Exploratory Survey for Super-Earths Orbiting Nearby Stars (LESSONS), an experiment in the Northern hemisphere that is building on what was learned from NEAR to further push the sensitivity of mid-IR imaging. Finally, we briefly discuss some of the possibilities that mid-IR imaging will enable for exoplanet science.

astro-ph.IM↗

arXiv2020

Design and development of a high-speed Visible Pyramid Wavefront Sensor for the MMT AO system

MAPS, MMT Adaptive optics exoPlanet characterization System, is the upgrade of legacy 6.5m MMT adaptive optics system. It is an NSF MSIP-funded project that includes (i) refurbishing of the MMT Adaptive Secondary Mirror (ASM), (ii) new high sensitive and high spatial order visible and near-infrared pyramid wavefront sensors, and (iii) the upgrade of Arizona Infrared Imager and Echelle Spectrograph (ARIES) and MMT high Precision Imaging Polarimeter (MMTPol) science cameras. This paper will present the design and development of the visible pyramid wavefront sensor. This system consists of an acquisition camera, a fast-steering tip-tilt modulation mirror, a double pyramid, a pupil imaging triplet lens, and a low noise and high-speed frame rate based CCID75 camera. We will report on hardware and software and present the laboratory characterization results of the individual subsystems, and outline the on-sky commissioning plan.

astro-ph.IM↗

arXiv2020

Laboratory Demonstration of Spatial Linear Dark Field Control For Imaging Extrasolar Planets in Reflected Light

Imaging planets in reflected light, a key focus of future NASA missions and ELTs, requires advanced wavefront control to maintain a deep, temporally correlated null of stellar halo -- i.e. a dark hole -- at just several diffraction beam widths. Using the Ames Coronagraph Experiment testbed, we present the first laboratory tests of Spatial Linear Dark Field Control (LDFC) approaching raw contrasts ($\sim$ 5$\times$10$^{-7}$) and separations (1.5--5.2 $\lambda$/D) needed to image jovian planets around Sun-like stars with space-borne coronagraphs like WFIRST-CGI and image exo-Earths around low-mass stars with future ground-based 30m class telescopes. In four separate experiments and for a range of different perturbations, LDFC largely restores (to within a factor of 1.2--1.7) and maintains a dark hole whose contrast is degraded by phase errors by an order of magnitude. Our implementation of classical speckle nulling requires a factor of 2--5 more iterations and 20--50 DM commands to reach contrasts obtained by spatial LDFC. Our results provide a promising path forward to maintaining dark holes without relying on DM probing and in the low-flux regime, which may improve the duty cycle of high-contrast imaging instruments, increase the temporal correlation of speckles, and thus enhance our ability to image true solar system analogues in the next two decades.

astro-ph.IM↗

arXiv2019

New Spatially Resolved Imaging of the SR 21 Transition Disk and Constraints on the Small-Grain Disk Geometry

We present new 0.6 - 4 $μ$m imaging of the SR 21 transition disk from Keck/NIRC2 and Magellan/MagAO. The protoplanetary disk around SR 21 has a large (~ 30 - 40 AU) clearing first inferred from its spectral energy distribution and later detected in sub-millimeter imaging. Both the gas and small dust grains are known to have a different morphology, with an inner truncation in CO at ~7 AU, and micron-sized dust detected within the millimeter clearing. Previous near-infrared imaging could not distinguish between an inner dust disk with a truncation at ~7 AU or one that extended to the sublimation radius. The imaging data presented here require an inner dust disk radius of a few AU, and complex structure such as a warp or spiral. We present a parametric warped disk model that can reproduce the observations. Reconciling the images with the spectral energy distribution gathered from the literature suggests grain growth to ~2 - 5 $μ$m within the sub-millimeter clearing. The complex disk structure and possible grain growth can be connected to dynamical shaping by a giant-planet mass companion, a scenario supported by previous observational and theoretical studies.

astro-ph.SR↗

arXiv2019

Optical and Near-IR Microwave Kinetic Inductance Detectors (MKIDs) in the 2020s

Optical and near-IR Microwave Kinetic Inductance Detectors, or MKIDs, are superconducting photon counting detectors capable of measuring the energy and arrival time of individual OIR photons without read noise or dark current. In this whitepaper we will discuss the current status of OIR MKIDs and MKID-based instruments.

astro-ph.IM↗

arXiv2019

Detecting Earth-like Biosignatures on Rocky Exoplanets around Nearby Stars with Ground-based Extremely Large Telescopes

As we begin to discover rocky planets in the habitable zone of nearby stars with missions like TESS and CHEOPS, we will need quick advancements on instrumentation and observational techniques that will enable us to answer key science questions, such as What are the atmospheric characteristics of habitable zone rocky planets? How common are Earth-like biosignatures in rocky planets?} How similar or dissimilar are those planets to Earth? Over the next decade we expect to have discovered several Earth-analog candidates, but we will not have the tools to study the atmospheres of all of them in detail. Ground-based ELTs can identify biosignatures in the spectra of these candidate exo-Earths and understand how the planets' atmospheres compare to the Earth at different epochs. Transit spectroscopy, high-resolution spectroscopy, and reflected-light direct imaging on ELTs can identify multiple biosignatures for habitable zone, rocky planets around M stars at optical to near-infrared wavelengths. Thermal infrared direct imaging can detect habitable zone, rocky planets around AFGK stars, identifying ozone and motivating reflected-light follow-up observations with NASA missions like HabEx/LUVOIR. Therefore, we recommend that the Astro2020 Decadal Survey Committee support: (1) the search for Earth-like biosignatures on rocky planets around nearby stars as a key science case; (2) the construction over the next decade of ground-based Extremely Large Telecopes (ELTs), which will provide the large aperture and spatial resolution necessary to start revealing the atmospheres of Earth-analogues around nearby stars; (3) the development of instrumentation that optimizes the detection of biosignatures; and (4) the generation of accurate line lists for potential biosignature gases, which are needed as model templates to detect those molecules.

astro-ph.EP↗

arXiv2019

Imaging Giant Protoplanets with the ELTs

We have now accumulated a wealth of observations of the planet-formation environment and of mature planetary systems. These data allow us to test and refine theories of gas-giant planet formation by placing constraints on the conditions and timescale of this process. Yet a number of fundamental questions remain unanswered about how protoplanets accumulate material, their photospheric properties and compositions, and how they interact with protoplanetary disks. While we have begun to detect protoplanet candidates during the last several years, we are presently only sensitive to the widest separation, highest mass / accretion rate cases. Current observing facilities lack the angular resolution and inner working angle to probe the few-AU orbital separations where giant planet formation is thought to be most efficient. They also lack the contrast to detect accretion rates that would form lower mass gas giants and ice giants. Instruments and telescopes coming online over the next decade will provide high contrast in the inner giant-planet-forming regions around young stars, allowing us to build a protoplanet census and to characterize planet formation in detail for the first time.

astro-ph.EP↗