arXiv subjects

Jarosław Kanak

Publications and source records attributed to Jarosław Kanak.

9 recordsLinked to original sources

arXiv2021

Angular harmonic Hall voltage and magnetoresistance measurements of Pt/FeCoB and Pt-Ti/FeCoB bilayers for spin Hall conductivity determination

Materials with significant spin-orbit coupling enable efficient spin-to-charge interconversion, which can be utilized in novel spin electronic devices. A number of elements, mainly heavy-metals (HM) have been identified to produce a sizable spin current ($j_\mathrm{s}$), while supplied with a charge current ($j$), detected mainly in the neighbouring ferromagnetic (FM) layer. Apart from the spin Hall angle $θ_\mathrm{SH}$ = $j_\mathrm{s}$/$j$, spin Hall conductivity ($σ_\mathrm{SH}$) is an important parameter, which takes also the resistivity of the material into account. In this work, we present a measurement protocol of the HM/FM bilayers, which enables for a precise $σ_\mathrm{SH}$ determination. Static transport measurements, including resistivity and magnetization measurements are accompanied by the angular harmonic Hall voltage analysis in a dedicated low-noise rotating probe station. Dynamic characterization includes effective magnetization and magnetization damping measurement, which enable HM/FM interface absorption calculation. We validate the measurement protocol in Pt and Pt-Ti underlayers in contact with FeCoB and present the $σ_\mathrm{SH}$ of up to 3.3$\times$10$^5$ S/m, which exceeds the values typically measured in other HM, such as W or Ta.

cond-mat.mes-hall↗

arXiv2021

Study of Spin-Orbit Interactions and Interlayer Ferromagnetic Coupling in Co/Pt/Co Trilayers in Wide Range of Heavy Metal Thickness

The spin-orbit torque, a torque induced by a charge current flowing through the heavy-metal conducting layer with strong spin-orbit interactions, provides an efficient way to control the magnetization direction in heavy-metal/ferromagnet nanostructures, required for applications in the emergent magnetic technologies like random access memories, high-frequency nano oscillators, or bio-inspired neuromorphic computations. We study the interface properties, magnetization dynamics, magnetostatic features and spin-orbit interactions within the multilayer system Ti(2)/Co(1)/Pt(0-4)/Co(1)/MgO(2)/Ti(2) (thicknesses in nanometers) patterned by optical lithography on micrometer-sized bars. In the investigated devices, Pt is used as a source of the spin current and as a non-magnetic spacer with variable thickness, which enables the magnitude of the interlayer ferromagnetic exchange coupling to be effectively tuned. We also find the Pt thickness-dependent changes in magnetic anisotropies, magnetoresistance, effective Hall angle and, eventually, spin-orbit torque fields at interfaces. The experimental findings are supported by the relevant interface structure-related simulations, micromagnetic, macrospin, as well as the spin drift-diffusion models. Finally, the contribution of the spin-orbital Edelstein-Rashba interfacial fields is also briefly discussed in the analysis.

cond-mat.mes-hall↗

arXiv2020

Current-induced magnetization switching of exchange-biased NiO heterostructures characterized by spin-orbit torque

In this work, we study magnetization switching induced by spin-orbit torque in W(Pt)/Co/NiO heterostructures with variable thickness of heavy-metal layers W and Pt, perpendicularly magnetized Co layer and an antiferromagnetic NiO layer. Using current-driven switching, magnetoresistance and anomalous Hall effect measurements, perpendicular and in-plane exchange bias field were determined. Several Hall-bar devices possessing in-plane exchange bias from both systems were selected and analyzed in relation to our analytical switching model of critical current density as a function of Pt and W thickness, resulting in estimation of effective spin Hall angle and perpendicular effective magnetic anisotropy. We demonstrate in both the Pt/Co/NiO and the W/Co/NiO systems the deterministic Co magnetization switching without external magnetic field which was replaced by in-plane exchange bias field. Moreover, we show that due to a higher effective spin Hall angle in W than in Pt-systems the relative difference between the resistance states in the magnetization current switching to difference between the resistance states in magnetic field switching determined by anomalous Hall effect ($ΔR/ΔR_{\text{AHE}}$) is about twice higher in W than Pt, while critical switching current density in W is one order lower than in Pt-devices. The current switching stability and training process is discussed in detail.

physics.app-ph↗

arXiv2020

Spin-orbit torque induced magnetisation dynamics and switching in CoFeB/Ta/CoFeB system with mixed magnetic anisotropy

Spin-orbit torque (SOT) induced magnetisation switching in CoFeB/Ta/CoFeB trilayer with two CoFeB layers exhibiting in-plane magnetic anisotropy (IPMA) and perpendicular magnetic anisotropy (PMA) is investigated. Interlayer exchange coupling (IEC), measured using ferromagnetic resonance technique is modified by varying thickness of Ta spacer. The evolution of the IEC leads to different orientation of the magnetic anisotropy axes of two CoFeB layers: for thicker Ta layer where magnetisation prefers antiferromagnetic ordering and for thinner Ta layer where ferromagnetic coupling exists. Magnetisation state of the CoFeB layer exhibiting PMA is controlled by the spin-polarized current originating from SOT in $μm$ sized Hall bars. The evolution of the critical SOT current density with Ta thickness is presented, showing an increase with decreasing $t_\mathrm{Ta}$, which coincides with the coercive field dependence. In a narrow range of $t_\mathrm{Ta}$ corresponding to the ferromagnetic IEC, the field-free SOT-induced switching is achieved.

physics.app-ph↗

arXiv2019

Structural, magnetostatic and magnetodynamic studies of Co/Mo-based uncompensated synthetic antiferromagnets

In this work, we comprehensively investigate and discuss the structural, magnetostatic, dynamic, and magnetoresistive properties of epitaxial Co/Mo superlattices. The magnetization of the Co sublayers is coupled antiferromagnetically with a strength that depends on the thickness of the nonmagnetic Mo spacer. The magnetization and magnetoresistance hysteresis loops clearly reflect interlayer exchange coupling and the occurrence of uniaxial magnetic anisotropy induced by the strained Co sublayers. Upon accounting for a deviation of the sublayer thicknesses from the nominal value, theoretical modeling, including both micromagnetic and macrospin approaches, precisely reproduces experimental magnetic hysteresis loops, magnetoresistance curves, and ferromagnetic resonance dispersion relations. The Mo spacer thickness as a function of the interlayer magnetic coupling is determined as a fitting parameter by modeling the experimental results.

cond-mat.mtrl-sci↗

arXiv2019

Spin Hall Magnetoresistance in Metallic Bilayers with In-plane Magnetized Ferromagnets

We revisit the theory and experiment on spin Hall magnetoresistance (SMR) in bilayers consisting of a heavy metal (H) coupled to in-plane magnetized ferromagnetic metal (F), and determine contributions to the magnetoresistance due to SMR and anisotropic magnetoresistance (AMR) in four different bilayer systems: W/$\text{Co}_{20}\text{Fe}_{60}\text{B}_{20}$, W/Co, $\text{Co}_{20}\text{Fe}_{60}\text{B}_{20}$/Pt, and Co/Pt. To do this, the AMR is explicitly included in the diffusion transport equations in the ferromagnet. The results allow precise determination of different contributions to the magnetoresistance, which can play an important role in optimizing prospective magnetic stray field sensors. They also may be useful in the determination of spin transport properties of metallic magnetic heterostructures in other experiments based on magnetoresistance measurements.

physics.app-ph↗

arXiv2019

Field-free spin-orbit torque switching in Co/Pt/Co multilayer with mixed magnetic anisotropies

Spin-orbit-torque (SOT) induced magnetization switching in Co/Pt/Co trilayer, with two Co layers exhibiting magnetization easy axes orthogonal to each other is investigated. Pt layer is used as a source of spin-polarized current as it is characterized by relatively high spin-orbit coupling. The spin Hall angle of Pt, $θ= 0.08$ is quantitatively determined using spin-orbit torque ferromagnetic resonance technique. In addition, Pt serves as a spacer between two Co layers and depending on it's thickness, different interlayer exchange coupling (IEC) energy between ferromagnets is induced. Intermediate IEC energies, resulting in a top Co magnetization tilted from the perpendicular direction, allows for SOT-induced feld-free switching of the top Co layer. The switching process is discussed in more detail, showing the potential of the system for neuromorphic applications.

physics.app-ph↗

arXiv2018

Determination of spin Hall angle in heavy metal/CoFeB-based heterostructures with interfacial spin-orbit fields

Magnetization dynamics in W/CoFeB, CoFeB/Pt and W/CoFeB/Pt multilayers was investigated using spin-orbit-torque ferromagnetic resonance (SOT-FMR) technique. An analytical model based on magnetization dynamics due to SOT was used to fit heavy metal (HM) thickness dependence of symmetric and antisymmetric components of the SOT-FMR signal. The analysis resulted in a determination of the properties of HM layers, such as spin Hall angle and spin diffusion length. The spin Hall angle of -0.36 and 0.09 has been found in the W/CoFeB and CoFeB/Pt bilayers, respectively, which add up in the case of W/CoFeB/Pt trilayer. More importantly, we have determined effective interfacial spin-orbit fields at both W/CoFeB and CoFeB/Pt interfaces, which are shown to cancel Oersted field for particular thicknesses of the heavy metal layers, leading to pure spin-current-induced dynamics and indicating the possibility for a more efficient magnetization switching.

physics.app-ph↗

arXiv2015

Buffer influence on magnetic dead layer, critical current and thermal stability in magnetic tunnel junctions with perpendicular magnetic anisotropy

We present a thorough research on Ta/Ru-based buffers and their influence on features crucial from the point of view of applications of MTJs, such as critical switching current and thermal stability. We investigate devices consisting of buffer/FeCoB/MgO/FeCoB/Ta/Ru multilayers for three different buffers: Ta 5 / Ru 10 / Ta 3, Ta 5 / Ru 10 / Ta 10 and Ta 5 / Ru 20 / Ta 5 (all thicknesses in nm). In addition, we study systems with a single FeCoB layer deposited above as well as below the MgO barrier. The crystallographic texture and the roughness of the buffers are determined by means of XRD and atomic force microscopy measurements. Furthermore, we examine the magnetic domain pattern, the magnetic dead layer thickness and the perpendicular magnetic anisotropy fields for each sample. Finally, we investigate the effect of the current induced magnetization switching for nanopillar junctions with lateral dimensions ranging from 1 μm down to 140 nm. Buffer Ta 5 / Ru 10 / Ta 3, which has the thickest dead layer, exhibits a large increase in the thermal stability factor while featuring a slightly lower critical current density value when compared to the buffer with the thinnest dead layer Ta 5 / Ru 20 / Ta 5.

cond-mat.mes-hall↗